Tender For Restoration And Renovation Of Building Number Iso-73 Under Age B/R-Ii Under Ge Saugor
Tender Value
85.28 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
22 days left
EMD
1.52 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sagar → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Restoration And Renovation Of Building Number Iso-73 Under Age B/R-Ii Under Ge Saugor
BOQ
| Sl. No. | Item Description |
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each, complete all as specified and as directed. |
| 3 | S&F framed work such as grilis gratings, sunshed cover fixed with nut bolts incl, cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed. |
| 4 | S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & foxing in opening as per specification complete all as specified and as directed. |
| 5 | S&F factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and as directed. |
| 6 | M&L second class hardwood in scantlings, timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sq. cm & over in section, in any positio complete all as specified and directed. |
| 7 | S&F 2nd Class HW rail and style 35 mm thick Plain framed, panelled shutter with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 8 | M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 9 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 10 | M&L for 1st class hardwood in moulding sectional area n Exc 6 sqcm as in cornices, picture rails and the like complete all as specified and directed |
| 11 | M&L for Sheet glass 5.0 mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 12 | S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 13 | S&F Brass handles 150mm, cast type, polished bright complete all as specified and directed. |
| 14 | S&F Brass barrel tower bolts 300mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed. |
| 15 | S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 16 | S & F door stopper of brass alloy body and tongue 150 mm long, anodised Each fixed in door with screws etc. complete all as specified and directed. |
| 17 | Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and directed. |
| 18 | S&F Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed. |
| 19 | M&L for preparation of new steel surfaces of any description over 10 cm width or Sqm girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed. |
| 20 | S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 21 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and fair without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and as directed |
| 22 | M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1.6 complete all as specified and directed. |
| 23 | M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan in half brick thick wall built in CM 1.4 complete all as specified and directed. |
| 24 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick work finished even and fair without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and as directed |
| 25 | Demolition of brickwork or rubbled stone masonery including all qions arches Pillars etc built in Lime mortar complete all as specified and directed. |
| 26 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed. |
| 27 | M &L for Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) over and including 1mm thick wall care putty on new plastered surface complete all as specified and directed. |
| 28 | M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including demolition of old AC Sheet complete all as specified and directed. |
| 29 | S&F 0.45 mm thick galvalume sheet precoated coloured ridge corrugated suitable for profile pattern sheet fixed with self driving screws, including dismantling old plain or corrugated asbestos sheeting, any gauge, thickness complete all as specified and directed. |
| 30 | M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 1mm thick in two layers for levelling the surfaces of walls and applying two coat of acrylic emulsion over and including a coat of interior primer incl. preparation of surfaces of walls complete all as specified and directed. |
| 31 | S&F in repair 25mm dia stainless steel curtain rod not less than 0.70mm thick including fixing of sufficient brackets (minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed. |
| 32 | S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia Gl tubing and connections complete all as specified and directed |
| 33 | S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors inci fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly including taking down 15 mm dia Gl tubing and connections complete all as specified and directed. |
| 34 | S&F Gl tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia Gl tubing and connections complete all as specified and directed. |
| 35 | Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed. |
| 36 | S&F for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 37 | S&F for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 38 | S&F for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 39 | S&F for 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed. |
| 40 | S&F for 75 /90 mm dia PVC(SWR)pipes bends any radious complete all as specified and directed. |
| 41 | S&F for 110mm dia PVC(SWR)pipes junction, single (single T/Y) equal or unequal any radious with acces door, complete all as specified and directed. |
| 42 | S&F for 75 to 90 mm dia PVC(SWR)pipes junction, single (single T/Y) equal or unequal any radious.with acces door, complete all as specified and directed |
| 43 | S&F for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 44 | M&L for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement as in repair complete all as specified and directed. |
| 45 | S&F 15mm angle cock fancy type chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed and complete all as specified and directed. |
| 46 | S&F 15mm bib tap Fancy type long body chromium plated, cast copper alloy, with brass ceramic disc spindle and capston heads, scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe fixed in repair and complete all as specified and directed. |
| 47 | S&F for shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed fixed in repairs, complete all as specified and directed. |
| 48 | S&F Fixing Brass Bottle Trap for wash basin connected from wash basin coupling complete all as specified and directed. |
| 49 | S&F for in repairs Brass CP WHB mixer fancy type for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed. |
| 50 | S&F for in repairs Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed. |
| 51 | S&F for in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed. |
| 52 | Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed. |
| 53 | S & F in repair Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including dismantaling of old tank complete all as specified and directed. |
| 54 | S&F PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed. |
| 55 | S&F for in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed. |
| 56 | S&F 5mm thick, 600mm wide rounded edge mirror of selected quality glass, with back polishig mounted and fixed with stainless steel decorative cap wahsers and screws set fixed on PVC rawl plugs complete all as specified and directed. |
| 57 | S&F in repair Vitreous China wash down water closet pan 'P' or 'S' trap (pedestal pattern), white including white seat cover complete all as specified and directed. |
| 58 | S&F for of vitreous china wash basin, white, table Top of minimum size 400mmx400mmx125mm, as approved by Engineer In charge Including waste coupling, and labour for fixing mixer pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed.Note: Pillar tap and PVC connection will be measured paid separetly. |
| 59 | S&F for in repair PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed. |
| 60 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed |
| 61 | Roughning sufaces of old concrete floor by picking, sweeping cleaning and washing down with water to remove dust etc. complete all as specified and directed |
| 62 | M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 63 | All as specified above for item no 62.00 ditto but in skirting CM (1:3) 15mm thick complete all as specified and directed. |
| 64 | M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 65 | M&L Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 66 | All as specified above for item no 65.00 ditto but in skirting CM (1:3) 15mm thick complete all as specified and directed. |
| 67 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600mm x 7mm thick on vertical faces ie, as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 15 mm thick backing coat in cement mortar (1:4) complete all as specified and directed. |
| 68 | M&L Granite slab 16 mm to 18 mm thick machine cut, bedded and joined with cement and pointed with white cement with admixture of pigment to match over and including 20 mm thick screed bed CM (1:3) the shade of granite stone including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includigng rounding off the exposed edges and polishing complete all as specified and directed. |
| 69 | M&L for prepolished/mirror polished machine cut Kota stone slab 18 mm to 20 mm thick, as in flooring, laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:3 ) complete all as specified and directed |
| 70 | M&L Kota stone slab 12-15 mm thick mirror polished in skirting, steps riser etc over and including 10mm thick plaster in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 71 | M&L cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound complete all as specified and directed. |
| 72 | Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specified and directed. |
| 73 | M&L PCC (1:2:4) Type B2 using 40mm graded stone aggregate as levelling course/mass concrete complete all as specified and directed. |
| 74 | Demolition of RCC in any thicknes (reinforced cut as required to facilitate demolition) complete all as specified and directed. |
| 75 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Al. section thickness 1.50 mm). |
| 76 | S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm, shutter top & bottom of size min 20X39 mm shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket, brush and aluminium beading aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in-Charge (Al. section thickness 1.50 mm} |
| 77 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge |
| 78 | M&L for Machine pressed precast concrete interlocking paver block any shape and size using grey cement and no pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed |
| 79 | M&L for Cement concrete type, D-2, 1:4:8 (40mm graded aggregate) 100mm thick, complete all as specified and directed |
| 80 | Taking down of old roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc complete all as specified and directed. |
| 81 | M & L for PCC (1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etc on roof top as a leveling course/padding to maintain the slope, finished the surfaces even and smooth without using extra cement etc. complete all as specified and directed. |
| 82 | M&L rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab complete all as specified and directed. Note: Water roofing comound shall be measured and Paid seperately |
| 83 | Supplying only liquid waterproofing compound complete all as specified and directed. |
| 84 | (i) M&L. for provn of water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified.(ii) The surface of roof, parapet and gutters drain mouths etc. over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc. by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.(iii). Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iv). Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm(v). Laying of water proofing treatment of weight not less than 3 Kg/sqm APP modified polymeric water proofing membrane composed of 100 micron (+10%) high density polyethylene sheet (HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening, high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.(vi) Applying aluminium paint inn two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site.(vii). Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site.(viii) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all comers/timers should be rounded. |
| 85 | S&F in repair for 50mm dia PVC pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 86 | M&L for Chemical wash in stone walls, including rubbing with wire brush, cleaning algae/fungi making stone surface to natural texture surface complete all as specified and directed. |
| 87 | Taking down copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switch, sockets, c/rose, lamp holders, tube light fittings, sketch fitting , wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall floor etc. complete all as specified and directed. |
| 88 | Taking down main switch, DB/VTPN, MCCB AC box of any capacity complete all as specified and directed. |
| 89 | M&L for point wiring with 1.5 Sqmm PVC-FRLSH insulated, sheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC cassing & capping/conduit, including modular metal flush boxes & modular white cover plate with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & sheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and directed by Engr-in-charge. |
| 90 | For one light, fan point controlled by one switch |
| 91 | For one 5 Amp independent socket point controlled by one switch |
| 92 | For one 3 pin ,5 Amp socket point with other switch on the same board |
| 93 | All as per item No 89.00 here in before but for power point wiring using with 2.5 sqmm PVC-FR LSH insulated ,sheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,sheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed. |
| 94 | S&F Modular switch, one way, 6 Amp 230V, 1 module complete all as specified and directed. |
| 95 | S&F socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed. |
| 96 | S&F switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 97 | S&F socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 98 | S&F ceiling rose, surface backlit,three terminal complete all as specified and directed. |
| 99 | S&F Modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 100 | S&F modular fan step regulator 60/80W 2 module complete all as specified and directed. |
| 101 | M&L LED TL fitting 20/18 watt for surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver long life corresion resistance impact proof surface mounting IP66 Lumanires PC housing in opeal finish coverwith high brighness complete all as specified and directed. |
| 102 | S&F box type LED optic fitting 1x9 Watt 2 feet box type complete all as specified and directed. |
| 103 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 104 | S&F in replacement of 2 X 2 ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. |
| 105 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed. |
| 106 | S&F LED bulb 10 watt suitable for angle / batten holder fitting complete all as specified and directed. |
| 107 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep . Min air delivery 210 CFM with service value greater or equals 6.00 BEE. Five star rated with brushless direct current motor (BLDC) Incl hanging clamp and faternar complete all as specified and directed. |
| 108 | M&L casing n caping / pvc conduits sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified incl. taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as directed by Engineer-in-Charge |
| 109 | S&F testing and commissioning of MCB SP 6 Amp to 40 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. |
| 110 | S&F testing and commissioning of MCB SP 63 Amp 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed. |
| 111 | All as item above 107.00 but SPN 40 Amps, 240 V complete all as specified and directed. |
| 112 | S&F sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 12 way, 240 V with 200 Amps rated bus bar of suitable size complete all as specified and directed. |
| 113 | S&F double door metallic sheet metal enclosure DB double door(DPX-125 ) VTPN suitable for housing 100 MCCB as incomer 8 Way 415 Volts with 200 Amps rated copper bus bars complete all as specified and directed. |
| 114 | S&F MCCB 100 Amps 4 pole, suitable for 415 V breaking capacity 16 KA connected in wall/surface with wire and lugs complete all as specified and directed. |
| 115 | Supply and fix Water heater storage type, electric,capacity 50 litres.BEE 5 star rated incl PVC connection with fastner complete all as specified and directed. |
| 116 | Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection ccomplete all as specified and directed. |
| 117 | M&L for GI pipe bracket of size 40 mm dia medium grade of length not less than 1.5 Mtr long and bent to a shape incl fixing wall with 02 Nos MS flate clamp of suitable size incl nut bolt and washers complete all as specified and as directed. |
| 118 | M&L for provn of Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion. Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs. |
| 119 | Taking down old service cable and Supply and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 35 sqmm 3.5 core complete all as specified and directed. |
| 120 | Excavation in trenches n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for laying of cable as the case may be and getting out hard / dense soil complete all as specified and directed. |
| 121 | M&L for sand cushioning in trenches for the cable etc complete all as specified and directed. |
| 122 | Returning filling, spreading, leveling, watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed. |
| 123 | Removing excavated surplus material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr from starting point complete all as specified and directed. |
| 124 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed. |
| 125 | S&F in replacement of GI Pipe light grade 40 mm dia ISI marked on pole on wall or laid in trenches incl all fittings (nut, bolt, clamps & washers) complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 22 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 24 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender