Tender For Repair To All Type Of Map Furniture Under Ge (W) Lucknow
Tender Value
47 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
17 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To All Type Of Map Furniture Under Ge (W) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | TABLE DINING 1200X900X760MM (4 PERS) : DRG NO FD/MAP/03 (For Item No 1 to 6) : S&F in repair of top of table shall be made of 18/19 mm prelaminated MDF board ext grade , ISI Marked IS-3087-1985 bonded with Phenol formaldehyde with one side teak face and other side white of exterior grade quality including with 4 mm thick teak wood beading all round the top complete as specified and as shown on drg. |
| 2 | S&F in repair legs 1st class seasoned teak wood free from knots and cracks with permissible moisture contents through out as per shape and size complete all as specified and shown on drawing . |
| 3 | All as per item No. 01 above but top long rail front or back complete all as spcified and as shown on drg. |
| 4 | All as per item No. 01 above but top short rail for sides complete all as spcified and as shown on drg.. |
| 5 | M&L for provision of Konia (wooden Bracket) of size 4\\"x3\\" seasoned teak wood 1\\" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as spcified and as shown on drg. |
| 6 | M&L for preparation of wooden surface with sand paper after scrubbing and apply two coat of French Polish glossy finish to table with drawers with and including to the parts repaired/replaced under item No 1 to 6 to the required gloss to match with the existing complete all as spcified and as shown on drg. |
| 7 | TABLE DINNING 1500 x 900 x 760 mm (6 PERS) DRG No FD/MAP-II/03 (For Item No 7 to 12) : S&F in repair of top of table shall be made of 18/19 mm prelaminated MDF board exterior grade, ISI Marked IS-30 87-1985 bonded with Phenol formaldehyde with one side teak face and other side white of exterior grade quality including with 4 mm thick teak wood beading all round the top complete as specified and as shown on drg . |
| 8 | S&F in repair legs of size 90x45mm front/rear left/right made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents throuh out as per shape and size complete all as specified on drawing and directed. |
| 9 | All as per item No. 7 above but long rail front or back complete all as spcified and as shown on drg. |
| 10 | All as per item No. 7 above but short rail for sides complete all as spcified and as shown on drg.. |
| 11 | M&L for provision of Konia (wooden Bracket) of size 4\\"x3\\" seasoned teak wood 1\\" thick in between leg and short/long rail of the table fixed with screw to provide more strength complete all as spcified and as shown on drg. |
| 12 | M&L for preparation of wooden surface with sand paper after scrubbing and apply two coat of Malamine Polish glossy finish to table with drawers with and including to the parts repaired/replaced under item No 7 to 11, to the required gloss to match with the existing complete all as spcified and as shown on drg. |
| 13 | REPAIR TO CHAIR DINING: DRG No - FD/E6/MAP/10 (For Item No 13 to 20) : S&F in repair 12 mm BWR phenol formeldehyde resin bonded plywood with permissible moisture contents as per shape and size complete all as specified and shown on in drawing. |
| 14 | All as per item No 13 above but front and rear legs of size 30x40mm 1st class teak wood complete all as specified and shown on in drawing. |
| 15 | All as per item No 13 above but stiffener size 20x25 mm 1st class teak wood complete all as specified and shown on in drawing. |
| 16 | All as per item No 13 above but all side rail size 65x25 mm 1st class teak wood complete all as specified and shown on in drawing. |
| 17 | All as per item No 13 above but nylon buffers complete all as specified and shown on in drawing. |
| 18 | S&F in reapir 75 mm thick 40 density foam with fabric on seat of new 12 mm thick ply BWR Grade duly covered with tapestry cloth of approved quality duly stiched complete all as specified and as shown on drawing and driected by Engr-in-Charge. Note : Cost of Tapestry cloth shall not be less than Rs 680/- per metre. |
| 19 | S&F in repair foam 40 density and 450MMx450MMX75MM and covered with tapestry cloth of approved quality duly fixed with 12 MM thick Plywood BWR Grade complete all as specified and shown on drawing. Note : Cost of Tapestry cloth shall not be less than Rs 680/- per meter . |
| 20 | M&L preparation of surface by Scraping off old polish with sand paper/Grinder and prepare surface to apply two coat of Malamine Polish glossy finish complete Chair repaired under item No 13 to 19 to the required gloss and colour complete all as specified and directed. |
| 21 | TABLE COMPUTER DRG No FD/E6/MAP/03: (For Item No 21 to 29) : S &F in repair of top made of 18/19mm prelaminated MDF Board exterior grade quality including with 4 mm thick oval beading duly polished coplete all as specified and as shown on drg. |
| 22 | S & F in repair drawer with SS Channel 12/14\\" & MDF Board exterior grade made of 18/19 mm thick with 4 mm thick oval beading and drawer 75mm deep on telescope channels duly polished and all as specified and as shown on drg. |
| 23 | S & F in repair Key board tray (450 x 480mm) with SS Channel 12/14\\" MDF Board exterior grade made of 18/19 mm thick with 4 mm thick oval beading and drawer 75mm deep on telescope channels duly polished and all as specified and as shown on drg. |
| 24 | S & F in repair bottom shelf made of 18 mm thick bothside pre laminated MDF board exterior grade with 4 mm thick oval beading duly polished and all as specified and as shown on drg. |
| 25 | S & F in reapir of vertical board made of 18 mm thick bothside pre laminated MDF board exterior grade with 4 mm thick oval beading duly polished and all as specified and as shown on drg. |
| 26 | S & F in repair mouse tray with 12/14\\" SS Channel made out of 18 mm thick bothside pre laminated MDF Board with 4 mm thick oval beading and 75mm deep on telescopic channels duly polished and all as specified and shown on drg. |
| 27 | S & F in repair handle and shape as exists and adjustable leveling foot / leveling glide ruber shoes in the bottom leg as specified and shown on Drg. |
| 28 | M&L for provision of Konia (GI Bracket ) of stainless steel in between of every joint of the table fixed with screw to provide more strength complete all as spcified and as shown on drg. |
| 29 | M&L preparation of surface bt scraping off old painting with sand paper/Grinder and apply two coat of black paint with spray gun machine and polishing glossy finish to complete table repaired under item No 21 to 28 to the required gloss and colour as directed by by Engineer-in-Charge. |
| 30 | CHAIR COMPUTER DRG No FD/MAP/01: (For Item No 30 to 37) : S & F in repair of Up Down adustable lever with size and shape as per exists of chair computer complete all as specified as shown on drg. |
| 31 | S & F in repair back of computer chair with size and shape as exists complete all as specified as shown on drg. |
| 32 | S & F in repair seat of computer chair with size and shape as exists complete all as specified as shown on drg. |
| 33 | S & F in repair seat of computer chair with size and shape as exists complete all as specified as shown on drg. |
| 34 | S & F in repair tapestry cloth on seat with black pvc back seat cover /PVC Quadrant Trim,Flexible Laminate Beading of computer chair approvel quality duly sitched complete all as specified on drawing and directed. |
| 35 | S & F in reapir coaster wheel of twin of computer chair with size and shape as exists complete all as specified as shown on drg. |
| 36 | S & Fin reapir hand rest of twin of computer chair with size and shape as exists complete all as specified as shown on drg. |
| 37 | S & F in reapir Pedestal assy Chromium plated MS injection moulded in black 30% glass filled nylon 10.5mm dia forged bright zinc plated MS castor pin of press fitted to each prong for holding the castors as per existing complete all as specified & shown on drg. |
| 38 | CHAIR SCHOOL WITH HAND BOARD DRG No FD/E6/MAP/05: (For Item No 38 to 41) : S & F in repair hand board made of 18/19 mm thick MDF board Exterior grade with PVC Quadrant Trim,Flexible Laminate Beading with size and shape as exists and all as spceified and as shown on drg. |
| 39 | S & F in repair PVC back & seat of size and shape as exists. incl 4 Nos of stainless steel screen of size 6 x 10x50mm long complete all as specified and shown on drg. |
| 40 | S & F in repair Rubber shoes of size and shape as exists all as shown on drg. |
| 41 | Supply and Fixing in repair of GI Frame by welding for books 4 Nos of stainless steel bolt at size 10x50mm long one side flat for fixing of shelf under the seat complete all as specified and directed. |
| 42 | CHAIR WRITING OFFRS DRG No FD/E6/MAP/12 : (For Item No 42 to 48) : S & F in repair front seat of chair writing with size and shape as exists complete all as specified as shown on drg.\\" |
| 43 | S & F in repair Back seat of chair writing with size and shape as exists complete all as specified as shown on drg. |
| 44 | S&F in repair tapestry cloth on chair writing with PVC Quadrant Trim,Flexible Laminate Beading approvel quality duly stitched complete all as specified and shown on drawing. |
| 45 | S & F in repair arm rest made of black internal with shin of chair writing with size and shape as exists complete all as specified as shown on drg. |
| 46 | S & F in repair stifner made of 5mm thick MS flat iron size and shape as exist all as specified and shown on drg. |
| 47 | All as per item No 42 above but joint the stiffner with welding work all as specified and shown on in drawing. |
| 48 | M&L preparation of surface by scraping off old painting with sand paper/Grinder and applying two coat of enameld paint black with spray gun machine complete all as secified and shown on drg. |
| 49 | CHARPOY IP FOLDING PLY TOP DRG No : FD-388® (For Item No 49 to 51) : S & F in repair ply top made of 8 mm thck BWR ply size and shape exists all as as complete as shwon on drg. |
| 50 | M&L for welding of broken joints including legs which shall be fixed with frame by nut and bolts of size as exists all as as specified and shown on drg. |
| 51 | M&L of preparation of surface by scraping off old paint with sand paper/Grinder and apply two coat of black paint with spray gun machine complete all as secified and shown on drg. |
| 52 | TEAPOY VERANDAH DRG No : FD/E6/MAP/17: (For Item No 52 to 54) : S & F in repair top of tepoy made of 18 mm thick pre laminated MDF board of exterior grade with PVC edge all around of size and shape as exists and all as specified & shown on drg. |
| 53 | S & F in repair bottom tray made of 5 mm thick ms bar base tray with size and shape as exsits complete all as specified and as shown on drg. |
| 54 | M&L preparation of surface by scraping off old paint with sand paper/Grinder and apply two coat of synthetic enameld paint black by spray gun machine complete all as secified and shown on drg. |
| 55 | TABLE BED SIDE DRG No : FD/E6/MAP/15(R) : (For Item No 55 to 61) : S&F in repair Top of table bed side shall be made of 18/19 mm prelaminated MDF board of exterior grade ISI Marked IS-3087-1985 with one side teak colour and other side white exterior grade complete all as specified & shown on drg. |
| 56 | S & F in repair drawer made of 12 mm thick ply, BWR grade as exist with all as specified and as shown on drg. |
| 57 | S & F in repair legs of size and shape as exists all as shown on Drg. |
| 58 | Ditto all as above item no. 55 but lower drawer as exists complete all as secified and as shown on drg |
| 59 | S & fixing in repair of new stiffner of size 400 x 50 x 25mm made of 1st class seasoned teak wood free knots and cracks with permissible moisture contents complete all as specified. |
| 60 | S & F in repair handle shape and size as exists all as specified and shown on Drg. |
| 61 | M&L preparation of surface by scraping off old painting with sand paper/Grinder and apply two coat of black paint with spray gun machine and polish glossy finish repaired under item No 55 to 60 to the required gloss and colour as directed. |
| 62 | TABLE PEG DRG No FD/MAP/11: (For Item No 62 to 66) : S&F in repair legs made of 1st class seasoned teak wood free from knots and cracks with permissible moisture contents through out as per shape and size as exists complete all as specified on drawing. |
| 63 | All item as per S.N. 62 above but long rail /short rail complete all as secified and shown on drawing. |
| 64 | Supply & Fixing in repair of stiffener made of 1st class teak wood complete all as specified and shown on in drawing. |
| 65 | S&F in repair top of peg table shall be made of 18/19 mm prelaminated MDF board of exterior grade ISI Marked IS-3087-1985 bonded with Phenol formaldehyde with one side teak colour and other side white exterior grade. |
| 66 | M&L preparation of surface by scraping off old polish with sand paper/Grinder and apply two coat of Malamine Polish glossy finish to complete Table Peg repaired under item No 62 to 65 to the required gloss and colour all as specified on drg. |
| 67 | TABLE DRESSING LADIES WITH MIRROR DRG No FD/MAP-II/07: (For Item No 67 to 83) : Supply and fixing in repair looking mirror of size 1200x380mm, 5mm thick duly framed with 1st class hard wood teak (MP) and back of mirror covered with 6mm thick BWR ply wood ,IS-303 grade complete all as shown on drawing and as specified. |
| 68 | S & F in repair 5 mm thick glass pane duly slotted for sliding purpose with size & shape as exists complete all as specified and as shown on drgs. |
| 69 | S & F in repair leg made of 1st class hard wood teak (MP) free from knots, cracks etc. with permissible moisture with shape and size as exists complete all as specified and as shown on drawing. |
| 70 | All item as per S.N 67 above but front side of U/S drawer with SS Channel and S & F new drawer with SS Channel 12/14\\" complete all as specified and as shown on drawing. |
| 71 | S & F in repair back & sides of drawer made of 12mm Ply wood BWR grade, IS-303 with size and shape as exists complete all as specified and as shown on drgs |
| 72 | All item as per S.N 67 above but back of drawer short rail complete all as specified and as shown on drawing. |
| 73 | S&F in repair of bottom ply wood 6mm BWR grade ISI Marked,IS-303 grade as per required size & shape as exists complete all as specified and directed. |
| 74 | S & F in repair top of table of 18/19mm thick prelaminated MDF board of exterior grade one side teak face and other side balancing white with shape and size as exists complete all as specified and as shown on drawing . |
| 75 | All as per item No, 67 above but bottom of table dressing ladies complete all as specified and as shown on drawing. |
| 76 | All as per item ser No, 67 above but sides of table dressing ladies complete all as specified and as shown on drawing. |
| 77 | S & F in repair frame with legs made of 1st class hard wood teak (MP) free from knots ,cracks etc with permissible moisture contains as per shape and size as exists complete all as specified and as shown on drawing . |
| 78 | S & F in repair shutter made of 18/19 mm thick pre laminated MDF board exterior grade of size and shape as existing complete all as specified and as shown on Drg. |
| 79 | S&F in repair 12 mm BWR phenol formeldehyde resin bonded plywood with permissible moisture contents as per shape and size as existing complete all as specified and shown on in drawing. |
| 80 | M&L for fixing new seat of foam cushion of size 370x325x75mm of 40 density duly covered & all as specified and as shown on drawing No FD/MAP II/07. |
| 81 | S & F in repair tapestry cloth on seat of stool of approvel quality duly sitched complete all as specified on drawing and directed by Engr-in-charge. |
| 82 | S & F in repair coaster wheel of stool dressing with size and shape as exists complete all as specified as shown on drg. |
| 83 | M&L preparation of surface by scraping off old polishing with sand paper/Grinder and apply two coat of Malamine Polish glossy finish to complete repaired under item No 67 to 82 to the required gloss and colour all as specified and directed. |
| 84 | TV TROLLY DRG No : FD/E6/MAP/04: : (For Item No 84 to 90) : S & F in repair of top made of 18/19 mm thick bothside pre laminated MDF board exterior grade top with edge moulded all around and size and shape as exists and all as complete as shown on drg. |
| 85 | M&L for preparation of wooden surfaces by sand papering and cleaning and polishing with french polish upto the required finish all as specified on drawing and directed by Engineer-in-Charge. |
| 86 | S & F in repair side board made of 18 mm thick bothside pre laminated MDF board exterior grade top with edge moulded all around and size and shape as exists and all as specified and as shown on drg. |
| 87 | S & F in repair back board made of 18 mm thick bothside pre laminated MDF board exterior grade top with edge moulded all around and size and shape as exists and all as complete as shown on drg. |
| 88 | S & F in repair of glass shutter made of 5.5 mm thick openable with magnetic catcher as exists and all as specified and as shown on drg. |
| 89 | S & F in repair coaster wheel of twin of TV Trolly with size and shape as exists all as specified as shown on drg. |
| 90 | S & F in repair magnetic catcher of TV Trolly with size and shape as exists complete all as specified as shown on drg. |
| 91 | HARD BED STEEL DRG No FD/MAP/E6/08 (R) : (For Item No 91 to 98) : S & F in repair of Ply top of hard steel made of 12 MM thick commercial BWR Ply ISI : 303 complete all as specifed and as shown on drg . |
| 92 | S & F in repair head board made of 18/19 MM thick both side pre lamineted MDF Board of exterior grade and including 4mm thick teak wood beading alround with size and shape as exists all as per specified and as shown on drg. |
| 93 | S & F in repair foot board made 18/19 MM thick both side pre lamineted MDF Board of exterior grade and including 4mm thick teak wood beading alround with size and shape as exist all as specified and as shown on drg. |
| 94 | Supply and fixing in repair long rails made of 25 X65 mm MS rectangular 18 Guage welded with short rails on bed hard steel size and shape as exists all as specified and as shown on drg. |
| 95 | Supply & fixing in repair short rails made of 25X65 mm MS rectangular 18 Guage welded with long rail on bed hard steel size and shape all as shown on drg. |
| 96 | S & F in repair legs made of 38 x 38 mm MS square pipe 18 Guage welded with frame of bed hard steel complete all as spceified and shown on drg. |
| 97 | S & F in repair rubber shoe of size and shape as exists all as shown on drg. |
| 98 | M & L of preparation of surface by Scraping off old paint with sand paper/Grinder and applying Two coats of synthetic enamled paint with spray gun machine after cleaning the surface complete all as specified and as shown on drg. |
| 99 | CHARPOY WITH HARD TOP DRG No FD/MAP-II/01 : (For Item No 99 to 104) : Supply and fixing in repair ply top made of 12 MM thick BWR Grade Ply ISI : 303 complete all as specifed and as shown on drg. |
| 100 | Supply and fixing in repair long rails made of 25 X65 mm MS rectangular 18 Guage welded with short rails of charpoy ms ply top of size and shape all as specified and as shown on drg. |
| 101 | Supply & fixing in repair short rails made of 25X65 mm MS rectangular as exists 18 Guage welded with long rail on charpoy ms ply top size and shape as exists all as shown on drg. |
| 102 | Supply and fixing in repair legs made of 38 x 38 mm MS squrare pipe 18 Guage welded with frame of charpoy ms ply top complete all as spceified and shown on drg. |
| 103 | Supply and fixing in repair rubber shoe of size and shape as exists all as shown on drg. |
| 104 | M&L for Preparing of wooden surface with sand paper/Grinder after Scraping of old paint with and prepare surface to including all parts repaired/replaced under item No 99 to 103 applying Two coats of synthetic enamled paint wiht spray gun machine after cleaning the surface complete all as per specified and as shown on drg. |
| 105 | HAT STAND WITH MIRROR (Drg No FD-233 & FD-3622) : (For Item No 105 to 110) : Supply and fixing in repair frame of size 710x1000mm with 4mm thick teak face ply in front side and shall be covered with 4mm thick commercial ply on back side complete all as specified and as shown on drgs. |
| 106 | S&F in repair mirror of size 300x460x5mm and teak wood beading 10x12mm provided vertically top/bottom vertically (Side) shall be fixed on right hand as shown on drg. |
| 107 | S&F in repair MS Plate of best quality as exists complete all as specified and directed. |
| 108 | S&F in repair Brass peg of Size 75x120mm of best quality complete as specified and directed. |
| 109 | S&F in repair Aluminium peg peg of Size 75x120mm as exists of best quality complete as specified and directed. |
| 110 | M&L for Preparation of wooden surface with sand paper after scrubbing and French polishing with spary gun machine to hat stand , with and including to the parts repaired/replaced under item No 105 to 109 to the required gloss to match with the existing complete all as specified and as shown on drg. |
| 111 | BIN LINEN MULTIPURPOSE : DRG NO - FD/E6/MAP/09:(For Item No 111 to 121) : S&F in repair legs of size 50x50x75mm made of 1st class HW(Teak) well seasoned free from knots and cracks with permissible moisture through out shape and size & applying duly two coat of French polished to match with existing surface complete all as specified and shown on drg. |
| 112 | All as per item No 111 above but bottom frame of size 1060x 290x 25x 45mm complete all as specified and shown on drg. |
| 113 | Supply and fixing in repair drawer made of 12mm thick ply BWR with size and shape as exists complete all as specified and as shown on drg. |
| 114 | Supply and fixing in repair top made of 18/19 mm thick prelaminated MDF Board (exterior Grade) as existing complete all as specified and as shown on drg. |
| 115 | S&F in repair partition of MDF board of size 610x460mm x18mm complete all as specified and as shown on drg. |
| 116 | All as per item ser No. 111 above but top or bottom of size 1220x455mmx18mm complete all as specified and shown on drg. |
| 117 | Supply and fixing in repair ply of size 1220x635mm, 6mm thick commericial BWR grade, IS-303 grade complete all as specified and as shown on drg. |
| 118 | All as per item No 111 above but side of size 645 x 455mm complete all as specified and shown on drg. |
| 119 | All as per item No.111 above but shelf of size 425x770 complete all as specified and shown on drg. |
| 120 | Supply and fixing in repair Handle 75mm, brass, chromium plated complete all as specified and as shown on drg. |
| 121 | M&L for Preparation of wooden surface with sand paper after scrubbing and French polishing to side board, with and including to the parts repaired under item No 111 to 120 to the required gloss, to match with the existing complete all as specified and as shown on drg. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender