Tender For Repair To Roof, Chajja Facia And External Plaster In Sect-B Under Age B/R Ii At Chandimandir Mil Stn
Tender Value
49 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
18 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panchkula → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Roof, Chajja Facia And External Plaster In Sect-B Under Age B/R Ii At Chandimandir Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of brick tiles laid or bedded in cement mortar complete all as specified and directed |
| 2 | Demolition of mud phuska as in roof of any thickness incl plastering and leeping etc (whether full thickness removed or only a part thereof), removal of debris complete all as specified & directed. |
| 3 | Providing plain cement concrete 1:2:4 type B0 (12.5mm graded stone aggregate), 40mm thick (averaging), as in leveling course on roofs, complete all as specified and directed. |
| 4 | Rendering 15 mm thick, finished even and fair on rof slab in cement mortar 1:4 using water proofing compound @ 2% by weight of cement complete all as sppecified. Note:- (WPC will be measured and paid seperately) |
| 5 | Supply only Integral waterproofing compound, all as specified. |
| 6 | APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric laid over and including priming surfaces with primer of same manufacturer @0.400Litre/Sqm and laying App membrane on Primed surface by torch application and sealing all joints and overlapping min 10cm, including removal of bituminous felt incl wire brushing and cleaning top surfaces of concrete complete all as specified & directed. |
| 7 | APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3 mm thick reinforced with polyester non woven fabric laid over and including priming surfaces with primer of same manufacturer @0.400Litre/Sqm and laying App membrane on Primed surface by torch application and sealing all joints and overlapping min 10cm, and applying two coats bituminous based aluminium paint @ 0.20 Kg/sqm over exposed APP sheet with and including removal of exiting bituminous felt incl wire brushing and cleaning top surfaces of concrete complete all as specified & directed. |
| 8 | Machine pressed precast concrete tiles 25cm x 25cmx 20 to 22 mm thick laid with grey cement and no pigment over and including bedding layer of 15mm thick in cement mortar 1:4 jointed and pointed flush in CM 1:3 complete all as specified and directed. |
| 9 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning works etc and hoisting if required reconnecting and refixing in position of capacity exc 250 ltrs but n.exc 500 ltrs, complete all as specified & directed. |
| 10 | Disconnecting existing tanks, setting aside (or lowering if required) for repair, cleaning works etc and hoisting if required reconnecting and refixing in position of capacity exc 500 ltrs but n.exc 1000 ltrs, complete all as specified & directed. |
| 11 | Demolition of RCC tanks upto 500 ltrs capacity and clearing all debris from roof and site and removl outside MOD land complete all as specified and directed. |
| 12 | Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 250 but n.exc 500 litres and from mouths of circulating pipes etc complete all as specified and directed. |
| 13 | Cleaning and removing all scale and dirt etc from overhead water storage tanks of capacity exc 500 but n.exc 1000 litres and from mouths of circulating pipes etc complete all as specified and directed. |
| 14 | 15 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections 15mm bore complete all as specified and directed. |
| 15 | 20 mm bore Galvanized Steel tubes, medium grade including all fittings for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors, including taking up or down steel tubing and connections 20mm bore complete all as specified and directed. |
| 16 | 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, fixed as in repair complete all as specified and directed. |
| 17 | 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) double layered, white in colour, screwable lid, hoisted and fixed in position, including PTMT ball valve 20mm bore & PTMT tank nipple, fixed as in repair complete all as specified and directed. |
| 18 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc complete all as specified and directed. |
| 19 | Brick work with sub class ‘B’ bricks, old size bricks, straight or curved on plan exc 6 metre mean radius built in cement mortar 1:6 complete all as specified & directed. |
| 20 | Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed. |
| 21 | Rendering 15mm thick plaster in cement mortar 1:4 mixed with WPC, on fair faces of brick wall or on cocnrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. Note :- WPC will be measured & paid separately as supply only). |
| 22 | Rendering 15mm thick in Cement and Sand mortar 1:6 over brick or concrete surfaces finished even and smooth without using extra cement in patches complete all as specified and directed. |
| 23 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 24 | Applying a layer of interior/exterior wall care putty on newly plastered surfaces complete all as specified and directed by engineer-in-charge. |
| 25 | Applying 2 coats of modified acrylic exterior emulsion having excellent scrub and peel resistance, superior whiteness, excellent finish, resistance to fading of colours, advanced anti fungal and algal protection against all round weather and paint performance of Min. 4 years so as to obtain as acceptable finish all as per manufacturer's instruction and directed by engineer-in-charge |
| 26 | 10mm thick rendering in cement and sand mortar 1:3 on ceilings, chajja ceiling etc up to 12 mtr height, finished even and smooth without using extra cement complete all as specifed and directed |
| 27 | Preparation of new plastered surfaces of walls and applying two coats of oil bound distemper on ceiling surfaces complete all as specified and directed. |
| 28 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings complete all as specified & directed by Engineer-in-charge. |
| 29 | Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour, having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 30 | Pre-painted galvalume aluminium zinc coating GI base plain steel (AZ-70) sheet 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-charge. |
| 31 | 2mm thick fibre glass reinforced translucent corrugated/ plain sheeting with two corrugation side lap fixed with coach screws and washer in roof, wall etc, fixed as in repair complete all as specified and directed. |
| 32 | Excavation in post holes n.exc 0.50 cu m getting out, returning, filling and ramming earth watering and removing surplus soil not exc 50 m in any type soil complete all as specified and directed. |
| 33 | Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in foundation, for fencing post complete all as specified & directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 35 | Hollow sections as in main and cross beams, columns, hip and jack rafters; purlins where connected to common rafters of angle, pipe sections for shads /sunshades etc complete all as specified and directed. |
| 36 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of inserting sheets, landings, steps, cills, sunshades, shelves, lintels, etc,; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and as directed. |
| 37 | Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings and similar work conforming to Fe 290-0 or Fe 165-0, all as specified and directed. |
| 38 | Two coats of synthetic enamel paint on steel and iron surfaces over one coat of red oxide primer on surfaces over 10 cm width or girth including preparation of new surfaces complete all as specified & directed. |
| 39 | PVC (SWR) rain water pipe, 110mm bore, single socketed in any length with rubber ring joints, fixed to walls with MS clamps and PCC in hold fast etc and making god the disturbed surface of wall with cement mortar 1:4 and including taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store complete all as specified and directed. |
| 40 | 110 mm bore PVC (SWR) bend for rainwater pipes fixed to top and bottum of rain water pipe walls with and making good the disturbed surface with cement mortar 1:4 etccomplete all as specified. |
| 41 | Demolition of cement concrete (unreinforced) any description and in any position (below or above ground level), not otherwise specifically provide complete all as specified. |
| 42 | Plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in lintels up to 1.5 m clear span, cills, steps, seismic and other similar bands, hold fast, plinth courses, string courses, lacing courses, parapets and railings up to 60 cm in height, copings, kneelers, apex stones, bed plates, water through and the like including weathering, slightly rounded or chamfered angles and throating including use of form work (straigth or curved) complete all as specified & directed (Note :-reinforcement where provided shall be measured and paid seprately) |
| 43 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid, bedded or laid bedded pointed in any mortar, all as specified. |
| 44 | Rubber moulded chequered cement concrete tiles any size (300x300 or 400x400 mm and 25 mm thick as required), set, jointed and pointed in neat cement slurry in roofs with grey cement and pigment laid over and including 15mm thick screed in CM 1:6 complete all as specified and directed. |
| 45 | Glazed coloured ceramic tiles in vertical surface 350mm x 250mm x 7mm /450mm x 350 x7mm thick, set and jointed in neat cement slurry over 10mm thick thick rendering in cement mortar 1:4, for receving the tiles complete all as specified and directed. |
| 46 | Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed. |
| 47 | Vitreous china, wash down water closet pan, white, Pedestal pattern WC with ‘P’ or ‘S’ trap, with all fittings and connection, fixed as in repair complete all as specified and directed. |
| 48 | PVC valve less syphonic action type flushing cistern low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC bend for squat pedastal pattern , fixed as in repair complete all as specified & directed. |
| 49 | Plastic water closet seat cover white closed pattern with flat bottom mild steel chromium plated or aluminium hinging device, fixed as in repairs, complete all as specified and directed. |
| 50 | Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, fixed as in repair complete all as specified and directed. |
| 51 | Wash hand basin, vitreous china, flat back , white of size 550X400mm, including brackets of suitable size, fixed as in repair complete all as specified and directed. |
| 52 | Central hole Basin Mixer, without popup waste system with 450mm long copper pipes and brass nuts, cast copper alloy, chromium plated, screwed for iron pipe or for union, suitable for 15mm bore pipe, fixed as in repair complete all as specified and directed. |
| 53 | Wall mixer, mix for mixing hot or cold water, chromium plated suitable for 15mm bore GI pipe or union, fixed as in repair complete all as specified and directed. |
| 54 | 15mm bore angle valves, cast copper alloy, fancy type chromium plated, screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions, fixed as in repair complete all as specified and directed. |
| 55 | 15mm bore Bib taps, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and directed. |
| 56 | Chromium plated, fancy type shower rose with swivel joints 125mm dia with arm and fixing to steel pipe 15mm bore, fixed as in repair complete all as specified and directed |
| 57 | Towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 190gms), fixed as in repair complete all as specified and directed. |
| 58 | Beveled edged looking mirror of size 600mmx450mm of selected quality, glass 6mm thick, mounted on 6mm thick comercial plywood and fixed to wooden plugs with choumium plated brass screws and cup washer complete, all as specified and directed. |
| 59 | Taking down chowkats or frame not exc. 1.5 Sqm with shutters, without taking off shutters from the frame, complete all as specified and directed. |
| 60 | Taking down shutter of any description exc 1 Sqm but n.exc 2 Sqm each complete all as specified and directed. |
| 61 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 62 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-in- Charge |
| 63 | Butt hinges 100mm long, of stainless steel with galvanised mild steel hinge pin, complete all as directed. |
| 64 | 150mm aluminium anodized barrel tower bolts of extruded section complete all as specified and directed |
| 65 | 125mm aluminum handle (ISI Marked) cast type anodized, fixed as in repair complete all as specified |
| 66 | Treating efflorescence on walls upto 0.3mtr above the affected surface, by using polymer based chemical (URP) of Dr Fixit or equivalent treatment including taking down plaster , scrubbing & cleaning of surface properly and applying muriatic acid with water in ratio 1:12, using a salt neutralizer before applying a water based efflorescence remover and finally seating the surface with polymer based chemical to resist further damage or as per manufacturer’s specification complete all as specified and directed. |
| 67 | Change of PVC trap (any type) after demolition of PCC and tiling, fixing it in new or old position as required and packing with PCC complete all as specified and directed. |
| 68 | Providing cement concrete type E2, 1:5:10 using 40 mm graded stone aggregate, as in foundation, mass concrete etc., complete all as specified and as directed |
| 69 | Water proofing treatment to SUNKEN PORTION incl bottom floors and adjoining walls of WC, Bath & Toilet, etc. : Preparation :- Concrete surface to be cleaned properly from dust, loose particles, and any type of roots of trees, algae or fungal growth.Repairing :- Surface irregularities, damaged concrete and surface cracks, if any with latex polymer , SBR latex or equivalent modified repair mortar incl all M&L .The surface then shall be primed using high pressure water jet or other method properly pre wetted to SSD condition before coating.NOTE :- Required minimum pull off strength is 1.5 N/mm2 (a) Priming coat :- Applying one coat of Synthetic Rubber Emulsion based cementitious coating system, using brush. Latex polymer to be added with OPC cement with water dilution as per data sheet.Consumption of misture :- 0.3 Kg/sqmSystem requirement Density - 1.02 Kg/LtrPH :- 6-8Main Water Proofing :- To be carried out after 2 hrs of applying primerProviding and applying Two coats of Acrylic Polymer modified cementitious Liquid water proofing compound System Structure :- Base Coat :- Two part Acrylic Polymer modified cementitious compoundConsumption base coat :- 1.5 Kg/sqmFibre Reinforcement Consumption :- 1 Sqm/SqmTop Coat :- Two part Acrylic Polymer modified cementitious compoundConsumption base coat :- 1.5 Kg/sqmLayer Thickness :- 1.5 mm avg thickness with Fibre mesh |
| 70 | System Requiremnets :-Mixed Density :- 2.0 Kg/Ltr at 27 degreeCompressive Strength :- >= 20N/mm2 in 28 days as per ASTM C109Bond Strength :- >= 2N/mm2 (Concrete Failure) as per ASTM C882SGS Certificate Free from acute lethal toxicity as per IS 6582CFTRI approved certificate (c) Ponding the sunken portion with water for 72 Hrs , after 3 hrs of final coating Protection Plaster :- 20 mm Thick Protection plaster in cement mortar (1:3) mixed with WP compound as per manufacturer’s instructions shall be provided on treated sunken portion for even & smooth finish. |
| 71 | Taking down, chipping and removing the loose, split, damaged cement concrete, cement mortar surfaces of RCC columns, beams, walls, chajjas etc and exposing the reinforcement, wire brushing and cleaning the exposed steel reinforced bar, apply rust remover over the cleaned re-barsurface wash the re-bar with clean water for removing all rusts fromthe old re-barsurfaces, fixing new reonforcement for strengthen the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, saturate the substrate with water applying one coat of polymer modified cement and quartz sand mortar in CM 1:3 mix, 40mm average thick in two coats, with and including polymer @10% by weight of cement, including erecting and dismantling steel scafoldingfor carrying out the work upto height of 12 metre (Appx) complete all as specified and as directed. |
| 72 | 15mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, as in repair complete all as specified and directed. |
| 73 | 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, as in repair complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 21 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender