Tender For Establishment Of 33/11 Kv Ss With 2X8 Mva , 33/11 Kv Power Transformer At V.Kumaramangalam In Cuddalore Edc In Villupuram Region Of Tnpdcl Under Turnkey Basis.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Nov 2026
21 days left
EMD
1.21 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Establishment Of 33/11 Kv Ss With 2X8 Mva , 33/11 Kv Power Transformer At V.Kumaramangalam In Cuddalore Edc In Villupuram Region Of Tnpdcl Under Turnkey Basis.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule I |
| 2 | Schedule II |
| 3 | GST Amount (Total GST Amount @18%) |
| 4 | 33KV CT (600-300-150/1A), outdoor type |
| 5 | 11KV CT (1200-600/1-1A), outdoor type |
| 6 | 11KV CT (400-200/1-1A), outdoor type |
| 7 | 33KV Potential Transformer with TC (Single phase unit) |
| 8 | 11KV Potential transformer with TC (Three phase unit) |
| 9 | 33KV Centre rotating AB switch without Support Structure |
| 10 | 11KV AB switch centre rotating without Support Structure. |
| 11 | Supply of reputed make long shackle 6lever Navtal lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer. |
| 12 | Supply of flexible copper tape 25x3sqmm /12mm rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer |
| 13 | 33KV Lightning Arrester Station type |
| 14 | 11KV Lightning Arrester Station Type |
| 15 | 11KV Lightning Arrester Distribution Type |
| 16 | AC Panel for 33KV SS |
| 17 | 110 V DC annunciation panel Type B |
| 18 | 110V DC indoor C&R Panel for GC Breaker |
| 19 | 110V DC indoor C&R Panel for LV Breaker |
| 20 | 110 V DC indoor C&R Panel for Twin feeder |
| 21 | 110V, 120AH Battery set with stand |
| 22 | 110V, DC 24A, Battery charger |
| 23 | 14Core x 2.5 Sq.mm Copper cable armoured |
| 24 | 8Corex 4 Sq.mm Copper cable armoured |
| 25 | 4Core x 4 Sq.mm Copper cable armoured |
| 26 | 4Core x 2.5 Sq.mm Copper cable armoured |
| 27 | 2Core x 2.5 Sq.mm Copper cable armoured |
| 28 | 2CoreX16 sq.mm copper power cable |
| 29 | Zebra ACSR conductor |
| 30 | Supply of eye bolt of 18-20mm dia GI rod of required length suitable for 33KV,22KV and 11KV strung bus including cost of GI rod and 2 Nos GI nuts & washers as directed by the field Engineer |
| 31 | clamps & Connectors |
| 32 | Tension fitting Clamp 4 Bolted for Zebra |
| 33 | T Clamp for 2\\" Bus to Single Zebra |
| 34 | T Clamp for Zebra to Zebra |
| 35 | Switchend clamp for Single Zebra |
| 36 | Switchend clamp for 2\\" Busbar |
| 37 | Reducer clamp for 2\\" Bus to Zebra |
| 38 | PG Clamp for Zebra |
| 39 | Free end clamp for 2\\"Busbar |
| 40 | Corana Bell for 50mm Bus Bar |
| 41 | Switch end clamp for Mink |
| 42 | Seating Block for 2\\" Bus bar(for giving Elect Conn) |
| 43 | Supply of CT/PT junction box made out of 14Swg (2mm) M.S.Sheet wherever required as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400W x 300H X 150D |
| 44 | Fabrication, supply and fixing A.C.distribution box of size 750x750x250 mm out of 14SWG (2mm) M.S.Sheet including primer paint coat, Supply, Fabrication and Erection of Fixing Flat using 65x10MSF, supply & fixing of 3 nos 200A and 6 nos 100A Porcelain fuse units, Supply and Painting of Two coat of Enamel Paint including cost of materials, consumables, fright, etc., as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB, detachable gland plate and locking arrangements. |
| 45 | Supply of mounting channel suitable for CBTM 5 terminal block in panel /box as required and as directed by the field Engineer. |
| 46 | Supply of disconnected type terminal block suitable for CT Circuits in panels/ box as required & as directed by the field Engineer |
| 47 | Supply of ISI mark bakelite HRC fuse holder of reputed make in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. |
| 48 | 16Amps |
| 49 | 63Amps |
| 50 | Supply of ISI mark HRC Fuse of reputed make in panels/ boxes for AC/DC/PT Circuits wherever required as directed by the field Engineer |
| 51 | 2/5/10/16Amps |
| 52 | 63Amps |
| 53 | Supply of various types of hot dip galvanised fabricated steel structures confirming to IS 2062 Gr A at site as per the std.design/ Drawing, including Freight & Handling, Loading, unloading, Labour, machinery and Consumables and as directed by the field Engineer at the SS site. |
| 54 | 33 KV Four Pole structure (Incomer) |
| 55 | 33 KV Strung Bus structure |
| 56 | 33 KV Power Transformer Gantry structure |
| 57 | 33 KV AB switch structure (1.8 m centre) |
| 58 | 33 KV Pie Support Structure (1.8 m centre) |
| 59 | 33 KV LAS Structure under Strung Bus (1.8 m centre) |
| 60 | 11 KV Feeder Bay structures with 6Bays + 2LV |
| 61 | 11 KV Station Transformer structure |
| 62 | Supply of ISI mark bakelite HRC fuse holder with fuse of 2/5/10/16 Amps reputed make in panels/ boxes for AC/DC/PT circuits wherever required as directed by the field Engineer. |
| 63 | Heavy section using RSJ 250 x 125 mm /200X100mm |
| 64 | Light section (other than heavy section) |
| 65 | Supply of various types of mild steels including Cost of steel, Freight & Handling confirming to IS 2062 Gr A at site, Fabricating the steels in to specified structures as per the std.design/Drawing, Painting of Primer coat of Redoxide paint with supply of reputed make paints after proper surface preparation such as cleaning of rust scales using appropriate machinery including all Labour, machinery and Consumables and as directed by the field Engineer at the SS site. |
| 66 | 33 KV Breaker Platform |
| 67 | 11 KV Breaker Platform |
| 68 | Yard Fire Stand frame with top canopy cover |
| 69 | Battery Room Fire Stand |
| 70 | AC Junction Box fixing frame |
| 71 | 11 KV/433 V 100 KVA Station Transformer |
| 72 | 11 KV Horn gap fuse with insulator |
| 73 | Supply of 50mm Aluminium Bus bar |
| 74 | Supply of 1000V/2000 MOhm Hand operated Meggar |
| 75 | Supply of Digital Multimeter as per IS standards |
| 76 | Supply of Mechanical Foam Portable fire extinguishers with initial charge complete with chromium plated GM cap, high pressure nylon braided discharge hose with specially designed foam designed nozzle and in general all accessories strictly confirming to the latest issue of ISI Certification mark |
| 77 | 50 litre trolly mounted |
| 78 | 9 litre portable |
| 79 | Supply of Dry Chemical Powder type trolley mounted Cylindrical shape 25KG capacity fire extinguisher with initial charge & complete with rubber or braided hose, dry powder level indicator and all accessories confirming to the latest issue of ISI Certification mark |
| 80 | Supply of Dry Chemical Powder type Cylindrical shape 9/10 KG capacity fire extinguisher with initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI Certification mark |
| 81 | Supply of Portable Dry Chemical Powder type cylindrical shape 5/6 KG capacity fire extinguisher wilth initial charge & complete with rubber or braided hose, dry powder with level indicator and all accessories confirming to the latest issue of ISI certification mark. |
| 82 | Supply of Fire/Water bucket of 10 lit capacity made out of 26Swg (0.46 mm) M.S.Sheet painted with white & red enamal paint in side & out side respectively bottom of bucket shall be ` U ` shapped out side of the bucket shall be written as Fire in English /Tamil in white enamal paint including cost of all materials. |
| 83 | Supply of Telescopic earth rod with copper wire 10 feet (SS type) as per IS Standard as directed by the field Engineer. |
| 84 | Supply of Discharge rod 10 feet (SS type) as per IS Standard as directed by the field Engineer. |
| 85 | Supply of First Aid Kit |
| 86 | Supply of Enamel Paint including cost of paint, brush and consumables etc., |
| 87 | Supply of PVC stickers for Breakers, Panels, chargers and General Key Boards as required and as directed by field engineer |
| 88 | Supply of LC/ Key board of size 4x3 feet out of 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing along with hook for keys with token and as directed by the field Engineer including cost of all materials. |
| 89 | Supply and Erection of Rubber mat of size 2000 × 1000 × 10 mm as directed by the field Engineer. |
| 90 | 22kV PT Insulators |
| 91 | 11KV PT Insulator |
| 92 | 11KV, 120KN Disc insulators (Antifog) |
| 93 | Supply and provision of M8, M10, M12 and M16 (full /Half thread) G.I.bolt and nuts of various sizes including plate/ spring washers as required and as directed by the field Engineer. |
| 94 | Labour for erection using contract crane and including fixing of tandom rod alignment & gas filling by proper tools and tackles etc., as per standard 33/22/11KV VCB/SF6 Circuit Breaker. |
| 95 | Labour for erection of 33/22/11KV CT, (one S.Ph or 3Ph. Unit) with provision of hardwares,etc.Using manual labour. |
| 96 | Labour for erection of 33/22/11KV , PT, (one S.Ph or 3Ph. Unit) with provision of hardwares,etc. Using manual labour |
| 97 | Labour Charge for assembling of panel, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.(Simplex indoor/outdoor). |
| 98 | Labour Charge for assembling of battery charger, including supply & fabrication of MS flat 65x10mm for mounting arrangement and earthing of panel including hardwares.(Simplex indoor/outdoor) |
| 99 | Labour for erection of battery set including two coats of painting of Acid proof paint on wooden stand and neatly stacking the battery cells and fixing of connecting plates.110V,300AH |
| 100 | Labour, consumables for the Initial filling and first charging of the battery to the required mAH input and thereafter atleast 3 cycles of charge/ discharge of the battery set till the battery is charged to its full capacity as directed by the fiald engineer along with tools for charging of battery 110V,300/120AH |
| 101 | Labour for laying of cable in duct/ trench including the cost of Aluminium tag for identification. Upto 8Core. |
| 102 | Labour for laying of cable in duct/ trench including the cost of Aluminium tag for identification. Above 8core |
| 103 | Labour for laying of cable & clamping in structure Upto 8 Core |
| 104 | Labour for laying of cable & clamping in structure above 8 Core |
| 105 | Labour charges for laying of 2C x 16 Sq.mm Copper Power cable armoured |
| 106 | Supply and glanding of ISI mark cable gland of suitable size of reputed make including removing of insulation of cables and providing suitable holes as required and as directed by the field Engineer. |
| 107 | Supply and termination of cable core end dressed neatly including the cost of cable socket (lug) ferrules, sleeves, tags, ties, stropes, etc., as directed by the field Engineer. (No.of core ends in unit of 1000). |
| 108 | Labour for excavation & refilling of trench of avg. width of 0.3mts & avg depth of 0.4m for control cables (including Power cable) & Yard light cable |
| 109 | Labour for erection of LAS including erection of base if required Station type single/ Double pole stack 33 or 22 or 11KV with provision of hardwares,etc.,. |
| 110 | Labour for erection of strung bus and strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 33/22/11 KV Single Zebra Conductor (1 span=3 runs). |
| 111 | Labour for erection of single / double pole stack up right, under hang or suspension.33KV or 22KV or 11KV insulators. |
| 112 | Labour for providing Droppers and jumpers |
| 113 | Labour for erection of 33/22 / 11KV/433V distribution transformer with using crane with provision of hardwares,etc., |
| 114 | Labour for erection of HG fuse 3pole set 33 KV or 22 KV or 11KV |
| 115 | Labour for erection of CT/PT junction box ,AC distribution box, yard light box,change over switch including fabrication of clamping arrangements with provision of hardwares,etc., |
| 116 | Labour for erection of AC junction Box |
| 117 | Supply and fixing of MCB of Havells/Schneider/MDS/ reputed make with ISI mark whereever required as directed by the field Engineer. |
| 118 | 32 Amps - 3 Phase, 4 Pole |
| 119 | 16 AMPS - single phase, single pole |
| 120 | Fixing of terminal block /disconnected type terminal block as required and directed by the field Engineer |
| 121 | Fixing of all types of fuse holder and fuse of all range whereever required as directed by the field Engineer |
| 122 | Fixing of AC/DC change over switch wherever required and as directed by the field Engineer. |
| 123 | Labour for erection of Isolator / AB Switches, including erection of insulators and alignment works with provision of hardwares,etc., without earth hand operated 33 or 22 or 11 KV. Including Sethiyathope 110/33-11kv ss |
| 124 | Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer |
| 125 | Labour for the Erection of the fabricated steel structures at the SS site with Supply of GI Bolts, Nuts & Washers (Spring/Flat as required) confirming to IS including Labour, machinery and Consumables as required & as directed by the field Engineer. |
| 126 | 33 KV Four Pole structure (Incomer) |
| 127 | 33 KV Strung Bus structure |
| 128 | 33 KV Power transformer Gantry structure |
| 129 | 33 KV AB Switch structure(1.8m center) |
| 130 | 33 KV pie support structure(1.8m center) |
| 131 | 33 KV LAS Structure under Bus bar(1.8m center) |
| 132 | 11 KV Feeder Bay structures with 6 Bays + 2 LV |
| 133 | 11 KV Station Transformer structure |
| 134 | Non-specified structures, Extension, Alterations, and Deductions as per station requirement. |
| 135 | Heavy section using RSJ 250 x 125 mm / 200 x 100 mm |
| 136 | Light section (other than heavy section) |
| 137 | Other station structure |
| 138 | 33 KV Breaker Platform |
| 139 | 11 KV Breaker Platform |
| 140 | Yard Fire Stand frame with top canopy cover |
| 141 | Battery Room Fire Stand |
| 142 | AC Junction Box fixing frame |
| 143 | Supply and Erection of 5m Grouting type lamp post of B class MS pipe (3 inch dia for 3mtrs & 2.5inch dia for 2mtrs) including single/double fitting (Straight or 'V' type) fixing arrangements, 1 inch dia B class pipe arms, yard light box fixing flat and one coat of redoxide and one coat of aluminium paint. |
| 144 | Supply and Erection of reputed make street light fitting with 1x(70-75)W or 2x(35-40)W, 240V CGL/ PHILIPS make LED Light. |
| 145 | Groutbolt |
| 146 | Supply of Erection of yard light fuse unit mounting box of size 200x200x150mm (BxHxD) out of 18 SWG (1.22mm) M.S Sheet including primer paint as per Drawing including the Supply, Fabrication and Erection of Box fixing Flat using 50x8MSF, Two coat of enamel paints, provided with 16/20A rewirable Porcelain Fuse carrier unit, 16 A Bakelite connenectors including its cost materials, consumables, freight, etc and as directed by the fiels Engineer on site requirements. (The box shall be vermin proof, shall be provided with sturdy hinges, with provision for cable entry and locking arrangements). |
| 147 | Labour for erection of Bus bar with bends wherever necessary using 50mm IPS Aluminium tube. |
| 148 | Supply of Fabricated main equipment board 2500 X 1500 mm out of 14 SWG M.S Sheet, alongwith painted MS Channels(100 x 50 MM) and MS Flat(65x65x6) (50x50x6) (50x6) and mounting the Board on to a Structure with all reuqired hardware. |
| 149 | Labour charges for two coats of enamel painting in substation structures, steels etc., including the cost of reputed make paints and other consumables as directed by the field engineer. |
| 150 | 33/22 KV Breaker Platform. |
| 151 | 11 KV Breaker Platform |
| 152 | Yard Fire Stand frame with top canopy cover |
| 153 | Battery Room Fire Stand |
| 154 | AC Junction Box fixing frame |
| 155 | Supply & Labour charges for two coats of enamel painting in any substation structures, steels, etc and wherever required including the cost of reputed make paints and other consumables as directed by the field engineer. |
| 156 | Labour charges for writing details in any finished surface boards including cost of enamel paint (Dulex,Asian,Berger preferred) and other consumables as directed by the field engineer |
| 157 | Fixing of PVC stickers for Breakers,Panels,chargers and General Key Boards and other works etc, as required and as directed by field engineer. |
| 158 | Erection of LC/ Key board as directed by the field Engineer including cost of all materials. |
| 159 | Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer. |
| 160 | Supply of various types of Steel materials confirming to ISS 2062-Gr A including, Freight, Handling etc., at site for Earthing with Labour for Fabrication & erection for Earthing including Labour, Machinery and Consumables as Required and as directed by the Field Engineer. |
| 161 | Labour for excavation (800m x 0.30m x 0.50m) with depth and refilling of soil for earth mat |
| 162 | Providing Earth bore 140/150mm dia using power rig or 100/125mm dia using hand bore set including the labour, lead, lift etc., sedimentary strata of clay & sand stone shale pebbles boulders etc., for earth Pits with supply and providing of Bentonite powder (Sodium Bentonite) 5Kg/Mtr depth of the bore mixed with low resistivity earths as directed by the field Engineer ( Earth to be supplied by the contractor) |
| 163 | Supply and providing of 450-600 mm dia, 300 mm height, 36mm thick cement collar for identification of earth electrode location as diredted by the field engineers. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender