Tender For Repair To Miscellaneous B/R Works In Central Amenities Under Age B/R-Ii Of Ge (N) Mamun.
Tender Value
25 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
19 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pathankot → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair To Miscellaneous B/R Works In Central Amenities Under Age B/R-Ii Of Ge (N) Mamun.
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 2 | M&L for rendering 10mm thick on other than fair faces of brick or concrete surfaces in cement mortar 1:6, finished even and smooth without using extra cement, complete all as specified and as directed. |
| 3 | Preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of alkali resistant primer including thin layer (1mm thick) of wall care putty and priming coat, complete all as specified and directed. |
| 4 | M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 and finishing even and smooth without using extra cement using integral water proofing compound, complete all as specified and directed. (WPC shall be measured and paid separately). |
| 5 | Preparation of new surface of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed. |
| 6 | M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces of ceiling soffits of slabs, chajjas, columns and beams etc in CM 1:3 and finishing even and smooth without using extra cement, complete all as specified and directed. |
| 7 | Preparation of newly plastered surfaces of ceiling and applying three coats of white wash, complete all as specified and directed. |
| 8 | M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces of fascia / edging / ceiling of Chajjas, roof projections etc in CM 1:3 and finishing even and smooth without using extra cement including taking out peeled off plaster / concrete and making the line in true shape, complete all as specified and directed. |
| 9 | Preparation of newly plastered surfaces of wall sides and soffits of the beams, ceilings, fascia's, parapets etc. and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, complete all as specified and directed. |
| 10 | Supply only Liquid water proofing compound, complete all as specified and directed. |
| 11 | M&L for Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4 including dismantling of tiling including cement mortar bedding, complete all as specified and directed. |
| 12 | M&L for Glazed ceramic tile 300x600x07-8mm thick (coloured) on vertical surfaces such as wall, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 10mm thick screed bed in CM 1:4 including dismantling of tiling including cement mortar bedding, complete all as specified and directed. |
| 13 | M&L for joint free Non skid ceramic coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM 1:4 including dismantling of tiling including cement mortar bedding, complete all as specified and directed. |
| 14 | M&L for 15-16mm thick granite (of any type) work (table rubbed and polished) as in decorative shelves, steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:4 and including demolition of existing stone slab and tiles, complete all as specified and directed. |
| 15 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) n exc. 1.5 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 16 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door / window / Ceosetory windows and other Frames / Chowkhat of size 50 x 100mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water / moisture proof and fire retardantand fixed in position with MS hold fast / lugs /SS dash fasteners of required dia and length (M.S. hold fast / lugs or SS dash fasteners shall be paid for separately), complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | S&F 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite / borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws (stainless steel butt hinges and necessary S.S screws shall be paid separately), complete all as specified and directed. |
| 18 | Taking down Chowkhats or frames with shutters (without taking off shutters from the frames) exc. 1.5 Sqm but n exc 4.0 Sqm and credited to the contractor, complete all as specified and directedNote: The damaged portion of the tiles / rendering shall be made good with the same material to match with the adjacent surface. |
| 19 | Taking down shutters of any description size of shutter exc 1 Sqm but n.exc 2 Sqm and removing from site complete all as specified and directed. |
| 20 | S&F for pressed steel frame made out of mild steel 1.25mm thick sheet, with size of frame 125x60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. and applying a shop coat of red oxide primer including providing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frame, complete all as specified and directed. |
| 21 | S&F for pressed steel frame made out of mild steel 1.25mm thick sheet, with size of frame 105x60mm for doors / windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. and applying a shop coat of red oxide primer including providing PCC 1:3:6, type C-0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frame, complete all as specified and directed. |
| 22 | S&F 35mm thick 2nd class hardwood plain framed, panelled shutter (two panel), factory made, with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 23 | S&F 35mm thick 2nd class hardwood, factory made, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 24 | Preparation of new wood and wood based surfaces of any description exc 10cm with or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 25 | S&F 250mm long stainless steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6mm bolts and nuts four on bolt plate and two on stalle plate, complete all as specified and directed. |
| 26 | S&F 100mm long stainless steel hinges, complete all as specified and directed.. |
| 27 | S&F 150mm long stainless steel door handles, complete all as specified and directed.. |
| 28 | S&F 150mm size stainless steel, barrel tower bolts, complete all as specified and directed. |
| 29 | S&F 300mm mild steel ordinary rat tail pattern springs for door including rollers and roller plate, complete all as specified and directed. |
| 30 | S&F Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks, 1:2:4 type-B0, (using 12.5mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. complete all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3, complete all as specified and directed. |
| 31 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm, complete all as specified and directed. |
| 32 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 33 | S&F in repairs 150mm size stainless steel, barrel tower bolts, complete all as specified and directed. |
| 34 | S&F in repairs 150mm size stainless steel handles, complete all as specified and directed. |
| 35 | S&F in repairs 300mm long stainless steel sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet and fixing bolts, complete all as specified and directed. |
| 36 | S&F in repairs 125mm dia grating doom with waste hole / without hole of PTMT (Minimum weight 40gms), complete all as specified and directed. |
| 37 | S&F in repairs 18mm thick HDHMR ( high density high moisture resistance) board one side colour another side white in kitchen and bed room cup board fixed with nails, complete all as specified and directed. |
| 38 | S&F 30mm width of flaps (when open) continuous (piano) hinges, stainless steel, bright finish or electro galvanised, complete all as specified and directed. |
| 39 | S&F stainless steel auto, zero crank hinges, fancy type with concealed pattern fitted to shutters, complete all as specified and directed. |
| 40 | S&F Magic catcher for shutter fitted with suitable screws, complete all as specified and directed. |
| 41 | S&F 100mm size stainless steel, barrel tower bolts, complete all as specified and directed. |
| 42 | S&F 75mm size Hasp & Staple safety type stainless steel with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and directed. |
| 43 | S&F in repairs 15mm bore bib tap, cast copper alloy, chromium plated, fancy type, long body with crutch or butterfly handle, screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 44 | S&F in repairs 15mm bore stop valve, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed both ends including necessary fittings such as sockets for pipe or for union, complete all as specified and directed. |
| 45 | S&F in repairs 15mm bore stop valve / angle valve, cast copper alloy, chromium plated, fancy type, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe, complete all as specified and directed. |
| 46 | S&F in repairs 75mm swivel shower of CP with shower arm 125mm size for fixing with 15 mm bore GI pipe, complete all as specified and directed . |
| 47 | S&F in repairs brass chromium plated tubular towel rail 20mm dia \\"D\\" type 60cm long between flanges, complete all as specified and directed. |
| 48 | S&F in repairs sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm, complete all as specified and directed. |
| 49 | S&F in repairs vitreous china wash hand basin, white flat back, size of 550x400mm including cutting for and pinning in ends of brackets (including supply and fixing of brackets) or erecting stand, 32mm brass chromium plated waste fitting with long screwed shank and fly nut flanged end bedded in red led cement, chain and plug and porcelain stopper, complete all as specified and directed. |
| 50 | S&F in repairs for 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6 mm thick PVC / AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed |
| 51 | S&F in repairs 10 litre capacity PVC valveless, Syphonic action type, flushing cistern low level, white with inlet ball valve, float and handle including brackets and PVC flush pipe etc., complete all as specified and directed. |
| 52 | S&F in repairs Vitreous china squatting pan, Orissa pattern, size 580 x 440mm and making good, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., including trap set in and including concrete, complete all as specified and directed. |
| 53 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, PVC cover sheet in same colour etc., complete all as specified and directed. |
| 54 | S&F in repairs plastic water closet seat cover closed pattern with flat bottom cover and mild steel chromium plated or aluminized hinging device, complete all as specified and directed. |
| 55 | S&F in repairs 25mm dia stainless steel drapery curtain rods, chromium plated including ornamental brackets, clamps etc., complete all as specified and directed. |
| 56 | Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 57 | Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and directed. |
| 58 | S&F 15mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 59 | Refixing old GI pipe 15mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 60 | S&F 20mm bore tubes, medium grade, galvanised, with all fitting, ( such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc.) and fixed complete to and ceiling with clips, wall hooks, wooden plugs or laid in floors including screwing and waste and for forged bends on piping as required, complete all as specified and directed. |
| 61 | Refixing old GI pipe 20mm bore & connections in new or old position to walls and ceiling or laid in floor, complete all as specified and directed. |
| 62 | S&F in repairs 20mm dia Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 63 | S&F in repairs 15mm bore pillar tap, cast copper alloy quarter turn, chromium plated, fancy type, CP screwed down high pressure, complete all as specified and directed. |
| 64 | S&F in repairs 32mm dia bore PVC flexible waste pipe, complete all as specified and directed. |
| 65 | S&F in repairs 15mm size PVC connections with PTMT nuts of length 450mm, complete all as specified and directed. |
| 66 | S&F in repairs 20mm dia PVC ball cock (PVC float valves) complete high pressure with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut., complete all as specified and directed. |
| 67 | S&F in repairs Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed. |
| 68 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beading in squares not exceeding 0.50 Sqm including hacking out old broken glass, complete all as specified and directed. |
| 69 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 70 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling existing water tank and removing from site, complete all as specified and directed. |
| 71 | Demolition of cement concrete (unreinforced) of any description in any position, complete all as specified and directed. |
| 72 | M&L for 75mm thick plain cement concrete, 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in sub base, complete all as specified and directed. |
| 73 | M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006, M-35 with grey cement and pigment over and including 40mm thick compacted bed of fine sand, complete all as specified and direction. |
| 74 | M&L for machine pressed glossy finished 25mm thick coloured cement concrete chequered tiles of size 300mm x 300mm of pattern as approved, set, jointed and pointed in neat slurry in floors over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and directed. |
| 75 | M&L for 75mm thick plain cement concrete, 1:3:6, type C-2 (using 40mm graded crushed stone aggregate) as in pavement / plinth protection, plinth protection shall be laid in alternate bays including making joints at every 2.5m and joints shall be filled with bitumastic gola with 80/25 bitumen (1 part bitumen mixed with 3 part of sand) finishing surface even and smooth without extra cement, complete all as specified and as directed. |
| 76 | M&L for 100mm thick precast cement concrete blocks, 1:2:4, type B-1 (using 20 mm graded crushed stone aggregate) with plain or interlocking joints as directed, complete as in kerb and setting in CM 1:4 including chamfering, all as directed by Engr-in-Charge. |
| 77 | S&F in repairs 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed |
| 78 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or fixed to walls, complete all as specified and directed |
| 79 | S&F 75mm size PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 80 | S&F 110mm size PVC (SWR) bends of any radius, complete all as specified and as directed. |
| 81 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 82 | S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door, complete all as specified and directed. |
| 83 | Demolition of reinforced cement concrete of roofs,floors(other than ground floors), beams, staircase, landings, chajjas and similar suspended work, complete all as specified and directed. |
| 84 | M&L for Reinforced cement concrete, 1:1.5:3, Type A-1 (using 20 mm graded crushed stone aggregate) for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including form work, complete all as specified and directed. |
| 85 | M&L for MS TMT bars 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 86 | M&L for MS TMT bars 6 to 8mm dia, cut to length bent to shape required including cranking, bending spirally for hooking for columns, hooking ends and binding with and including mils steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 87 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed. |
| 88 | M&L for brick work with sub class 'B' bricks (using old size bricks) straight or curved on plan to any radius in half brick thick wall radius, built in CM 1:4, complete all as specified and directed. |
| 89 | M&L for brick work with sub-class `B' bricks (using old size bricks), straight or curved on plan exceeding 6m mean radius built in CM 1:6, Complete all as specified and directed. |
| 90 | S&F in repairs CP Health faucet fixed with spring action and lever along with flexible shower hose with brass nut of length 1.0m fitted in the existing water connection in the toilets, complete all as specified and directed. |
| 91 | S&F in repairs 5.5mm thick sheet glass shelf assembly consisting sheet glass, chromium plated, 600mm long and 120mm wide with chromium plated brackets, guard bar and railing, complete all as specified and directed. |
| 92 | S&F in repairs 140mm floor door stopper of stainless steel body and tongue anodised with hard drawn steel spring overall length of cover plate, fixed with screws, complete all as specified and directed. |
| 93 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregates), as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. Please Enable Macros to View BoQ information |
| 94 | M&L for plain cement concrete, 1:2:4, type B-1 (using 20mm graded crushed stone aggregates), as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender