Tender For Construction Of 300 Sqm Naturally Ventilated Poly House At Perka, Under Ae-I, Cd, Apwd, Car Nicobar.
Tender Value
14.19 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
5 days left
EMD
28398
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nicobars → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 300 Sqm Naturally Ventilated Poly House At Perka, Under Ae-I, Cd, Apwd, Car Nicobar.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil. |
| 3 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 5 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 6 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 7 | 1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 9 | Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 11 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 12 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 13 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 14 | Electric resistance or induction butt welded tubes |
| 15 | Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. |
| 16 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 17 | 110 mm diameter |
| 18 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion. |
| 19 | Coupler |
| 20 | 110 mm |
| 21 | Single tee without door |
| 22 | 110x110x110 mm |
| 23 | Bend 87.5° |
| 24 | 110 mm bend |
| 25 | 12 mm cement plaster of mix: |
| 26 | 1:4(1 cement: 4 fine sand) |
| 27 | Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: |
| 28 | Two or more coats on new work |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
| 30 | 20 mm nominal dia Pipes |
| 31 | 25 mm nominal dia Pipes |
| 32 | 40 mm nominal dia Pipes |
| 33 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 34 | Providing and laying hollow cement concrete blocks walling 200mm thick consisting hollow block of size 400mm x 200mm x 200mm of mix 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 10 mm nominal down size) having a crushing strength of 3.5 N/mm2 at 28 days as per I.S. 2185 (Part I) 1979 laid in cement mortar 1:6 (1 cement: 6 coarse sand) Complete. |
| 35 | Providing and fixing of U.V. Treated 40 Mesh Insect Proof Net of approved quality on all sides of the srtucture as per the requirement. |
| 36 | Providing and fixing 200-mocron UV-Stabilized anti fungal transparent LDPE polyfilm sheet of approved quality and make and fixing it on the roof with UV films as per requirements. |
| 37 | Providing and fixing of Aluminium lock channel (U-Profile), PVC coated zigzag spring of 2.2 mm thick with self drilling screw and fixing it on the roof with UV films as per requirements. |
| 38 | Providing, installing, testing and commissioning centrifugal irrigation pump of 1 HP motor pump at 45 m head with suitable motor with suction and dwlivery 25x25 m including PVC suction pipe with fittings. |
| 39 | Providing and installing of single phase 11A, 230 V, 50 HZ electric semi automated starter of approved make and model as per the requirement. |
| 40 | Providing and fixing HDPE superflow screen filter having capacity to flow 12 cum per hour including providing all necessary PVC/HDPE male/female threaded adapters, joints and sealants. |
| 41 | Providing and fixing adjustable/rotating PVC 28 LPH mini Nursery sprinkler head complete with connector, adaptor and fittings. |
| 42 | Providing and fixing anti-drip fogger/mist nozzle assembly having capacity 28 LPH complete with 4-way connector. |
| 43 | Providing and fixing 40 mm dia irrigation isolation MSP Ball valve of approved make and quality complete with fittings. |
| 44 | Providing and fixing CPVC Union of approved quality: |
| 45 | 20 mm nominal bore |
| 46 | 25 mm nominal bore |
| 47 | 40 mm nominal bore |
| 48 | Providing and laying 16 mm dia HDPE lateral pipe including connectors, jointing and testing complete. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender