Tender For Supply Installation Testing and Commissioning of 125 Kva Dg Set With Cpcb Iv + (Central Pollution Control Board) 125 Kva Dg Set With Amf Panel Including 5-Years Camc At International Inoculation Centre And Ayush Polyclinic, Mandir Marg
Tender Value
Ref. Documents
Estimated cost
Bid Submission
02 Nov 2026
10 days left
EMD
58112
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Supply Installation Testing and Commissioning of 125 Kva Dg Set With Cpcb Iv + (Central Pollution Control Board) 125 Kva Dg Set With Amf Panel Including 5-Years Camc At International Inoculation Centre And Ayush Polyclinic, Mandir Marg
BOQ
| Sl. No. | Item Description |
| 1 | Sub-head ‘A’ Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket,bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 200 mm dia (OD-200 mm & ID-175 mm nominal) |
| 2 | Sub-head ‘B’ SITC of ‘Silent Type’ Diesel Generating set complying CPCB IV/IV + norms complied with Prime Power Rating of 125 KVA, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings: (a) Diesel Engine, (b) Engine mounted Instrument Panel fitted with and having digital display (c) Alternator (d) Base Frame & Foundation (e) Fuel Tank (f) Exhaust System (g) Starting System (h) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere as per specifications. (i) Fabricating, Installing, Testing & Commissioning of automatic mains failure control including auto by-pass panel, suitable for 125 KVA silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, KVARH & provision for overload, short circuit, restricted earth fault, under frequency, control cabling from AMF panel to diesel engine and elsewhere if required, all complete and inter locking including the following (j) On site/factory testing of DG Set at 100% load at unity power factor for 12 Hrs. and 110% load at UPF for 1 Hr i/c making arrangement for HSD oil, heating load etc as reqd. as per direction of Engineer-in charge. (Following (a) to (j) detail as Schedule of work) |
| 3 | Cable & Cable Laying Supply & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the RCC/ HUME/ METAL pipe as required. Along with end termination .Make : Polycab, Havells,Finolex, RR Kabel Cable 185 sq.mm. |
| 4 | Earthing : Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. with charcoal/ coke and salt as required. |
| 5 | Providing and fixing 25 mm X 5 mm G.I. Strip on surface or in recess for connections etc. as required. |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 7 | Exhaust piping: Supply and Fixing of exhaust pipeline made of B Class MS Pipe complete with insulation including Rockwool of 50 mm thickness with wire mesh and aluminium cladding including providing support structure with all hardware complete as required. |
| 8 | Sub-head ‘C’ AMC – Annual maintenance CAMC for complete DG set to upkeep the system working properly including 2 Nos. B-Checks with material per year complete as required . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender