Tender For Renovation & Interior Decoration Work In Gangotri Showroom At Varanasi
Tender Value
39.01 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
4 days left
EMD
39100
Bank guarantee accepted
Document Fee
1770
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation & Interior Decoration Work In Gangotri Showroom At Varanasi
BOQ
| Sl. No. | Item Description |
| 1 | CEILING & FLOORING WORK |
| 2 | Dismantling tiled roofing with battens, boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead |
| 3 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre,, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level of Galvanized Iron (GI) sections suspended from the slab, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame |
| 4 | LAMINATED WOODEN FLOORING |
| 5 | Providing and fixing of 10 mm thick Laminated wooden flooring Classification of Use 23/32 (Heavy Domestic/General Commercial) with a Surface Abrasion Resistance of class AC4 (average 4500 cycles), Impact Resistance of IC2 (EN13329), Resistance to Cigarette Burn with a rating of 5 (EN 438-2:15), Swelling after 24 hrs in water of 15% (EN13329), Modulus of Rupture of 53.3 newton/mm2, Internal Bond 1.78 newton/mm2, Surface Soundness of 1.3 newton/mm2 (EN 13329:2000) with a 0.2mm thick wear layer on top of a High Density Fiber substrate core (density > 850 Kg/M3) of plank size 1291 mm X 135 mm having Uni fit locking arrangement (lock strength > 1000 lbs/ft) with an underlayment made of natural colour foam , with accessories like End profile, Transition profile, reducer, etc. complete. The rate includes cost of all materials, accessories, labour, HOM, etc., complete at all levels. (The Shade, pattern etc., to be approved by Engineer in charge |
| 6 | DOOR-WINDOW WORK |
| 7 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).Second class teak wood |
| 8 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 9 | Providing & Fixing decorative laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.0 mm thick |
| 10 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square |
| 11 | Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete:150x125x27x5 mm |
| 12 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:250x10 mm |
| 13 | Providing and fixing bright finished brass handles with screws etc. complete:125 mm |
| 14 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 15 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with lSI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 16 | Mortice latch, lock with handle |
| 17 | Providing and fixing bright finished SS 100 mm mortice latch and lock with handle, ISI marked, with six levers and a pair of SS lever handles of approved quality with necessary screws etc. complete. |
| 18 | 6mm thick High Performance Toughened Glass |
| 19 | Providing and fixing 6mm thick High Performance Toughened Glass having properties of visible Light transmittance (VLT) 28%, ER 27%, IR 10 %, Solar Heat Gain Coefficient (SHGC) 0.30 and U-value 3.7 W/m2 degree-K etc. The performance values declared should be tested by third party as well. The thickness/ combination of the glass can vary as per the architects/consultants’ suggestions after checking structural stability of the finalized glass panel. |
| 20 | FINISHING WORK |
| 21 | 12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) |
| 22 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 23 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 24 | Polishing in high gloss/matt finish melamine clear polish on wood work in required color/wooden shade texture with following process in the sequence as detailed below:1. The surface to be polished is rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos.2. Applying two coats of sealer with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs.3. On drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface further smooth after this wet rubbing, then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. Filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface is further allowed to dry for 12 hrs.4. On this, 1st coat of melamine polish is applied with spray gun using melamine clear polish and melamine thinner in required proportion. This 1st coat is allowed to dry for 24 hrs then this dry surface is again fine wet rubbed smooth, which is further allowed to dry for 12 hrs. The final melamine polish is applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of Engineer-in-Charge. (Final coat to be done in 1 or 2 layers without gap of time.) |
| 25 | Billing Counter Providing and Fixing of Billing counter as per drawing with 4mm Veneer over 18 mm Ply water Proof. Plywood conforming to international formaldehyde emission standards) and post formed edges finished and duly Melamine/ PU polished with engraving on outer surface and inner surface finished with mica along with 633 thick Toughened Glass approved by the Architect, with mobile storage unit and wire management. |
| 26 | Display Rack (8Feet Wide)Providing and installing 8 Feet display racks fabricated out of 25 mm thick commercial plywood, including Perforated Screen Panel jali work, complete wooden boxing, finished with approved laminate on both sides, and incorporating provision for concealed lighting with necessary cut-outs, wiring space, and fixtures, fixed firmly in position using suitable hardware and accessories, all complete in all respects as per approved design, drawings, and directions of the Engineer-in-Charge |
| 27 | Display Rack (6'10\\" Feet Wide)Providing and installing 6'10\\" display racks fabricated out of 25 mm thick commercial plywood, including Perforated Screen Panel jali work, complete wooden boxing, finished with approved laminate on both sides, and incorporating provision for concealed lighting with necessary cut-outs, wiring space, and fixtures, fixed firmly in position using suitable hardware and accessories, all complete in all respects as per approved design, drawings, and directions of the Engineer-in-Charge |
| 28 | Display Rack (9'6\\" Feet Wide)Providing and installing 9'6\\" display racks fabricated out of 25 mm thick commercial plywood, including Perforated Screen Panel jali work, complete wooden boxing, finished with approved laminate on both sides, and incorporating provision for concealed lighting with necessary cut-outs, wiring space, and fixtures, fixed firmly in position using suitable hardware and accessories, all complete in all respects as per approved design, drawings, and directions of the Engineer-in-Charge |
| 29 | Storage RacksProviding & Fixing Storage Racks with Pannels & Drawers including all accessories of 35 mm thk block board and 4mm thk veneer(Century/Green Panel/Austin) on outer surface and 1.0mm Thk. Laminate on inner surface with a PU polishing design as per drawing and approval of architect in charge |
| 30 | Kurti Hanging RackProviding and installing Kurti Hanging racks fabricated out of 25 mm thick commercial plywood, complete wooden boxing, finished with approved laminate on both sides, and incorporating provision for concealed lighting with necessary cut-outs, wiring space, and fixtures, fixed firmly in position using suitable hardware and accessories, all complete in all respects as per approved design, drawings, and directions of the Engineer-in-Charge |
| 31 | Display For ArtifactsProviding and installing Display For Artifacts racks fabricated out of 25 mm thick commercial plywood, complete wooden boxing, finished with approved laminate on both sides, and incorporating provision for concealed lighting with necessary cut-outs, wiring space, and fixtures, fixed firmly in position using suitable hardware and accessories, all complete in all respects as per approved design, drawings, and directions of the Engineer-in-Charge |
| 32 | Canvas ArtworkArtwork Theme:The canvas artworks proposed for display at the Building will reflect a blend of corporate values, sustainability, innovation, and cultural heritage, creating an inspiring environment for faculty members, trainees, and visitors such as Sustainability & Green Energy, Innovation & Technology, People & Progress, National Pride & Legacy,Local Culture & Environment,Abstract Inspiration |
| 33 | [a] Canvas Sizes:Extra-large/custom sizes as per site requirements and approved layout. |
| 34 | [b] Medium of Artwork:Artwork shall be executed using the following techniques (either individually or in combination):Handmade Artwork on Canvas: Using professional-grade acrylic, oil paints, and spray paints with protective topcoat for durability. |
| 35 | [c] Material Specifications:Canvas: 100% cotton/polycotton, minimum 350 GSM, pre-primed for painting/printing.Frames: Seasoned hardwood/MDF stretcher frames with anti-termite treatment.Paints: Artist-grade acrylic, oil, or spray paints (UV-resistant, fade-proof, lead-free).Printing: High-definition (minimum 1440 DPI) with fade-resistant, weather-proof inks.Finishing: Protective matte/UV-resistant varnish or laminate to enhance life and prevent damage. |
| 36 | [d] Installation:Artwork to be mounted on stretcher frames or framed with protective glass/acrylic as per site design.Fixing to be done with concealed fasteners to ensure safety in public areas.Installation shall be carried out under the supervision of the Engineer/Architect in charge. |
| 37 | [e] Quality & Durability:All materials to be of premium quality, ensuring long life and colorfastness.Artwork must be resistant to dust, moisture, and UV light, suitable for long-term airport display.Handmade works to be sealed with protective coats to avoid cracking or fading |
| 38 | [f] Approval & Mock-ups:Contractor/Artist to submit concept sketches/digital previews for approval before execution. |
| 39 | ODOP Map (70 Districts) Signages Providing & Fixing the ODOP Signage is made of 3D channel letter, made from FollowingA) Front :- Front is to be made of 3.5 mm Acrylic and 3M/Avery/LG Cast vinyl of desired shade as per approval. Dual color vinyl film in desired day shade to be of cast acrylic base without printing the face of vinyl.B) Side :- Signage made of CNC channel bending machine made of exturded alloy 6063 thickness of 1.00mm confirming to BS 1474-1987 .80 to 125 mm as side of 3D letter exturded alloy profile with front edge and border with provisioning of housing front Acrylic inside . Back of the extrusion must be provided with built in weather proof layer to prevent dust , moisture etc. Alloy to be anodize to 18 to 20 microns in champagne/ brown/ silver colour of approval shades.C) Illumination :- Signage is to be illuminated with LED module of OSRAM (with required OSRAM power supplies) with 5 years warranty . D) Back :- Back is to be made of 4mm thick ACP with 0.5 mm thickness Aluminum Foil on both sides.E) Timer:- Auto operated using L&T/Havells/schneider timer of required capacity. |
| 40 | GENERAL INSTRUCTION SIGNAGES / AREA IDENTIFICATION SIGNAGESProviding & Fixing the Signage to be made of stainless steel sheet of 1 mm thick 304 grade brush finish including engraving/etching of letters of required size filled with colour as desired by engineer,fixing with ss screws on walls.signages to be bilingual/trilingual language. |
| 41 | SideTable Size: 600Wx600Dx470H mm.Providing & Fixing the SideTable Size: 600Wx600Dx470H mm.Exotic Oak veneer tabletop wraps premium engineered wood.Veneer tabletop showcases herringbone pattern, handcrafted by skilled Marquetry artisansMatte Dark Oak finish accentuates the unique grains & pattern of the veneer.2 feet long tabletop makes it a statement piece.Wooden tapered legs complement the modern design.Premium PU polish ensures longevity and lends a smooth finish.High-quality polish with low chemical emission ensures healthy indoor air for your family.Smooth finished edges eliminate moisture seepage, prevent warping and make it last longer.10mm high buffers offer ground clearance for easy cleaning. |
| 42 | Fix cantilever chair Providing & Fixing the Model: Jewel, Premium Leatherette Chair, Low Backfix cantilever chair* all over size is : 470mm(l)x 400mm(d)x 890mm(h) ,*the chair made of full leatherette in black colour .it will comes in matte finsih in contemporary style .details :* arms : with out arms.* use of ply: seat & back plywood made of 12 mm hot pressed.* seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , * back : 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in back . backrest support foam design based on symmetrical lumbar support seat height is @ 490mm .* base : four chrome legs .The Seller / Company should be ISO9001:2008, ISO 9001:2015, ISO 14001:2015, OHSAS 18001:2007, SEFA, Green pro, Indian Design Mark, AIOTA, FSC & SEDEX Certified |
| 43 | Back mesh chair Supplying and placing in position of Marvel/MB/Premium : medium back mesh chair in black colour with matte finish . The medium back 360° degre revolving chair with all over size is : W) 595mm X (D) 670mm X (H) 1125mm , the chair made of full mesh in black colour . It will comes in matte finsih about style type is modren. Arms : amrest is having two adjustment heights (up & down) . Use of ply: 12 mm thick hot pressed bwr plywood (is grade - 303 for seat). Seat: 40 ± 2 mm thick polyurethane foam with density 32 (±3) kg per cu meter for best quality cushioning in seat , Back : frame of design shall be curved made of two pieces injection moulded frame cover with mesh .backrest support adjustable lumbar support. Mechanism : self weighted multi locking mechanism . Only seat size is 500mm(l)x 500mm(d)x 540-440mm(h) & the back size is 480mm(l)x 815mm(h) , seat maximum height is 540mm & minimum height is 440mm & back height from floor maximum height is 1350mm & minimum height is 1250mm . Gas lift 100 mm telescopic haudraulic ; base : 650 mm chrome prong base is 620mm pitch center dia (660mm with castors) . |
| 44 | 30 L DustbinProviding and placing 30 litre capacity stainless steel dustbin of approved make and design, fabricated from corrosion-resistant stainless steel with smooth finished surface, complete with suitable lid (open/pedal/swing type as specified), fixed or placed at the designated location, including all necessary fittings and accessories, complete in all respects as per the instructions of the Engineer-in-Charge. |
| 45 | Indoor Plant With PotProviding and placing healthy Areca Palm plant of minimum 4 feet height, well grown and free from pests and diseases, planted in suitable size decorative pot with good quality soil, manure and drainage arrangement, including watering and initial maintenance, complete in all respects as per the instructions of the Engineer-in-Charge. |
| 46 | WATER COOLERSSupplying, installing and fixing Water Cooler of capacity 150 Liters with all its accessories, piping etc. |
| 47 | Electrification Work : |
| 48 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 49 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B |
| 50 | Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. |
| 51 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. |
| 52 | [a] 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 53 | [b] 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 54 | [c] 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 55 | [d] 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 56 | [e] 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 57 | [f] 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 58 | [g] 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 59 | Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.1 Pair |
| 60 | Supplying and drawing Co axial TV cable, RG-6 grade, 0.7 mm solid copper conductor, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required. |
| 61 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 62 | [a] 20 mm |
| 63 | [b] 25 mm |
| 64 | [c] 32 mm |
| 65 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 66 | [a] 5/6 A switch |
| 67 | [b] 2 way 5/6 A switch |
| 68 | [c] 3 pin 5/6 A socket outlet |
| 69 | [d] Telephone socket outlet |
| 70 | [e] TV antenna socket outlet |
| 71 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 72 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.1 or 2 Module (75mmX75mm) |
| 73 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.1 or 2 Module |
| 74 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 75 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 76 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 77 | Installation, Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required. |
| 78 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep |
| 79 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 1 run of cable |
| 80 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required. (for A.C. Point/MCB Point) |
| 81 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 30 KA,FPMCCB |
| 82 | Supplying and fixing following way, single pole and neutral (SPN), sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door |
| 83 | Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door |
| 84 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)4 way (4 + 12), Double door |
| 85 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 86 | [a] Single pole |
| 87 | [b] Double pole |
| 88 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 89 | Supplying and fixing following rating, four pole (FP), 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 90 | ELCB/RCCB Switches : |
| 91 | Supplying and fixing following rating, double pole, (single phase and neutral) SPN, 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 A |
| 92 | Supplying and fixing following rating, four pole, (three phase and neutral) SPN, 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 A |
| 93 | Cable Tray : |
| 94 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.100 mm width X 50 mm depth X 1.6 mm thickness |
| 95 | Earthing Work : |
| 96 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 97 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 98 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 99 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 100 | Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm |
| 101 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.40 mm dia |
| 102 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 103 | Providing and installation Aesthetically designed LED track light lumianire Track Light Cylindro 25W 4000K equiped with aluminium die-cast housing.(Make : Philips/Havells/Panasonic) |
| 104 | Providing and installation Aesthetically designed LED track Pendant light 15 W 4000K downlight with white /black powder coated polycarbonate housing and equiped with aluminium die-cast housing.(Make : Philips/Havells/Panasonic) |
| 105 | Recess Mounting Glareless Adjustable Type Circular LED Luminaire 18W 6000K with die-cast aluminum housing in white electrophoresis finish, specially designed heat sink and separate energy efficient electronic driver.(Make : Philips/Havells/Panasonic) |
| 106 | Providing and Installation of warm white Cove Lights and strip lights (5 Mtr).(Make : Philips/Havells/Panasonic) |
| 107 | Supply and fixing of recess/surface mounting round 9W LED Cut out Min 125 mm, Height Min. 40mm, LED Down lighiter having powder coated die cast aluminium housing with heat shink, diffuser/reflector and driver set. 1100-1650 system lumens, 1101m/W, PF>0.95, THD<10% at full load, CRI>80.(Make : Philips/Havells/Panasonic) |
| 108 | Track Lights Accessories -2MTR Track + Connector |
| 109 | Supply and fixing of 63 Amp. TP MCB (10 KA) C Curve. CAT A |
| 110 | Supply and Fixing of shock treatment chart.prescribed as per I.E. Rules.duly framed with glass and supported from back with hard board or shoft board with supply of all material ,labour,T&P for proper completion of work. |
| 111 | Supply and fixing of Three phase multifunctional electronic energy meter 10 to 60 Amp. Capacity fitted in intergral box on wall complete in all respect. |
| 112 | Supply & fixing of 400mm sweep wall mounted (Light Duty) fan complete with Plastic Blade & Pull Cord (Adjustable upward and downward tilt mechanism /motor /capacitor etc.) Oscillation degree - 90, Power consumption : 60 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 1350 RPM. Complete in all respect. |
| 113 | Supply & fixing of 225/230mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Copper motor for high air suction performance /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 45 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Motor type : Normal Speed. Complete in all respect. |
| 114 | Supply & fixing of 300mm sweep ventilating (Medium Heavy Duty) exhaust fan complete with Metallic Blade (Steel bird guard protector /Double ball bearing /Copper motor /Capacitor etc.), Noise level : (45 - 50) dB, Power consumption : 70/85 W, Rated voltage : 230 V, Rated frequency : 50 Hz, Speed : 900/1400 RPM. Complete in all respect. |
| 115 | Supply & Fixing of LAN socket outlet modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. Complete in all respect. |
| 116 | Providing & Installing The 43-inch LED Digital Signage A-Frame Standee shall feature a high-definition LED display with a diagonal screen size of 43 inches, designed for high-impact branding and promotional visibility. The unit must provide a wide viewing angle of 178°/178° (H/V) to ensure content remains clear and color-accurate from multiple perspectives. For seamless operation, the standee shall be powered by an Android operating system and include at least 2GB of internal RAM for smooth multimedia playback of video and images. The hardware shall be housed in a robust, portable A-type frame with overall physical dimensions of 61 x 140 x 10 cm (L x H x W) [User Query]. This signage solution must be Made in India, supporting local manufacturing standards, and is ideal for retail environments, exhibitions, and public spaces |
| 117 | CCTV System : |
| 118 | SITC of 2 MP Dome Camera, 1/2.8\\" Progressive CMOS, ICR, 1920x1080: 25fps(P) / 30fps(N), H.265+/ H265/ H.264+ & H.264, 3D DNR, BLC, IR range: up to 30m, DC12V & PoE, Support mobile monitoring |
| 119 | SITC of 2 MP Bullet Camera 1/2.8\\" Progressive CMOS, ICR, 1920x1080: 25fps(P) / 30fps(N), 2.8mm/F2.0 lens (4/6mm optional), H.265+/H265/H.264+ & H.264, IP67, DWDR, 3D DNR, BLC, IR range: up to 30m, DC12V & PoE,Support mobile monitoring |
| 120 | Supply, Installation, Testing & Commissioning of 8 Channel Network Video Recorder with specifications as follow: Supported Image Format H.264+/H.264, H.265+/H.265, MPEG-4, JPEG, M-JPEG; Supported Image Resolution 1920x1080, 1,280 x 960, 960 x 720, 640 x 480, 320 x 240; Maximum Number of Cameras 4; RAID 5, 320MBps incoming bandwidth Camera Control Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256), Auto mode GUI REC/Playback Control REC, PLAY, Rev PLAY, Pause; Network Interface Camera port: 10Base-T / 100Base-TX Min 1x 2TB can be installed. Certification: UL, CE, BIS, FCC. |
| 121 | PVC Box for Camera |
| 122 | RJ45 Connector Box( 100PC) |
| 123 | 2U Rack with complete accessories. |
| 124 | D-Link 1 MTR Patch Cord |
| 125 | 2 TB Survillance Hard Disk |
| 126 | Supply and laying of CAT 6 UTP cable |
| 127 | Supply and laying of 25mm dia PVC conduit including accessories. |
| 128 | Supply and laying of 3 core 1.5 sqmm copper unarmoured cable |
| 129 | SITC of 32\\" flat screen FHD professional LED suitable for 24x7 operation with remote control and wall mount unit/floor stand complete with making connection etc as per list of approved makes. |
| 130 | Supply, installation and testing of UPS 1 KVA capacity. |
| 131 | OTHER WORK ESTIMATE |
| 132 | Supply, installation, testing and commissioning of Workstation Tower with following Specs: Type: Workstation Tower, Processor: Intel Core i7 or higher, Memory: 16GB, Harddisk: 1 TB (for example Western Digital Green/Red) 2, Network card: Gigabit speed, Graphic Card: Onboard graphics adapter (for example Intel 4600HD), or Mid range graphics card (for example GeForce GTX 1050, AMD Radeon, Radeon R7 450), Graphic Card: Recommended software environment: Windows 11 Professional (64 bit) or higher Windows Server 2012 R2 or 2016 or higher, Microsoft SQL Server 2012, SQL Server 2014, SQL Server 2016 (Express, Standard or Enterprise) or higher. Anti-virus software- shall be provided (and suitably renewed during DLP and AICMC period). |
| 133 | Colour Monitor 21\\" : To display high resolution 3D graphics, all operator workstations shall have colour monitors with Full HD screens. |
| 134 | Colour Printers A4 : Print, Scan & Copy, Wireless LAN, Direct Wireless, Colour & B/W print suitable for A4 70-75 GSM Paper, 150 to 1500 Per Volume, Duty Cycle (Monthly, Letter) upto 5000 Pages, Make : HP, Brother, Canon etc. |
| 135 | Barcode Scanner & Printer, Handheld laser barcode scanner, Extra-long read range for easy scanning, Support for everyday 1D bar codes, including high-density, With multiple interfaces, a universal cable (Having at least USB interface), User Indicators Direct decode indicator, good decode LEDs, beeper (adjustable tone/volume), Standard 2.0M straight, Scanning Technology Code 39, Code 128 compatible. |
| 136 | Supply, installation, testing and commissioning of DFMD Multizone metal detector to detect any metal that may be hidden on the person passing through this door. It should be a walkthrough Metal detector that should be designed and manufacture using high quality raw material and advanced technology. |
| 137 | Supply, installation, testing and commissioning of HHMD to detect any concealed metal items, weapons & electronic equipment that may be hidden on the person passing through |
| 138 | Fire Detection & Alarm System : |
| 139 | Supplying, installation, testing & commissioning of heat detector operating at 54ºC/57ºC with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required. |
| 140 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 141 | Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 142 | Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required. |
| 143 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 144 | Fire Alarm Panel with Talk Back Syetm Arrangements : |
| 145 | Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.06 Zone panel for fire alarm system. |
| 146 | [a] 100 Watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required - 1 No. |
| 147 | [b] Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit -1 Set. |
| 148 | [c] Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc. complete as required -1 Set. |
| 149 | [d] Amplifier change over switch for inter changing amplifier -1 No. Monitor panel for loudspeaker complete with output selector, ON/OFF switch, fuse, visual indications etc. complete as required- 1 No. |
| 150 | [e] Gooseneck microphone with stand and ON/OFF switch- 1 No. Main ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters, terminal blocks etc. complete as required -1 Set. |
| 151 | [f] Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt, 30 AH Each sealed maintenance free batteries -1 Set. |
| 152 | Supplying & laying of 2x1.5 Sqmtm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 153 | Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. |
| 154 | FIRE-FIGHTING WORKS |
| 155 | FIRE ESTINGUISHERS:-CO2 gas type. 4.5 kg. capacitySupply & erection of ISI marked portable fire extinguishers, confirming to IS:15683, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions of Engineer-in-charge.CO2 gas type. 4.5 kg. capacity |
| 156 | FIRE ESTINGUISHERS:-ABC dry powder Type 6 kg. capacity Supply & erection of ISI marked portable fire extinguishers, confirming to IS:15683, wall mounted type, wall brackets complete in all respect as per standard item with all accessories, delivery hose & nozzle whereever required, including fixing on walls as per the directions of Engineer-in-charge.ABC dry powder Type 6 kg. capacity |
| 157 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : |
| 158 | [a] 25 mm dia |
| 159 | [b] 32 mm dia |
| 160 | [c] 40 mm dia |
| 161 | [d] 50 mm dia |
| 162 | Providing, fixing, testing & commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories.Pendent Sprinkler |
| 163 | Less 5% due to Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender