Tender For maintenance and repair (Civil Related) Work In Residential Buildings Of Naukothiya Colony And maintenance and repair Work (Wood Work) In Residential And Non-Residential Buildings Of Cisf Colony, Unit-Pipri, Sonebhadra (U.P.)
Tender Value
7 Lakhs
Estimated cost
Bid Submission
23 Nov 2026
27 days left
EMD
14000
Bank guarantee accepted
Document Fee
826
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sonbhadra → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for maintenance and repair (Civil Related) Work In Residential Buildings Of Naukothiya Colony And maintenance and repair Work (Wood Work) In Residential And Non-Residential Buildings Of Cisf Colony, Unit-Pipri, Sonebhadra (U.P.)
BOQ
| Sl. No. | Item Description |
| 1 | Schedule-01: Maintenance and repair (civil related) work in residential buildings of Naukothiya Colony, Unit-Pipri, Sonebhadra. |
| 2 | Engagement of plumber/ fitter for non measured work such as installation of other sanitary fittings & fixtures, repair and maintenance work of internal water supply pipe line, cleaning of existing water pipeline of different dia upto 2\\" dia as per direction of engineer-in-charge with all T&P required. (Labour rates only) |
| 3 | Engagement of beldar/ coolie/ helper for non measured work such as site clearance, cleaning of roof terrace & sun shed, uprooting of vegetations from the outer wall, to assist the plumber, dismantling existing plaster, dismantling of ac sheet roofing, dismantling of cement concrete floor having base concrete including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 meters and other miscellaneous work as per direction of Engineer-in-charge. |
| 4 | Engagement of sweeper for sewerage cleaning & disposal of the sludge as per direction of Engineer-in-charge. |
| 5 | Cement concrete with cement, coarse sand and 2 cm nominal size stone ballast in proportion of 1:3:6 in foundation and under floors including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 6 | Cement concrete with cement, coarse sand and 2 cm nominal size approved hard stone ballast in proportion of 1:2:4 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of the work. |
| 7 | Steel work welded in built up sections, gratings, railings, brackets, gates and door fames, etc. wrought to required form including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and including cost of all other materials, labour and T&P etc. required for proper completion of the work. |
| 8 | Centering and shuttering of form work for RCC work including strutting, propping etc. & removal of form for roof slab & landings with 12 mm thick water proof ply including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 9 | Steel reinforcement for R.C.C. work with TMT bars of grade Fe-500D or more including straightening, cutting, bending, placing in position, its wastage, bend, hooks and authorized overlapping shall be measured all complete above plinth level including cost of all other materials, labour and T&P etc. required for proper completion of the work. |
| 10 | RCC work with cement, approved coarse sand and 2 cm gauge graded approved hard stone ballast in proportion of 1:2:4 in slab, excluding the cost of centering, shuttering and reinforcement but including its fixing and binding the same with binding wire, including cost of all other materials, binding wire, labour and T&P etc. required for proper completion of the work. |
| 11 | 1st class brick work in 1:6 cement and coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 12 | 1st class brick work in 1:6 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work for wall of one brick thickness including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 13 | 1st class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work for wall of half brick (115 mm) thickness including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 14 | 12 mm thick plaster with cement mortar in proportion of 1:6 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 15 | 12 mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 16 | 6 mm thick plaster with cement mortar in proportion of 1:3 cement and fine sand on ceiling including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 17 | 12 mm thick plaster finished with a floating coat of neat cement with cement mortar in proportion of 1:4 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 18 | 4.0 cm thick 1:2:4 plain cement concrete flooring with cement, coarse sand and 2 cm nominal size stone ballast laid in panels finished with a floating coat of neat cement, including cement slurry, as specified and removing overlapping mortar at the joints of the panels if any and giving them a uniform finish without base concrete including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 19 | Repair to plaster in patches including removal of old damaged surface of plaster racking out joints to 1 cm depth, watering the area and then replastering with 1:4 cement and coarse sand mortar including supply of all materials, labour and T&P etc. required for completion of the work. |
| 20 | P/F CP Brass Bib Cock 15 mm Ø ISI mark heavy quality including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 21 | P/F CP Brass Stop Cock 15 mm Ø ISI mark heavy quality including supply of all materials, labour and T&P required for proper complition of the work. |
| 22 | P/F 15 mm Ø PTMT (thermo plastic) bib cock including replacing of old bib cock complete. |
| 23 | P/F 15 mm Ø PTMT (thermo plastic) pillar cock including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 24 | P/F 75 mm Ø uPVC pipe (unplasticised Rigid PVC) for rain water down pipe or SWR pipe on wall face with specials such as tee, bend, socket, elbow, binding clip, etc. including cutting of pipe wherever necessary and including all materials, labour and T&P etc. required for proper completion of the work. |
| 25 | P/F 110 mm Ø uPVC pipe (unplasticised Rigid PVC) for rain water down pipe on wall face with specials such as tee, bend, socket, elbow, binding clip, etc. including cutting of pipe wherever necessary and including all materials, labour and T&P etc. required for proper completion of the work. |
| 26 | P/F water closet squatting pan (Indian type White Orissa Pattern W.C. pan of size 580x440 mm with integral type foot rests) with 100 mm Ø \\"P\\" or \\"S\\" trap, including flushing cistern having 10 litre low level white P.V.C. cistern, flush pipe with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 27 | P/F water closet squatting pan (Indian type White Orissa Pattern W.C. pan of size 580x440 mm with integral type foot rests) with 100 mm Ø \\"P\\" or \\"S\\" trap, excluding flushing cistern with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required and also including cost of all materials, labours and T&P etc. required for proper completion of the work. |
| 28 | P/F 10 litre capacity low level white PVC flushing cistern with all fittings and fixtures complete including cost of all materials, labour and T&P etc. required for proper completion of the work. |
| 29 | P/F 15 mm Ø G.I. pipes for internal work - exposed on wall complete with G.I. fittings such as bend, tee, socket, cross, clamp, etc. including cutting and making good the walls etc. including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 30 | P/F 15 mm Ø Chlorinated Polyvinyl Chloride (CPVC/ UPVC) pipes for internal work - exposed on wall, having thermal stability for hot & cold water supply, including bend, tee, socket, all plain & brass threaded fittings, including fixing the pipe with clamps at 1 m spacing including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 31 | P/F 20 mm Ø Chlorinated Polyvinyl Chloride (CPVC/ UPVC) pipes for internal work - exposed on wall, having thermal stability for hot & cold water supply, including bend, tee, socket, all plain & brass threaded fittings, including fixing the pipe with clamps at 1 m spacing including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 32 | P/F 15 mm Ø G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete for repair of pipeline including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 33 | P/F 15 mm Ø half turn gate valve with C.I. wheel of approved quality including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 34 | P/F polyethylene water storage tank on terrace (at all floor levels) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and base support for tank including required for proper completion of the work. |
| 35 | P/F 15 mm Ø PVC ball float valve with brass union & rod complete, high or low pressure with plastic floats including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 36 | P/F 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron using flats 30x6 mm for diagonal braces and central cross piece with all necessary fittings complete, including applying a priming coat of approved steel primer including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 37 | Maintenance and repair work (wood work) of doors, windows, etc. in residential and non-residential buildings of CISF Colony, Unit-Pipri, Sonebhadra. |
| 38 | Engagement of carpenter for non-measured work in repair and maintenance of wood work as per direction of Engineer-in-charge with all T&P required. (Labour rates only) |
| 39 | Engagement of beldar/ helper for non measured work such as site clearance, uprooting of vegetations from the outer wall, to assist the carpenter, dismantling of door & window shutter & chaukhats and other miscellaneous work as per direction of Engineer-in-charge. |
| 40 | Cement concrete with cement, coarse sand and 2 cm nominal size approved hard stone ballast in proportion of 1:2:4 including supply of all materials, labour, side shuttering if required and T&P etc. required for proper completion of the work. |
| 41 | Steel work welded in built up sections, gratings, railings, brackets, gates and door fames, etc. wrought to required form including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete and including cost of all other materials, labour and T&P etc. required for proper completion of the work. |
| 42 | P/F 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron using flats 30x6 mm for diagonal braces and central cross piece with all necessary fittings complete, including applying a priming coat of approved steel primer including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 43 | P/F hard drawn steel wire fabric 75x25 mm mesh to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer, drilling holes, washer, etc. and also including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 44 | Providing kiln seasoned country wood work in frames of doors, windows and other frames, wrought framed and fixed in position with hold fast lugs or dash fasteners (hold fast lugs or dash fastener shall be paid separately) of required dia & length as in chaukhats including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 45 | P/F kiln seasoned country wood 30 mm thick panelled or panelled and glazed shutters for doors, windows with necessary screws and including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 46 | P/F ISI marked 30 mm thick flush door shutters conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction including all materials, labour and T&P etc. required for proper completion of the work. |
| 47 | P/F fly proof galvanized M.S. wire gauge to windows, ventilators & openings as required using wire gauge with average width of aperture 1.4 mm in both directions and wood beading 62x19 mm with 0.63 mm dia. wire and including necessary screws, all materials, labour and T&P etc. required for proper completion of the work. |
| 48 | P/F ISI marked stainless steel L-drops 16 mm Ø x 250 mm size with necessary stainless steel screws including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 49 | P/F ISI marked oxidised M.S. tower bolt 100x10 mm size with necessary stainless steel screws including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 50 | P/F stainless steel butt hinges 100 mm size with necessary stainless steel screws including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 51 | P/F ISI marked oxidised M.S. single acting spring hinges 100 mm size with necessary screws including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 52 | P/F bright/ matt finished stainless steel handles 100 mm size of approved quality & make with necessary screws including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 53 | 1st class brick work in 1:4 cement and coarse sand mortar in super structure including necessary cutting and moulding of bricks as required and also including honeycomb brick work for wall of half brick (115 mm) thickness including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 54 | 12 mm thick plaster with cement mortar in proportion of 1:4 cement and coarse sand over brick work, minimum thickness not to be less than 10 mm including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 55 | Repair to plaster in patches including removal of old damaged surface of plaster racking out joints to 1 cm depth, watering the area and then replastering with 1:4 cement and coarse sand mortar including supply of all materials, labour and T&P etc. required for completion of the work. |
| 56 | Applying priming coat (one coat) with ready mixed iron oxide/wood primer on new surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 57 | Painting with synthetic enamel paint two coats of superior quality of approved make of required shade on new/ old wooden/ iron surface including cleaning and sand papering and making smooth surface including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 58 | Hire charges of single phase portable welding set including cost of electrode along with the driver. |
| 59 | P/F 24 gauge annodized aluminium sheet of approved quality including cutting, wastage and fixing the same over the wooden door shutters with nails with all materials, labour and T&P etc. required for proper completion of the work. |
| 60 | P/F 4 mm thick float glass panes in panelled or panelled and glazed shutters for doors, windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 61 | P/F 12 mm thick plain particle board flat pressed, 3 layer or graded wood particle board medium density ISI marked panelling in panelled shutters for doors, windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured) including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 62 | P/F 25 mm Ø chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc. wherever necessary complete and including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 63 | P/F aluminium extruded section body tubular type universal hydraulic door closer (door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with necessary accessories, screws, etc. and including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 64 | P/F ISI marked aluminium hanging floor twin rubber door stopper with necessary screws and including supply of all materials, labour and T&P etc. required for proper completion of the work. |
| 65 | Labour cess @ 1% on value of all above itemes Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 23, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 27 daysNov 25, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 29 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender