Tender For Replacement/Renewal Of Certain Ber Furniture Etc At Army Area Banar Under Ge Banar
Tender Value
34.50 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
13 days left
EMD
69000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jodhpur → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Replacement/Renewal Of Certain Ber Furniture Etc At Army Area Banar Under Ge Banar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 05-Nov-2026 | CorrigendumNo.01 | Date | 23-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Almirah Large steel (FD/E6/MAP/18)The overall size shall be of 1900mm x 910 mm x 490mm made of MS sheet. The body, legs & shelves shall be made of 1mm thick MS sheet . Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. . 04 Nos adjustable shoe shall be provided to each leg . All steel surfaces ext/internal shall be powder coated with two coats of synthetic enamel paint of approved shade over a coat of red oxide primer after preparation of steel surfaces. Contrast colour shall be used for painting and colour shall be approved by GE/EIC . All joints (gaps) shall be filled with putty/primer before painting complete all as specified and directed by Engineer-in-Charge. |
| 2 | Almirah med steel (FD-1032)The overall size shall be of 1270mm x 765 mm x 440mm made of MS sheet. The body, legs & shelves shall be made of 1mm thick MS sheet. Welding process shall be of MIG or MAG. Locking arrangements shall be provided with duplicate keys. 04 Nos adjustable shoe shall be provided to each leg . All steel surfaces ext/internal shall be powder coated of approved shade over a coat of red oxide primer after preparation of steel surfaces. Contrast colour shall be used for powder coating and colour shall be approved by GE/EIC . All joints (gaps) shall be filled with putty/primer before powder coating complete all as specified and directed by Engineer-in-Charge. |
| 3 | Almirah Mess Utencil (D-93M)Top / Sides / Shutters / bottom / partition shall be made of 18 mm thick prelaminated MDF board colour/shade shall be approved by EIC/GE. Std quality magnetic catcher shall be provided to each shutters. S/S handle shall be provided to shutter / drawer as per sample kept at BSO yard. 12mm thick plywood BWR grade shall be provided on back side .Teak wood Legs frame of size 75mm X 30mm thick shall be made all around the bottom of almirah mess utencil with 02 Nos stiffener (25 x 25mm) complete as directed by Engr-in-Charge. PVC/metal corner shall be used in fabrication body/structure of item. 4 mm thick teak wood beading shall be used to exposed surfaces parts as directed by Engr-in-Charge or as shown on drg .All wooden surfaces / wood based materials shall be french polished with high class finish complete all as specified and directed by Engineer-in-Charge. |
| 4 | Bed Hard Steel (FD/E6/MAP/08(R))The complete frame work shall be made of MS square section with 18 guage thickness . Bed top shall be 12mm thick BWR grade plywood and shall be fitted with sunken nuts/bolts and washer as directed by EIC. The foot board / head board shall be covered with 18mm thick prelamintated MDF board ext grade with 0.8 mm thick PVC edging with edge bander machine, colour of board shall be approved by GE/EIC. Head rest and foot rest shall be detacheable. All metal work shall be powder coated , colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . Bottom framing work of foot rest shall be of 18 mm MS square section with 18 Guage thick shall be used. Inner hard rubber shoe shall be provided to each legs complete all as specified and directed by Engineer-in-Charge. |
| 5 | Chair dinning officers (FD/MAP-II/04)Timber shall be first class teakwood , seasoned free from knots & cracks . Seat shall be made from 75mm PU foam with 40 density pasted with adhesive on 12mm thick BWR plywood covered with fabric/tapestry. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC.PVC rings shall be screwed to each legs. All wooden portion shall be smoothened to apply best quality french polish glossy finish complete all as specified and directed by Engineer-in-Charge. |
| 6 | Chair easy (FD-229)Timber shall be first class teakwood , seasoned free from knots & cracks . canning of seat and back shall be done as per Godrej pattern with 2 mm wide half round and border with 4 mm wide half round first quality cane. PVC rings shall be screwed to each legs. All wooden portion shall be smoothened to apply best quality french polish glossy finish complete all as specified and directed by Engineer-in-Charge. |
| 7 | Chair Computer (FD/MAP/E6/01)The overall size of chairs shall be of 1050 mmx500mmx550mm . 12 mm thick hot pressed plywood shall be used in seat and back.Arm rest shall be made of PU. Seat and back shall be made of PU foam 60 mm thick with 40 density and fabric not less than Rs 350 per meter. Base shall be nylon ,synchrotilt machanism ,PVC beading on seat and back .Rest all as per existing trade pattern or sample held with BSO yard complete all as specified and directed by Engineer-in-Charge. |
| 8 | Chair Verandah (FD-256)The complete frame work shall be made of 19 mm MS round tube with 16 guage thick as per IS-4923. Chair verandah shall be weaved of with white PVC cane 1st quality 4 mm wide and half round thick as per matt pattern in place of Nylon Newar . Canning work shall be approved by EIC.Complete steel frame work shall be of white powder coated . Inner PVC shoe shall be provided to each legs complete all as specified and directed by Engineer-in-Charge. |
| 9 | Chair writing (FD/E6/MAP/12 )The overall size of chairs shall be of 820mm Hx450mm Wx450mm D . 12 mm thick hot pressed plywood shall be used in seat and back.arm rest shall be made of PU. Seat and back shall be made of PU foam 50 mm thick with 50 density and fabric not less than Rs 350 per meter. ABS in seat and back shall be provided.frame shall be made of 25 mm MS Round pipe 14 guage thick with black powder coated . Sample of chairs shall be approved by EIC/GE before supply or as per sample held with BSO Yard complete all as specified and directed by Engineer-in-Charge. |
| 10 | Charpoy IP plytop (FD/E6/MAP/01)The complete frame work shall be made of MS box section with 16 guage thick as per IS-4923.12mm thick BWR grade plywood shall be fitted on top with shunken nuts/bolts and washer as directed by EIC. Head rest and foot rest shall be detacheable. All metal work shall be powder coated , colour shall be approved by GE/EIC. All joints / gaps shall be filled with metal putty / primer before powder coating. Welding process shall be of MIG or MAG and complete . hard rubber shoe shall be provided to each legs complete all as specified and directed by Engineer-in-Charge. |
| 11 | Table Peg (FD-384)All wood work shall be first class HW well seasoned teakwood with permissible moisture contents as per IS-287-1973. Top shall be made of 18mm thick MDF board exterior grade with 04mm thick teak wood edging alround. Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg.Top side rail & centre stiffner shall be provided on bottom side rail of table irrespective of what is shown on drg.All exposed wooden surfaces shall be high class glossy polish . Polish work shall be done at BSO yard complete all as specified and directed by Engineer-in-Charge. |
| 12 | Shoe Rack Steel (FD/E6/MAP/02 (R))The overall size shall be of 880mm x 700 mm x 300mm made of CRCA round pipe. The body frame shall be made of 25 mm dia CRCA round pipe . Welding process shall be of MIG or MAG. PVC inner shoe shall be provided to each legs .All steel surfaces shall be powder coated. All joints (gaps) shall be filled with putty/primer before powder coating. Rest all as existing trade pattern/Drg complete all as specified and directed by Engineer-in-Charge. |
| 13 | Sofa Set 4 seater( 04 Single Pieces) (FD-281)All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam 40 density coverd with good quailty, tapestry cloth not less than Rs. 350/- RM with providing a chain best quality at either side of 21\\". Tapestry as per sample kept at BSO Yard. PVC shoe shall be proveded to each legs .All wooden portion shall be smoothened to apply best quality french polish glossy finish. Polish work shall be done at BSO Yard complete all as specified and directed by Engineer-in-Charge. |
| 14 | Sofa Set 5 seater 03 Pieces (FD-281)All wood work shall be first class HW well seasoned teakwood (MP) with permisible moisture contents as per IS-287-1973.Cushion for seat & back shall be 100mm thick PU foam 40 density coverd with good quailty, tapestry cloth not less than Rs. 350/- RM with providing a chain best quality at either side of 21\\". Tapestry as per sample kept at BSO Yard. PVC shoe shall be proveded to each legs .All wooden portion shall be smoothened to apply best quality french polish glossy finish. Polish work shall be done at BSO Yard complete all as specified and directed by Engineer-in-Charge. |
| 15 | Table centre (FD-274)All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973.Top shall be made of 18 mm thick prelaminated MDF board exterior grade in colour/shade as approved by EIC/GE with 4 mm thick teak wood beading complete rest all as per drg . Right bracket/ connecter shall be secrewed to the each legs as directed by EIC.Top side rail & centre stiffner shall be provided on bottom side rail of table irrespective of what is shown on drg Hard nylon shoe / buffers shall be provided to each leg.All exposed wooden surfaces shall be high class glossy french polish with spray machine . Polish work shall be done at BSO yard. Rest all as per drg complete all as specified and directed by Engineer-in-Charge. |
| 16 | Computer Table (FD/E6/MAP/03)The overall size of table shall be of 900 mmx600mmx750mm . Top shall be be made of 18 mm thick MDF board exterior grade with 2mm thick PVC edging . frame shall be made of MS powder coated with key board ,storage Drawer and mouse board complete all as specified and directed by Engineer-in-Charge. |
| 17 | Table Dining 1200x900x760mm (FD/MAP-II/03)All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top shall be made of 18 mm thick prelaminated MDF board with 04mm teak wood beading alround in colour/shade as approved by EIC/GE complete . Right bracket/ connecter shall be secrewed to the each legs as directed by EIC. Hard nylon shoe / buffers shall be provided to each leg. All exposed wooden surfaces shall be high glossy french polish . Polish work shall be done at BSO yard complete all as specified and directed by Engineer-in-Charge. |
| 18 | Table Dining 6 person (FD-273)All wood work shall be first class HW well seasoned teakwood with permisible moisture contents as per IS-287-1973. Top shall be made of 18 mm thick prelaminated MDF board with 04mm teak wood beading alround in colour/shade as approved by EIC/GE complete . Right bracket/ connecter shall be secrewed to the each legs as directed by EIC Hard nylon shoe / buffers shall be provided to each leg. All exposed wooden surfaces shall be high glossy french polish . Polish work shall be done at BSO yard complete all as specified and directed by Engineer-in-Charge. |
| 19 | Table dressing ladies with mirror with cushion stool (FD/MAP-II/07)All wood work shall be first class hard wood.Top /side/drawer/bottom/back shall be made of 18mm thick MDF board exterior grade with colour/shade shall be approved by EIC/GE. Telescopic channel shall be provided to each drawer and bottom of drawer shall be made of 9 mm thick BWR ply . 01 Nos Std quality magnetic chatcher shall be provided to each shutters. S/S handle shall be provided to drawer/ shutter as per sample kept in BSO yard. Heavy duty S/S Piano hinges shall be provide to each shutter. teakwood beading 4 mmx18mm thick shall be used to exposed susrfaces parts . Stool dressing cushion shall be 40 density with tapestry of range not less Rs. 250/RM. Quality of tapestry as per sample kept in Yard . Heavy duty reolving nylon double wheel (4 Nos) shall be used at the bottom of stool as shown on drg.All exposed wooden surfaces shall be high glossy french polish complete all as specified and directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 05, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 23, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 13 daysNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender