Tender For Addition/Alteration /Improvement To Bldg No P-227 And Addn /Altn To Bldg No. P-175 At Af Stn Utarlai
Tender Value
47.45 Lakhs
Estimated cost
Bid Submission
14 Nov 2026
2 days left
EMD
94900
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Barmer → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration /Improvement To Bldg No P-227 And Addn /Altn To Bldg No. P-175 At Af Stn Utarlai
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or and getting out soft/loose soil complete all as specified. |
| 2 | M&L Cement concrete in foundations, filling and mass concrete D2- 1:4:8 using 40mm graded aggregates complete. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. |
| 4 | Removal of excavated soil to a distance n exc 50m depositing where distance at a level n.exc 1.5m heights from starting point. |
| 5 | M & L for hardcore of broken stone or boulders gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified |
| 6 | M & L for 75mm thick (1:3:6) using 20mm graded stone aggregate as in plinth protection finished even and smoth without using extra cement complete. |
| 7 | M&L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded aggregate as in sub base of floor all as specified. |
| 8 | M&L for Cutting openings, through brick walls built in cement mortar for door, window and other openings or enlarging existing openings.converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks,removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and as directed. |
| 9 | M& L for Making good under cills or over arches, lintels and bressummers including allpinning when necessary cement mortar complete all as specified and as directed. |
| 10 | M&L Pre-cast cement concrete block masonry with solid blocks 1:3:6 , exc. 10 cm in width and setting in mortar CM 1:6, complete all as specified and directed. |
| 11 | M&L for rendering 10mm thick in CM 1:4 on brick/concrete surfaces finished even and smooth without using extra cement all as directed. |
| 12 | M&L for rendering 15mm thick in CM 1:6 on brick/concrete surfaces finished even and smooth using water proofing compond and finish the surface even and smooth without using extra cement complete all as specified and directed.Note:-WPC will be measured and paid separately |
| 13 | Supply only intergral water proofing compound. |
| 14 | M&L for rendering 5mm thick in CM 1:3 on concrete ceiling surfaces finished even and smooth without using extra cement all as directed. |
| 15 | M & L for 25mm thick Cement concrete type B-1,1:2:4 (20mm graded as in sub base under floor tiling complete. |
| 16 | M&L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter |
| 17 | M&L for RCC M-25 (Design Mix) as in foundations,including, plinth beams,bases for columns,etc complete all as specified and as directete |
| 18 | M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions etc all as specified & directed. |
| 19 | M&L for RCC M-25 (Design Mix) as in Columns, pillars, piers, posts and struts etc complete all as specified and as directed. |
| 20 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and as directed by the Engineer-in-Charge |
| 21 | M & L for RCC M-25 (Design Mix) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)etc all as specified |
| 23 | M&L for RCC M-25 (Design Mix) Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like etc complete all as specified and as directed. |
| 24 | Providing & Laying TMT Bar Fe-500 (10mm dia and above) reinforcement for RCC work including bending binding and placing in postion with anneald wires … etc . completed as directed by engineer in charge for all levels. |
| 25 | Providing & Laying TMT Bar Fe-500 reinforcement for RCC (6-8mm as in stirrups) work including bending binding and placing in postion with anneald wires … etc . completed as directed by engineer in charge for all levels. |
| 26 | M&L Preparation of New plastered Surface of wall and applying two coats of Exterior Emulsion Paint over one Coat Primer complete all as specified. |
| 27 | M&L for 20mm thick granite tile (of any type) work (table rubbed and polished) in floor ,steps, jambs, pillars,vertical surface, window- cills, cooking platforms and like bedded over and including 20mm thick screed bed in CM (1:4) and pointing in white cement (1:2) using marble dust with admisture of pigment to match with shade of granite and round to the edge of stone slab on platform complete all as specified and directed. |
| 28 | Removing of existing unserviceable water proofing treatment taking down cement plaster etc, of any description and cleaning of top surface of cement concrete flushing out junction of parapet walls & washing down with water to remove all dirt etc including preparation of surfaces to receive new treatment and removing the rubbish off premises. |
| 29 | M&L for water proofing treatment of roof consisting as under:-(a) Applying a coat of bituminous primer conforming to IS-3384:1986 @ 0.30 Ltr/ Sqm including preparation of roof surfaces.(b) A lsyer of 3mm thick APP polymer mambrane of weight not less than3.67Kg/ Sqm, reinforced with polyster non wove fabric (wt. not less than 160 Gms/Sqm) duly sealed at over laps(100mm side lap and 150mm end over lap) and joint with LPG flame by torch aplication) all as per manufacturer's instruction complete all as specified and directed.(c) one coat of aluminium paint over a coat of primer apply on top surface of APP. |
| 30 | M&L10mm thick screed bed in CM 1:4 mixed with WPT 3% by weight of cement all as specified and as directyed by Engr-in-Charge.(WPC shall be measured and paid separately) |
| 31 | S&F fixed type aluminium anodised ventilators with provision of bottom panel in fixed glazing of 3mm thick glass and top shutter shall be provided with 2 nos aluminum 75mm long hinge at upper side with 3mm thick sheet glass including 4 mm dia stainless steel 2 Nos stay, tower bolt 100mm long 1 Nos, anodised aluminium grill with aluminium chanel including 0.36mm dia stainless steel wire cloth and average aperture 1.4mm and all necessary fittings arrangement complete using aluminium section 65x40x1.5mm thick etc in frame and shutter frame aluminium section size 37x18x1.2mm complete all as specified. |
| 32 | Taking up or down steel tubing pipe and connections 15mm bore complete all as specified |
| 33 | Taking up or down steel tubing pipe and connections 20mm bore complete all as specified |
| 34 | S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors |
| 35 | S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors |
| 36 | S&F 15mm bore bib tap cast copper alloy chromium plated long body fancy type fixed to iron pipe or CP nipple/sockets complete all as specified and as directed. |
| 37 | S&F in repair 15mm bore bib tap cast copper alloy chromium plated long body fancy type fixed to iron pipe or CP nipple/sockets complete all as specified and as directed. |
| 38 | S&F gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 39 | S&F cast iron floor trap 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified. |
| 40 | S&F cast iron Nahani trap 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified. |
| 41 | S & F100mm dia of outlet for WC's without grating jointed in cement CM 1:2 complete all as specified and directed. |
| 42 | S&F 75 mm bore cast iron bends with oval access door (any radius),TEE/Socket/ branch pieces/cowl diminishing pieces or tapers (larger bore measured). |
| 43 | S&F in 100 mm bore cast iron bends/Tee/sockets/ branch pieces/Cowl (any radius), diminishing pieces or tapers (larger bore measured) jointed in cement CM 1:2 complete . |
| 44 | S&F 100 mm CI connection socket/ bend/ Branch piece to fit out let of WC or other places as required CI bend/Tee with oval access door jointed in cement CM 1:2 complete |
| 45 | Dismantling of CI drain pipes 75/100mm internal dia, jointed in cement mortar and taking out of trenches, if required complete all as specified and directed . |
| 46 | S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed. |
| 47 | S&F cast iron soil, waste and vent pipes of 100 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to wall as specified & as directed. |
| 48 | S&F 75mm bore cast iron cowl complete all as specified. |
| 49 | S&F 15mm dia wall diverter high flow full brass assembly set with tap complete incl taking down of existing mixture complete all as specified and directed. |
| 50 | S&F 15mm dia wall diverter high flow full brass assembly set with tap complete all as specified and directed. |
| 51 | S&F 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions. |
| 52 | S&F in repair 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions. |
| 53 | S&F CP Grating dome square/circular 125 mm size with or without hole complete all as specified and as directed. |
| 54 | S&F in repair CP Grating dome square/circular 125 mm size with or without hole complete all as specified and as directed. |
| 55 | S&F PVC connection 15mm size with PTMT nuts of length 60cm long and fixed complete. |
| 56 | S&F in repair PVC connection 15mm size with PTMT nuts of length 60cm long and fixed complete. |
| 57 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises all as directed |
| 58 | M&L for Glazed ceramic coloured tiles in vertical surfaces /floor 600x600x10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match. |
| 59 | Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 1 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed |
| 60 | M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6. |
| 61 | M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive backing coat of tiles etc on vertical surfaces of walls all as specified and directed. |
| 62 | S&F 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed. |
| 63 | S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed. |
| 64 | S & F in repair for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed. |
| 65 | M & L for oval shape WHB (590 x 420 x 195) viterious China white incl fixing, waste coupling & PVC waste pipe of 32 mm dia all as directed. |
| 66 | S & F in repair CP swivel shower 300 x 300mm with shower arm 15mm dia and 195 mm long with bent of 45 degree with flange.Complete all as specified and directed. |
| 67 | S & F CP swivel shower 300 x 300mm with shower arm 15mm dia and 195 mm long with bent of 45 degree with flange.Complete all as specified and directed. |
| 68 | S&F in CP towel rack with towel hanging arrangements rail 600mm long fixed with screws and wooden/plastic cleats complete. All as directed by Engr-in-charge. |
| 69 | Supply and fixed in repairs one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with \\"P\\" or \\"S\\" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge . |
| 70 | Supply and fixed one piece viterous china floor/wall mounted superior quality , Ivory / white colour wash down water closet (Pedestal pattern), with \\"P\\" or \\"S\\" CI trap with inbuilt low level Eco twin button flushing cistern and seat cover etc. complete in all respect as specified and directed by Engineer-in-Charge . |
| 71 | S & F in repair 15mm bore Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed. |
| 72 | S & F 15 mm bore Chromium plated quarter turn central hole basin mixer with aerator inclduing flange , necessary fixing for 15mm bore size pipe complete all as specified and directed. |
| 73 | S&F in modular kitchen for ,1 plain innotech ,2 gallery innotec , 1 cutlery basket,1 GTBT ,2 Wicker Basket(Vegetable Basket), 1 Thali holder,1 kitchen dustbin holder and detergent rack,kitchen sink and all comprising of tandem type including G profile ,handle less structure,pvc skirting,and legs will beinstalled at lower cabinate complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge. |
| 74 | S&F 18/19mm HDMR board with high gloss laminates, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cupboards,kitchen cabinates, alimirah shutters or other places complete all as specified and directed. (Sample like colour shall be as approved by GE) |
| 75 | S&F 3way 3D hydraulic auto adjustable (Soft closed) concealed cabinets hinges stainless steel grade 202 with chrome nickle finishes each size 116x60mm mm for modular kitchen drawer complete all as specified and directed. Note : Sample shall be aprroved by GE/Engineer-in-charge. |
| 76 | S&F straight 5.50mm thick sheet glass corner shelf 300mm x 300mm size in quarter circle shape or rounded at one side with Cromium plated railing , mounted on decorative chromium plated bracket assembly set complete all as specified and directed. Note : sample of glass shelf shall be provided/ decided by Engineer-In-Charge. |
| 77 | S&F straight 5.50mm thick sheet glass shelf 600 mm long and 120mm wide with Cromium plated railing , mounted on decorative chromium plated bracket, assembly set complete all as specified and directed. |
| 78 | S&F diamond cut looking mirror with fancy metal frame of 10 mm thick complete all as specified and directed. |
| 79 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/false ceiling /slabs/wall panelling blankets, any thickness, including cover fillets and framing complete |
| 80 | M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre inluding Hangers of G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified & directed. |
| 81 | S & F Seamless calcium silicate 12mm ceiling madeout of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish complete all as specified & directed. |
| 82 | M & L for applying plaster of paris putty of 2 mm thickness over and including complete removal of existing treatment on old plastered surfaces of walls and applying two coats of Distempering with 1st quality acrylic distemper plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 83 | Taking down windows / ventilators / doors frames etc n.exc 1.5 sqm each with shutter (without taking off shutters from the frames). |
| 84 | S&F three track aluminum powder coated sliding window with three sliding shutter , the size of outer frame three track 90 x 30x 1.50mm ( using two track for glazed window shutter and one track for wire gauged ) , the section shutter size 37x 18x 1.2mm)and glazing with 5 mm thick Transparency / tinted glass of poly carbone including all-around suitable rubber gasket and stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminum flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number locking arrangement & 2 numbers’s sliding rollers of nylon with including anodised aluminium grill and all necessary fittings complete all as specified and directed. |
| 85 | Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. |
| 86 | Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of acryclic emulsion paint of required shade and colour complete, as per manufacturer's specification. |
| 87 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives including door frame complete all as specifiied and directed. |
| 88 | M & L for toughened etched glass door with fixed frame floor mounted with 2 Nos SS handle min 450 mm size decorative type inluding all fixing arrangements as per manufacturer instruction approved by GE complete all as specified and directed. |
| 89 | M&L for 16 TO 18 mm thick dholpur/jodhpur pattern decorative type/texture finish stone cladding with machine cut edges in any pattern as directed, uniform color of each stone any size incl making V groove or fixed with spacer or as directed, fixing of stone cladding including hole with hold fastener (if required) over 10 mm thick backing coat in cement mortar 1:4, with polishing, rubbing on stone surface or texture finish stone surface or as directed including silicon filling in V groove , set and jointed in neat cement slurry and pointed white or colored cement to match as directed including dismantling of glass mosaic tiles/mural/tiles of any description, Complete all as specified and directed.Note:- Pattern/designe of stone cladding work approved by Engr-in-charge/GE . |
| 90 | M&L for 25mm thick PCC 1:2:4 type B-0(using 12.5mm graded aggr) as in level course finished even and rough with out using extra cemet.complete all as specified and directed. |
| 91 | S&F for vitrified tiles 10 mm thick ( square/rectangular) in any shade are of each tile area not exceeding 0.36 sqm. In floors, parking, hard standing and similar work etc over screed bed or bedding layer 15mm thick in CM(1:4), set and jointed in neat cement slurry and pointed white or coloured cement to match incl dismantling old tiles Complete all as specified and directed. |
| 92 | Demolition of cement concrete of any description & in any position not otherwise specifically provided for complete all as specified and directed. |
| 93 | M&L for Chipping of slab/columns/beams/chajjas/parapet/roof projection/ balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying Fosroc Reebaklens RR rust remover or equivalent in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Fosroc Nitozinc primer or equivalent to reinforcement surface as per manufacturers instructions and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on surface of slab/columns/ beams/chajjas/ parapet /roof projection/balcony/staircase with Fosroc Renderoc SP40 or equivalent in Dr Fixit/STP/Asian paints / Sika /Bostik/ CICO/Choksey chemicals/ Thermax ltd/Hindcon chemicals applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Fosroc Nitobond SBR or equivalent in Dr Fixit/STP/Bostik/Sika/Choksey chemicals/Thermax ltd/ CICO as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete along with 20mm thick cement plaster in CM 1:3 with added integral water proofing compound @ 100ml/50kg cement including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.0 M height through authorised applicator and the same shall be got first approved from the GE before commencement of work. ) |
| 94 | S & F Solid PVC Wall Lining consisting of 5mm thick one side Pre laminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 95 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 96 | S&F for door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body. |
| 97 | Taking down copper/Aluminum point wiring (light,fan,bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent,regulators,sockets,light fitting etc.Removing materials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 98 | M&L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit heavy duty ISI marked of white/ivory colour including all accessories heavy duty ISI marked after chasing in wall/ceiling etc, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed for the following:- |
| 99 | One light point controlled by one way switch 5 Amps. |
| 100 | One fan/Exhaust fan point controlled by one way switch 5 Amps. |
| 101 | One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board |
| 102 | One 3 point 5 Amps switch socket outlet point controlled by one switch on independent board |
| 103 | S&F switch piano flush modular type, single pole, one way 6/5 Amp, 240 Volts complete all as specified & directed. |
| 104 | S&F modular socket multipurpose 5 pin, 6/5 Amp piano flush type, 240 Volts complete all as specified & directed. |
| 105 | S&F modular switch piano flush type,single pole, one way 16/15 Amp, 240 Volts complete all as specified & directed. |
| 106 | S&F modular socket 2 in 1, 3 pin, 16/15 Amp flush type, 240 Volts complete all as specified & directed. |
| 107 | S&F stepped type electronic fan regulator flush modular 2 module for BLDC fan type complete all as specified & directed. |
| 108 | Description all as per item no- 94 here in before but using 2.5 sqmm single core copper condutor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket combination point including necessary running of 2.5 sqmm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 109 | S&F Polycarbonate 10 W Round LED Panel Ceiling color changing light (Cool white/Warm white/Natural White) with complete accessories all as specified and as directed by Engr-in-Charge. |
| 110 | S&F LED Rope 144D Strip 3000 K IP65 warm white of 50M length complete with adaptor of suitable capacity and all accessories including all as specified and as directed by Engr-in-charge. |
| 111 | S&F wall mounted decorative ornamental type light fitting complete with driver, 2xholder, 2xLED lamp complete. |
| 112 | S&F ceiling fans complete with remote, blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including taking down old ceiling fans all as specified and as directed. |
| 113 | S&F LED luminaire 600mm x 600mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 114 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed. |
| 115 | Removing and refixing of ACs (1 TR to 2 TR) including inner and outer unit including refiling of suitable Gas and repair the damage insulation complete. |
| 116 | Removing and refixing of Busbar chamber including dismantling of cable and fixing the cable(5x cable upto 25 sqmm) with suitable lugs complete. |
| 117 | S&F for High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenchs and wall with including cutting chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and as directed. |
| 118 | S&F for Water Heater storage type (Geyser) vertical/horizontal type as per site requirement with inner container of capacity 25 ltrs glass line tank, Electrically operated AC 230 Volts BEE 5 Star rated ISI marked including 4 Nos of hold fashner nuts required suitable size fixed in bric wall, all necessary electrical and water supply connections with PVC connection pipe hot & cold complete all as specified and as directed. |
| 119 | S&F Single pole and neutral enclosure with 2 pin earth industrial plug and socket with one MCB SPN 20 AMPs including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces & fixing the same complete all as specified and directed.complete. |
| 120 | S&F Pressure booster pump capacity 0.5 HP with adjustable relay including pipe connection, fitting & fixture & cable connection complete all as specified and as directed. |
| 121 | S&F Ethernet cable (LAN) Cat6/Cat6a, Flat RJ45 LAN cable wire High Speed 250 MHZ/ 1 Gbps super fast speed UTP LAN cable,Network internet cable, Patch Computer Cord Gigabit category 6 wires for Modem GRAY 25 Meter including laid in concealed conduits all as specified and as directed. |
| 122 | S&F Ethernet 5-port Gigabit network switches suitable for Flat RJ45 LAN cable wire High Speed 250 MHZ/ 1 Gbps super fast speed UTP LAN cable,Network internet cable, Patch Computer Cord Gigabit category 6 wires for Modem all as specified and as directed. |
| 123 | S&F Ethernet wall plates and Keystone jacks suitable for Flat RJ45 LAN cable wire High Speed 250 MHZ/ 1 Gbps super fast speed UTP LAN cable,Network internet cable, Patch Computer Cord Gigabit category 6 wires for Modem all as specified and as directed. |
| 124 | M&L for sub main wiring with 2x4 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 4.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces complete all as specified and directed incl taking down unserviceable one complete all as specified and directed.NOTE: (a)Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 125 | M&L for sub main wiring with 2x6 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed.NOTE: (a) Two run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 126 | M&L for sub main wiring with 4x6 sqmm PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm (Nominal area) drawn through in and including PVC Conduit concealed type of suitable size with all fittings and accessories alongwith one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 6.0 sqmm as earth lead and connected to earth dolly including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces and taking down unserviceable one complete all as specified and directed.NOTE: (a) Four run of cable with one run of earth wire and one run of conduit ISI Marked will be measured as one length. (b) Unit rate includes for cutting chases for cunduits and sunken boxes and making good. |
| 127 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables(Heavy Duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4 core. |
| 128 | Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth and getting out in hard / dense soil for laying of cable / errection of poles / stay assembly etc complete all as specified and directed. |
| 129 | Supply and laying Double wall corrugated HDPE duct pipe 63mm outer dia confirming to IS: 16205 of approved colour with fittings for strip protection laid in trenches etc complete all as specified and directed. |
| 130 | S&F MCCB DB CRCA sheet powder coated VTPN DB LL 4 way double door factory made suitable for incorporating MCB as out going and MCCB as incoming including connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces incl taking down existing unsv DB of any size complete all as specified and as directed. |
| 131 | S&F MCCB 4 pole 100 Amps, 50Hz, 415 Volt with rupturing capacity 16 KA. |
| 132 | S&F MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for incorporating MCB as out going connecting incoming and outgoing cables and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces complete all as specified and as directed. |
| 133 | Removing & refixing of MCB DB CRCA sheet powder coated SPN 8 way double door factory made suitable for corporating MCB and flush to wall by making the hole in the wall and fixing the DB with cement work and plastering to match with existing surfaces complete all as specified and as directed. |
| 134 | S&F MCB SPN having braking capacity 10 KA, 35 to 60 Amp, 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed. |
| 135 | S&F MCB single pole having braking capacity 10 KA, 6 to 32 Amps 240 volts 'C' curve incl taking down unserviceable one complete all as specified and as directed. |
| 136 | S&F Aluminium housing cassing of suitable size for installation of LED rope including diffused plastic capping including all accessories complete all as specified and directed. |
| 137 | S&F Polycarbonate 15 W Round LED Panel Ceiling color changing light (Cool white/Warm white/Natural White) with complete accessories all as specified and as directed by Engr-in-Charge. |
| 138 | Removing and refixing of DBs upto 12 way and including cutting chases in brick/block/stone wall wherever necessary, replastering and making good to match with existing surfaces complete all as specified and directed. |
| 139 | S&F Metal flush box 2 module complete all as specified and directed. |
| 140 | S&F modular white cover plate with frame 2 module complete all as specified and directed. |
| 141 | S&F single phase motor starter 240 Volt, 50 Hz of capacity 25 Amp suitable of operation of air conditioner upto 2 TR complete all as specified and directed. |
| 142 | S&F modular socket outlet combination 2 in 1, 3 pin, 25/16 Amp 2 modules, 240 Volts complete all as specified & directed. |
| 143 | Supply,laying and testing cable XLPE Insulated, screened, PVC bedded,Galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 sqmm 2 core incl taking down old u/s cable . |
| 144 | Material and labour for clean dry tibba sand in trenches/ducts for cushoning to cable complete all as specified. (Punned thickness shall be measured & paid) |
| 145 | Supply and laying Double wall corrugated HDPE duct pipe 40mm outer dia confirming to IS: 14930 (Part-II) of approved colour with fittings for cable protection complete laid in trenches or fixed on walls with clamps of suitable size all as specified and directed by Engineer-in-charge. |
| 146 | M&L in replacement earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground (earth pit nbot less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below notmal ground level, connected to galvanised earth lead wire 4.0mm dia by means of suitable GI nuts/bolts and brazing/welding properly up to main board including earth pit in cement concrete 1:2:4 type B-1, MS sheet pit cover of checked plate 6mm having angle iron frame 25x25x3 with suitable handle, excavation and earth work in any type of soil and including medium grade GI watering pipe 25mm bore with funnel wire mesh and medium grade GI wire protection pipe 25mm bore up to main board complete as shown in electrical plate No 3 of MES schedule Part-I 2009, connected to earthing testing point complete all as specified and testing on completion complete all as specified and as directed. Note:- The units rate including the cost of excavation & earth work in any type of soil, charcoal & salt in alternate layers, 25mm GI pipe (light grade) for watering 25mm GI protection pipe (light grade) funnel wire mesh PCC chamber in PCC 1:3:6 type C-1 cast iron frame and MS cover made out of 6mm thick checkered plate hinged both end for open & close for pit etc & no extra payment will be made. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 14, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender