Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #58185653

Tender For Special Repairs To Bldg No P-33 Otm Accn Of 39 (I) R&O Flt Under Ge (East) Bareilly

Issued by Statutory Bodies & Commissions/Committees · bareilly, Uttar Pradesh
Tender Value
60.29 Lakhs
Estimated cost
Bid Submission
27 Nov 2026
5 days left
EMD
1.15 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bareilly → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repairs To Bldg No P-33 Otm Accn Of 39 (I) R&O Flt Under Ge (East) Bareilly

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 28-Oct-2026 Location of work Terms and Conditions 20-Nov-2026
2 20-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 27-Nov-2026

BOQ

Name of Work:- SPL REPAIRS TO BLDG NO P-33 OTM ACCN OF 39 (I) R&O FLT UNDER GE (EAST) BAREILLY
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPL REPAIRS TO BLDG NO P-33 OTM ACCN OF 39 (I) R&O FLT UNDER GE (EAST) BAREILLY Contract No : CWE / BLY / GE(E) /131 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.
3M&L 25 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.
4M&L 40 mm thick PCC 1:2:4 type B-1, using 20 mm graded stone aggregate as in floors, surfaces finished fair and even complete all as specified and directed.
5M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
6M&L backing coat of cement mortar, 10 mm thick, in cement mortar 1:4, for skirting/ dado complete all as specified and directed.
7M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
8M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.
9M&L for 7 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile area (300x450/300x600 mm size approved by GE), as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed.
10Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.
11M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror finish complete all as specified and as directed.
12M&L screed bed or bedding layer of mortar, 20 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed.
13M&L Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to get mirror polish complete including rendering, 10mm thick CM 1:4 on vertical surface complete all as specified and directed.
14M&L 20mm thick granite of black colour (tablee rubbed and polished) as in windows cill , in steps, jambs, pillars, cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed
15Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) complete all as specified and directed.
16Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) complete all as specified.
17Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed .
18S&F 125x60mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified , including filling of PCC 1:3:6. complete.complete all as specified and directed.
19S&F 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .
20S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.(Note :- S & F wire mess shall be measured and paid for separately)
21S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.
22S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and directed.
23S&F, steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded , complete all as specified and directed.
24S&F, steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded , complete all as specified and directed.
25S&F mild steel window grills framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
26S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.(Note :- Glass shall be measured and paid for separately).
27M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
28Hacking out old, broken glass (any thickness,) size quality or description) from metal frames incl.punching or drilling out old glazing pins/spring clips and fixing new ones incl M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane (upto 3 story building (MAP area) complete all specified and as directed.
29S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed .
30S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in m s window / wooden shutter complete all as specified and directed
31S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
32S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed.
33S&F 100 mm size butt hinges medium weight stailess steel colled rolled complete all as specified and directed .
34S&F in repair 300mm, ordinary rat tail rod patttern springs includding roller and roller platewith fixed to wooden/pressed steel frame chowkats with flat iron 40x3mm size 75 cm long with necessary bolts, etc. complete all as specified and directed.
35S&F 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
36M&L preparation newly untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed .
37M&L for preparation of newely untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed .
38Demolition cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed .
39M& L 100 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed.
40M&L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed .
41M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors,path etc with grey pigment cement as approved by GE complete all as specified and directed.
42Taking up or down15 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
43Taking up or down20 mm steel tubing and connections including cleaning for refixing or removal complete all as specified and directed.
44Dismantling water tanks 500 ltr & n exc 1000 ltr and removing to store of all retrieved material complete all as specified and directed.
45S&F 1000 litres, rotational moulded polyethylene in double layer water storage tank (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed.
46S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
47S&F 15 mm dia steel water tubing galvanized medium grade concealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
48S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wall with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed.
49S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including 15mm dia pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets . complete all as specified and directed.
50S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap ,but including waste pipe fixing on counter with stainless steel brackets complete all as specified and directed by Engr-In -charge.
51S & F in repair fancy type 125mm size square brass CP shower rose, complete all as specified and directed.
52S&F in repairs 15 mm dia pillar tap fancy type chromium plated complete all as specified as directed.
53S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
54S&F fancy type chromium plated brass two way bib cock suitable for 15mm bore pipe complete all as specified and directed. 2 Way Bib Cock with Wall Flange.complete all as specified and directed.
55S&F in repair fancy type coloured brass chromium plated toilet paper holder, complete all as specified.
56S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
57S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified.
58S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified.
59S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed
60S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed complete all as spd as directed
61S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.
62S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with \\"P\\"or \\"S\\" trap size 100 mm bore front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified.
63S&F in repair vitreous China coloured European type WC with100mm bore \\"P\\" or \\"S\\" trap white, including connection to drain or out going pipe and flush pipe anti symphonize pipes etc complete all as specified and directed.
64S&F in repair Vitreous China Urinal, Half stall type,white .Urinal, bowl type or half stall pattern, basin, including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe.(Minimum weight 60gms). with waste coupling of 32mm bore dia of discharge pipe (min weight of 32mm-45gms ) and 32mm bore of High density polyethylene (HDPE) pipes of pressure rating 6 kgf/sq. cm. complete all as specified and directed.
65S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed
66S & F Brass CP health faucet with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hook screwecd for iron pipe fancy type long body all as specified and directed.
67S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
68S&F in repair PVC (SWR) 75 mm bore pipes double socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed.
69S&F in repair PVC (SWR) 110mm bore pipes double socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
70S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
71S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
72S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed.
73S&F in repair designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality glass, mounted on 6mm thick fixed to wall with wooden plugs with chromium plated brass screws and cup washers, complete all as specified
74M&L 1:5:10 type E-2 ( 40mm nominal size of brick bats) cement concrete for filling and mass concrete with broken brick agg in (sunken portion). complete all as specified and directed.
75S&F 32mm dia GI pipe, medium grade as in spout pipe in sunken floor complete all as specified and directed.
76M&L for WPT in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane, minimum 4mm thick and weighing above 4.0 Kg/Sqm with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer @ of 0.40 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at the sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an as directed Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Supply only water proofing liquid shall be measured and paid seperately . complete all as specified and directed.
77Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
78M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished without using extra cement complete all as specified and directed.
79M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.
80M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed .
81M& L applying two coat of white wash on old decorated ceiling surfaces including preperation of surfaces, complete all as specified.
82M&L for prepration of old plastered surface of wall , complete removal of existing treatment on wall by scrapping with mechanical sander ( having mechanical vaccume mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying two coats of dust resistant, anti algal weather proof exterior/ internal emulsion paints( appex) by electric sprayer, over a coat of 1mm thickness putty, complete all as specified and directed.
83M&L for complete removal of existing treatment on walls by scrapping with mechanical sander ( having mechanical vaccum mechanism) with sanding pas of approppirate grit to make surface clean, free from dust, loose paint etc by skilled labour and applying of two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coat of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer.
84M&L for applying of two coat OBD on newly plastered surface of wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over two coat of wall care putty of 1 mm thickness prepared and sanded with electrically operated sanding machine complete all as specified and directed. Application to be done through authorised dealer.
85M&L for prepration of newely plastered surface of wall , and applying two coats of dust resistant, anti algal weather proof exterior/ internal emulsion paints( appex) by electric sprayer, over a coat of 1mm thickness putty, complete all as specified and directed.
86M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
87M&L for applying cement slurry over existing roof surface @ 3 Kg/Sqm incl mix with water proofing liquid @ 0.15 ltr per 50 kg cement bags as per manufactures instructions complete all as specified and directed.
88M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement complete all as specified and directed by Engineer-in-Charge.(Note : Water proofing liquid shall be measured and paid separately)
89Supply and fix APP polymeric water proofing membrane, minimum 3 mm thick and weight 4 kg per Sqm with mineral, minimum 3.5 kg per Sqm without mineral weight with rich bitumen and select polymers blended together to obtain excellent heat resistance & cold resistant as approved by GE, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compatible bitumen primer @ 0.50 Kg/Sqm torching overlaps with a propane or a butane gas torch, with a overlap of 100 mm and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer’s instructions complete incl removal of existing treatment all as specified and as directed.Note: (i) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate with using LW(+) , of radius 75mm shall be provided at the junction of roof and parapet wall/ mumty/ chimney/ other vertical surfaces and thereafter surface painted with hot paving bitumen of Grade 85/25 confirming to IS-73, [email protected] Kg/Sqm over a coat of bituminous primer confirming to IS-3384 applied @ 0.30 Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by a membrane flushing. (iii) The waterproofing treatment shall be got carried out by the manufacturer or their authorized applicators. (iv) In case of stone masonry parapet wall etc a groove of size 25mmx25mm(minimuim) shall be made in coved fillet at the junction of roof and parapet wall/ mumty Chimny/ other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v) Exposed surfaces of APP membrane shall be applied with two coat of bituminous aluminium paint @ 150 ml/Sqm. (vi) Above aspects are deemed to be included in quoted rate.
90Supply Integral water proofing Liquid complete all as specified and directed
91S&F for 0.71mm thick Aluminium plain sheeting Alloy 31000 H4, STUCCO Embossed finish with fixed with coach screw and Aluminium washer in roof and wall etc. with end laps stitched with 25x6mm G.I. bolts at 20cm apart incl dismantled also complete all as specified and directed
92M&L for one coat of synthetic enamel paint (any tint/shade) including preparation of old decorated steel surfaces of any description over 10 Cm width or girth not otherwise described complete all as specified and directed.
93M&L for preparation of old painted wooden surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (any tint/ shade) complete all as specified and directed
94S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed
95M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.
96M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors. complete all as specified and directed.
97Taking down carefully existing Aluminum/Copper point wiring (light/ Fan / Ind Socket/Ind Same socket/Power Point) complete fittings etc. making good to disturbed surface of wall/Floor etc to match the existing surface/ finishes all as directed.
98Taking down MCB DBS including MCBS etc of any size and making good disturbed surfaces to match with the existing surfaces of wall, floors etc complete all as specified and directed.
99Taking down ceiling/ exhaust fan/ geyser and disconnecting, deposit to E/M store of the sub division for keeping in safe custory for BER board complete all as specified and directed.
100Taking dowm submain wiring/service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls, floors complete all as specified and directed.
101M&L for concealed point wiring using approved colour coding as per IS (Red , black and Green for single phase circuits),with multistranded copper conductor 1.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML No. including PVC conduit with mild steel/ pressed steel sunken box (with earth dolly) with modular white cover plate with frame for mounting modular switches, socket and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed by Engr-in-charge for the following :-(a) One light/fan point controlled by one switch 5/6 Amp one way
102(b) All as per item no.100 but socket outlet 3 pin 5/6 amps same board
103(c) All as per item No. 100 but for one socket outlet of 5/6 Amps on independent board .
104M&L for concealed point wiring using approved colour coding as per IS (Red , black and Green for single phase circuits),with multistranded copper conductor 2.5 sq mm nominal cross-sectional area , single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI marked with valid CML No. including conealed PVC conduit with mild steel/pressed steel sunken box (with earth dolly) with modular white cover plate with frame for mounting modular switches and socket etc, inciuding PVC insulated multistranded copper conductor 2.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth duly completed all as specified and directed.
105S&F in replacement ceiling rose 2/3 terminals of PVC/ polycorbonate, isolated body complete all as specified and as directed.
106S&F in replacement modular switches 1 way, 6 A, 1 module complete all as specified and as directed.
107S&F in replacement modular switches 1 way, 16 A, 1 module complete all as specified and as directed.
108S&F in replacement modular sockets 6A, 2/3 pin combined 2 module complete all as specified and as directed.
109S&F in replacement modular sockets 6A/ 16A, 2/3 pin combined 2 module complete all as specified and as directed.
110S&F in replacement MCB SPN 40 to 63 Amp 240 volt, 10kA complete all as specified and directed.
111S&F 240V, 10 KA 'B' curve miniaturecircuit breaker (MCB) of single poles and currentcarrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.
112S&F in replacement MCCB triple pole 125 Amps 415 Volts curve 16 kA complete all as specified and directed.
113M&L for sub main wiring concealed type with two single core cable PVC insulated cable with 6.0 Sqmm (Nominal area) multi stranded copper conductor FRLS cable 1100 volts gde incl earth continuity conductor using PVC insulated cable of stranded copper conductor of size 6.0 Sqmm connected to common earth dolly and drawing into rigid PVC conduits of 25 mm dia medium grade size incl. making good the disturbed surfaces complete.(Note : PVC conduit and its accessories including 2 runs of cable & 1 run of earth continuity conductor cable unsheathed shall be measured and paid as single unit). complete all as specified and directed.
114S&F in replacement sheet metal enclosure DB's 415 volts, IP-42 vertical suitable for mounting MCCB's TPN, 4 way with 200 Amps rated copper bus bar complete all as specified and directed
115S&F in replacement double door MCB distribution boards sheet steel, powder coated DBs suitable for MCBs fitted with bus bar, neutral link earth bar and din rail single phase and neutral confirms to IS : 13032-1991 of 12 ways complete all as specified and directed.
116S&F LED light fitting 1x20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of sutaible size from ceiling rose complete all as specified and directed.
117S&F B-22 base modular holder for fixing LED bulb complete all as specified and directed.
118S&F B-22 base LED bulb 9 watt 50 Hz 240 volts complete all as specified and directed.
119S&F in replacement building security light LED type 25 W 240V connceting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including GI bracket of size 20mm dia with fastner complete all as specified and directed.
120S&F 2' x 2' LED recess/ surface mounted fitting 36 watt, 230 V, with integrated electronic driver high transcluent frosted diffuser, connector block etc complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
121Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
122Taking down and refixing ceiling fan after complete rewinding, cleaning, painting and mentioned previous MES No. with connected item if rquired such as conopy, down rod shaft etc complete all as specified and directed.
123Taking down and refixing exhaust fan after complete rewinding, cleaning, painting and mentioned previous MES No. with connected item if rquired such as conopy, down rod shaft etc complete all as specified and directed.
124Taking down and refixing geyser of capacity 25 ltr after cleaning, painting and mentioned previous MES No. including replacement of element, assembely, thermostat, safety pressure valve, PVC pipe etc. complete all as specified and directed.
125S&F in replacement fan regulator resistance step type single phase 230 volt 2 module complete all as specified and directed .
126M&L for earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.
127Suppy, laying XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt grade cross sectional area 35 Sqmm 3.5 core complete all as specified and directed.
128M&L for laying GI tubing light grade 40 mm dia with all fittings for cable protection complete all as specified and directed.
129Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.
130Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.
131Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.
132M&L for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I complete all as specified and directed.Note :- Only compacted thickness of sand will be measured and paid separately.
133Supply, laying brunt sub class 'B' old size brick complete all as specified and directed. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58185653
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 60.29 Lakhs
LAST DATE 27-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repairs To Bldg No P-33 Otm Accn Of 39 (I) R&O Flt Under Ge (East) Bareilly
Basic Detail
Tender No 8200/B/974/E8
Bidding Type Tender
Location
City bareilly
State Uttar Pradesh
Key Dates
Publish Date 20 Nov 2026
Submission Date 27 Nov 2026
Open Date 04 Dec 2026
Finance
Tender Value 60.29 Lakhs
Tender Fee 1000
EMD 1.15 Lakhs
Exemption Available
Document List
857cd1dc-82c9-437c-91e9-789a1f25a0d4.html
BOQ_892001.xls
PS_131.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 20, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 20, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Nov 27, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 27, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Dec 04, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 12 days

Tender Documents

Download All (ZIP) ↓
html

857cd1dc-82c9-437c-91e9-789a1f25a0d4.html

xls

BOQ_892001.xls

pdf

PS_131.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender