Tender for Tender for Lot 28 Ambedkar Ravidas Mandir Ambedkar Site Renovation And Beautification Work
Tender Value
8.45 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
6 days left
EMD
17000
Bank guarantee accepted
Document Fee
856
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ballia → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Lot 28 Ambedkar Ravidas Mandir Ambedkar Site Renovation And Beautification Work
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (Hydraulicexcavator) / manual means over areas (exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan)including getting out and disposal of excavated earth lead upto 50m and for all lift, as directed by Engineer-in-charge .DSR2.6.1(2023) |
| 2 | 1:4:8 (1Cement:4coarse sand (zone-Ill) derived from natural sources :8 graded stone aggregate 40mm nominal size derived from natural sources) DSR 4.1.8 (2023) |
| 3 | Brick work with common burnt clay F.P.S. (non modular)bricks of class designation 7.5 in foundation and plinth in :Cement mortar 1:4 (1cement:4coarsesand) DSR6.1.1(2023) |
| 4 | Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR 2.25A |
| 5 | Concrete with 40 mm gauge brickballast,fine sand of 1.25F.M and cement in proportion of 1:6:12 under floor.SI No 275 |
| 6 | Rubber Moulded Reflective Zig-Zag 80 mm thick Providing and Laying of Interlocking Concrete Block Pavements having thikness 80 mm as pe rdrawing and technical specification clause 1504 |
| 7 | Providing and laying in position specified grad of reinforced cement concrete ,excluding the cost of centering ,shuttering ,finishing and reinforcement-All work upto plinth level: 1:1.5:3(1cement:1.5coarsesand(zone-lll)derived from natural sources: 3graded stone aggregate 20mm nominal size derived from natural sources) DSR 5.1.2 (2023) |
| 8 | Centering and shuttering including strutting , propping etc.and removal of form for Foundations,footings,bases of columns, etc. for mass concrete DSR 5.9.1 |
| 9 | Providing and laying in position specified grade of reinforced cement concrete ,excluding the cost of centering ,shuttering ,finishing and reinforcement-All work upto plinth level :1:2:4(1cement:2coarsesand(zone-lll)derived from natural sources :4graded stone aggregate 20 mm nominal size derived from natural sources)DSR5.1.3(2023) |
| 10 | Centering and shuttering including strutting, propping etc.and removal of form for Lintels,beams ,plinth beams,girders, bressumers and cantilevers DSR 5.9.5 |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, post sand struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1cement:1.5coarsesand(zone-lll)derived from natural sources: 3graded stone aggregate 20mm nominal size derived from natural sources) DSR5.2.2 (2023)Wall |
| 12 | Centering and shuttering including strutting ,propping etc .and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts DSR 5.9.6 |
| 13 | Brick work with common burnt clay F.P.S.(nonmodular)bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in: Cement mortar 1:4 (1cement:4coarsesand) DSR6.4.1(2023) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars DSR 5.1.3 (2023) DSR 5.22.1 (2023) |
| 15 | 12 mm cement plaster of mix:1:4 (1cement:4 coarse sand) DSR 13.4.1 (2023) |
| 16 | Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C.1:3:6 (1Cement : 3coarse sand:6 graded stone aggregate 20 mm nominal size). DSR 10.13.1 (2023) |
| 17 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43Itr/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10sqm)DSR 13.47.1 (2023) |
| 18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR 13.62.1 (2023) |
| 19 | Supply of Steel Bench including supply of all materials labours T&P etc required for proper completion of the work |
| 20 | S/F of Signboard and photography |
| 21 | lksyj ih0oh0 ekM~;qy {kerk 440 okV ihd ¼110 okV x 4 ux½ fyfFk;e Qsjks Ql¶sV cSVjh {kerk 12-80 cksYV 200 baih;j voj ¼50 ,0,p0 x 4 ux½ ,ybZMh Y;qfeukj {kerk vf/kdre 18 okV gkV Vhi Xysc ukbTM vkbju vDVkxksuy iksy dscy cSVjh ckWDl ,oa vU; gkMZ o;j ¼vuqca/kkuqlkj½ leLr dj lfgrA Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 24, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 8 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender