Tender For Special Repairs To Govt Md Accn (Offrs) At Tarapore Enclave Qtr No A-101 & A-102 Under Ge Narangi
Tender Value
31.88 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
15 days left
EMD
63770
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Govt Md Accn (Offrs) At Tarapore Enclave Qtr No A-101 & A-102 Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 2 | Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for complete etc all as specified and as directed. |
| 3 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed. |
| 4 | Demolition of brick work /stone masonry masonry built in cement mortar of any description all as specified and directed. |
| 5 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed. |
| 7 | Taking down shutter of any description area exc 1.00 Sqm but not exc 2.00 sqm each etc complete all as specified and as directed. |
| 8 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed. |
| 9 | Demoition of Stone slabs and tiles of any description or thickness in floors, aprons , laid bedded and pointed in any mortar etc complete all as specified and as directed. |
| 10 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed. |
| 11 | Taking up or down 15mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 12 | Taking up or down 20 mm steel tubing and connections incl cleaning for refixing and removal to store etc complete all as specified and as directed. |
| 13 | Dismantling water tanks and removing to store (exc 500 and not exc 1000 ltr capacity) etc complete all as specified and as directed. |
| 14 | Demolition and breaking up drain pipes up to 100 mm dia bofe (Salt glazed ware, AC or Reinforced concrete) set in cement mortar etc complete all as specified and as directed. |
| 15 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and as directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed. |
| 17 | Demolition of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillet) etc complete all as specified and as directed. |
| 18 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed. |
| 19 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 20 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 21 | S&F 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 22 | M&L providing cement concrete type B0 (1:2:4) (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed. |
| 23 | M&L for 75 mm thick cement concrete type D- 2, (1:4:8) (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed. |
| 24 | M&L for cement concrete type B-0 (1:2:4) (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed. |
| 25 | M&L for 75 mm thick PCC (1:3:6), type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 26 | M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed. |
| 27 | M&L for Rendering 10 mm thick in CM (1:3) for backing coat of tiles / dado etc complete all as specified and as directed. |
| 28 | M & L for joint Free Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 29 | M&L Glazed ceramic tiles (Coloured) as in vertical surface 600X1200mmX7 to 9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. |
| 30 | M&L for Virified Ceramic tiles (Drak Shade light shade) 9 to 10 mm thick (square/ rectangular) polished, area of each tiles 600x1200mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 31 | All as per item no. 30 avove but as in vertical surface etc complete all as specified and as directed. |
| 32 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. complete all as specified and as directed. |
| 33 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and as directed. |
| 34 | All as per item No. 33 above but as in skirting /dado / Vertical Surface etc complete all as specified and as directed. |
| 35 | M&L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green marble complete all as specified and as directed. |
| 36 | M & L for heavy duty parking tiles coloured tiles 8 to 9 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 37 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and as directed. |
| 38 | M&L Brickwork (Old size Brick)with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc complete all as specified and as directed. |
| 39 | M&L for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM (1:6) etc complete all as specified and directed. |
| 40 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 41 | M&L for rendering 5mm thick in CM (1:3) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 42 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finsihed even and fair (without using extra cement) etc complete all as specified and as directed. |
| 43 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and fair h (without using extra cement) mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately |
| 44 | Supply only water proofing compound (Liquid) complete all as specified and as directed. |
| 45 | S&F Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 46 | S&F Factory made 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed. |
| 47 | S&F 35mm thick flush shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 48 | M&L Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed. |
| 49 | M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 50 | S&F Providing and fixing factory made power coated uPVC colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories incl door sapng, lever handle, standard cylinder, centre stirker, 3 D hinges, striker, drainag, galzing bridge, silicon sealant etc . (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. |
| 51 | S&F Factory made single extruded WPC (Wood Polymer Composite) coloured solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc complet all a specified and as directed. |
| 52 | S&F in repairs door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed. |
| 53 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 54 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed. |
| 55 | S&F 4mm thick sheet Glass, Ordinary qulatity and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed. |
| 56 | S&F Fancy type Brass barrel tower bolts bolt 200mm long of extruded section etc complete all as specified and as directed. |
| 57 | S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed. |
| 58 | S&F Fancy type Brass handles 150mm long, cast type, anodised etc complete all as specified and as directed. |
| 59 | S&F Fancy type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc complete all as specified and as directed. |
| 60 | S&F Fancy type Brass Door stopper Overall length of cover plate 150 mm long, but of brass body and tongue with hard drawn steel spring etc complete all as specified and as directed |
| 61 | S&F in repairs vitreous China wash down one piece water closet pan (EWC) Italian collection (RENE Starwhite) of size 59cm x 36cm x 71cm,(pedestal pattern),complete series, white, including vitreous China flushing cistern (inbuilt with EWC) & plastic water closet seat white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device incl connection to drain (out going pipe) and to flushing pipe, antisyphonage pipe,etc complete all as specified and directed by Engr-in-charge. Make :- Hindware, Cat No. 92088 (S-30). |
| 62 | S&F in repair Table Top Basin,Size: 500x425x130 mm incl 32 mm dia bore coupling, waste pipe etc ( of Make - FLS-WHT-5935 ( FLORENTINE Series) of Jaquar series incl fixing etc complete all as specified and as directed. |
| 63 | S&F in repairs viterous china squatting pan orrisa pattern of size 580X440 mm white with integral foot rest 'P' trap including connecting to trap incl S trap or P trap and flush pipe anti-symphonage pipe etc complete all as specified and as directed. |
| 64 | S&F in repairs vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 65 | S&F in repairs PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specified and as directed. |
| 66 | S&F in repair Wall Mixer (Queen’s Prime) 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower of Cat PArt no - QQP-7281PM Jaquar series incl fixing etc complete all as specified and as directed. |
| 67 | S&F in repair Central Hole Basin Mixer (Queen’s Prime) with Popup Waste System with 450mm Long Braided Hoses of Cat PArt no - QQP-7169BPM Jaquar series incl fixing etc complete all as specified and as directed. |
| 68 | S&F in repair (Queen’s Prime) Bib Cock with Wall Flange of Cat Part No - QQP-7037PM of Jaquar series incl fixing etc complete all as specified and as directed. |
| 69 | S&F in repair (Queen’s Prime) Angular Stop Cock with Wall Flange of Cat Part No - QQP-7053PM of Jaquar series incl fixing etc complete all as specified and as directed. |
| 70 | S&F in repairs 15mm dai of bore Chromium plate Pillar taps Fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed etc of Cat Part No - P-6808 of Marco series of Prayag etc complete all as specified and as directed. |
| 71 | S&F in repair 15 mm dia bore Hand Shower (Health Faucet) with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook of Cat Part no- ALD-573 of Jaquar series incl fixing etc complete all as specified and as directed. |
| 72 | S&F in bevelled edge looking mirror 8 to 9 mm thick area exc 1.00 sqm but not exc 2.00 sqm mirror of selected quality glass, chromium plated brass screws fixed with 04 nos of Studs with Caps etc complete all as specified and as directed. |
| 73 | S&F in repairs Bib Cock 2 way double handle with CP flange fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc of Cat Part No - P-6812 of Marco series of Prayag etc complete all as specified and as directed. |
| 74 | S&F in repair Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel of Cat Part No - ACN-1181FHS Jaquar series incl fixing etc complete all as specified and as directed. |
| 75 | S&F in repair Single Towel Rail 600mm Long, Stainless Steel of Cat Part No - AKP-35711PS Jaquar series incl fixing etc complete all as specified and as directed. |
| 76 | S&F in repair Towel Ring Square with Round Flange of Cat Part No - CPA-1121 Jaquar series incl fixing etc complete all as specified and as directed. |
| 77 | S&F in repair Toilet Roll Holder with Shelf of Cat Part No - AKP-35757P Jaquar series incl fixing etc complete all as specified and as directed. |
| 78 | S&F in repair W.C. Brush Holder of Cat Part No - ACN-1143N of Jaquar series incl fixing etc complete all as specified and as directed. |
| 79 | S&F in repair Glass Shelf 600mm Long of Cat Part No - AKP-35771P of Jaquar series incl fixing etc complete all as specified and as directed. |
| 80 | S&F in repair Corner Glass Shelf (with Bracket) of Cat Part No - ACN-1173 of Jaquar series incl fixing etc complete all as specified and as directed. |
| 81 | S&F in repair Soap Dish of Cat Part No - AQN-7731 of Jaquar series incl fixing etc complete all as specified and as directed. |
| 82 | S&F in repair Double Coat Hook of Cat Part No - AQN-7761 of Jaquar series incl fixing etc complete all as specified and as directed. |
| 83 | S&F in repair Sink Mixer With Regular Swinging Spout (Wall Mounted Model) With Connecting Legs & Wall Flanges of Cat Part No -ARI-39309 of Jaquar series incl fixing etc complete all as specified and as directed. |
| 84 | S&F in repair 0.85 mm thick stainless steel sink of over all size 510x430x203 and bowl size 430x380x203 incl coupling , waste pipe etc of Cat Part No -PSS-12 of Prayag Kitchen sink incl fixing etc complete all as specified and as directed. |
| 85 | S&F in repairs stainless steel plate rack of 0.63mm thick sheet, size 800mm x 600mm complete all as specified and as directed. |
| 86 | S&F GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 87 | S&F GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 88 | S&F rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed. |
| 89 | S & F in repairs 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. |
| 90 | S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 91 | S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls/floor etc etc complete all as specified and directed. |
| 92 | S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint fixed to walls /Floor etc complete all as specified and directed. |
| 93 | S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed. |
| 94 | S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed. |
| 95 | S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed. |
| 96 | S&F 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 97 | S&F 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 98 | S&F PVC vent cowls of 75mm dia etc complete all as specified and as directed. |
| 99 | S&F 110mm dia bore PVC (SWR) branch pieces, double (double Y) equal or unequal etc complete all as specified and as directed. |
| 100 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed. |
| 101 | M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed. |
| 102 | M&L for preparing newely plastered surface of ceiling and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 103 | M&L for preparing Old surface of ceiling and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 104 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 105 | M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 106 | M&L for preparation old plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces etc complete all as specified and as directed. |
| 107 | All as per item No. 106 above but new plastered wall surfaces complete all as specified and directed. |
| 108 | M&L Cutting chases, pinning in, making good to facingsin brick walls where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed pipe line etc. and making good, cutting exceeding 20cm girth etc complete all a specified and as directed. |
| 109 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed. |
| 110 | S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed. |
| 111 | M&L for screed bed 10 mm thick in CM (1:3) mixed with water proofing compound to receive roof treatment etc complete all as specified and as directed. Notes: WPC shall be measured and paid seperately under relevant item |
| 112 | M&L for removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017, 3mm thick and weighing not less than 3.00kg/Sqm reinforced with non woven polyster/HMHDPE matt black finished over compatible primer @ 0.30 Litr/Sqm and torch applications of membrane with 100mm side overlap and 150mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of aluminium paint on top @ 0.10 litre/sqm incl taking down existing HP tiles or any other treatment etc complete all as specified and as directed. |
| 113 | M&L for providing water proofing treatment to sunken portion of WCs, bathroom etc by applying cement slurry mixed with two component Elastomeric Acrylic based polymer modified cementitious composite compound coating. incl taking down existing treatment incl PCC as in sunken protion of WC and removing beyond the premises of site. The following procedures to be adopted during the execution of work :-(i) First layer of slurry of cement @ 0.488 kg/sqm mixed with Acrylic based polymer modified cementitious composite compound @ 0.253 kg/sqm. The layer will be allowed to air cure for 4 hours. (ii) Second layer of slurry of cement @ 0.242 kg/sqm mixed with with Acrylic based polymer modified cementitious composite compound @ 0.126 kg/sqm. The layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. (iii) 20mm thick screed in cement mortar (1:3) mixed with liquid water proofing compound. (iv) Provide 40mm dia light grade GI spout at the lowest point with 30cm projection beyond the out face of the wall. (v) Cement concrete (1:5:10) type E-2 using 20mm granded brick aggregates as in sunken portion of WC |
| 114 | S&F in reapirs 18mm thick Block boards, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in wall panelling / cub board shutter, Kitchen shelves and modular kitchen shutter, shelves, drawers etc over 0.90 mm thick decorative laminate type 1, of surface finish (both side of shutter), colour and pattern as approved, fixed with approved adhesive as per maker's instructions etc complete all as specified and as directed. |
| 115 | S&F in repairs stainless steel kitchen basket in various type of baskets susch as plaint basket height 4\\", Thali basket 8\\" height, Cup saucer basket 4\\" heigt, and perforated cutlury basket 4\\" height all as specified and directed. |
| 116 | S&F in repairs Stainless steel channel for basket sizes 600mm long and 46mm wide all as specified and directed. |
| 117 | S&F in repiars Stainless steel auto closing concealed hinges 9.5 cranks for half overlay doors with opening angle 95* (14-32mm) with integrated overlay adjustment + 2.50mm & depth adjustment 4mm complete all as specified. |
| 118 | S&F in repairs 200mm size powder coated Stainless steel handle fit to modular section etc complete all as specified and as directed. |
| 119 | M&L for Hardcore of gauge n exc. 63 mm of broken stone or boulders, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface etc all as specified and as directed. |
| 120 | M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and directed. |
| 121 | M&L for Rubber Moulded glossy finished pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade, ISI approved to match with grey cement and pigment etc complete all as specified and as directed. |
| 122 | M&L for plain cement concrete (1:4:8) type D-2, with using 40 mm grades stone aggregates as in foundations and mass concrete etc complete all as specified and as directed. |
| 123 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) etc complete all as specified and as directed. |
| 124 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 125 | M&L for providing plain cement concrete (1:2:4) type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 126 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 127 | M&L for laying of PVC (SWR) 150 mm (Internal dia of pipes) single socketed, in any length with rubber ring joints, laid in trenches or in floors etc etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed. |
| 128 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 129 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed. |
| 130 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed. |
| 131 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. etc complete all as specified and as directed. |
| 132 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed et complete all as specified and as directed. |
| 133 | Taking down carefully aluminium/ copper point wiring for light/fan/ socket/bell or power point incl. All fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete removing materials to store for keeping in safe custody site or handed over to contractor as schedule of credit and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge. |
| 134 | Taking down ceiling/exhaust/wall fan including connection wires carefully and deposit to MES store in safe custody all as directed by Engineer-in-Charge. |
| 135 | Taking down old unservicable geyser including connection wires carefully and depositing to MES store after complete all as directed by Engineer-in-Charge. |
| 136 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed. |
| 137 | All as per item serial No.136 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches. |
| 138 | All as per item serial No.136 here-in-before but One socket outlet 3 pin 6 Amp on independent board. |
| 139 | All as per item No.136 here-in-before but One bell/buzzer point controlled by one push button on the same board with other switches or independent with cables complete all as directed. |
| 140 | All as per item serial No.136 here-in-before but with 2.5 Sqmm single core multistranded copper conductor cable for 6 pin 15 Amp socket outlet on independent board and earth continuity wire with 2.5 sqmm cable. |
| 141 | S&F switch modular type 6 Amp 240 Volts single one way (ISI marked). |
| 142 | S&F modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 143 | S&F modular switch 1 way 16 amp, 1 module complete all as specified and as directed. |
| 144 | S&F modular socket, 16 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 145 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 146 | Supply and fix modular lamp holder ,PVC/Polycarbonate type with back plate suitable for batten fittings. |
| 147 | S&F Buzzer, Ding Dong AC. 230 volts,single pole complete all as directed. |
| 148 | S&F modular Bell push switch, 5 Amps 230 volt complete all as directed. |
| 149 | S&F modular stepped type electronic fan regulator, two module size, flush type complete all as directed. |
| 150 | S& F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 V complete all as directed. |
| 151 | Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 152 | Supply and fixing in repair LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 153 | S & F in repair LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 154 | S&F in repair wall decorative fixtures in durable body and designer mesh in gold finish suitable for 9W LED lamp of B22, including lamp of 9watt complete all as specified and directed. (Make -Havells, cat no-LHFOECE1T1B014) |
| 155 | S&F in repair for factory made, sheet steel distribution boards, TPN, 4 Way, double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 156 | S&F in repair/replacement MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. |
| 157 | S&F in repair/replacement MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 158 | Supply & fix in repair/replacement MCCB DB IP-43 of sheet metal enclosure double door VTPN 4 way with 250 Amps rated copper bus bar 415 volt and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate complete all as specified and directed. |
| 159 | S&F in repair/replacement MCCB four pole 100A, Icu 16KA, thermal magnetic, 415v AC complete all as specified and as directed. |
| 160 | Supply and fixing ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 161 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep, 1400 rpm with blades, and frame and louvers complete all as specified and directed. |
| 162 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 163 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009. |
| 164 | Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypower Fero Glas caoting Technology for inner container and Heavy Duty seamless Incoloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warrenty on product and 5 years warranty on inner container. Make: Havells Puro or equivalent model in Bajaj/Usha. |
| 165 | S&F in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 166 | M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 167 | Supply and lay GI tubing 40 mm bore light grade for cable protection and fixing to the existing pole with flat iron clamp 25x 3mm including nut bolts complete all as directed. |
| 168 | M&L for wiring with 4 runs of 6 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith Two run of 6 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old wiring and type of conduit complete all as specified and directed. Note: 4 run of 6 Sqmm cable and 2 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 169 | M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dia non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 170 | S& F steel tubes medium grade galvanised 25 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed. |
| 171 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 25mm bore complete all as specified and directed. |
| 172 | Cutting existing steel tubing of 40mm for alterations or additions complete all as directed by engineer-in-charge. |
| 173 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 174 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed. |
| 175 | M&L for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified. |
| 176 | Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
| 177 | Removing of excavated soil not exc 50cm & depositing where as directed at a level n.exc 1.5m above starting point complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender