Tender For Improvement Of The Water Supply Network By Replacing Ac Pipeline With Di Pipeline In Seven Wards Of The Cuncolim Municipal Area In Cuncolim Constituency.
Tender Value
7.15 Crore
Estimated cost
Bid Submission
09 Nov 2026
13 days left
EMD
14.31 Lakhs
Bank guarantee accepted
Document Fee
25000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Improvement Of The Water Supply Network By Replacing Ac Pipeline With Di Pipeline In Seven Wards Of The Cuncolim Municipal Area In Cuncolim Constituency.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator) manual means in foundation pipeline trenches or drains not exceeding 1.5 m in width 10 sq. m on plan including dressing of sides ramming of bottoms ,for all lead and lift including getting out the excavated soil and disposal of surplus soil with all lead including providing barricading danger lighting guarding as directed by the departmental officer in all types of strata comprising any of the materials such as soil ,silt, sand, clay, gravel. moorum of all conglomerated laterite rock, ,soft rock , fissured shattered decomposed rock or weathered rock and all such other materials as described under Appendix A to these specification either in full or in parts as the case may be adopting any approved method of methods as may be convenient or permitted inclusive of chiselling wedging etc., blasting prohibited in all conglomerates as directed by the Engineer -in -charge etc. complete. |
| 2 | Cutting the bituminous road for laying the pipeline in trenches including labour, tools, etc. and disposing the excavated excess material from the trench to a distance of 1000 metres, including making level the trench surface by utilising the serviceable material to the level of the top surface of road, by compacting, watering ramming with rolling with road roller after completion of laying of pipe and refilling the trenches etc. complete as per the direction of engineer in charge.;By Manual Means :;Rural Roads . |
| 3 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329- 2000 with cement mortar lining inside the pipe and outside zinc coat as per IS :8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .;Nominal Diameter in mm;150 |
| 4 | Supplying at store or site of work including railway freight carting loading and unloading stacking etc. Centrifugally cast (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329- 2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .;Nominal Diameter in mm;100 |
| 5 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Bend 90 Degree;Nominal Diameter in mm;150 |
| 6 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Bend 45 Degree;Nominal Diameter in mm;150 |
| 7 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Bend 22.5 Degree;Nominal Diameter in mm;150 |
| 8 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Bend 11.25 Degree;Nominal Diameter in mm;150 |
| 9 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortarlining & externally coated with zinc with finishing layer of bituminious paint complete.;All Socket Tee; Nominal Diameter in mm; 150x150 |
| 10 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;All Socket Tee; Nominal Diameter in mm; 150x100 |
| 11 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Tee with Branch Flange;Nominal Diameter in mm;150x100 |
| 12 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Tee with Branch Flange;Nominal Diameter in mm;150x150 |
| 13 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double Socket Tee with Branch Flange;Nominal Diameter in mm;150x80 |
| 14 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Flanged Socket;Nominal Diameter in mm;150 |
| 15 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;M.J.Collar;Nominal Diameter in mm;150 |
| 16 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;M.J.Collar;Nominal Diameter in mm;100 |
| 17 | Supply at store or site of work including railway freight carting loading unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. ;Double socket branch flange Invert tee (Scour valve);Nominal Diameter in mm;150x100 |
| 18 | Supply at store or site of work including railway unloading stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.;All Socket Cross; 150 |
| 19 | Supplying cast iron fittings as per IS : 1538 -1993 including sealing rubber gasket (NR) CI Compression glands and coated MS Nuts bolts.; Flanged Socket Tail piece ( Flanged Adaptors);Nominal Dia in mm;100 |
| 20 | Supplying at store or at site of work cast iron specials for mechanical and push on flexible joints as per IS: 13382 - 1992 including Sealing rubber gaskets (NR) CI compression glands and coated MS Nuts bolts.;Double Socket Branch Flange Tee; Nominal Dia in mm; 300x300x150 |
| 21 | Supplying at store or site of work including freight transit insurance carting loading unloading stack ingetc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846-2000 non ising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.0 (Class A);Nominal Diameter in mm;150. |
| 22 | Supplying at store or site of work including freight transit insurance carting loading unloading stacking etc. Ductile Iron double flanged manually operated Sluice valve generally confirming to IS 14846- 2000 non rising spindle type (soft seated) resilient seated with Body Bonnet of Ductile Iron of grade GGG40 or SG 400/12 400 /15 500/7 or equivalent grade as per IS 3896 part 2- 1985 and subsequent revisions Wedge fully rubber lined with food grade EPDM( WRAS approved) and seals of NBR spindle stem SS/AISI 410 and having glandless operation. The valve should be vacuum tight 100% leak proof with face to face dimensions as per IS14846-2000 or BS 5163- 89 or DIN 3202-F4. The valves shuld be coated with electrostatic Powder/ Epoxy Coating on both inside and outsideminimum 250 microns thickness of blue color RAL5017/5005 suitable for drinking water and shall have pocket less body passage. The flanges shall be Drilled as per IS: 1538 with latest amendments. The valve shall be supplied with Hand Wheel for operation (by-pass and gear arrangements for sizes above 400mm dia) and relevant Test & Guarantee certificates. TYPE P.N. 1.0 (Class A);Nominal Diameter in mm;100 |
| 23 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diamter in mm.; 150 |
| 24 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as per IS:2685-1971 CLASS I; Nominal diamter in mm.; 100 |
| 25 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. C. I. Double orifice type air valveas per fig DS1 with in built isolating valve smallwith SS spindle and CI protective cap confirming to IS1 4845 /2000 ( wirh latest ammendments).Low pressure large orifice chamber with vulcanite coated timber ball resting on moulded rubber seating and chamber having CI cowl protection.High pressure chamber shall have rubber coated timber ball as floathaving Float guides ; and LTB or SS orifice nipple The body seat ring shall be of LTB as per IS 318 LTB2 or of SS. All nuts /bolts shall be of carbon steel of SS. The flange shall be drilled and faced as per IS1538(part 4 &6) suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B); Dia in mm;50 |
| 26 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST \\"D\\"\\" suitable to working pressure of 10 kg /sq. cm.;Nominal diamter in mm.;50 \\" |
| 27 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. galvanized mild steel continuous weld tubes conforming to IS:1239 (part II) 1975 with latest amendments screwed at both the ends as per IS : 554-pipe threads one end fitted with socket other end with plastic protection ring at random length 4-7 metres.;Class B;Nominal Diameter in mm;150 |
| 28 | Supplying at store or site of work including railway freight carting loading unloading stacking etc. galvanized mild steel continuous weld tubes conforming to IS:1239 (part II) 1975 with latest amendments screwed at both the ends as per IS : 554-pipe threads one end fitted with socket other end with plastic protection ring at random length 4-7 metres.;Class B;Nominal Diameter in mm;100 |
| 29 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints;S&S flanged/plain ended specials |
| 30 | Conveying carefully from stack at site 250m from both sides rolling and lowering in trenches laying and jointing true to line and level and perfect linking of joints;Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes. |
| 31 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineerin -charge;Dia in mm;150 |
| 32 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity including the cost of hire charges of mechanical grinder diesel operated electrical generator set suitable for supplying power for the grinder for cutting cost of grinding blades skilled work force fuel etc required for completion of job as per the direction of Engineerin -charge;Dia in mm;100 |
| 33 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) SBR type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144- 1985;Nominal diamter in mm.;150 |
| 34 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) SBR type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap tosocket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket oil soft soap and hydraulic testing of jointing as per IS:3144- 1985;Nominal diamter in mm.;100 |
| 35 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.;Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;150 |
| 36 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; Double socketed specials such as bends collar couplings etc;Nominal Diameter in mm;100 |
| 37 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; All Socket Tee; Nominal Diameter in mm; 150x150 |
| 38 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; All Socket Tee; Nominal Diameter in mm; 150x100 |
| 39 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.;All Socket branch flange Tee;Nominal Diameter in mm;150x100 |
| 40 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; All Socket branch flange Tee;Nominal Diameter in mm;150x150 |
| 41 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; All Socket branch flange Tee;Nominal Diameter in mm;150x80 |
| 42 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; Flanged Socket;150 |
| 43 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the jointsfor pushon tight joints and including the cost of rubber ring nut bolts for flanged joint including the cost of work force tools hydraulic testing of joints etc complete as per the direction of the engineer incharge.; All Socket branch flange Tee;Nominal Diameter in mm;300x150 |
| 44 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 45 | Centering and shuttering including struttings propping etc. and removal of formwork for :;vertical surfaces such as retaining walls return walls walls (any thk) including attached pilasters buttresses plinth and string courses fillets etc. |
| 46 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level |
| 47 | Providing & laying cement concrete 1: 1.5: 3 (1 cement: 1.5 coarse sand: 3 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering shuttering and finishing in:;All works upto plinth level |
| 48 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming Vedge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate; Tees bends reducers |
| 49 | Supplying stacking at site and conveying hoisting laying in position to correct line and level and linking joints of MS specials. fabricated from MS plate including cutting bending welding procurement of plates gas cutting to required size rolling tack welding assembling in suitable length to form special welding on automatic machine and forming Vedge on both ends of special as required hydraulic pressure test at factory to the required test pressure conforming to IS : 3589-1991 including freight etc. complete;With 10 mm -12 mm thick plate; M.S .spigot tail piece suitable for connectiong M.S pipeline with C.I./D.I pipeline |
| 50 | Supplying cast iron saddle pieces of the following sizes including bolts nuts rubber packing suitable for giving service connection for AC / PVC pipeline of various classes.;Dia in mm; 150 |
| 51 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;20 mm nominal bore |
| 52 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality :;25 mm nominal bore . |
| 53 | Supplying of ASTM UPVC pipe conforming to ASTM 1785 with ISO 14001 etc. complete.;SCH-80(Blue)/(white) ;Outer Dia in mm;20 |
| 54 | Supplying of ASTM UPVC pipe conforming to ASTM 1785 with ISO 14001 etc. complete.;SCH- 80(Blue)/(white) ;Outer Dia in mm;25 |
| 55 | Making connection to individual 15mm /20mm /25mm G.I/ OD Blue PVC pipeline with existing distribution line of any diameter with saddle piece / and necessary pipe and specials required suitable to the distribution line with road cutting trenching refilling the same including the cost of labour and accessories etc. complete. as per the direction of engineer -incharge. |
| 56 | Construction of Reinforcement cement concrete chamber 90x90x150cm inside with 30 cms wall thickness in Cement Concrete 1:2:4 ( 1 cement : 2coarse sand:4 graded granitic or basaltic stone aggrt. 20mm. nominal size ) including centering /shuttering and TMT steel not less than 70kg/cu.m for sluice valves or equivalent main valves of suitable diameter with necessary excavation 15cms thick rubble packing and 10cms thick foundation concrete 1:3:6 ( 1 cement : 3 coarse sand: 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) and inside plastered with cement mortar 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and as per standard drawing (rate is inclusive of earthwork excavationand all other materials and labour as per details above excluding cost of surface chamber cover) as directed by the Engineer in-charge. |
| 57 | Manufacturing Fabricating supplying and fixing in position over the main valve chamber. Two/three shutter M. S. cover manufactured out of 10mm thick M.S.plate size (1.2 mx1.2m)with bottom angles of size 65x65x6mm supporting parallel in the middle M.S. I beam of size 125x75 as per requirement & size of chamber with both side extended 20cm to 30cm to be fixed in the wall further supporting Diagonal angles and cross angles of size 65x65x6mm to both way perfectly hinged with 8nos of bar hinges capable to withstand heavy vehicle impact 4 nos. of handles made out of 12mm to 16mmdia bar bottom side locking rrangement for both main shutter as well a side shutter and welded 4 nos. of holdfast of L.S. 65x65x6mm to 40cm-long 4nos of bar hinges of high strength double angles and hold fast should be embedded in einforcement concrete of 1:2:4 or richer mix incl. Transportation labour Priming coat painting etc. complete As per standard drawing. (10mm thick 1.2m x 1.2m M.S plate surface cover for R.C.C chamber size 90 cmx90cmx150cm) as directed by the Engineer incharge. |
| 58 | Construction of masonry chamber 90x90x100 cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4( 1 cement : 4 coarse sand) for sluice valve of sizes 100 mm 120 mm 150 mm and 200mm dia with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1:3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below);with M. S. sheet cover with 12mm thick M.S. plate and frame of Angle iron 50x50x6mm in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) |
| 59 | Construction of masonry chamber 60x60x75cm inside in 40kg/sq. cm brickwork complete with 23 cms wall thickness and in cement mortar 1:4( 1 cement : 4coarse sand) for sluice valves 50 to 80mm with necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 coarse sand: 10 graded stone ballast 40 mm nominal size) and inside plastered with CM 1: 3 ( 1 cement : 3 coarse sand) finished with floating coat of neat cement complete and chamber cover as specified below etc. all complete as per standard drawing . (rate is inclusive of rate earthwork excavation cost of surface cover and all other materials and labour and as per details below); with C.I. Surface box 100mm top dia 160mm bottom dia and 160mm deep of wt 15kg inside with chain lid in 120 mm thick RCC slab cover in cement concrete 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone ballast 20 mm nominal size) |
| 60 | Refilling the pipeline/foundation trenches plinth sides foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 61 | Construction of embankment with approved materials deposited at site from roadway cutting and excavation rom drain and foundation of other structures graded and compacted to meet requirement of Table 300- 2 as per MORTH specification 305 |
| 62 | Providing. Laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density as per MORTH Specification 406 |
| 63 | Providing and applying primer coat with bitumen or bitumen emulsion on prepared surface of granular base including clearing of road surface and spraying primer using mechanical means as per MoRT&H ecifications clause 502.;Bitumen emulsion @ 1.00 kg/sq.m. |
| 64 | Providing and laying bituminious concrete with 40-60 TPH Drum Mix type Hhot mix plant producing an average output of 50 tonnes per hour using crushed aggregates of specified grading premixed with bituminious binder to mix with filler transporting the hotmix to work site with all leads laying with a hydrostatic/hydraulic paver finisher with sensor control to the required grade level and alignment using antistripping agent rolling with smooth wheeled vibratory or tandem rollers to achieve the desired compaction complete as per MoRT&H Specifications Clause 509;Grade-II (13mm nominal size) @ 6.0% Bitumen of grade 60/70;Antistripping agent @ 0.5% of bitumen content. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender