Tender For Establishment Of May I Help You Desk In Ground Floor Of Pmssy Block In Government Mohan Kumaramangalam Medical College Hospital At Salem.
Tender Value
3.24 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
15 days left
EMD
3250
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of May I Help You Desk In Ground Floor Of Pmssy Block In Government Mohan Kumaramangalam Medical College Hospital At Salem.
BOQ
| Sl. No. | Item Description |
| 1 | Providing Modular Reception Table of size 4.90 x 0.60m width at top and 0.90m height from finished floor level made out of 18mm thick best quality water proof ply wood as per IS303 (1989) for the top, vertical & horizontal planks. A file tray under the table top and foot rest are provided in the table. All the exposed surface of 18mm thick plywood are finished with best quality 1mm mica sheet as directed by the departmental officer and The plywood cutting edges are finished with 2mm thick PVC Edge banding etc., complete complying with standard specifications and as directed by the departmental officers. The cost includes cost of the materials, labour including supplying, erecting and fixing in position, conveyance and etc., Complete complying with standard specifications and as directed by the departmental officers.(The conference hall \\"U\\" shaped (Rectangular) table should be got apporved by the Executive Engineer before delivery). |
| 2 | Providing Wall Panelling using one side teak wood sheet with melamine polishing with following specification. The frame using aluminium tubular section of size 50mm x 25mm x 2mm thick fixing horizontally and vertically in position with wall at interval of 0.60m in both directions, fixing water proof plywood of 12mm thick over the aluminium frame work with necessary screws. One side teak wood sheet of 3.5mm thick will be fixed over the plywood using fevicol and finishing with melamine polishing and the rate inclusive of conveyance to site and labour charges and as directed by the Departmental Officers. The design pattern, water proof plywood, OST sheet and other materials to be used shall be got approved by the Executive Engineer concerned before use on work etc., complete. |
| 3 | Supplying and laying wooden flooring at site 8mm thick of approved make using click laminated floor with in built 3mm sound block class of use 31 water resistant AC 3 grade impact resistant IC3 (as per EN 130 900 / 1400) having 0.60mm MLC (Multi-Layer Guard + SRSG 2) (Scratch Resistant Surface Second Generation) on top of moisture high density fibre board substrate specially developed copy of plank size 1288 x 196 x 8mm having joints tongue and groove secure long lasting joint. The tongue and groove having the edges duly pre impregnated with par affineincluding laying 0.20mm thick alkali resistant polyethylene sheet of density 850kg /m3 beneath the laminated wooden panel to absorb the sound caused including labour charges, loading, unloading, transportation, etc complete |
| 4 | Supplying and placing of “S” type chair of size 18”x18” made out of Hardwooden frames with high quality Nylon wire net and hard wood seat frame,back frame , arms are finished with good quality malamine polish. The ‘S’ type steel frames are madeout of 14 gauge and powder coated C.R pipes fixed with appropriate PVC bush at bottom of the frame, The cost includes cost of materials cost of primer, enamel paint and labour charges for fabrication, cutting, bending, grinding, painting, power consumption for fabrication, loading, Unloading and conveyance and supplied at work site etc.,complete complying with standard specification and as directed by departmental officers.( The “S” type chair should be got apporved by the Executive Engineer before delivery). |
| 5 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender