Tender For Special Repair To Bldg No P-50 At Gs Sarna Enclave Under Ge (West) Jabalpur
Tender Value
21.76 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
9 days left
EMD
43520
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jabalpur → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-50 At Gs Sarna Enclave Under Ge (West) Jabalpur
BOQ
| Sl. No. | Item Description |
| 1 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar (1:6) finished even and smooth w/o using extra cement complete all as specified & directed |
| 3 | M&L for rendering 10mm thick on brick work or concrete surfaces in cement mortar (1:4) finished even and smooth w/o using extra cement complete and using WPC by 3% of weight of cement used all as specified & directed. Note : WPC will be measured seprately. |
| 4 | Supply only Integral water proofing compound all as spefied and directed. |
| 5 | M&L for applying two coat of distemper oil emulsion averaging minimum 2mm thick birla white wall care putty over a coat of alkali resistant cement based primer on wall/ceiling surfaces & smoothening the surfaces with sand papers etc., including complete removal of existing treatment of any description (such as OBD/ plastic emulsion/ interior/ exterior emulsion paint etc) before applying OBD on new/old surafaces all as specified and directed. |
| 6 | Material & Labour for preparation new/old plastered surfaces and walls including cornices, pilasters etc and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 7 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) |
| 8 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames) |
| 9 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant after complete as directed as speicifed Make : Rajshree or equivelent |
| 10 | S & F in repair Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant after complete as directed as speicifed Make : Rajshree or equivelent |
| 11 | S & F in repair Factory made single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 12 | S & F in repair Door spring ordinary rat tail rod pattern springs including roller and roller plate complete of mild steel 300 mm long complete. |
| 13 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, 3 track sliding type without sash bars, aluminium sections 40x18x1.55mm including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings. Glass, wiremesh and frame to be measured saperately complete all as specified and as directed. |
| 14 | Supply & Fixing 'in repair' 18 mm thick, PVC sheet one side 1mm prefemlaminated of approved texture (\\"Celuca ply of Rajshree make or equivalent in \\"Sintex\\" as approved by GE ) as in Kitchen cabinet (withshelves and partitions) inas per manuacturer's instructions complete all as specified & directed. |
| 15 | S&F in repair stainless steel kitchen basket in various type of basket plain basket height 4'' Thali basket 8\\" height Cup saucer 4\\" height and performance cultlury basket 4'' height all as specified and directed. |
| 16 | S&F in repair hattich channel for basket sizes 600mm long and 46mm wide all as specified and directed. |
| 17 | S&F in repair stainless stell handle for basket size 6'' all as specified and directed. |
| 18 | S&F in repair stainless steel auto closing concealed hinges 9.5 crancks for half overlay doors with opening angle 95*(14-32mm) with adjustment 4mm complete all as specified Make: Godrej/Hettich |
| 19 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm with stainless steel wire staples |
| 20 | S&F Aluminium handles 150mm size, cast type, anodised |
| 21 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section. |
| 22 | Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, |
| 23 | S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy. |
| 24 | S&F in repair Curtain dropary 25 mm dia PVC Coating mild steel fancy type rod of fancy type including brass and brackets with curtain rings of approved quality etc complete. |
| 25 | Applying two coats of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of pink primer |
| 26 | Applying two coats of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of new surface & applying one coat of red oxide, zinc chrome |
| 27 | M&L for complete removal of existing treatment on wall and applying two coat of oil bound distemper over a coat of alkali resistance primer over a coat of wall care putty (to an average thickness of 2mm )thick including necessary scaffolding arrangement as required at site all as specified and directed. |
| 28 | M&L for preparation of old ceiling surfaces and applying two coat of white wash on ceiling ovecomplete all as spd and directed. |
| 29 | M&L for complete removal of existing surface of wall and applying two coats of cement base paint, over a coat of white cement primer complete all as specified and directed.. |
| 30 | S&F frame work such as grills, grating etc with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, barred iron doors, ladders etc and similar works conforming to Fe-410-0 complete all as specified and directed. |
| 31 | M & L for PCC 1:2:4 type B1 using 20 mm graded aggregate as in bed block/hold fast blocks, padding, chajjas repair, benching and coping etc with & including necessary form work for fair faces of concrete, complete all as specified and directed |
| 32 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including jointing with solvent, grinding, rounding to edges and polishing complete |
| 33 | M&L for plain Cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) in sub basefilling and mass concrete all as specified and directed |
| 34 | M&L for 75 mm thick plinth protection in/Subbase PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) complete all as specified and directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 36 | M&L double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, Double tiles charged tiles in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed |
| 37 | ditto- all as per item above but in skirting laid over and including 10 mm thick plaster in CM 1:4 complete all as specified & directed. |
| 38 | M&L plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone agg) as in filling under undulation of roof top/chajja/beam etc with and incl necessary formwork complete all as specified and directed. |
| 39 | Removal of existing detoriated decayed tarfelt or any other treatement incl PCC padding , loose surface and removing the debris to a distance n exc 50 mtr depositing where directed complete all as specified. |
| 40 | M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through manufacturer / authorized applicator of the manufacturer including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete |
| 41 | (i) M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete. |
| 42 | (ii) Applying a coat of oxidised bitumen based solvent primer @ 0.3 Kg / Sqm |
| 43 | (iii) Applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 kg/ Sqm incl cleaning surfaces. |
| 44 | (iv) Laying 3 mm thick unrolled over the bitumen coated surface, polymeric water proofing membrane Hyperplas standard wt not less than 3kg /Sqm with 100 mm over laps shall be sealed by flame as per manufacturers instruction. |
| 45 | (iv) Applying two coats of bituminous base aluminium paint including preparation complete |
| 46 | M&L 25mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finishing cement concrete surface even and rough complete all as specified and directed. |
| 47 | S&F in repairs Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain & plug & porcelain stopper but including brackets |
| 48 | S&F in repairs PVC valveless, syphonic action type, flushing cistern 10 litr capacity, low level, white, with intel, ball valve, float & handle including brackets |
| 49 | S&F in repairs CP Pillar taps fancy type 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe |
| 50 | M&L PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement |
| 51 | S&F Grating doom 100 mm dia of PTMT (min. weight 25 gms) |
| 52 | S&F in repairs Vireous china wash down water closet pan(pedestal pattern),white(excluding fixing bolts, flushing cistern and flush pipe) with Plastic water closet seat black,closed pattern with flat bottom and, cover and mild steel chromium plated or aluminium hinging device and wash down water closet(pedestal pattern) complete as specified |
| 53 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with bead incl Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane |
| 54 | 3 mm thick sheet frosted glass and glazing with oil putty or fixed with bead / glazing pins in squares size n.exc 0.5 sqm in each pane all as specified and directed. |
| 55 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as spd. |
| 56 | PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. Make:Paryag/Polytech |
| 57 | S&F in repair bib tap fancy type chromium plated screwed for iron pipe of 15mm bore complete all as specified and directe |
| 58 | Treatment of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cementmortar 1:2 (1 cement: 2 coarse sand) to match the existing floors |
| 59 | Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron |
| 60 | S&F in repair Angle valves 15 mm bore fancy type, CP, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions. |
| 61 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 62 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm (Make Nirali ModelOlympia or equivalent of Prayag) |
| 63 | S&F in repairs Brass CP shower rose 125mm size |
| 64 | S&F Aluminium anodised Tubular towel rail 20mm dia, D type, 60cm long between flanges incl bracket etc. fixed in repair. |
| 65 | S & F in repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 66 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified |
| 67 | Supply and fix, in repair, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ laid in trenches, with & including necessary clamps of requird size etccomplete all as specifed & directed. |
| 68 | Supply and fix, in repair, 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ laid in trenches, with & including necessary clamps of requird size etccomplete all as specifed & directed. |
| 69 | S&F PVC (SWR) bends ISI marked any radius of 75mm bore complete all as specified and directed |
| 70 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed. |
| 71 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed. |
| 72 | S&F PVC (SWR) junction single, (single T) equal or unequal, of 75 mm bore of pipe complete all as specified and directed. |
| 73 | S&F PVC (SWR) junction single, (single T) equal or unequal, of 75 mm bore of pipe with access door complete all as specified and directed. |
| 74 | S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal, complete all as specified and directed. |
| 75 | Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, of size 15mm bore of pipe complete all as specified and as directed |
| 76 | Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, of size 20mm bore of pipe complete all as specified and as directed |
| 77 | Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, of size 25mm bore of pipe complete all as specified and as directed |
| 78 | Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed |
| 79 | Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed. |
| 80 | Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed. |
| 81 | S&F in repairs Soap dish (CP) complete all as directed. |
| 82 | Taking down carefully any type point wiring (light, fan, socket bell or power) , complete with fitting such as switches ceiling roses,lamp holders sockets,regulators,call bell light fitting with PVC conduit surface /concealed or wooden pattens including sunken cast iron /pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge. |
| 83 | Taking down carefully Main switch and Distribution boards any make and size . |
| 84 | Taking down the ceiling fan/exhaust fan in situ complete all as specified and directed. |
| 85 | Taking down carefully Old unserviceable any type sub main wiring with wooden batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified and directed by Engineer in charge. |
| 86 | M/L for Sub Main Wiring two single core PVC insulated copper conductor FRLSH cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting,fixing accessories and one run of 6.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :-Two Nos of 6.0 Sqmm Wire and one No of 6.0 Sqmm Earth wire in One RM length Measured as one unit length. |
| 87 | M/L for Sub Main Wiring with two single core PVC insulated copper conductor FRLSH cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting,fixing accessories and 4.00 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge Note :- Two Nos of 4.00 Sqmm Wire and One No of 4.0 Sqmm Earth wire in One RM length Measured as one unit length. |
| 88 | Material & Labour for point wiring with three layer PVC Insulated 1.5 Sqmm multi-strand copper conductor FRLSH cable 1100 Volts grade drawn into and concealed PVC conduits medium grade not less than 20mm( ISI marked) including all fitting and fixing accessories including 1.25 mm thick sunken pressed steel terminal boxes/Modular metal flush box duly painted with two coats of anti-corrosive paint outside and two coats of aluminium paint inside with and including 3mm thick hylam brand laminated white bakelite sheet cover for mounting switches, sockets, fan regulators fixed with CP screws with cup wahsers and PVC insulated 1.5 Sqmm multi-strand copper conductor cable as earth wire and making good the disturbed surfaces with cement sand mortar 1:3 to match with the existing surfaces complete all as specified & directed by Engineer-in-charge |
| 89 | (a) One light point/Bell point controlled by one switch. |
| 90 | (b) One fan point controlled by one switch. |
| 91 | (c) One socket point controlled by one switch on same board. |
| 92 | (d) One socket point controlled by one switch on Independent board. |
| 93 | Description all as per item No 88 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet15 Amp independent board complete all as specified and directed by Engineer in charge . |
| 94 | S & F in replacement of bell ding dong AC 230 volts single pole one way complete all as specified and directed by Engineer in charge. |
| 95 | S & F in replacement of Switch piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge. |
| 96 | S & F in replacement of Socket outlet 3 pin, 5 Amps and AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 97 | S & F in replacement of switch socket combination 5 in 1 pin 5 and 16 Amps AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 98 | S & F in replacement ofr Ceiling rose surface bakelite 65 mm x50 mm three terminal AC 230 volts flush type complete all as specified and directed by Engineer in charge |
| 99 | S & F in replacement of fan regulator Step type of polycarbonate complete all as specified and directed by Engineer in charge. |
| 100 | Supply and fixing of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed by engr-in-charge. |
| 101 | Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATT made up of Polycarbonate , City-1 , Cylindrical shape , complete with fixing arrangements on wall all as specified and directed. Make:City 1 of havells or equivalent in bajaj ,philips |
| 102 | Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt not less than 120 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Secl), |
| 103 | S & F in replacement of LED Decorative /mirror light fitting diffuser 2 feet, 10 watt Min 120 lumens/watt 220 V along with fixture Surface mounted suitable for indoor aplication , connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. |
| 104 | S & F in replacement of Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. |
| 105 | Supply and fixing LED street light fitting 35 Watt Min 130 lumens/watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat , nuts and bolts and painting with aluminium paint. complete all as specified and as directed. complete all as specified & directed. |
| 106 | S & F in repair Sheet metal enclosure DBs Tripple Pole and Neutral 4- way with 200 Amps rated bus bar 415 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge |
| 107 | S & F MCB TPN 40 to 100 Amps, 415 Volts, minimum 10 KA, \\"C\\" series rupturing capacity and to be housed in DBs catered here in before complete all as specified and directed : |
| 108 | S & F in replacement of Sheet metal enclosure DBs Single Pole and Neutral 8 way with 200 Amps rated bus bar 240 volts single pole and neutral complete double door complete all as specified and directed by Engineer in charge |
| 109 | S & F for MCB Single pole and neutral rated capacity 40 to 63 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 110 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 111 | Supply & Fixing in replacement of single pole sheet metal enclosure modular type with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. |
| 112 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 113 | S & F in replacement of bell push piano flush type AC 230 volts 5 Amps single pole one way complete all as specified and directed by Engineer in charge. |
| 114 | Supply and fixing Single phase propeller type ventilating (Exhaust fan) plastic body AC 230 volts 300 mm sweep, plastic body complete with plastic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed..Make:Bajaj/Crompton/Havells. |
| 115 | Supply and fixing electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as required and as directed at site.Make:Bajaj/Crompton/Havells. |
| 116 | Supply and fix Electric chimney of size 60 cm,9 speed Max Suction 1280m3/hr LCD Touch Panel with auto cleaning including length of outlet Chimney Pipe as requirement ncluding making holes of suitable size and making good the disturbed surface and shutters including electric connection complete all as specified and as directed Please Enable Macros to View BoQ information |
| 117 | Supply and fix Electric chimney of size 60 cm,9 speed Max Suction 1280m3/hr LCD Touch Panel with auto cleaning including length of outlet Chimney Pipe as requirement ncluding making holes of suitable size and making good the disturbed surface and shutters including electric connection complete all as specified and as directed Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 9 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender