Tender For Providing Pipeline, Water Tank Of Pwss @Kalakewadi, V.P.Veer, Tal- Chiplun, Dist- Ratnagiri
Tender Value
Ref. Documents
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
14908
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ratnagiri → Maharashtra
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Pipeline, Water Tank Of Pwss @Kalakewadi, V.P.Veer, Tal- Chiplun, Dist- Ratnagiri
BOQ
| Sl. No. | Item Description |
| 1 | Sub Estimate No 1 :- Pump House |
| 2 | Item No 1 :- Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means |
| 3 | Item No 2 :- Excavation for foundation in H.R. by Blasting including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means |
| 4 | Item No 3 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) |
| 5 | Item No 4 :- Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. |
| 6 | Item No 5 :- Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. |
| 7 | Item No 6 :- Providing laterite masonry in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete |
| 8 | Item No 7 :- Providing & fixing M;40 grade precast RCC framed doors with asbestos cement shutter with all fitting including hinges lock rail etc complete |
| 9 | Item No 8 :- Providing & fixing M;40 grade precast RCC framed Window with asbestos cement shutter with all fitting including hinges lock rail etc complete |
| 10 | Item No 9 :- Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. |
| 11 | Item No 10 :- Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally /square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Natural Sand |
| 12 | Item No 11 :- Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc.complete. |
| 13 | Item No 12 :- Providing and applying of water proof cement paint of approved manufacture and color to the plaster surface, including scaffolding preparing the surface watering for two days etc. complete. |
| 14 | Item No 13 :- Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connec tion and one coat of nticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. |
| 15 | Item No 14 :- Providing and fixing 6.00 mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron band bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. |
| 16 | Item No 15 :- Providing and fixing M.S. chequerred plate flooring of following thickness supportedon M.S.angles (25x25x5mm size) including welding, cutting and fabricating the plate to the required square or rounding shape ,making holes in the plate, including providing and applying 3 coats o anticorrosive paint, etc. complete as directed by Engineer-in-charge. |
| 17 | Sub Estimate No 2 :- Pumping Machinery |
| 18 | Item No 1 :- Providing erecting giving testof submersible pump set conforming to IS 8034 and moter coforming to IS 9283 with water proof winding, pump shall be sutaible for verious delivery head and discharge with stainless steel shaft, moter sutaible for working on 415v + 10% 3oh 50Hz A.C. supply, with cable guard, thrust carben/ fiber bearing to stand entire hydrolic thrust, The pump set shall be sutaible for direct coupling with sutaible suction stiner pump should have sutaible discharge out let as per manufacture design. Antithrust stream lined non return valve shall be provide with the pump. 3m submersible copper coundctor cable in single/ double run and 2 pairs of sutaible size clamp 10mm thck shall be provided with each pmp. |
| 19 | 3.0 bhp |
| 20 | Item No 2 :- Supplying and erecting Fully Automatic Star Delta starter to operate squirrel cage induction motor working on 380- 440 Volt, 3 phase, 50 Hz with no volt coil, over load element, and ON - OFF push buttons, with necessary material and connected to supply, etc complete. Starter with original sheet steel encloser. |
| 21 | Item No 3 :- Providing and supplying ISI mark CI D/F reflux valve (non return valves) of following dia including all taxes (local and central), railway fright, octroi, inspection charges,un loding from raiway wagon, loading in to truck, transport up to departmental store/ site, unloding, stacking etc. complate.Reflux valve as per IS-5312 part-I (1984) |
| 22 | Item No 4 :- lowering laying and jointing in position following C.I.D/FReflux valve,Butterfly valve and Sluice valve including cost of all labour jointing material including nut bolts and giving satisfactory hydraulic testing etc. complete.(rate for all class of valve) |
| 23 | Item No 5 :- Providing erecting jointing testing of various drop pipe 50 mm dia G.I. heavy class in 1.5 M/1 M length or any other length as per site condition with heavy duty flanges . ... etc complete as per detailed specification. |
| 24 | Sub Estimate No 3 :- Rising Main |
| 25 | Item No.1 :-Excavation for foundation / pipe trenches in earth soil of all type sand gravel and Hard murum including removing excavated material up to distance of 50 m. and lift as bellow stacking spreading as directed normal dewatering preparing the bed for foundation excluding back filling ...etc complete |
| 26 | Item No.2 :-Excavation for foundation / pipe trenches in hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 m.from the area and lift as bellow, normal dewatering excluding back filling ...etc complete. (414+10%For hilly area) |
| 27 | Item No.3:-Providing & supplying in standard length HDPE pipes confirming ti IS 4984 /14151/12786/13488 with necessary jointing material like mechanical connector in all respect in cluding inspection charges transportation to store etc complete |
| 28 | 63mm 8 kg |
| 29 | Item No4:Lowering, Laying and Jointing HDPE pipes following class & diameter including conveyance from store to site of work all labour etc complete either underground or in vertical position as directed by Engineer in charge |
| 30 | 63mm 8 kg |
| 31 | Item No5-Hydraulic testing of HDPE pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc. required for testing, Therates under this item shall also include cost of retesting if necessary and reinstating to original postion. |
| 32 | 63mm 8 kg |
| 33 | Item No.6:-Providing and laying in situ, folling grad of C.C. trap / granite / gneiss metal for foundation and bedding including dewatering form work compacting and curing, finishing, etc. complate.P.C.C.M-15 |
| 34 | Item No7-Refilling the excavated trenches with available excavated stuff with soft material first over pipe line and then hard material in 15 cm thick layer with all lead and lift including consolidation srcharging etc. complate. |
| 35 | Item No.8:-Providingand supplying Air valves as per IS14845-2000 and MJP standard specifications of approved make and quality of following diameters including all taxes(central and local) railway freight, inspection charges, unloading from railway freight loading into truck transportation up to departmental store/site unloading and stacking etc.complate. |
| 36 | 20 MM Dia Air valve single ball Pn 1.0 |
| 37 | Item No9:-Lowering laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in charge including cost of conveyance from store to site of work cost of all material and giving satisfactory hydraulic testing etc.complete. (for all class of valve.) |
| 38 | 20 MM Dia Air valve single ball |
| 39 | Sub Estimate No 4 :- RCC GSR |
| 40 | Item No 1:- Designing (aesthetically), and constructing RCC Elevated/ Ground service reservoirs of following capacity with RCC staging consisting of columns, internal and external bracings spaced vertically not more than 4.5 meters centre to centre distance for GSR having Capacity upto 500 Cum. and not more than 6 m c/c distance for GSRs having capacity above 500 cum including excavation in all types of strata, foundation concrete, cement plaster with water proofing compound to the inside face of the container including refilling disposing of the surplus stuff within a lead of 50 meters, all labour and material charges including lowering, laying, erecting, hoisting and jointing of pipe assembly of inlet, outlet, washout, overflow and bypass arrangements as per departmental design, providing and fixing accessories such as Stainless Steel ladder, C. I. manhole frame and covers water level indicatiors, lightening conductor, G. I. pipe railing around walk way and top slab, providing spiral staircase from ground level to roof level,M.S.grill gate of 2 mtr.height with locking arrangement of approved design. B.B. masonry chambers for all valves, ventilating shafts, providing and applying three coats of Acrylic emulsion with silicon additives Paint to the structure including roof slab epoxy painting to internal surface & anti termite treatment for underground parts of the structure. and giving satisfactory water tightness test as per I.S. code, The jobto include painting the name of the scheme and other details on the reservoir as per the directions of Engineer-in-charge.treatment shall be given for under ground portion of the structure. |
| 41 | 10000 Lit GSR |
| 42 | Item No-2:-Providing & Fixing Name Board |
| 43 | Sub Estimate No 5 :- Electrification & Disinfection arrangement |
| 44 | Item no:-1 Making electrification arrangement for scheme etc complete |
| 45 | Sub Estimate No 6 :- Distribution System |
| 46 | Item No.1 :-Excavation for foundation / pipe trenches in earth soil of all type sand gravel and Hard murum including removing excavated material up to distance of 50 m. and lift as bellow stacking spreading as directed normal dewatering preparing the bed for foundation excluding back filling ...etc complete |
| 47 | Item No.2 :-Excavation for foundation / pipe trenches in hard rock by blasting including trimming and leveling the bed by chiseling where necessary and removing the excavated material and stacking it in measurable heaps within a distance of 50 m.from the area and lift as bellow, normal dewatering excluding back filling ...etc complete. |
| 48 | Item No.3:-Providing ISI mark ----pipe of following class and dia including all local and central taxes octroi, inspection charges,transport to dept.store/site . etc. complete. Asper IS 1239/2004 |
| 49 | 75mm 6Kg |
| 50 | 63mm 6Kg |
| 51 | Item No 4:-lowering laying and jointing HDPE.pipe and specials of following class and diameter including conveyance from store to site of work, all laborus giving satisfactory hydraulic test etc complete eighter under ground or vertical position, etc complete as directed |
| 52 | 75mm 6Kg |
| 53 | 63mm 6Kg |
| 54 | Item No 5-Hydraulic testing of HDPE pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km using reciprocatingtype pumps which should be able to provide specifiedtest pressure gauges and other necessary equipments,labour operation charges etc. required for testing, The rates under this item shall also include cost of retesting if necessary and reinstating to original postion. |
| 55 | 75mm 6Kg |
| 56 | 63mm 6Kg |
| 57 | Item No.6:-Providing double flanged sluice valve confirming for IS2906/14846 including worn gear arrangement as per test pressure stanless steel spindal, cap including all taxes transportation etc. coplete. |
| 58 | Item No.7:-lowering laying and jointing in position following C.I.D/FReflux valve,Butterfly valve and Sluice valve including cost of all labour jointing material including nut bolts and giving satisfactory hydraulic testing etc. complete.(rate for all class of valve) |
| 59 | Item No.8:-Providingand supplying Air valves as per IS14845-2000 and MJP standard specifications of approved make and quality of following diameters including all taxes(central and local) railway freight, inspection charges, unloading from railway freight loading into truck transportation up to departmental store/site unloading and stacking etc.complete. |
| 60 | 20MM Dia Air valve single ball Pn 1.0 |
| 61 | Item No 9:-Lowering laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in charge including cost of conveyance from store to site of work cost of all material and giving satisfactory hydraulic testing etc.complete. |
| 62 | 20MM Dia Air valve single ball Pn 1.0 |
| 63 | Item No.10:-Providing and laying in situ, folling grad of C.C. trap / granite / gneiss metal for foundation and bedding including dewatering form work compacting and curing, finishing, etc. complate.P.C.C.M-15 |
| 64 | Item No11-Refilling the excavated trenches with available excavated stuff with soft material first over pipe line and then hard material in 15 cm thick layer with all lead and lift including consolidation srcharging etc. complate. |
| 65 | Item No.12 -Providing & Making UPVC/MDPE Domestic Water Tap Connection on distribution system ...etc.complete. |
| 66 | A) With Road Crossing |
| 67 | B) Without Road Crossing |
| 68 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 02, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender