Tender For Special Repair Of Hard Standing In Mt Area At 4 Para (Sf) And Other Sanction Work Under Ge (South) Udh Ur
Tender Value
43.93 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
12 days left
EMD
88000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Reasi → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair Of Hard Standing In Mt Area At 4 Para (Sf) And Other Sanction Work Under Ge (South) Udh Ur
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : SPL RAPAIR OF HARD STANDING IN MT AREA AT 4 PARA (SF) AND OTHER SANCTION WORK UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-113/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all specified and directed by Engr-in-charge. |
| 3 | Excavation in post holes or similar holes each n exc 0.5 cum getting out in any type of soil all specified and directed by Engr-in-charge. (Dimension .450x.450x.800) |
| 4 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all specified and directed by Engr-in-charge. |
| 5 | M&L for PCC type B2(1:2:4), using 20mm graded crushed aggregate as mass conc and filling of foundation all specified and directed by Engr-in-charge. |
| 6 | S&F Joist, channel, angle, or tee section, fixed independently, without connecting plates, etc; complete conforming to Fe-290 all specified and directed by Engr-in-charge. (dim 50x50x6) |
| 7 | Fixing only chain link fencing including line wire fixing, any type of standards rail, straining bolts etc. including provision of binding wire, 3.15 mm dia of wire, mesh size 50mm X 50 mm all specified and directed by Engr-in-charge. |
| 8 | Supply only Chain link MS galvanised fencing wire 3 mm dia & 50x50mm mesh all specified and directed by Engr-in-charge. |
| 9 | S&F flat iron (50mmx5mm) for fencing of chain link fencing tying of chain link fencing including necessary drilling holes for nut bolts all specified and directed by Engr-in-charge. |
| 10 | S&F Mild steel rag or lewis bolts, screwed one end, with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, n exc 15 cm long all specified and directed by Engr-in-charge. |
| 11 | S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for chain link fencing complete all specified and directed by Engr-in-charge. |
| 12 | M&L for two coats of synthetic enamel paint over one coat of red oxide Zinc chrome on new steel surfaces of any description exc 10cm in width or girth including preparation of surfaces all specified and directed by Engr-in-charge. |
| 13 | M&L for Galvanised 2 stand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standred rails, straining bolts all specified and directed by Engr-in-charge. |
| 14 | Supply and fixing in repairs for concertina coil 2.64mm dia and 600 mm dia 10 m openable length (Total length 90 m) having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Pt-I) with a low carbon steel strip punched tape 19mm wide, 0.5mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both the sides of strips at regular interval confirming to IS-513 complete all specified and directed by Engr-in-charge. |
| 15 | Material and labour for 100mm thick plain cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all specified and directed by Engr-in-charge. |
| 16 | Material and labour for sand filling as a cushioning/ bedding complete all specified and directed by Engr-in-charge. |
| 17 | Material and labour for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness M-50 Grade, with grey cement and pigment complete all specified and directed by Engr-in-charge. |
| 18 | M&L Providing cement concrete 1:2:4 mix type B-0 (12.5mm graded aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all specified and directed by Engr-in-charge. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender