Tender For Addition/Alteration To Bldg No. P-4/6,P-51 And P93 At Af Stn Jammu Under Ge Af Jammu
Tender Value
34.70 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
69400
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Addition/Alteration To Bldg No. P-4/6,P-51 And P93 At Af Stn Jammu Under Ge Af Jammu
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of Cement concrete of any description & in any position not otherwise specifically provided for (unreinforced) complete all as specified an directed by Engr-in-charge.Note;- \\"Including removal demolished debris out of defence line and dumped at Govt approved duming area and no extra payment will be made to contractor against the same.\\" |
| 2 | M&L for PCC 1:4:8 type D-2(40 mm graded stone agg) as Foundation, Filling, mass concrete to fdn etcand including necessary formwork complete all as specified an directed by Engr-in-charge. |
| 3 | M&L for RCC M25 ( 20 mm agg) as in footing / plinth beam etc and including necessary formwork complete all as specified an directed by Engr-in-charge. |
| 4 | M&L for RCC M25 ( 20 mm agg) as in lintel beam/ roof beams etc and including necessary formwork complete all as specified an directed by Engr-in-charge. |
| 5 | M&L for RCC M25 ( 20 mm agg) as in columns/pillars etc and including necessary formwork complete all as specified an directed by Engr-in-charge. |
| 6 | M&L for TMT bars 10 mm dia and over cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified an directed by Engr-in-charge. |
| 7 | Ditto all as per above item 6 mm dia in stirrups spacers and binders etc. complete all as specified an directed by Engr-in-charge. |
| 8 | M&L Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius built in CM 1:4 and including demolition of brick work or stone/boulder masonry, built in cement mortar complete all as specified an directed by Engr-in-charge. |
| 9 | M&L Rendering 15mm thick in cement mortar 1:4 on fair faces of brick/concrete surfaces on walls mixed with liquid water proofing compound as per manufacturers instructions complete all as specified an directed by Engr-in-charge. |
| 10 | S& F Pre-painted galvalume aluminium zinc coated corrugated sheet (including pre-laminated guard film) 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws and including dismantling of asbestos cement sheets.complete all as specified an directed by Engr-in-charge. |
| 11 | Dismantling existing unservicable floor tile of any description including bedding/screed layer and M&L Vitrified dark/light/highlighter shade tiles double charge 9 to 10 mm thick (Square or rectangular ) polished , area of each tiles exc 0.18 sqm but not exc 0.38 sqm , in floors in repair,set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 (including hakcking of floors) to match shade, pattern, laying etc complete all as specified and directed by Engr in charge.Note;- \\"Including removal demolished debris out of defence line and dumped at Govt approved duming area and no extra payment will be made to contractor against the same.\\" |
| 12 | S&F in repairs Gl frame work (size of grid 605x605mm) for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long and including exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid complete all as specified and directed by Engr-in-charge. |
| 13 | Dismentling of wrought iron,mild steel work such as agle iron,flate and similar type work or any description not otherwise provided complete all specified and directed. |
| 14 | M&L Mild Steel sections confirming to FE-410-W as in Framed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge and any type of ornament pattern and design as approved by GE.Note:-1.Contractor shall not have any claim in respect of design/Ornamental shape/designer member,the differnece of rate and amount of desinger pattern will not be paid by Department. |
| 15 | M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge. |
| 16 | M&L preparation of new plastered surfaces of finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).and applying two coats of oil bond distemper with oil emulsion over a coat of 3mm wall puttycomplete all as specified and directed by Engineer-in- charge. |
| 17 | M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.18 sqm but not exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:6 (including hacking of floors) to match Shade, pattern, laying etc including taking down/demolition of existing tile/PCC Floor/Terrazo flooring including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same.complete all as specified and directed by Engineer-in- charge.Notes :- Design and colour shall be approved by GE/ User. |
| 18 | M&L for 300x600 x (7 to 8) mm thick coloured (Light & Dark Shade) glazed ceramic tiles of premium quality as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying at site including taking down of existing tile/plaster/terrazo dado including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as spd and directed by Engr-in-charge.Notes :- Design and colour shall be approved by GE/ User. |
| 19 | M&L for pre- polished granite slab machine cut of any shade as approved by GE of 18-20 mm thick inc over cement screed bed including edge Moulding,rounding to shape Cutting and nosing with suitable hole for cylender gas pipe, kitchen sink ,WHB, Grinding and Machine polishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in 15mm thick CM 1:4 in single piece for platform including taking down of existing tile work including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as specified and as directed by Engr-in-charge. |
| 20 | M&L RCC 1:2:4 type B-1 (20 mm graded stone agg) as in slab, supported on wall, shelves and similar type of work etc and including formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work and including demolition of cement concrete of (reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) and Including removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. complete.all as specified an directed by Engr-in-Charge. |
| 21 | M&L for 10 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement including taking down of existing Plaster complete all as specified as directed by Engineer-in-Charge. |
| 22 | M&L for making good the surface of chajja/facia/roof projection/ceiling etc by providing 10mm thick cement plaster 1:3 with anti-rust paint as per standared provision and necessary formwork,scaffolding required upto the 4th story including taking down of existing Plaster complete all as specified and directed and directed by engr-in-charge.Note :-No extra cost will be borne by department. |
| 23 | Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified an directed by Engr-in-charge.Note:- Including make good the Jam of window/Door to receive new door/window also no extra payment should be made to the contractor. |
| 24 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engineer-in- charge.Note:- Including make good the Jam of window/Door to receive new door/window also no extra payment should be made to the contractor. |
| 25 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,includinng taking down existing.all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 26 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws.includinng taking down existing .complete all as per architectural drawings and the directions of Engineer-in-charge. |
| 27 | M&L for Anodised Aluminium Grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the window frame with C.P. brass/ stainless steel screw @150 mm centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved aluminium standard section around the opening, all complete as per requirment and direction complete all as specified and directed by Engineer-in- charge. |
| 28 | S&F in repair 5.5mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in squar n exc 0.5 sq. m in each pane complete all as specified and as directed bu Engr-in-charge. |
| 29 | S&F in repair 4.0mm thick, figured glass,pin headed type and glazing with oil putty in square n exc 0.5 sqm in each panel with rouber beading, joining cleat etccomplete all as specified and as directed bu Engr-in-charge. |
| 30 | S&F stainless steel wire cloth 0.63 mm nominal dia of wire and avg wide 1.40 mm aperture of tinned tacks of galvanised wire staple to steel windowS&Fixed with wooden beads of 2nd class HW to wooden doors/windows complete all as specified an directed by Engr-in-charge. |
| 31 | Taking down wooden shutter of any dscription exc 1.00 sqm and n exc 2.00 Sqm ,easing and adjusting,butt hinge repair/change and necesarry welding work to be done and than refixing shutters with old builder hardware as required in the same opening complete all as specified an directed by Engr-in-charge. |
| 32 | S&F WPC board 18-20mm thick,one side UV printed designing and back side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet Front and sides of cabinate boxes and frame full size fitted under\\" cooking platform and other platform including fittings 125 mm size handle, 01 Nos per leaf, 125 mm tower bolts , 01 Nos per leaf, 125 mm size hasp and staple 01 Nos fittings.\\"etc and including dismantling boarding, any description complete all as specified an directed by Engr-in-charge. |
| 33 | S&F WPC board 18-20mm thick,both side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet self ,drawer, fitted under cooking platform and other platform including fittings etc and including dismantling boarding, any description complete all as specified and directed by Engineer-in- charge. |
| 34 | S&F WPC board 12mm thick,both side plain colour printed(weight of board should be 5-6kg per sqm of board) for cup board or kitchen cabinet back side shutter fitted under cooking platform and other platform including fittings etc complete and including dismantling boarding, any description all as specified and directed by Engineer-in- charge. |
| 35 | S&F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised .complete all as specified and directed by Engineer-in- charge. |
| 36 | S&F 40mm dia, brass polished cupboard knobs fixed with nut, screw and washer.complete all as specified and directed by Engineer-in- charge. |
| 37 | S&F 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as specified and directed by Engineer-in- charge. |
| 38 | S&F in repair stainless steel 25mm dia fancy type curtain rods fixed to wall with two no's of bracket,two no's of end ball and funnel including taking down of existing curtain rod.complete all as specified and directed by Engineer-in- charge. |
| 39 | S&F in repairs viterous china wash down water close (Pedestral pattern) EWC white and mild steels chromium plated or aluminium hinging device and connecting to 'P' or 'S' incl flush pipe 32mm dia and including PVC seat cover for EWC white colour complete with MS Hinged cromium plated and including 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle and including health faucet(ABS Body) mils steel CP sutabile for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook complete all as specified and directed by Engineer-in- charge. |
| 40 | S&F in repair Vitreous china wash hand basin, white , flat back, size 550 x 410X150 mm with brackets,wall hung wash basin with half pedstal height 440mm including cutting for and pinning in ends of brackets or erecting stand including bottle trap connected to 32mm pvc pipe and including in repair pillar double lever wash basin mixer (Hot nad cold) fancy type (swan neck) CP screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia.complete all as specified and directed by Engineer-in- charge. |
| 41 | S&F in repair stainless steel sink without draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 495mmx420mm with bowl size 410mm x330mm x 160mm including connected to 32 PVC pipe complete all as specified and directed by Engineer-in- charge. |
| 42 | S&F in repair fancy type Angle valve/stop cock cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed.complete all as specified an directed by Engr-in-charge. |
| 43 | S&F in repair Brass CP wall mixer (3 in1 mixer) for Hot and cold for 15mm bore complete fixed to connection complete all as specified an directed by Engr-in-charge. |
| 44 | S&F in repair Brass CP Sink mixer for Hot and cold for 15mm bore complete fixed to connection complete all as specified an directed by Engr-in-charge. |
| 45 | S and F in repair 15mm dia Bib taps fancy type,Cromium plated(CP)with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified an directed by Engr-in-charge. |
| 46 | S&F shelf fixed with and including Chromium plated brass screws and cleats ( Minimum weight 300 gms).complete all as specified and directed by Engr in charge. |
| 47 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nos of brass checknuts and washers complete all as specified an directed by Engr-in-charge. |
| 48 | S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size including shower arm length of 450mm fixing to steel pipe or union complete all as specified an directed by Engr-in-charge. |
| 49 | S&F stainless steel grating doom 125mm dia with waste hole.complete all as specified an directed by Engr-in-charge. |
| 50 | S&F waste coupling of steel (half or full threaded) 32 mm diacomplete all as specified an directed by Engr-in-charge. |
| 51 | M&L for CPVC pipe of 32mm outer dia connecting to waste coupling with reducer,elbow,unions as per ground requirement fit to wash hand basin with waste coupling complete all as specified an directed by Engr-in-charge. |
| 52 | S&F in repair soap dish,approximate size 160x160x90mm including Chromium plated brass screws and plastic cleats.complete all as specified and directed by Engr in charge. |
| 53 | S&F in repair Towel Rail 60 cm (D type) long of CP fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 190 gms) complete all as specified an directed by Engr-in-charge. |
| 54 | S&F white colour Rotational moulded polythene water storage tanks in square shape hoisted and fixed in position all as spd in SSR Part –I of capacity of tanks 1000 ltr capacity (Triple layer) incl PVC float valve 20mm dia,Tank Nipple,gate valve And including dismantling unservicable /cracked water tanks and removing from site capacity exe 500 ltr n.exe 1000 ltr complete all as spd and directed by Enr-in-charge.Add Note : Including demolition of existing RCC tank and making of brick pedstal for fixing new PVC water tank and removal demolished debris out of defence line and dumped at govt approved dumping area and no extra payment will be made to contractor against the same. |
| 55 | S&F in repair 5mm thick looking mirror of selected quality with and including stainless steel spacers and edging any size as directed by Engg-in-charge |
| 56 | S&F 20mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors And including taking up or down steel tubing for 15mm dia pipe and connections complete all as specified an directed by Engr-in-charge. |
| 57 | S&F 25mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. with all fittings; (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floors And including taking up or down steel tubing for 20mm dia pipe and connections complete all as spd and directed by Engg-in-Charge |
| 58 | Cutting chases,pinning for concealed water tubing of size 15mm dia and making good to facing where required and pointing in cement mortar 1;3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge. |
| 59 | S&F in PVC (SWR) pipes of size 75mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints.And including taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 75mm dia pipe.complete all as specified and directed by Engineer-in-Charge |
| 60 | S&F in PVC (SWR) pipes of size 110mm dia with single socket joints fixed to wall with stack clamp and rubber ring joints.And including taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 110mm dia pipe.complete all as specified and directed by Engineer-in-Charge |
| 61 | S&F in PVC (SWR) pipes of size 75mm dia with single socket joints fixed to floor with stack clamp and rubber ring joints.And including taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 75mm dia pipe.complete all as specified and directed by Engineer-in-Charge |
| 62 | S&F in PVC (SWR) pipes of size 110mm dia with single socket joints fixed to floor with stack clamp and rubber ring joints.And including taking up CI pipes,SWR pipes (incl all fittings),bend , floor traps with spigot and socket ends and lead joints incl burning out joints and removing lead of 75mm dia pipe.complete all as specified and directed by Engineer-in-Charge |
| 63 | S&F PVC (SWR) bends of any radius with access door bore of pipe 110 mm.complete all as specified an directed by Engr-in-charge. |
| 64 | S&F PVC (SWR) bends of any radius with access door bore of pipe 75 mm.complete all as specified an directed by Engr-in-charge. |
| 65 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 110 mm.complete all as specified an directed by Engr-in-charge. |
| 66 | S&F PVC (SWR) junction single(single T) equal or unequal with access door bore of pipe 75 mm.complete all as specified an directed by Engr-in-charge. |
| 67 | S&F PVC (SWR) reducer of any radius of pipe 75 mm.complete all as specified an directed by Engr-in-charge. |
| 68 | S&F PVC (SWR) vent cowl of any radius of pipe 75 mm. complete all as specified an directed by Engr-in-charge. |
| 69 | S&F PVC (SWR) Gully Trap pipe 100/125 mm jointed with solvent to PVC pipe complete all as specified an directed by Engr-in-charge. |
| 70 | M&L for preparation of New surface of walls and applying two coat of exterior emulsion/ Apex paint over a coat of primer incl filling gaps with wall care putty and applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor ,joinary ,surfaces,usage complete all as specified and directed by Engineer-in-charge. |
| 71 | M&L preparation of newly plastered surfaces of walls,Applying two coats of distemper with oil emulsion over a coat of primer including necessary formwork scaffolding required upto the 4th story complete all as specified an directed by Engr-in-charge. |
| 72 | M&L preparation of New Surface of ceiling and applying Two coat of whitewash so as to provide smooth sufaces complete all as specified an directed by Engr-in-charge. |
| 73 | M&L for complete removal of existing treatment on walls including preparation of old decorated surface of wall ,applying two coats of oil bound distemper paint on walls over a coat of primer with mechenical sprayer followed by roller and filling gaps with putty to make surface upto desired finish as app by Eng-in-charge complete all as specified an directed by Engr-in-charge. |
| 74 | M&L for preparation of old decorated surface of walls,scrapping down by mechanical means sender with internal dust extraction system for clean enviroment certified by manufacturer smoke ,soot,moulds,mos and efflorosent salt and trading oil and greese spotdown and stopping etc and applying two coat of exterior emulsion paint over a coat of primer including filling gaps with wall care putty and applied using airless spray technology and capable of operating single spray gun with a suitable hose length the spray machine should be reputed manufacturer with pro guard technology and capability of tracking pressure as well as paint and primer usage incl cleaning the floor ,joinary ,surfaces,usage complete all as specified and directed by Engineer-in-charge. |
| 75 | M&L preparation of old decorated surfaces of ceiling including scrapping down old damaged surface with mechanical/electrical sander,washing down with water and applying two coat of whitewash so as to provide smooth sufaces complete all as specified an directed by Engr-in-charge. |
| 76 | M&L for preparation of old decorated wooden surface applying one coats of synthetic enamel paint on wooden surfaces including necessary filling material as required at site to make the surface smooth and even complete all as specified and directed by Engr-in-Charge. |
| 77 | M&L for preparation of old decorated surface of steel,applying one coats of synthetic enamel paint on steel surfaces including necessary filling material as required at site to make the surface smooth and even.complete all as spd and directed by Engr-in-charge. |
| 78 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified an directed by Engr-in-charge. Please Enable Macros to View BoQ information |
| 79 | Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power)complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DB’s, meter board any type complete all as specified an directed by Engr-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender