Tender For Special Repairs To Bathrooms (Bathing) And Or Living Brks (T-31 & T-32 Of Cul-2) & Or Living Brks (T-131 Of Adm C , T-4 Of Cul-1, T-24 Of Cul-2) At North C , Mffr Under Age (I) Mffr
Tender Value
51.45 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
21 days left
EMD
1.01 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bikaner → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repairs To Bathrooms (Bathing) And Or Living Brks (T-31 & T-32 Of Cul-2) & Or Living Brks (T-131 Of Adm C , T-4 Of Cul-1, T-24 Of Cul-2) At North C , Mffr Under Age (I) Mffr
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of Wall and ceiling boards or insulation boards with Frame Of Mild Steel , any thickness,any description, including cover fillets complete all as specified and as directed by Engineer-in-Charge. |
| 2 | S&F of GI frame work for seamless ceiling comprising of GI perimeter channel .55mm thick with two un equal flanges os 20 to 30 mm and wef of 27mm fixed to surrending wall using nylon sleeves and screws at 450mm centre to centre / inter mediate channel 0.9mm thick having two equal flanges of 15mm each and wef of 45mmsuspended fromsoffit and approx 900mm centre to centre with GI cleat and steelexpansion fasterners with and including ceiling section ( not exc 1.2m length) of .55mm thickness having kurled wef of 50mm and flanges of 26mm each with lips of 10.5mmfixed to intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre. complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L for 4mm thick HPSC ( High pressure steam cured preprimed textured designer board,water resistant ,be placed in the grid system. complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 Sqm but not exc 4.0 Sqm each complete all as specified and as directed by Engineer-in-Charge. |
| 5 | Taking down old rusted and demaged steel window/vent incl. guard bar and grill where exist of size not exc 1.5 sqm each. complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required).stainless steel (SS 304 grade) body with adjustabledouble nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. complete all as specified and as directed by Engineer-in-Charge. |
| 7 | S&F Sheet glass 3mm thick, ordinary quality & glazing with oil putty in squares n.exc 0.5 sqm in each pane complete all as specified. Note - scaffolding and security arrangement will be of contractor. complete all as specified and as directed by Engineer-in-Charge. |
| 8 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 65 x 125mm comprising of virgin PVC polymer of K value 58-60(Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screwshaving minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules ofelasticity 900 N/mm2 and resistance tospread of flame of Class A category withproperty of being termite/borer proof,water/ moisture proof and fireretardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 9 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size with necessary full body threaded star headed counter sunkS.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S Sscrews shall be paid separately) |
| 10 | S&F of Factory made single extruded WPC (Wood Polymer Composite) solid plain glazed and skelleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc without sash bar, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing gauze etc, size of members as directed supplied and fixed to chowkats all as specified and directed by engr in charge |
| 11 | S & F of Stainless steel wire mesh 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples. complete all as specified and as directed by Engineer-in-Charge. |
| 12 | S&F of MS work as in hold Fast etc. complete all as specified and as directed by Engineer-in-Charge. |
| 13 | S&F of 100mm long butt hinges, SS medium weight complete all as specified and as directed by Engineer-in-Charge. |
| 14 | S&F of SS sliding door bolt 300 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete. |
| 15 | S & F of 150 mm long SS barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified complete all as specified and as directed by Engineer-in-Charge. |
| 16 | S & F of 150 mm long SS handles, oval type, stove enamelled black complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in plinth protections/hardstanding, finished even and smooth w/o using extra cement complete all as specified and as directed by Engineer-in-Charge. . |
| 19 | Taking down cement or cement lime plaster/ grit, terrazo finish of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L for Rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. (Note: Contractor shall have no claim on if plaster is carried out in patches irrespective of any height ) |
| 21 | M&L for Rendering 15mm thick on fair faces of brick in cement mortar 1:4 finished even & smooth without using extra cement with using liquid water proofing compound as per manufacturer instructions complete all as specified and as directed by Engineer-in-Charge. (Note :- Water proofing compound shall be measured and paid separately) |
| 22 | Supply only liquid integral water proofing compound ISI Marked complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L for Preparation of newly plastered surfaces of wall including cornices, pillasters etc and applying two coats of cement based paint, white or tinted over a coat of alkali resistant priming paint complete all as specified and as directed by Engineer-in-Charge. |
| 24 | M&L for preparation of new plastered surfaces of wall ,3mm thick wall care putty on wall over plastered surface to prepare the surface even and smooth and applying two coat of oil bond distemper on walls complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M & L for preparation of old surfaces by complete removal of existing treatment of walls incl paillars etc. by mechanical equipment like electric wall sander and applying two coats of oil bound distemper using rollers over a coat of primer incl 3mm thick wall care putty in two layers complete all as specified and as directed by Engineer-in-Charge. |
| 26 | M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over incl for preparation old surfaces of wall & chajjas complete all as specified and as directed by Engineer-in-Charge. |
| 27 | M&L for complete removal of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plastered surfaces and applying two coats of cement base paint over a coats of alkali resistant priming paint complete all as specified and as directed by Engineer-in-Charge. |
| 28 | M&L for Painting to new steel surfaces of any description not otherwise described over 10 cm in width or girth including preparation of surfaces, priming with red oxide zinc chrome primer (one coat) and finishing with two coats of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 29 | M&L for preparation of old /painted surfaces of steel surfaces of any description not otherwise described over 10 cm in width or girth with one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in-Charge. |
| 30 | M&L for Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer. complete all as specified and as directed by Engineer-in-Charge. |
| 31 | M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 32 | M&L for Preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint). complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 28 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender