Tender For Removal Of Ceiling Plastering And Finishing Two Coat Putty Finish With Color Wash In Reinforced Cement Concrete South Facing School Building Single Class Room In Alambadi Pums
Tender Value
2.78 Lakhs
Estimated cost
Bid Submission
31 Oct 2026
2 days left
EMD
2780
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Cuddalore → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Removal Of Ceiling Plastering And Finishing Two Coat Putty Finish With Color Wash In Reinforced Cement Concrete South Facing School Building Single Class Room In Alambadi Pums
BOQ
| Sl. No. | Item Description |
| 1 | NAME OF WORK : Removal of Ceiling Plastering and Finishing Two Coat Putty Finish with Color Wash in RCC South facing School Building Single Class Room in Alambadi PUMS |
| 2 | Dismantling and removing the existing damaged terrace flooring with weathering course including all labour charges etc., |
| 3 | Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone M.Sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers) |
| 4 | Plastering with Cement Mortar 1:4 (One Cement and Three P.Sand) 20mm thick mixed with water proofing compound conforming to BIS at 2% by weight of cement used including finsihing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers. |
| 5 | Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom, toilet, balcony & utility area applied @ 2.2kg/m2 in 2 coats to achieve 1.2mm DFT, having Elongation at break >120% as per ASTM D 412, Tensile strength >1N/ mm2 as per ASTM D 412, Adhesion strength: 0.80N/mm2 as per ASTM D 4541, crack bridging upto 2mm as per ASTM C 836. The finished cost to include surface preparation, making coving of 50 mm X 50mm at all right angles of wall Junction with Polymer Repair Mortar and lay 45 gsm glass fibre mesh over the angle fillet when the first coat in still wet, treatment of cracks completely as per specification |
| 6 | Chipping and roughining existing plastering surface including all labour charges etc., |
| 7 | CC 1:4:8 mix using 40mm metal including cost and conveyance and all labour charges etc., |
| 8 | Brick work in CM 1:5 mix using Country Bricks including cost and conveyance and all labour charges etc., |
| 9 | Plastering in CM 1:5 mix to 12mm thick including cost and conveyance and all labour charges etc., |
| 10 | Granolothick floor finish including cost and conveyance and all labour charges etc., |
| 11 | Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers. |
| 12 | Paving the floor with kota stone slab of size 600 x 600 of 18 / 20mm (un-polished) in all floors laid in of cement mortor 1:3 (one cement three M.Sand), 20mm thick and pointed with colour cement neatly including polishing with polishing stone and oxalic acid etc., so as to perfectly smooth and glossy and including hire charges for polishing machine and power consumption charges etc. The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification. |
| 13 | Distempering in two coats using approved quality of Distemper including cost & conveyance and labour charges etc... complete |
| 14 | Exterior Emulsion Painting in two coats including cost & conveyance and labour charges etc... complete |
| 15 | Painting in two coats over old iron works including cost & conveyance and labour charges etc... complete |
| 16 | Provision for Rain water harvesting structure 1 No |
| 17 | Cost for Name board charges etc., |
| 18 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender