Tender For Repair To Certain Miscellaneous B/R Items At Zone A At Mil Stn Raiwala Under Age(I) Raiwala
Tender Value
9 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
11 days left
EMD
18000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Certain Miscellaneous B/R Items At Zone A At Mil Stn Raiwala Under Age(I) Raiwala 1 Old Pvc Scrap 2 Old Iron Scrap 3 Old Brick Work 4 Old U/S Gi Tubing For 15 Mm Dia 5 Old U/S Gi Tubing For 20 Mm Dia 6 Old U/S Water Tank Of Any Size 7 Old U/S Sinks 8 Old U/S Cp Stop Cock, Bib Tab And Pillar Tab Of Any Size 9 Old U/S Towel Rail / Ring Of Any Size 10 Old U/S Shower Of Any Size 11 Old U/S 20 Mm Gate Valve 12 Old U/S 15 Mm Gate Valve 13 Old U/S Pvc Connections Of Any Size 14 Old U/S Looking Mirror Of Any Size 15 Old U/S Flushing Cistern 16 Old U/S Wash Basin Mixture 17 Old U/S Wall Mixer 18 Old Float Valve Of Any Size 19 Old U/S Cp Grating Of Any Size 20 Old U/S Ss Jet Spray 21 Old U/S Ptmt Urinal Spreader, Waste Coupling And Soap Dish 22 Old U/S Ldpe Pipe Of Any Size
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of lime concrete in floors and paving exe 15 cm thick above ground floor (sunken floor) including picking, sweeping cleaning with wire brush and washing down with water to remove dust, dirt to get surface free of laitance , scales, oil or any othet loose material and removing the demolished material outside the MOD land.Complete all as specified and directed |
| 2 | M/L for PCC 1:1.5:3 type A-0 (Using 12.5mm stone aggregate)as in concrete angle-fillets with a radiaus of 75mm shall be provided at junctions between roofs, floor and vertical faces of walls (parapet, pillar for water tank staging and sunken floor) around obstacles such as pipes, chimney stacks, etc. and other similar situation complete all as specified and directed. |
| 3 | Providing and application two coat of acrylic polymer modified cementitious flexible waterproof coating on horizontal and vertical surface for sunken floor as per manufacturer direction after base preparation of cleaning, brushing and removal of flaky materials. The coatings shall be applied at intervals and as per the manufacturer’s specifications and approved by Engineer in Charge .Note : Ponding test after water proofing coating willl be done for ponding for 48 Hrs . |
| 4 | M&L for 15 mm thick protection plaster CM 1:4 floor and wall with polymer modified repair mortar complete all as specified and directed. |
| 5 | M/L for providing 40 mm dia GI pipe (medium grade) spout projecting at least 300 mm beyond outer face of wall or as per direction of Engr-in-charge |
| 6 | M&L for cement concrete 1:7:12 type F2(using 40 mm graded stone aggregate) as in filling of sunken portion complete all as specified and directed.Complete all as specified and directed |
| 7 | M&L for 30mm thick PCC Type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in floor complete all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises from MoD all as specified and directed. |
| 9 | M&L for coloured ceramic tiles (Joint free 7 to 8mm thick (square/rectangular) area of each tile exceeding .11 sqm but not exceeding 0.18 sqm,in floors etc,set and jointed in neat cement slurry and pointed in white coloured cement to match coloured tiles over and including 17 mm thick screed bed in CM (1:4) complete as specified and directed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I) |
| 10 | M&L for Glazed coloured ceramic tiles (joint free) in vertical surface,size 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement tomatch coloured tiles over and including 12 mm thick rendering CM(1:4) complete as specified and directed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I) |
| 11 | M&L for Non skid ceramic tiles full body light shade 8-10 mm thick (square/rectangular) polished,area of each tiles exc .18 sqm but not exceeding 0.36 sqm,in vertical surfaces of dado/skirting etc,set and jointed in neat cement slurry and pointed in white or coloured cement to match slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM (1:4) complete as specified and directed.Note:- Shade of the tiles including Colour, design and pattern shall be approved by AGE (I) |
| 12 | Dismantaling RCC /PVC water tanks and S&F new rotational moulded polyethylene water storage tank 1000 liters capacity, double layer (ISI Marked) construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule complete all as specified and as directed. |
| 13 | Dismantaling RCC /PVC water tanks and S&F new rotational moulded polyethylene water storage tank 500 liters capacity, double layer (ISI Marked) construction (cylindrical vertical closed top), hoisted & fixed in position including S&F 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule complete all as specified and as directed. |
| 14 | Dismantling of cast iron or reinforced concrete drain pipes up to 110mm dia , jointed in cement mortar and taking out of trenches if required . |
| 15 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors. |
| 16 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors. |
| 17 | S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 18 | S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls. |
| 19 | S & F 75 mm bore PVC (SWR) bends of any radius |
| 20 | S & F 75 mm bore PVC (SWR) bends of any radius with access door |
| 21 | S & F 110 mm bore PVC (SWR) bends of any radius |
| 22 | S & F 110 mm bore PVC (SWR) bends of any radius with access door |
| 23 | S & F PVC (SWR) reducers of size 110 mm x75 mm |
| 24 | S & F 75 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 25 | S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal with access door. |
| 26 | S & F 75 mm bore PVC (SWR) Vent Cowl |
| 27 | S & F 75 mm bore PVC (SWR) Multi floor trap including jointing with solvent cement |
| 28 | S & F 110 mm bore PVC (SWR) P Trap |
| 29 | S & F 75 mm bore PVC (SWR) floor Trap, plain with grating inclding jointing with solvent cement . |
| 30 | S&F stack clamps out of 40mmx 3 mm flat iron including bolts and nuts and securing ends of stays to walls or roof with fastner for 100 mm pipe, complete all as specified and directed. |
| 31 | S&F stack clamps out of 40mmx 3 mm flat iron including bolts and nuts and securing ends of stays to walls or roof with fastner for 100 mm pipe, complete all as specified and directed. |
| 32 | Demolition of brick work built in cement mortar in any description and position complete all as specified and directed. |
| 33 | M&L Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 |
| 34 | M&L for Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, except bricks complete all as specified and directed. |
| 35 | M&L Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 |
| 36 | Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 20 mm dia . |
| 37 | Taking up or down steel water tubing and connections including cleaning for refixing or removing to store 15 mm dia . |
| 38 | M&L for Mild steel galvanized steel tubing of 20 mm bore (ISI Marked) with screwed socket joints, medium grade, together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed |
| 39 | Refixing old steel tubing of 20 mm bore and connections in new or old position (walls, ceilings, floors etc.) together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed |
| 40 | M&L for cutting chases on brick or concrete surface for concealed water tubing or / similar work of girth n.exc 10cm including making good of disturbed surfaces with PCC 1:2:4 type B0 using 12.5 mm graded aggregate complete all as specified and directed. |
| 41 | M&L for Mild steel galvanized steel tubing of 15 mm bore (ISI Marked) with screwed socket joints as in concealed pipe work , medium grade, together with all fittings heavy duty (ISI Marked ) (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.) and fixed complete to walls and ceiling with clips, wall hooks, wooden plugs or laid in floors Complete all as specified and directed |
| 42 | S & F 20 mm dia in repair Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs. |
| 43 | S & F 15 mm dia in repair Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs. |
| 44 | S & F , in repair, Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long. |
| 45 | Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed. |
| 46 | S & F in repair Vitreous china urinal, bowl type flat back of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, |
| 47 | S&F in repair urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete all as specified and directed |
| 48 | Supply & fix in repair Soap dish,any type,fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 49 | S&F in repair of bore dia 32 mm waste coupling of PTMT (half or full threaded) all as specified and directed. |
| 50 | S & F in repairs Sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 914 mm x 460 x 203 and bowl size 405mm x 354 mm x 203mm. |
| 51 | S & F in repairs 15 mm bore Stop valves (angular stop cock), cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle or concealed screwed both ends for iron pipe or for unions. |
| 52 | S & F in repairs Stop angle valves, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type) of size 15mm bore, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe complete. |
| 53 | S & F in repairs 15 mm bore chromium plated bib taps long body, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 54 | S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe. |
| 55 | S&F in repairs towel Rail 600 mm long fixedwith and including Chromimum plated brass screws and wooden plastic cleats (Min weight 190 gms). |
| 56 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union |
| 57 | S&F in repair for PVC Connections 15mm size with PTMT nuts of length 600 mm |
| 58 | S&F in repair Wash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fitting |
| 59 | S & F in repairs for Grating ,round 127 mm dia chromoum plated |
| 60 | S&F in repair to 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 61 | S&F in repairs PVC valveless, syphonic action type flushing cistern (Dual action ISI Marked), low level , white, with inlet ball valve, float and handle including brackets and flush pipe suitable for IWC of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity of approved make .Complete all as specified and directed . |
| 62 | S&F in repairs Vitreous china Squatting pan , 'Orissa pattern, size 580x440 mm white, with integral foot rest excluding flushing cistern and flush pipe including connection to trap, to flushing pipe, anti-syphonage pipe, etc complete including making good to floor . |
| 63 | S&F in repairs Vitreous China wash down water closet pan (Pedestal pattern) white complete incl seat and cover, flush pipe incl all joints complete |
| 64 | M & L in repair S S Jet spray with 1.5 mtr braided tube complete all as specified and directed |
| 65 | S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair. |
| 66 | Supply & fix in repair wall mixer with over head shower chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes complete all as specified and directed. |
| 67 | Supply & fix in repair to chromium plated towel ring complete all as specified . |
| 68 | S&F in repair 32 mm dia low density polyethylene pipe (LDPE) of pressure rating @ 6Kg f per Cm Cm Square fixed to walls, ceilings or in floors etc. |
| 69 | M&L for preparation of old decorated surface of internal wall by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and applying two coats of acrylic distemper over one coat of wall puttyusing roller all as specified and prescribed by manufacturer of paint Ist Quality and all as directed at site by Engr-in-Charge .Note:- (i) The old surface must be prepared with wall care putty in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building.(v). The colour / shade will be all as approved by GE / AGE (I) |
| 70 | Taking down cement plaster on brick , concrete or stone wall surfaces including glazed tiles wherever exists including raking out joints, hacking for key and scrubbing down with water and removing unseviceable materials out side MoD land complete all as specified and as directed. |
| 71 | M&L for 15mm thick plastering on fair faces of brick wall in CM (1:6) surface finished even and fair complete all as specified and directed. |
| 72 | M&L for preparation of newly plastered surface of interior wall by application of wall care putty to remove the dent and to make the surface even and smooth by grinding or rubbing with sand paper and applying two coats of acrylic distemper over a coat of primer using roller all as specified and prescribed by manufacturer of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge.Note:- (i) The old surface must be prepared with wall care putty in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of distemper. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building.(v). The colour / shade will be all as approved by GE / AGE (I) |
| 73 | M&L for 15mm thick plastering on fair faces of brick wall in two layers, Ist layer 10mm thick CM (1:6), and IInd layer 5mm thick CM (1:4), surface finished complete all as specified and directed. |
| 74 | M&L for preparation of old decorated surface of exterior wall by complete removal of existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with Bleaching powder solution for treatment of fungal growth and applying two coats of exterior anti fungal acrylic emulsion paint of required shade (wallmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge.Note(i) The old/ New surface must be prepared in a manner so that there should not be any impression of dent and it should be made even all as per manufacture instruction before application of distemper. The cost of materials, labour and T&P required for preparation of surface are demand to be included in the rates quoted. (ii) The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii) All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv) after carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building.(v) Before commencing the work, contractor will got the written approval from GE/ AGE (I) for the make and colour / shade (tint).(vi) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor. |
| 75 | M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint (walmista of Berger paint or equitant in Asian paint, Nerolac etc having three years of performance warranty) over a coat of exterior water based primer of same make all as specified and prescribed by manufacture of paint/ distemper by using roller/ spray machine complete all as specied and directed at site by Engineer-in-Charge.(ii). The work must be got executed through authorised applicator of manufacture after concluding an MoU with manufacture for company back guarantee by the contractor. The authorised applicator of manufacturer shall be got approved from GE/ AGE (I) before commencement of work. (iii). All the material to be incorporated in the work shall be brought by contractor to MES store yard which will be subsequently issued by deportment for incorporation in the work to ensure the quantity to be consumed all as per recommendation of manufacture.(iv). After carrying out preparation of surface the same shall be got approved from GE /AGE (I) before application of distemper for each building.(v). The colour / shade will be all as approved by GE / AGE (I) |
| 76 | M&L preparation of old painted wall surface including cleaning,scrapping/removal of loose and defective existing paint,surface preparation and applying one coat of approved quality oil bound distemper to walls including cornics,pillars etccomplete all as specified and directed. |
| 77 | M/L preparation of old surface of ceiling plastered including cornices and pillasters etc and applying one coat of white wash on ceiling all as specified and as directed by Engr-in-Charge. |
| 78 | M&L preparation of old painted wall surface including cleaning,scrapping/removal of loose and defective existing paint,surface preparation and applying one coat of approved quality cement based paint to walls complete all as specified and directed. |
| 79 | M&L preparation of old painted wooden surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed . |
| 80 | M&L preparation of old painted steel surfaces of any descripton over 10cm width or girth and applying one coat of synthetic enamel paint First quality all as specified and directed . |
| 81 | M/L for writing letters/Bldg Nos or figures(Block, Roman or Indian) on wall 10cm height using synthetic enamel paint white or circular /black painted, black back ground all as specified and directred by Engg in charge |
| 82 | S&F in repair 20 mm dia ball valves, high pressure of epoxy coated Aluminium rod and high density plastic ball complete including check nut and suitable nipple, screwed for iron pipes or brasas ferrule and fixed.Make : ISI mark |
| 83 | M&L preparation Old painted concrete surface of any description surfaces exc. 10 cm width or girth and applying two coat of synthetic enamelled paint of any tint over a coat of primer incl. all preparation complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender