Tender For Carrying Out Identified Additional Work For Office Building At Ecsd P Ore, By Way Of Construction Of Washrooms 2 Nos And Providing Of Vertical Blinds At Ecsd P Ore, Under Work Code Pddss2022100209 (Construction Of Office Bullding Complex F
Tender Value
10.54 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
21080
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pulwama → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Carrying Out Identified Additional Work For Office Building At Ecsd P Ore, By Way Of Construction Of Washrooms 2 Nos And Providing Of Vertical Blinds At Ecsd P Ore, Under Work Code Pddss2022100209 (Construction Of Office Bullding Complex For Ecsd P Ore)
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipe cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and dispose of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil. |
| 2 | Providing and laying of stone soiling dully hand packed including carriage of stone soling with loading unloading and stacking complete. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Supply and filling of GSB/Quarry material of specified and required size duly handpacked including all carriages complete. |
| 5 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 9 | Centring and shuttering including strutting, propping etc, and removal of form for. Foundations, footings, bases of columns etc. for mass concrete. |
| 10 | Centring and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings balconies and access platforms. |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in superstructure upto floor V-level including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 12 | Cement concrete flooring 1:2:4 (1cement 2 coarse sand. 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50mm thick with 20mm nominal size stone aggregate. |
| 13 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position. KD wood German quality. |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, including black enamelled ISI marked M.S. butt hinges with necessary screws. KD wood German quality. All complete as per direction of Engineer-in-charge (35 mm thick) |
| 15 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. KD wood German quality |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: KD wood German quality.(35 mm thick) |
| 17 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown |
| 18 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by t manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and fixing of sheet of float glass panes of 3.5mm thick including all fittings and fixtures complete. |
| 20 | Providing and fixing Hi-rib Colour Coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required including Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete to Ridges/Valleys plain (500 - 600mm) |
| 21 | 12 mm thick cement plaster in 1:6 (1 cement : 6 coarse sand). |
| 22 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 23 | P/F of 15 mm dia holding down anchor bolts 300 mm long along with nuts for holding of steel trusses. |
| 24 | Providing and Fixing of Door and Window accessories of standard/approved make. |
| 25 | T-Bolt 100 mm |
| 26 | T-Bolt 150 mm |
| 27 | Handles 100 mm |
| 28 | Handles 150 mm. |
| 29 | Demolishing brick work manually/by mechanical means includingstacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar |
| 30 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 31 | Finishing walls with 100% Premium acrylic emulsion paint having VDC less than 50 gms /litre and UV resistance as per IS 15489 2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied 1.43 litre/10 sqm. Over & including priming coat of exterior primer applied 0.90 litre/10 sqm |
| 32 | Sanitary and Plumbing |
| 33 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 34 | Providing / fixing of 4\\" dia PVC pipes (class B) of approved brand. |
| 35 | Providing / fixing of 3\\" dia PVC pipes (class B) of approved brand. |
| 36 | Providing / fixing of Plain bend 100 mm dia of approved brand |
| 37 | Providing / fixing of Door bend 100 mm dia of approved brand |
| 38 | Providing / fixing of 24\\" PVC connection of approved brand |
| 39 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Circular shape 450 mm dia. |
| 40 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 41 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 42 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour: 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms. |
| 43 | Providing / fixing of PVC Floor Trap with Jali of size 110x75x50/40 of approved brand. |
| 44 | Providing / fixing of CP Jali with all fittings complete 100mm dia of approved brand. |
| 45 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. |
| 46 | PN-16 pipe , 20mm OD(SDR-7.4) |
| 47 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work-exposed on wall with clamps at 1.00 meter spacing PN-16 pipe , 25mm OD(SDR-7.4) |
| 48 | Providing/fixing of CP brass wall mixer non-telephonic with CP wall flange, include necessary accessories complete |
| 49 | Providing/fixing of CP brass sink mixer of approved make with C.P. flange including all necessary accessories complete |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support tank |
| 51 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1.4 (1cement 4 coarse sand) for stop cock, with C.L. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 11.53 mox (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) including necessary excavation foundation concrete 1:5:10 (1 cement 5 fine sand 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement: 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design. With common burnt clay (non modular) bricks of class designation 7.5 |
| 52 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. |
| 53 | Providing and fixing of 50 Ltr capacity Geyser of approved brand including all the necessary fittings etc complete |
| 54 | Carriage by MT from source to site of work |
| 55 | Stone Agg 20mm for an average lead of 7 kms. |
| 56 | sand for an average lead of 7 kms. |
| 57 | Providing and fixing of Vertical Blinds with mesh of required size and shape of approved brand to windows including cost of channel mechanism for folding /unfolding all fittings and fixtures complete job as per the directions of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender