Tender For Installation Of Crash Barriers, Table-Top Speed Breakers, Rumble Strips, And Signboards At Various Chainages Along The Hamidpur-Sikandrabad-Kuchesar Road (Sh No. 100).
Tender Value
8 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
3 days left
EMD
80000
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hathras → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Installation Of Crash Barriers, Table-Top Speed Breakers, Rumble Strips, And Signboards At Various Chainages Along The Hamidpur-Sikandrabad-Kuchesar Road (Sh No. 100).
BOQ
| Sl. No. | Item Description |
| 1 | Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes..Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 2 | Provinding and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes..Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 3 | Supply and fixing of raised pavement marker (Cat Eye/Road stud wtihour shank) with Made of Plastic body of RPM/Road Stud shall be moolded from ASA (Acrylic Styrne Acrylonitrite) or HIPS (High Impact Polystyrene) or Acrylonitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer. The marker shall support a load of 13.635 kg tested in accordance with ASTM D4280. The Reflective panels shall consist of number of lenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face, lenses shall be mouled of meithyl methecrylate confirming to ASTM D788 of equivalent. The slop or retro-reflecting surface shall preferably be 35+/-5 degree to base and the area of each retro-reflecting surface shall not be less than 13.00 sq.cm the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm. The base of the marker shall be flat within 1.3 mm all road studs shall be legibly marked with the name, trade or other means of identification of the manufacture epoxy installations, excess adhesive around the edge of the marker excess adhesive on the pavement and adhesive on the exposed surface of the marker shall be immediately removed. The Contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflecting panel, to the Engineer in addtion a two year warranty for satisfactory infield performance of the finished road marker shall also be given by the contractor who carries out the work of fixing of reflective road markers, in case the markers are displaced, damaged, get wom out or lose their reflectivity compared to stipulated standard the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer, at his own cost. The rate shall include all material, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-charge..Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST.RPM (with Shank) |
| 4 | Providing & Fixing of Retro-reflectorised Traffic sign as per IRC 67-2012Providing and fixing of retro-reflectorised cautionary mandatory and informatory sign as per IRC:67 made of High Intensity grade sheeting type-IV vide clause 801.3, fixed over 2mm thick aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cms below ground level as per approved drawing. The retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrikage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International / Government laboratory/ institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from indian condition within 3 years of launching of product by the manufature in abroad. Alternatively a certificate conforming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in india can be accepted provisionally. In such a situation, the employer / client, if so desires, could seek for a performance guarantee which could be released after receipt of certificate meeting the requirements of three years outdoor weathering of the sheeting as per IRC 67:2012, legends, letters, numerals and borders etc. should be as per MoRTH specification no.-801.3.7. 90 cm equilateral triangle with definitation plate sign board size (20cmx60cm)(S.I. No-22.20) |
| 5 | Providing & Fixing of Retro-reflectorised Traffic sign as per IRC 67-2012 all compelete same as Item -4 of B.O.Q. , but for 90.0 cm. High Octagon Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 6 | Providing & Fixing of Retro-reflectorised Traffic sign as per IRC 67-2012 all compelete same as Item -4 of B.O.Q. , but for80x60 cm rectangular with deffinintion plate (20x60 cm) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. |
| 7 | Providing & Fixing of Retro-reflectorised Traffic sign as per IRC 67-2012 all compelete same as Item -4 of B.O.Q. , but for60 cm Circular with deffinintion plate (20x60 cm) Including cost of, all material, labour, T&P, all taxes and labour cess complete. But excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender