Tender For Providing Of Open Shed Of Veh For Mt At G.S. Area Under Ge 871 Ews.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Nov 2026
3 days left
EMD
87200
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chamoli → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Open Shed Of Veh For Mt At G.S. Area Under Ge 871 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | SCHEDULE 'A' PART-I : BOQ OF WORKS FOR B/R WORKS. |
| 2 | Excavation in trenches, not exceeding 1.50mtr wide and not exceeding 1.50mtr in depth; for foundation, etc. or for laying cable, pipe lines, not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in any type of soil, complete all as specified and as directed. |
| 3 | Excavation in trenches, not exceeding 1.50mtr wide and not exceeding 1.50mtr in depth; for foundation, etc. or for laying cable, pipe lines, not exceeding 10 Sqm on plan and not exceeding 1.50 mtr in depth and getting out, in Soft/ disintegrated, complete all as specified and as directed. |
| 4 | Removing excavated materials exceeding 250 metres not exceeding 500mtrs and depositing where directed, complete all as specified and as directed. |
| 5 | Plain cement concrete M-10(1:3:6), type C-2 (using 40mm graded crushed stone aggregate), as mass concrete in foundation filling, complete all as specified and as directed. |
| 6 | Plain cement concrete, M-7.50 (1:4:8), type D-2 (using 40mm crushed stone aggregates) 100mm thick, as in sub base of flooring, to receive floor finishes, complete all as specified and as directed. |
| 7 | Sand cushion with clean river sand duly clear of residual, organic and deleterious materials spread evenly to uniform thickness 10mm thick, complete all as specified and as directed. |
| 8 | HDPE sheet (Virgin Quality) 400 micron thick, water proof, wrinkle free without puncture having minimum weight 390 gm/ Sqm over tack coat/ sand cushion with overlap between adjacent strips and a transverse joints as minimum 300mm, complete all as specified and as directed. |
| 9 | Cement concrete work in pavement/ hard-standing of flexural strength 40 Kg/ per square centimetre in field using 400 Kg of cement per cubic metre, thickness of concrete 25Cm or less, complete all as specified and as directed. |
| 10 | Forming Construction joints 200mm deepx10mm wide, filled with sealing compound grade ‘A’, complete all as specified and as directed. |
| 11 | Forming Contraction (Dummy) joints 65mm deepx10mm wide, filled with sealing compound grade ‘A’, complete all as specified and as directed. |
| 12 | Rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.confirming to Fe 410-W (Gde- E- 250) quality- A, complete all as specified and as directed. |
| 13 | Rolled mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S-1161: 1979 grade St.-240, complete all as specified and as directed. |
| 14 | Rolled mild steel as in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; handmade sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and as directed. |
| 15 | Rolled mild steel as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in base plates/ gusset plate, cleats for securing purlins/ rafters and similar articles, conforming to Fe-290 (Gde E- 165), complete all as specified and as directed. |
| 16 | Pre-painted galvalume aluminium zinc coating galvanised iron based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed. |
| 17 | Pre-painted galvalume aluminium zinc coating galvanised iron based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specifed and directed. |
| 18 | Preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10cm width or girth including and applying two coats of synthetic enamel paint over one coat of zinc chrome/ red oxide primer, complete all as specified and as directed. |
| 19 | Painting lines, dashes, arrows, letters, etc. on roads, pavements and the like exceeding 10cm wide with road marking paint of white or golden yellow colour with adequate Nos of coats, complete all as specified and as directed. |
| 20 | SCHEDULE 'A' PART-II : BOQ OF WORKS FOR E/M WORKS. Please Enable Macros to View BoQ information |
| 21 | SCHEDULE 'A' PART-II : BOQ OF WORKS FOR E/M WORKS. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender