Tender For Certain Repairs To Road, Potholes And Misc Work At Bairagarh Mil Stn Under Ge Bhopal
Tender Value
1 Crore
Estimated cost
Bid Submission
18 Nov 2026
21 days left
EMD
1.75 Lakhs
Bank guarantee accepted
Document Fee
100
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhopal → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Certain Repairs To Road, Potholes And Misc Work At Bairagarh Mil Stn Under Ge Bhopal
BOQ
| Sl. No. | Item Description |
| 1 | M&L for two coat of synthatic enamel paint on old concrete surface including surface preparation of any description (Road side cement concrete kerb stone in ZABRA Pattern) complete all as specified and directed. |
| 2 | Repairs to potholes any depth n exc 1 sqm each incl sweeping free from dust and mud or water, scoring sunken surfaces in road , path etc. Cutting around edges to at least 25 mm in depth making good but making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, using paving bitumen well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and directed. |
| 3 | Scarifying or picking gravelled macadam or bitumen macadam surfaces in area n . exc.400 sqm , depth exc 50 mm and not exc 100 mm deep complete all as specified and directed. |
| 4 | Laying and compacting 75 mm thick (compacted thickness) Wet Mix Macadam (WMM) grading as pe table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed The finished surface tolerances to be as per Table 900-1 of MaRTH specifications for Road and Bridge works 2013 complete all as specified and as directed. |
| 5 | Preparing surfaces by brushing with wire brushes for removing caked mud etc. swe eping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sq metre complete all as specified and directed. |
| 6 | M & for Preparing existing black top surfaces by brushing for removing caked mud etc sweeping with brooms and finally fanning the clear surfaces with gunny bags to remove dirt etc applying evenly a primming / tack coat with paving bitumen primer @5 Kg/10 Sqm of road surface for laying Bituminous premix asphaltic semi dense concrete/ Bituminous Macadam complete all as specified and directed. (Note: semi dense concrete/ Bituminous Macadam) will be measured and paid separately) |
| 7 | M&L for premix bituminous macadam with thickness (consolidated thickness 75mm or less) with 4% binder content (paving bitumen of grade VG-30) by weight of total mix prepared in hot mix plant, laying of mix with self propelled mechanical paver, duly rolled and compacted to required camber and gradient with 08 to 12 tonne power roller and vibrating roller etc complete all as specified and directed. |
| 8 | Applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sq metre complete all as specified and directed. |
| 9 | M&L for laying Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with 5.5% binder content by weight of total mix,using VG 30 bitumen by mechanised paver rolled and compacted to required camber and gradient complete and rolling to a smooth surface with 10 ton pneumatic roller complete all as specified and directed. |
| 10 | Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. |
| 11 | Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with10,000 to 18,000 mcd completed as per manufactures instructions etc. complete all as specified and directed. |
| 12 | Supply and fixing metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. |
| 13 | M & L for road line painting 100mm wide or with as directed with golden yellow/white thermostatic compound with reflectorised glass beads on bituminous road, providing and laying of hot applied thermostatic compound 2.5mm thick incl glass beads @ 250gm per sqm thickness 2.5mm is exclusive of surface applied, glass beads as per IRC-35. The finish surface to be level and uniform and free from streaks and holes in addition where arrows or letter to be provided thermoplastic compound may be hard spalayed. The colour of cmpound shall be as directed. complete all as specified and directed. |
| 14 | M&L in repair for identification sign/cautionary mandatory and information sign board area exc 0.60 Sqm and n exc 1.20 Sqm with thickness not less than 3.0mm aluminium composite panel covered by encapsulated lens type retro reflective sheet (grade 3M type II diamond grade of make 3M/dark eye/SNI ) on both side with green base, including writing of necessary letter/symbols of reflective type fixed on and including stainless steel frame of size 25mmx25mm and hang on 50mm dia stainless steel pipe(fabrication work from SS-304 material) of height 2.4 mtr from ground level to top and post embeded in ground with PCC 1:3:6 TYPE C-2 using 40mm graded aggregate of size 45x45x45cm including necessary excavation and earth work and making plateform of size 150x45x30cm with PCC 1:2:4 using 20mm graded aggregate including necessary formwork and covering all exposed surfacess with black colour glazed ceramic tile (joint less) of size (600x300x7mm) / (450x300x7mm thick over and including 10mm thick backing coat in cement mortar(1:4) set and jointed in neat cement slurry and pointed to match the tiles complete all as specified and directed. Note:- The letters and symbols etc on both side shall be as per site requirement of user and as approved by GE. The size and font of wording/ arrow/ symbols as per direction of Engineer In-Charge. |
| 15 | S & F in repair road convex miror outdoor type made of one piece polycarbonate of size 1000 mm including steel tube of nominal bore 80 mm and thickness of 4.0 mm as per IS 1161:2012 and 1.50 mtr length for mounting of mirror including painting on steel tube with synthetic enamel paint on red oxide zinc chrome primer in approved shade including embedding 300 mm below GL including ecavation and PCC M15 (Nominal Mix) with using 20 mm graded stone aggregate in foundation of size 400 mmx 400mmx400 mm and making good surface complete all as specified and directed . Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 21 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender