Tender For Provision Of Certain E/M And B/R Work Services And Provision Of Certain Sanctioned Works At Site S And R At Af Stn Under Ge Af Thane
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
18 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thane → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provision Of Certain E/M And B/R Work Services And Provision Of Certain Sanctioned Works At Site S And R At Af Stn Under Ge Af Thane
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep in hard /dense soil and getting out complete all as specified and directed by Engr-in-Charge. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth in hard/dense soil for foundation and getting out complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition of cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 4 | M & L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregates as in foundation filling, mass concrete complete all as specified and directed by Engr-in-Charge. |
| 5 | M & L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded crushed stone agg as in flooring complete all as specified and directed by Engr-in-Charge. |
| 6 | M & L for 75 mm thick PCC 1:2:4 type B2 using 40 mm graded crushed stone agg as in flooring to receive the tiles complete all as specified and as directed by Engr-in-charge |
| 7 | M & L for proving RCC design mix M30 in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-Charge. |
| 8 | M & L for proving RCC design mix M30 in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed by Engr-in-Charge. |
| 9 | M & L for providing RCC design Mix M30 as in Columns, pillars, piers, posts and struts complete all as specified and directed by Engr-in-Charge. |
| 10 | M & L for providing RCC design Mix M 30 as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses in water retaining structures complete all as specified and directed by Engr-in-Charge. |
| 11 | M & L for providing RCC design Mix M 30 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete for water retaining structures complete all as specified and directed by Engr-in-Charge. |
| 12 | M & L for providing RCC design Mix M 30 in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 13 | Use and waste of formwork to rough finished flat faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed by Engr-in-Charge. |
| 14 | Use and waste of formwork to rough finished flat sides of pillars, posts, struts, piers, columns and stanchions rectangular of polygonal in plan for rough finished surface of concrete complete all as specified and directed by Engr-in-Charge. |
| 15 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed by Engr-in-Charge. |
| 16 | M & L for use and waste of formwork to flat sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) foundation and plinth beams; and similar work; vertical or to batter,fair finished complete all as specified and directed by Engr-in-Charge. |
| 17 | M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick all as specified and directed by Engr-in-Charge. |
| 18 | S&F aluminium anodized grill of 4.75 x 7.75 mm, size of opening 10cm, size of mesh RG 103 (as per royal grill) with aluminium channel `F' angle 20mmx15mm fixed to aluminium frame work completed all as specified and directed by Engr-in-Charge. |
| 19 | S&F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge. |
| 20 | S&F aluminium anodized barrel tower bolt extruded section and fixed 150mm long complete all as specified and directed by Engr-in-Charge. |
| 21 | S&F extruded aluminium alloy handles 100mm fabricated type, anodised complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F in repair Bands, straps,supports or stays for rainwater pipes, hold fasts etc complete all as specified and conforming to Fe-290 Gde-E-165 etc complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L for rendering 10mm thick (1:6) cement plaster on fair faces of brick work or concrete surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 24 | M & L for rendering 15 mm thick in cement mortar 1:4 (10 mm thick backing coat and 5 mm thick finishing coat) on fair faces of brick work or concrete surfaces including finished even and smooth without using extra cement with using water proofing compound (water proofing compound shall be measured and paid seperately) complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L preparation of newly plasterd surface of walls and applying two coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L preparation of newly plasterd surface of concrete or brick surfaces of two coat of distemper oil emulsion over a coat of primer complete all as specified and directed by Engr-in-Charge. |
| 27 | S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F TMT Mild steel bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 29 | M&L Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings all as specified and directed by Engr-in-Charge. |
| 30 | S&F Figured glass 4.00 mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for Pre-cast cement concrete block masonry type C1 (1:3:6) (20 mm graded aggregate) set in 1:4 Cement mortar with solid blocks, exc. 10cm in width and setting in mortar, all as specified and directed by Engr-in-Charge. |
| 33 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for Preparing new plastered surfaces, wall over a coat of weather coat primer and applying two coats of acrylic paint exterior complete all as specified and directed by Engr-in-Charge. |
| 35 | S&F IInd class hard wood plain, solid, straight chowkat and frame wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F for 35mm thick IInd class HW rail and style plain framed panelled factory made shutter (Two panel) with lock rail and panel of 9mm BWP,commercial ply or 12mm veneered particle beard with commercial veneering on both faces. The size of rail and stile as per IS :1003 (Part-I) kiln and chemically pressure treated complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F 35mm thick IInd class hard wood glazed and skeleton shutters divided into squares with plain chamfered or reounded miltred and related sash bars number to received glass gauze etc edges of framing plain chamfered or reounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I section 8 clause 8.20(a) supplied and fitted to chawkats complete all as specified and directed by Engr-in-Charge. |
| 38 | M & L for cutting holes in brick walls exc half bricks but nexc one brick built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cm (1:3) or cement concrete (1:2:4) type B1 as required all as specified and directed by Engr-in-Charge. |
| 39 | Supply only Liquid water proofing compound ( Brand: Dr Fixit or equivalent) complete all as specified and directed by Engr-in-Charge. |
| 40 | S&F but hinges stainless steel 100mm long complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for preparation of new wood surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and directed by Engr-in-Charge. |
| 42 | S & F Rotational moulded polyethylene water storage tanks 1000 L capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge. |
| 43 | S & F Rotational moulded polyethylene water storage tanks 500 L capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge. |
| 44 | S&F Gun-metal, globe or gate valves,bore dia of pipe in 25 mm, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 45 | S&F Ball valves 20 mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F tubes medium grade 15mm (concealed in wall/floor) galvanized with all fittings and fixed complete wall and celings or laid in floors , for the following bore of tubes complete all as specified and directed by Engr-in-Charge. |
| 47 | S&F tubes medium grade 20mm, galvanized with all fittings and fixed complete to wall and celings or laid in floorsm (concealed) , for the following bore of tubes complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F tubes medium grade 25 mm, galvanized with all fittings and fixed complete to wall and celings or laid in floors , for the following bore of tubes complete all as specified and directed by Engr-in-Charge. |
| 49 | S&F PVC (SWR) pipes, 110 mm dia ,single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F 40 mm high density polyethylene pipe (HDPE) of pressure rating 6 kg/cu cm fixed to walls ceiling or in floor complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with ruber ring joints fixed to wall complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F PVC (SWR) bends 110mm bore in mm any radius with access door complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F PVC (SWR) bend 75mm bore any redious with access door complete all as specified and directed by Engr-in-Charge. |
| 54 | S&F PVC (SWR) 110mm bore WC connector with lip type ring complete all as specified and directed by Engr-in-Charge. |
| 55 | S&F PVC (SWR) 75mm diameter out let in mm floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 56 | S&F PVC (SWR) 110mm bore in mm vent cowl complete all as specified and directed by Engr-in-Charge. |
| 57 | S&F PVC(SWR) 75mm bore in mm vent cowl complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F stainless steel soap dish including all fixtures and fasteners for fixing to the wall etc complete all as specified and directed by Engr-in-Charge. |
| 59 | M&L Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in CM 1:3 Completecomplete all as specified and directed by Engr-in-Charge. |
| 60 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 25 mm screed bed in C:M 1:4 complete all as specified and directed by Engr-in-Charge. |
| 61 | M&L Non skid ceramic coloured tile 7 to 8 mm thick area of each tile exc 0.06 sqm but not exceeding 0.11 sqm in floor set and jointed in neat cement slurry and point in white or coloured cement to match colored tile over 15 mm screed in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F sink with drain board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 3330mm x 160mm complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F 15mm Stop valves, fancy type, chromium plated cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete complete all as specified and directed by Engr-in-Charge. |
| 66 | Cutting in existing 25 or 32 mm steel tubing for alterations or additions in any position without taking down (Each cut measured) complete all as specified and directed by Engr-in-Charge. |
| 67 | Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, (excl flushing cistern or flush pipe) complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in PVC High/Low level flushing cistern 10 litrescapacity including all fittings i.e float valve, syphon, flushpipe,brackets and flush pipes to pedestal pan, including all joints complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP wastes and other fittings complete all as specified and directed by Engr-in-Charge. |
| 70 | S & F bib taps CP Brass fancy type long shank with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule 15mm dia complete all as specified and directed by Engr-in-Charge. |
| 71 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F Grating doom 10mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed by Engr-in-Charge. |
| 73 | S & F PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F aluminium anodized barrel tower bolt extruded section and fixed 200mm long complete all as specified and directed by Engr-in-Charge. |
| 75 | Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed chromium plate fancy type complete all as specified and directed by Engr-in-Charge. |
| 78 | M&L 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup complete all as specified and directed complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in Chromium plated shower roses 125mm size with or without swivel joints, including fixing to steel pipe or union complete complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 81 | M & L for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 82 | M & L for Pre-painted galvatume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F Steel work in tubular trusses (round/rectangular/square shape of pipes as approved by Engr-in-Charge) complete etc using ERW or induction butt weld M.S tube black conforming to IS 1161-1979 grade Yst 240 as in purlin, rafter, pole including special shaped, washers, fabrication and election complete all as specified and directed by Engr-in-Charge. |
| 84 | S&F for framed work as in plates (plain or chequred) channels, square cut or notched with fabrication and erection of FE 410-W (Gde E-250) auality A (ordinary and counter sunk) forming holes without any attachment complete all as specified and directed by Engr-in-Charge. |
| 85 | M&L , for preparation of new steel surface & applying two coats of synthetic enamel paint over a coat of red oxide over 10cm in width or girth, not otherwise described complete all as specified and directed by Engr-in-Charge. |
| 86 | M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 87 | M & L for 60 mm thick machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 ,M-35 Grade complete all as specified and directed by Engr-in-Charge. |
| 88 | M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 89 | M & L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge. |
| 90 | M & L for 75 mm thick cement concrete type C-2, 1:3:6 (using 20 mm graded crushed stone aggregates) as in plinth protection complete all as specified and directed by Engr-in-Charge. |
| 91 | M&L for broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge. |
| 92 | M & L brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L for cement Concrete bed to drain pipes of 150 mm bore including packing under and completely surronding pipes after they are laid and tested in cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) complete all as specified and directed by Engr-in-Charge. |
| 94 | M&L for Salt glazed stone ware drain pipes 150 mm bore grade 'A', laid in trenches and jointed in cement mortar 1:1 or with collars complete all as specified and directed by Engr-in-Charge. |
| 95 | M&L for Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles with semi perforated and 12mm thick having Size 595 x 595 mm of approved texture, 12mm thick thick micro tegular design and patterns having moisture micro tegular edged or 10 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawings complete all as specified and directed by Engr-in-Charge. |
| 96 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge. |
| 97 | Removing excavated soil exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed by Engr-in-Charge. |
| 98 | Material and labour for point wiring complete with 1.5 Sqmm (nominal cross section area) FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 volts drawn through and including concealed PVC rigid conduit medium grade, pipe hooks, elbows, junction covers and junction boxes terminated in existing modular steel terminal boxes made out of 1.6mm thick MS sheet concealed in walls including cutting chases in walls for conduits and making good disturbed surfaces of wall in CM 1:3 for mounting switches, sockets, fan regulator, covered with including 3mm thick bakelite plastic laminated sheet top cover fixed flush with wall using brass screws & cup washers including 1.5 Sqmm PVC insulated solid copper conductor wire as earth continuity to common earth and connecting to earth dully for following points controlled by one switch complete all as specified and directed by Engineer-in-Charge complete all as specified and directed by Engr-in-Charge. |
| 99 | One light point control by one switch complete all as specified and directed by Engr-in-Charge. |
| 100 | One ceiling / exhaust fan point control by one switch complete all as specified and directed by Engr-in-Charge. |
| 101 | All as per item No. 98 here-in-before but for one five pins 5 Amps switch socket outlet point on same board complete all as specified and directed by Engr-in-Charge. |
| 102 | All as per item No. 98 here-in-before but for one 3 pin socket outlet 6 Amp on the independent board complete all as specified and directed by Engr-in-Charge. |
| 103 | Material and labour for point wiring with 2.5 Sqmm (nominal area) PVC insulated unsheathed stranded copper conductor FRLSH cable 1100 volt grade (ISI marked) drawing into and including non-metallic rigid PVC concealed conduit (medium quality ISI marked) with all fittings such as tee/bends etcterminated in new MS box and fixing new bakelite sheet as top cover and including 2.5 Sqmm single core PVC insulated copper conductor solid earth wire to common earth and connected to earth dully for one power point independent complete all as specified and directed Engineer-in-Charge. |
| 104 | S&F Switch Modular 6 Amp, Flush type, Single Pole, 1-way complete all as specified and directed by Engr-in-Charge. |
| 105 | Supply and Fix switch socket combination modular 2 in 1,6 pin, 5/15Amps flush type 240 V complete all as specified and directed by Engr-in-Charge. |
| 106 | S&F Socket Outlet 6 Amp,modular, Flush type, 2-in-1, multi-purpose, 5 Pin complete all as specified and directed by Engr-in-Charge. |
| 107 | Supply and Fix modular switch socket combination 2 in 1,5 pin, 5 Amps flush type 240 V complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F Ceiling Rose, 3 Terminals, PVC Polycarbonate, Isolated body complete all as specified and directed by Engr-in-Charge. |
| 109 | S&F flush mounting factory made SPN DB 8 way, 240 Volt, Double door, IP-43 protection, IK-09 with metal door with 100 Amps copper bus bar, with neutral bar, earth bar and cables ties for cable management fully insulated bus bar complete all as specified and directed by Engr-in-Charge. |
| 110 | S&F MCB 6 to 32 Amps, Single Pole 240 Volts, 10 KA, ‘C’ Curve complete all as specified and directed by Engr-in-Charge. |
| 111 | S&F MCB, Single Pole & neutral, 40 Amps 'C' Curve having breaking capacity 10 KA complete all as specified and directed by Engr-in-Charge. |
| 112 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with squirrel cage induction moter complete all as specified and directed by Engr-in-Charge. |
| 113 | Supply and fix exhaust fan, steel body AC single phase, 230V of size 300mm sweep with blades and frame and louvers complete all as specified and directed by Engr-in-Charge. |
| 114 | Supply and Fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-In-Charge. |
| 115 | Supply and Fix LED lights fitting mirror type with out put diffuser 2 feet, 10W 220V, AC decorative type with driver, holder including LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-In-Charge. |
| 116 | Supply and Fix LED luminaire 600mm x 600mm, 35/36 watt, 220V, AC recessed type with high effciency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-In-Charge. |
| 117 | M&L Sub-main Wiring with 2-Runs of 4 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable and 1-Run of 4 Sqmm (nominal area) 1100 Volt, PVC insulated unsheathed FRLS multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuty along with the Wiring drawn in CONDUIT/PVC CASING & CAPING, complete all as specified and directed by Engr-In-Charge. Note : (i) Three length of wire along with conduit will be measured as one Length. |
| 118 | S&F LED street light fitting 35 Watt 230v AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-In-Charge. |
| 119 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size16 sq mm 2 core complete all as specified and directed by Engr-In-Charge. |
| 120 | Supply and fix prestressed concrete pole, 9.0 metres long, 102mm x 152mm at top and 102mm x 289mm at bottom, class 10, including foundation and coping complete all as specified and directed by Engr-In-Charge. |
| 121 | Supply and fixing Supply and fixing LED street light fitting 90 Wat 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and directed by Engr-In-Charge. |
| 122 | S & F Junction box with fuse provision and suitable connection for three phase incomming cable 3 phase out going cable and single phase connection for light fitting with controlled MCB SP-6 Amps -01 Nos enclosed in thermo plastic in closed shock froof safe complete all as specified and directed by Engr-In-Charge. |
| 123 | M & L security light bracket made with GI pipe 40 mm dia light grade minimum length 1.5 mtr long with 105 degree angle including necessary MS clamp made with 25 x 6 mm and suitable MS sstuds and bolt duly painted with two coats of aluminium paint over a coat of red oxide complete all as specified and directed by Engr-In-Charge. |
| 124 | Excavation in trenches exceeding 1.5 m wide and not exceeding 3.0 m deep for foundation for poles, and getting out in soft/loose soil complete all as specified and directed by Engr-In-Charge. |
| 125 | Sand cushioning for cable protection by spreading in trenches crushed stone sand by gently punning down manually complete all as specified and directed by Engr-In-Charge. Note:- Punnned thickness shall only be measured and paid. |
| 126 | Supply and laying un reinforced precast concrete cable cover class Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specified and directed by Engr-In-Charge. |
| 127 | Supply and fix GI pipe 40 mm dia light grade complete with all fitting for cable protection and support complete all as specified and directed by Engr-In-Charge. |
| 128 | M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in foundation of stay assembly, poles, struts etc complete all as specified and directed by Engr-In-Charge. |
| 129 | M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in foundation of stay assembly, poles, struts etc complete all as specified and directed by Engr-In-Charge. |
| 130 | Supply & laying Steel Water Tubing 50 mm bore (dia), Galvanised, ‘medium grade’ with all Fittings laid in Trenches or laid in Concealed in Walls or any other situation complete all as specified and directed by Engr-In-Charge. |
| 131 | Supply & fix 50 mm bore (dia), Gun metal glove or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-In-Charge. |
| 132 | Disconnecting/ dismantiling carefully existing serviceable ceiling fans and deposited to MES store and refixing / Hanging the same at the site after completion of civil works complete and giving electric connection, testing after installation complete all as specified and directed by Engr-In-Charge. |
| 133 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated unsheathed cable HFFR/ZHFR (Zero Halogen Fire Retardant), 1100 volt grade with multi stranded copper conductor drawn through and including medium grade, ISI marked PVC casing caping of not less than 25 mm width with accessories fixed on wall / ceilling surface and including provision of 1.50 Sqmm single core PVC insulated unsheathed cable HRRR/ZHFR, 1100 volt grade with multi stranded copper conductor green colour as earthcontinuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139 (pt-I) of 1969 and IS : 14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provison of new 3 mm thick plastic laminated sheet top cover for housing the switches socket outlets, etc . with brass screws and brass washers and making good the distrubed surfaces as per existing for one Elight point controlled by one switch including taking down. disconnecting / dismandinling of old point wiring and deposited to MES store com complete all as specified and directed by Engr-in-Charge. |
| 134 | S & F in recessed mounted LED light fitting of 2' x 2' size suitable for false ceiling 34/36 watt, 5700K white light, metal body with white colour outer finish and acrylic diffuser including LED driver / Transformer spring loaded clips for easy mounting and making all electric connections including disconnection / dismantling of existing Tubelights and deposited to MES Store complete all as specified and directed by Engr-in-Charge. |
| 135 | Taking down plastering on lathing (other than wire-netting) without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered) complete all as specified and directed by Engr-in-Charge. |
| 136 | M & L for point wiring with stranded copper conductor 2.5 Sqmm (nominal area) single core. Multistranded FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked drawn in and includng heavy duty PVC concealed conduit with fittings ISI marked terminated in junction box incl 1.5 Sqmm and connected to earh dolly including fixing of 1.2 mm thick MS sunk terminal box suitable flushed to wall with 3 mm thck plastic laminated sheet cover fixed with brass screws and cup washers or inmodula boxes or suitable size includng making good the disturbed sufraces as per existing surfaces complete all as specified and directed by Engr-in-Charge. |
| 137 | S and F of sheet steel enclosure with double door flush mounting, MCB DB, SPN 2 way wihtout busbar 240 volt factory fitted with earth bar, neutral links complete as requried and kaing good the disturbed surfaces complete all as specified and directed by Engr-in-Charge. |
| 138 | S & F MCB SPN 20 to 32 AMPS 240V 50Hz breaking capacity 10 KA 'C' series complete all as specified and directed by Engr-in-Charge. |
| 139 | Supply laying and testing cable XLPE insulated screened PVC bedded galvanized steel strip or wire armoured electric power cables (heavy duty ) 1100 volts grade with stranded aluminium conductor of soze 10 sqmm 4 core complete all as specified and directed by Engr-in-Charge. |
| 140 | Supply and laying GI pipe light graded of size 50 mm dia in trenches and fixing on wall / pole with help of suitable size MS clamp for cable protection with all fitting complete all as specified and directed by Engr-In-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 25 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender