Tender For Repair / Maintenance To Approach Path, Paver Blocks, Security Fencing, Posts And Other Misc Allied Works At Various Locations Of Mic&S Under Ge(S) Ahilyanagar
Tender Value
49 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ahmednagar → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair / Maintenance To Approach Path, Paver Blocks, Security Fencing, Posts And Other Misc Allied Works At Various Locations Of Mic&S Under Ge(S) Ahilyanagar
BOQ
| Sl. No. | Item Description |
| 1 | M&L for precast cement concrete block masonry with solid block of PCC (1:5:8) exc 10 cm in width and setting in cement mortar (1:6) including demolition of existing block work built in cement of any description complete all as specified and as directed. |
| 2 | M&L for brickwork with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 including demolition of existing brick work built in cement or cement lime mortar of any description complete all as specified and as directed. |
| 3 | M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 including dismantling of existing stone masonry complete all as specified and as directed. |
| 4 | M&L for flush pointing to random rubble masonry, uncoursed or brought to course in cement mortar 1:4, including racking out joints etc. complete all as specified and as directed. |
| 5 | M&L for PCC 1:3:6, type C1 (Using 20mm graded stone aggregates) as in surfaces channels and drains including necessary forms / moulds complete all as specified and as directed. |
| 6 | Extra for forming fair finished surfaces of cement concrete drain or channel, 30 cm inner girth, using extra cement including forms, moulds mitred/ stopped ends etc. complete all as specified and as directed. |
| 7 | Taking down cement plaster on walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 8 | M&L for rendering 15 mm thick on other than fair faces of brick work /concrete surfaces in cement mortar 1:4, finished even and fair without using extra cement complete all as specified and as directed. |
| 9 | M&L for PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) as in coping , cills, plinth courses, string courses, bed plates, kerbs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and as directed complete all as specified and as directed. |
| 10 | M&L for preparation of new plastered surfaces or previously untreated surface of wall and applying two coats of cement base paint over a coat alkali resistant primer complete all as specified and as directed. |
| 11 | M&L for preparation of old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and as directed. |
| 12 | Dismantling structural steel work including doors, gates but excluding framed trusses complete all as specified and as directed. |
| 13 | S&F mild steel framed work as in doors or gates of angle/hollow section or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conforming to Fe-410-W (Gde E-250) quality B all as specified and as directed. Note : Disturbed surfaces of wall shall be made good to match with the existing surfaces. |
| 14 | M&L for preparation of old treated steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 15 | Dismantling of stone slab and tiles/ interlocking paver block laid bedded and pointed in any mortar description or thickness in floors, apron etc complete all as specified and as directed. |
| 16 | M&L for chequered cement concrete tiles, glossy finish, rubberized of size 25cm x 25cm x 25mm / 30cm x 30cmx25 mm thick as in floors, set jointed and pointed in neat cement slurry with grey cement and pigments over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified & as directed. |
| 17 | M&L for machine cut Kota stone flooring 18 to 22 mm thick ( minimum size of kota stone slab 22\\"x18\\") laid over and including 20 mm thick bedding layer of cement mortar 1:6, jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed. |
| 18 | All as per item No 17.00 here in before but 15-18 mm thick as in risers to steps and skirting laid over and including backing coat of 10mm thick in cement mortar 1:3 all as specified and as directed. Note: Risers provided to steps shall be in one piece. |
| 19 | M&L for machine cut Kota stone slabs 18 to 22 mm thick as in treads of steps of stair case in single piece with 2 nos V groove cutting laid over and including 10 mm thick cement screed bed in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including, rounding and moulding edges, rubbing and mirror polishing complete all as specified and as directed. |
| 20 | M&L for 15-18 mm thick prepolished Granite stone slab of approved shade and colour as in table top, top of WHB, kitchen slab/plateform, gate pillars, cills etc or on vertical surfaces including vertical projections, including full round mouldings the edges laid over and over and including screed bed 15mm thick in cement mortar 1:4 jointing, pointing in white cement 1:2 using marble dust with admixture of pigments to match the shade of granite and rubbing polishing to achieve mirror finish complete all as specified & directed. Note:- Colour/shade to be decided by Engineer-in-Charge / GE. |
| 21 | M&L for 18 to 20mm thick machine cut granite slabs bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 20mm thick screed bed in Cement Mortar 1:6 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed. Note: Shade of granite shall be as approved by GE. |
| 22 | Earth work in excavation over areas n exc 1.5 m depth by mechanical means (Hydraulic excavator)/manually in all kind of soil including getting out and disposal of excavated earth lead upto 50 m and all as specified and as directed. |
| 23 | Returning, filling in soil, including spreading, levelling watering & well ramming in layers not exc 25 cm thick complete all as specified and as directed. |
| 24 | M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed. |
| 25 | M&L for hardcore of broken stone or boulders, guage not exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and as directed. |
| 26 | Demolition of cement concrete in ground floors and pavings n exc 15cm thick above or below ground level complete all as specified and as directed. |
| 27 | M&L for 100 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in floors,including compaction and vibration with mechanical compactor machine finished with Power Trowel cum Floater machine including necessary form work to execute work in alternate bays/panels finished even & smooth without using extra cement including necessary formwork complete all as specified and as directed. |
| 28 | M&L for forming 12mm thick and 100mm high expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound Grade 'A' complete all as specified and as directed by Engr -in- Charge. |
| 29 | M&L for 75 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in sub-base, complete all as specified and as directed. |
| 30 | M&L for 60mm thick factory made chamfered edge, cement concrete paver blocks of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed |
| 31 | M&L for 80mm thick factory made chamfered edge, cement concrete paver blocks of M-40 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed |
| 32 | Fixing only cement concrete paver blocks as in footpath, parks, lawns, drive ways or light traffic parking etc., over and including 25mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.Note: Old cement concrete paver blocks of any type and size retrieved from dismantling shall be reused under this item. |
| 33 | M&L at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 34 | S&F in repairs 110mm dia PVC (SWR) pipes, single socketed, in any length, with rubber ring joint, laid in trenches or in floors or in masonry as in spouts, weep holes etc complete all as specified and as directed. |
| 35 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing rubbish off premises etc complete all as specified and directed. |
| 36 | M&L for factory made digitally printed heavy duty coloured vitrified parking/ paver tiles 11 to 12 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600mm x 600mm) in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM 1:6 complete all as specified & directed.Note: Color, design and shade shall be as approved by Engineer-in-charge. |
| 37 | M&L for heavy duty vitrified parking tiles coloured 15 mm thick (square or rectangular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm (600mm x 600mm) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20 mm thick screed bed in CM 1:6 etc Complete all as specified & directed.Note: Color, design and shade shall be as approved by Engineer-in-charge. |
| 38 | M&L 15 mm thick full body vitrified tiles, coloured, matt finish, rectangular, area of each tiles exceeding 1.0 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement match over 20 mm thick screed bed in CM 1:6 etc complete all as specified and directedNote: Color, design, size and shade shall be as approved by Engineer-in-charge. |
| 39 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed |
| 40 | M&L for 45 to 50 mm thick precast RCC (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as in wall panels for compound wall including interlocking arragements in precast RCC columns and adjacent wall panels as per approved design/patterns, set in cement mortar 1:4, (measured solid) including all mouldings but excluding frame (columns) complete all as specified and as directed.Note: (i) The cost of reinforcement and form work shall deemed to be included in the unit rate quoted.(ii) Columns/ posts shall be measured and paid seperately under respective items. |
| 41 | M&L for precast prestressed RCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in columns, posts, boundary pillars with and including grooves to locking of precast RCC wall panels, set in cement mortar 1:4 complete all as specified and as directed.Note: The cost of reinforcement and form work shall deemed to be included in the unit rate quoted. |
| 42 | Dismantling old fencing wire mesh/chain link fencing, any description complete all as specified and as directed. |
| 43 | Dismantling fencing posts or struts (wood, steel or R.C.C.) any section, embedded in concrete incl breaking of concrete and making good distrubed ground complete all as specified and directed. |
| 44 | Excavation in post holes, in any type of soil, each not exceeding 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm thick, watering and removing surplus soil to a distance not exceeding 50m and making good surface complete all as specified and as directed. |
| 45 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc. complete all as specified and as directed. |
| 46 | S&F mild steel as in fencing posts/struts for securing barbed/chain link fencing of any description including drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 47 | S&F in repairs, galvanized, 2 strand, steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs, at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossings with and provision of galvanized mild steel wire staples or steel pins etc complete all as specified and as directed. |
| 48 | Supply only mild steel galvanised chain link fencing, made out of GI wire, any size or type, complete all as specified and directed.Note :- Dia and size of mesh shall be as decided by GE and weight of chain link fencing shall be decided by BOO ordered by GE. |
| 49 | Fixing only chain link fencing wire mesh, any size and type to any standards, angle iron posts, rails, straining bolts including provision of binding wire etc. and fixed complete all as specified and as directed. |
| 50 | S&F mild steel in flat,round or square bars as in line bars for fixing chain link fencing including cutting to length, bent to shape required, hooking ends complete all as specified and as directed |
| 51 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n.exc 5cm long and diameter of neck 11 to 15mm complete all as specified and as directed. |
| 52 | M&L for preparation of new steel and iron surfaces of any description not otherwise described exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 53 | M&L for complete removal of existing treatment from old concrete/kerbstone/plastered surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint including priming coat, complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender