Tender For Tender For The Supply, Installation, Integration, Testing And Commissioning Of Lights, Light Accessories, Grip Equipment And Allied Studio Equipment For The Cinematography And Allied Sections Of The Tamil Nadu Government M.G.R. Film And Te

Sharing tender

Tender for Tender For The Supply, Installation, Integration, Testing And Commissioning Of Lights, Light Accessories, Grip Equipment And Allied Studio Equipment For The Cinematography And Allied Sections Of The Tamil Nadu Government M.G.R. Film And Television Institute, On Academic Pricing On Turnkey Basis, Together With Comprehensive Onsite Warranty , Photography Flash Units , Godox V1 Pro N Speedlight (Nikon):76 Ws | Round Head, Zoom 28-105 Mm Auto/Manual | Flash Duration 1/300-1/20,000 S | Nikon I-Ttl And Manual, Feb ±3 Ev In 1/3 Steps, Fel | Hss To 1/8000 S, 1St/2Nd-Curtain Sync | Multi-Flash Up To 100 Times At 199 Hz | 2.4 G Radio Tx/Rx, ≈100 M, 32 Channels 01-32, Id Off/01-99, Tx Groups A-D, Controllable Receivers A-E | Head Swing 0-330° H, −7°-120° V | Led Modelling Lamp 2 W, 3300 K ±200 K, 10 Levels | Li-Ion 7.2 V/2980 Mah, Recycle ≈1.3 S, ≈500 Full-Power Pops | Af Assist 0.6-10 M Centre, 0.6-5 M Periphery | Su-1 Detachable Fill Light | Pb960 Port | Usb-C / Vc26 Charging , Godox Ad600 Pro Studio Strobe: 600 Ws Studio Strobe | Guide Number 87 M (Iso 100, With Standard High-Efficiency Reflector) | Recycle 0.9 S At Full Power | Hss To 1/8000 S, First/Second-Curtain Sync, Multi-Flash | Built-In Godox 2.4 G X System | Ttl For Canon/Nikon/Sony/Fujifilm/Olympus/Panasonic | 3.5 Mm Sync Jack | Ttl Wireless Receiver Only. 28.3V/2600 Mah Battery & Av Via Ac26. , Godox Qt600iiim Igbt Studio Strobe:600 Ws Quicker Studio Monolight | Guide Number 76 M (Iso 100, Standard Reflector) | Flash Duration T0.1 1/530-1/26,100 S, 1/530-1/6,010 S In High-Speed Mode | Recycle 0.01-0.9 S | Output 1/1-1/256, Hss 1/4-1/256 | Colour 5600 K ±200 K Stable Mode, 5400-9500 K High-Speed, 4600-5000 K Hss | 40 W Led Modelling Lamp 1-100 % | Hss To 1/8000 S, First And Second-Curtain Sync, S1/S2 Slave, Multi-Flash 99 Frames At 30 Hz | Delay 0.01-30 S, Mask Function | 2.4 G X Wireless, 32 Channels, Id 01-99, 16 Groups, 50 M Range | 100-240 V~ 50/60 Hz, −10 To 50 °C | 392×176×143 Mm, 3.33 Kg | Bowens Mount , Godox X3 N Wireless Trigger (Nikon Version): Touchscreen Ttl Wireless Trigger For Nikon I-Ttl Cameras | 2.4 Ghz Godox X System, 32 Channels, Wireless Id Off/01-99, Groups A-F And 0-9 | Transmission Range 0-100 M | Ttl, Manual And Multi Flash, Hss, Front And Rear-Curtain Sync | Flash Exposure Compensation ±3 Ev In 1/3 Ev Steps | Zoom Auto, Focal Length 24-200 Mm | Two-Way Tcm Conversion Between Ttl And Manual | Built-In Lithium Battery 3.7 V≡850 Mah, Usb-C Charge 0-100 % In ≈7 Days | ≈6,600 Flashes At 1,200 Triggers/Day Over 5 Days; Up To 10,000 Flashes At 1 Flash/3 S | Firmware Upgrade Via Usb-C | 1.61″×1.85″×1.54″, ≈48 G , Speedlight Batteries & Chargers , Godox Vb30 Li-Ion Battery For V1 Pro Flash: Rechargeable Lithium-Ion Pack For The Godox V1 Pro / V1 Pro N Round-Head Flash | 7.2 V, 2,980 Mah | Lithium-Ion Chemistry | Charged In The Flash Or By The Original Vc26 Charger, With Type-C Charging Also Supported On The V1 Pro | Supplies ≈500 Full-Power Pops Per Charge In The 76 Ws V1 Pro At ≈1.3 S Recycle | Charges Alongside Two Further Packs On The Three-Bay Vc26t Multi Battery Charger | Shared Pack Interface With The V1 And V100 Speedlight Batteries , Godox Vc26t Triple Battery Charger (For Vb26/Vb30): Multi Battery Charger With Three Charge Bays | Charges Up To Three Lithium Battery Packs Of The Godox V1, V1 Pro And V100 Speedlights Simultaneously | Ac Mains Powered | Multi-Pack Turnaround For Sustained Shooting | Charges The 7.2 V Packs That Give ≈480 Full-Power Pops In The V1 (2,600 Mah) And ≈500 In The V1 Pro (2,980 Mah) | Complements The Type-C Charging Option Of The V1 Pro | Accepts The Vb26 And Vb30 Packs Of The V1 / V1 Pro / V100 Heads , Portable & Mini Led Lights , Godox C7r Rgbww Bulb - 8-Light Charging Kit (E27, C7r-K8b) Or Nanlite Pavobulb 10C (2X 4-Light Kits): Rgbww Creative Led Bulb, E27 Base, Supplied As The Eight-Light Charging Kit C7r-K8b (E26 Version C7r-K8a) | 7 W, 101 Lux @1 M At 5500 K | Cct 2000-10,000 K With Magenta-Green Adjustment | Rgbww Colour Mixing | Cri ≥96, Tlci ≥97 | Constant Power Design For Stable Lighting | On-Board Control And Godox Light App Control Via Bluetooth | Power Via Ac Lamp Socket, 5 V/2.5 A Type-C Dc Charging Or Built-In Battery | 73×73×136 Mm, 256 G | Kit: 8 Light Bodies, 8 Cr-B01 Round Cup Bouncers, C7r Eight-Light Charging Case, 1.5 M Charging Case Power Cord, 2 Bouncer Storage Bags, 2 Type-C Cables , Rgbww Led Panel Lights , Nanlite Pavoslim 60C 1X1 Rgbww Panel Or Godox Ldx100r Rgb Led Panel:72 W Rgbww 1X1 Panel | Input Dc (Battery) 14.4-26 V, Dc 7.4 V×2, Ac 100-240 V 50/60 Hz | Cct 2700-7500 K, G/M ±150 | Cri Avg 96, Tlci 97, Tm-30 Rf 94/Rg 100, Ssi 83 At 3200 K / 74 At 5600 K | Dimming 0-100 % | On-Board, Remote, Nanlink App, Lumenradio Crmx, Dmx/Rdm Control | Fixture 306.3×300.65×18.6 Mm, Control Unit 146.45×111.48×175 Mm | 0.94 Kg Fixture + 1.37 Kg Control Unit | 5600 K Bare 24,900 Lux @0.5 M / 7,074 @1 M / 849 @3 M; With Softbox And Lite Diffuser 12,360 / 3,034 / 349 Lux | Bis/Ce/Ukca/Pse/Kcc , Godox P600r Rgbww Led Panel (1X2) Or Nanlux Dyno 650C Rgbw Led Panel:600 W (Godox P600r) / 650 W (Nanlux Dyno 650C) Full-Colour 1X2 Ft Panel | 100-240 V~ 50/60 Hz 7 A Or Dc 48 V | Cct 1800-10,000 K, G/M −100 % To +100 % | Dimming 0-100 %, Linear/S/Exponential/Log Curves | Cri Avg ≥96, Tlci Avg ≥96, Cqs ≥95 | Dmx512 + Rdm, Lumenradio Crmx, Ethernet Art-Net And Sacn, Bluetooth App, On-Board | Bluetooth ≤30 M | Usb-A 5 V 1.5 A Firmware | −20...45 °C | Luminance 3,230 Lux @3 M At 5600 K | 8 Pixel Zones, Colour Spaces Rec.2020, Dci-P3, Rec.709 | 776×567×153 Mm | ≈17.8 Kg , Nanlite Pavoslim 240C 2X2 Rgbww Panel Or Godox P600r Hard Rgb Panel: 240 W Rgbww 2X2 Panel (Pavoslim 240C) / 600 W (Godox P600r Hard) | Ac 100-240 V 50/60 Hz, Dc 48 V/5.6 A, Dc (Battery) 14.4-26 V | Cct 2700-7500 K, G/M ±150 | Cri 96, Tlci 97, Tm-30 Rf 94/Rg 100, Ssi 83/74, Dimming 0-100 % | On-Board, Remote, Dmx/Rdm, Lumenradio Crmx, Nanlink App | Unfolded 608.7×602.1×28.6 Mm, Folded 318.4×602.1×38.2 Mm; Control Unit 152.6×111.5×283 Mm | 3.65 Kg + 2.76 Kg | Shipped With Softbox And Lite Diffuser | Bis/Ce/Ukca/Pse/Kcc/Fcc-Id , Godox Am800r Inflatable Mat Light (4X4): 800 W Full-Colour Inflatable Mat Light, 4′×4′ | Cct 1800-10,000 K, G/M −100 % To +100 % | Cri ≈96, Tlci ≈98 | Ac Powered | Crmx, Ethernet, Dmx, App And On-Board Control | Ip65 Light Body And Controller | Inflates In 1 Minute And Holds Shape 15 Days, No Truss Needed | Floor Or Boom Mounting On A Foldable U-Bracket | Bare Light Body 1200×1200 Mm, 4.95 Kg; Controller 315×180×140 Mm, 6.40 Kg | Kit: Am44r Light Body, Am800r Controller, Inflatable Butterfly Frame Af44, Folding Yoke Amy44, Grid Af44g, Diffusion Fabrics D11-32, D13-30 And D11-32+, Air Pump, Repair Kit, Flight Case And Built-In 8 M Dc Cable , Godox P1200r Panel With Accessories Kit: 1500 W Max Full-Colour Panel | 100-240 V~ 50/60 Hz | Cct 1800-10,000 K, G/M ±100 % | Dimming 0-100 %, Linear/S/Exponential/Log Curves | Cri ≥96, Tlci ≥98 | Dmx512 + Rdm, Lumenradio Crmx, Bluetooth App, On-Board | Bluetooth 30 M | Usb-A 5 V 1.5 A | −20...45 °C | 834×606×170 Mm Incl. U-Bracket | ≈18.5 Kg | Catalogue Figures For The P1200r Hard P8: 1400 W, 20,000 Lux @3 M At 5600 K, Cri ≈97 / Tlci ≈98 / Tm-30 Rf ≈95, 8 Pixel Zones, 737×151×385 Mm, 17.6 Kg, Ip65 , Bowens S Mount Cob Led Spotlights , Nanlite Fc-720C Rgbw Cob Spotlight (Bowens S Mount) Or Godox M600r Rgb Led Monolight:720 W Rgbw Cob Monolight | 100-240 V~ 50/60 Hz | Cct 1800-10,000 K, G/M ±100 % | Dimming 0-100 %, 4 Curves | Cri ≥96, Tlci ≥96, Cqs ≥95 | Dmx512 + Rdm, Lumenradio Crmx, Ethernet Art-Net And Sacn, Bluetooth, On-Board | Bluetooth 40 M | Usb-A 5 V 1.5 A | −20...45 °C | Body 317×501×347 Mm Incl. U-Yoke And Reflector, 10 Kg; Controller 189×166×334 Mm, 6 Kg | Bowens Mount | Ip54 | 136,000 Lux @1 M With Br45 Reflector , High-Power Point Source (Cob) , Godox Mg1200bi Bi-Color Cob (G-Mount) Or Nanlux Evoke 1200B Bi-Color Spot Light:1200 W Across All Ccts | Cct 2800-6500 K | Cqs ≥94, Cri ≥96, Tlci ≥96, R15 ≥92, Tm-30 Rf ≥92 | 0.1 % Stepless Dimming, 4 Dimming Curves, 11 Fx | Dmx And Rdm, Lumenradio Crmx, Ethernet Sacn/Art-Net, App, 2.4 Ghz Remote, On-Board And Removable Panel | G-Mount | Ip65 | 360° Rotatable U-Type Yoke | 86,100 Lux @3 M With Fresnel | 8 M Power And Connecting Cord | G-Mount Ecosystem Reflectors Gr15/Gr30/Gr45/Gr60 And Projection Attachment Gp26k , Godox Mg4k Bi-Color Cob (G-Mount, 4K Hmi Class) Or Nanlux Evoke 2400B Bi-Color Cob: Bi-Colour Cob, 4K Hmi Class | Ac 100 V 60 Hz 2300 W / 240 V 50 Hz 2260 W | Cct 2800-10,000 K, G/M ±100 % | Dimming 0.0-100.0 %, Linear/S/Exp/Log | 11 Fx | Cri ≈97, Tlci ≈98 | Ip65 | Wireless Or Wired Dmx/Rdm, Crmx, Ethernet, Bluetooth, Controller | Bluetooth 60 M | Usb-A 5 V 1.5 A | −20...45 °C | Light Body 265×339×300 Mm, 10 Kg; Controller 238×177×330 Mm, 6.4 Kg | 63 Mm Emitting Area | 110 Lm/W | 124,000 Lux @5 M 5600 K With Mgr15, 25,600 Lux @5 M With Mgr30 | 18.9 Kg Full Setup , Nanlux Evoke 5000B Bi-Color Cob (Flight Case) Or Godox Mg2400bi Bi-Color Led Monolight: 5000 W Draw At 200-240 V, 5200 W At 100-125 V | Cct 2700-6500 K, G/M ±80 | 57,000 Lux @5 M At 5600 K With 30° Reflector, ≈9 Kw Hmi / 24 Kw Tungsten Equivalent | Ip66 | Magnesium Alloy | 45 Kg With Yoke | All-In-One Head, Control And Psu On One Cable | 95° Beam Angle | Nl-Mount With Double-Mechanism (Active Press + Anti-Loosening) | Dmx/Rdm On 2× 5-Pin Xlr, Art-Net/Sacn On 2× Lan, Lumenradio Crmx Timotwo, Nanlink App 2.0 Bluetooth, 2.4 G Remote, Wc-Ext Wired Controller | 4.3″ Display, 3 Knobs/4 Buttons | Fan Modes Smart/High/Low/Off, 44 Db(A) Smart-Mode Average | Takes Most Evoke 2400B Optics , Rgbww Led Tube Lights , Nanlite Pavotube Ii 30Xr 4Ft 4-Light Kit Or Godox Tp4r-K4 Pixel Rgb Tube 4-Light Kit: 70 W Rgbww Pixel Tube, 4 Ft | Dc 15 V/4 A Max, Ac 100-240 V 50/60 Hz | Cri 97, Tlci 98 | Cct 2700-12,000 K, G/M Adjustable | Dimming 0-100 % | On-Board, Remote, Nanlink, Dmx/Rdm, Lumenradio Crmx On Xr Models | 14 Effects Plus Pixel Effects: Multi-Colour, Fade, Scroll, Rainbow (Process/Fire/Driving Via App) | Φ43×1145 Mm | 1.58 Kg Fixture + 0.27 Kg 15 V/4 A Adapter + 0.05 Kg 3 M Cable | 5600 K 746 Lux @1 M / 189 @2 M / 84 @3 M , Godox Tp2r-K4 Rgbww Pixel Tube 2Ft (4-Light Kit) Or Nanlite Pavotube Ii 15Xr 2Ft 4-Light Kit: 35 W Rgbww Pixel Tube, 2 Ft, Supplied As 4-Light Kit | Dc 15 V/2 A Max, Ac 100-240 V 50/60 Hz | Cri 97, Tlci 98 | Cct 2700-12,000 K, G/M Adjustable | Dimming 0-100 % | On-Board, Remote, Nanlink, Dmx/Rdm, Lumenradio Crmx On Xr Models | 14 Effects Plus Pixel Effects: Multi-Colour, Fade, Scroll, Rainbow | Φ43×600 Mm | 0.82 Kg Fixture + 0.2 Kg Adapter | 5600 K 377 Lux @1 M / 94 @2 M , Compact Cob Light (Kit) , Godox Ms60r Full-Color Cob (2-Light Kit) Or Nanlite Forza 60C (2X Singles):Full-Colour Cob Point Source, 2-Light Kit | Li-Ion 14.4 V, 3400 Mah, 48.96 Wh, Runtime ≈45 Min At 100 %, Charge ≈2 H 15 Min | Usb-C Input 5 V/3 A, 9 V/3 A, 12 V/2.5 A, 20 V/1.5 A (20 V 3 A, Max 60 W) | Cct 1800-10,000 K, Gm ±100 % | Dimming 0-100 %, Linear/S/Exp/Log | 14 Fx | Cri Avg ≥95, Tlci Avg ≥95 | Dmx512 + Rdm, Lumenradio Crmx, Bluetooth App | Bluetooth 60 M | Modes Cct/Rgbw/Hsi/Xy/Gel/Fx | Magnetic Mount | −20...40 °C | ≈77×77×91 Mm | ≈311 G , Cine Lighting Reflector (Liteflow) , Godox Liteflow Cine Reflector Kit (Liteflow 7 / 15 / 25): Cine Lighting Reflector System In Five Sizes: Liteflow 7 (7×7 Cm), Liteflow 15 (15×15 Cm), Liteflow 25 (25×25 Cm), Liteflow 50 (50×50 Cm), Liteflow 100 (100×100 Cm) | High Reflectance With Only 3 % Power Loss | Four Diffusion Types D1/D2/D3/D4 Per Size | Rail Structure With Guide Slot For Seamless Installation | Liteflow 7, 15 And 25 Kits Each Hold Four Diffusion Panels With Soft Case Sc13, Sc14 And Sc15 | Liteflow 50 Kit With Sc16 | Liteflow 100 K1 With D1, D2, D3, D4 Panels, Yokes And Flight Case Fc04 | Options: Rail Mount Wmr And Wms, Rods Rs25-Rs100, Grip Kits Gk7/Gk25/Gk50, Safety Wire Sw01 Rated 1 Kg , Dimmer , 5K Dimmer (Mains Dimming For Practical Fixtures): 5 Kw Mains Dimmer For Practical Fixtures | 5000 W / 20 A Single-Channel Load Capacity On 200-240 V Ac 50/60 Hz | 32 A Cee17 Inlet And Outlet | C-Type Thermal-Magnetic Mcb Protection | Rotary Manual Level Control With 0-10 Scale | Flash Button | Load-Detect And Power-Connected Indicators | Locking Pin Prevents Accidental Mains Disconnection | Wire Handle For Carrying Or Hanging On A Stand | Free-Standing Location And Studio Use For Dimming In-Frame Practicals | 335×160×112 Mm, 3.15 Kg , Nanlite Pavoslim Panel Accessories , Nanlite Pavoslim 60C Pop-Up Softbox (Included) Or Godox Ldx100r Softbox (Included): Pop-Up Softbox Supplied With The Nanlite Pavoslim 60C 1×1 Rgbww Panel And Used With The Included Lite Diffuser | 5600 K With Softbox And Lite Diffuser: 12,360 Lux @0.5 M, 3,034 Lux @1 M, 349 Lux @3 M | Panel 72 W, Ac 100-240 V 50/60 Hz Or 14.4-26 V Dc Battery | Cct 2700-7500 K, G/M ±150 | Cri Avg 96, Tlci 97, Tm-30 Rf 94/Rg 100 | Dimming 0-100 % | On-Board, Remote, Nanlink App, Lumenradio Crmx And Dmx/Rdm Control | Panel 306.3×300.65×18.6 Mm, 0.94 Kg | Control Unit 146.45×111.48×175 Mm | Panels Ship With Softbox, Diffusers, Eggcrate And Carrying Bag , Nanlite Pavoslim 240C Folding Softbox (Included) Or Godox P600r-Hard Softbox (Included):Folding Softbox Included With The Nanlite Pavoslim 240C 2×2 Rgbww Panel | Panel 260 W, Ac 100-240 V 50/60 Hz, Dc 48 V/5.6 A Or 14.4-26 V Battery | Cct 2700-7500 K, G/M ±150 | Cri Avg 96, Tlci 97, Tm-30 Rf 94/Rg 100 | Gel, Hsi, Rgbw And 15 Effect Modes | Light Only 24,970 Lux @1 M At 5600 K; With Softbox And Lite Diffuser 12,010 Lux @1 M, 36,140 Lux @0.5 M, 1,533 Lux @3 M | Unfolded 608.7×602.1×28.6 Mm, Folded 318.4×602.1×38.2 Mm | Fixture 3.65 Kg, Control Unit 2.76 Kg | Kit: Panel, Control Unit, Quick Release Clamp, Baby Pin Holder, Cables, Softbox, 2 Diffusers, Eggcrate And Carrying Bag , Nanlite Pavoslim Swivel Holder + Baby-Pin Holder (Included, Per Panel) Or Godox Ldx/P-Series Equivalent Mount (Included): Universal Swivel Holder And Baby Pin Holder Supplied With Each Nanlite Pavoslim Panel | Mounting Sockets Along The Panel Fold Combine With The Universal Or Baby Pin Holder To Lock The Fixture Securely When Unfolded | Pavoslim 240C Kit Includes Universal Holder, Quick Release Clamp And Baby Pin Holder; The 240B Kit Includes The Universal Holder | Quick Release Clamp Mounts To Light Stands Or Truss, And The Control Unit Carries A Strap For Hanging | For The Pavoslim 240C 2×2 Panel (608.7×602.1×28.6 Mm Unfolded, 3.65 Kg) And The Pavoslim 60C 1×1 Panel (306.3×300.65×18.6 Mm, 0.94 Kg) , Nanlite Magnetic Mounting Adapters (As-Mba-1/4-Set) Or Godox Ldx-Series Magnetic Mount Equivalent: Magnetic Base Adaptor With 1/4″-20 Thread For The Nanlite Pavoslim Series, Set As-Mba-1/4-Set | Screws Into The Multiple 1/4″-20 Sockets On The Rear Of Each Pavoslim 240B/240C Fixture | Magnetic Fixing Holds The Panel On Ferromagnetic Surfaces For Tool-Free Rigging In Confined Positions | Alternative To The Universal Holder, Quick Release Clamp And Baby Pin Holder Supplied With The Panels | Suits The Pavoslim 60C 1×1 Panel (306.3×300.65×18.6 Mm, 0.94 Kg) And The Pavoslim 240C 2×2 Panel (608.7×602.1×28.6 Mm, 3.65 Kg) , Godox P600r Panel Accessories , Godox P600r Barndoor (P600rb4) + Honeycomb Grid (P600rh30) Or Nanlux Dyno 650C Barndoor + Grid: P600rb4 Four-Leaf Barndoor And P600rh30 30° Honeycomb Grid, Optional Accessories For The Godox P600r Panel | Barndoor Flags And Shapes Output, Honeycomb Narrows Beam Spread To 30° | For The P600r 700 W Full-Colour Panel: 100-240 V~ 50/60 Hz, Cct 1800-10,000 K, G/M ±100 %, 0-100 % Dimming With Linear/S/Exponential/Log Curves, Cri ≥96, Tlci ≥96, Dmx512 And Rdm, Lumenradio Crmx, Ethernet Art-Net And Sacn, Bluetooth App Control, 776×567×153 Mm, ≈17.8 Kg , Godox P600r Space Light Softbox (P600bhss) + Rectangular Softbox (P600rs34) With Grid (P600rs34g) Or Nanlux Dyno Equivalents: P600bhss Space Light Softbox, P600rs34 Rectangular Softbox And P600rs34g Grid For The Godox P600r Panel, From The P600r Optional Accessory Range | Space Light Gives Omnidirectional Soft Fill, Rectangular Softbox With Grid Shapes Directional Key Light | P600r Panel: 700 W Max, 100-240 V~ 50/60 Hz, Cct 1800-10,000 K, Cri ≥96, Tlci ≥96, 776×567×153 Mm, ≈17.8 Kg | P1200r Hard 1500 W Max Panel: Cri ≥96, Tlci ≥98, 834×606×170 Mm With U-Bracket | Also Catalogued: P600rs23 2′×3′ Softbox With Grid And P600ro5 5′ Octa Softbox With Grid , Godox Multi-Header Mounting Bracket (Ab02-3 / Ab03-3 / Ab04-3) Or Nanlux Dyno-Series Equivalent: Multi-Header Mounting Brackets For Godox Knowled Panels: Ab02 2-Light Bracket, Ab02-3 2-Lights Bracket, Ab03-3 3-Lights Bracket And Ab04-3 4-Lights Bracket | Ab02 And Ab04 Appear In The P300r Optional Accessory Range For Arraying Heads On One Stand | Matching Softboxes Ab02s23 2′×3′ For Ab02 And Ab04s33 3′×3′ For Ab04 | For Godox P300r And P600r Panels (P600r: 700 W, 100-240 V~ 50/60 Hz, Cct 1800-10,000 K, Cri ≥96, Tlci ≥96, 776×567×153 Mm, ≈17.8 Kg) , Godox P.O. Yoke (P600ry02) / Double Vertical Yoke (P600ry03) Or Nanlux Dyno-Series Yokes: P600ry02 P.O. Yoke And P600ry03 Double Vertical Yoke, Optional Yoke Accessories For The Godox P600r Panel, With P300ry02 And P300ry03 For The P300r | Stage And Studio Yoke Mounting On Standard Lighting Stands | For The P600r 700 W Full-Colour Panel: 100-240 V~ 50/60 Hz, Cct 1800-10,000 K, G/M ±100 %, Cri ≥96, Tlci ≥96, 0-100 % Dimming With Four Curves, Dmx512 And Rdm, Crmx, Ethernet Art-Net And Sacn, Bluetooth App, 776×567×153 Mm, ≈17.8 Kg , Nanlite Bowens S Modifiers (Fc-720C) , Nanlite 90Cm Parabolic Softbox With Grid (Bowens S) Or Godox Bowens Parabolic Softbox With Grid: Sb-Pr-90-Q Quick-Release Parabolic Softbox, 90 Cm (35″), 16-Sided Hexadecagon With 16 Support Rods And A Bowens Quick-Release Speed Ring | Silver-Plated Interior | 1-Stop And 2-Stop Front Diffusers | Supplied With Grid | For Bowens S-Mount Fixtures Such As The Godox M600r 720 W Cob: Bowens Mount, Ip54, Cri ≥96, Tlci ≥96, Cct 1800-10,000 K, 136,000 Lux @1 M With Br45 Reflector, Dmx512 And Rdm, Crmx, Ethernet Art-Net And Sacn, Bluetooth App, 100-240 V~ 50/60 Hz, 317×501×347 Mm, 10 Kg , Nanlite Rapid 60 Softbox With Grid (Bowens S) Or Godox Bowens Rapid Softbox With Grid: Sb-Fm-Rp60 Rapid Softbox, 60 Cm Class, Supplied With Grid | Quick-Erect Softbox With Fm-Mount Speed Ring For The Nanlite Forza Series Heads, So The Fitting Is Fm And Not Bowens S | Reflective Interior With Front Diffusion For Soft Even Output | Grid Controls Spill For Directional Key And Fill Work | Bowens S-Mount Equivalents Suit The Same Heads Where A Bowens Fit Is Required, E.G. The Godox M600r 720 W Cob (Bowens Mount, Ip54, Cri ≥96, Tlci ≥96, 136,000 Lux @1 M With Br45 Reflector, 100-240 V~ 50/60 Hz, 317×501×347 Mm, 10 Kg) Fm Ring + Included As-Sr Bm Bowens S Ring. , Nanlite Bowens Standard Barndoors (4-Leaf) Or Godox Bowens Barndoors (4-Leaf): Standard Four-Leaf Barndoors For Bowens S-Type Mount | Four Independently Adjustable Leaves Flag And Shape Beam Output, Cutting Spill And Flare | Fits Bowens-Compatible Heads Such As The Godox M600r 720 W Cob: Bowens Mount, Ip54 Body, Cri ≥96, Tlci ≥96, Cct 1800-10,000 K, G/M ±100 %, 0-100 % Dimming With Four Curves, Dmx512 And Rdm, Lumenradio Crmx, Ethernet Art-Net And Sacn, Bluetooth App And On-Board Control, 100-240 V~ 50/60 Hz, 317×501×347 Mm, 10 Kg , Nanlite Fl20g (Ln139222) Fresnel Lens With Barndoors (Bowens S) Or Godox Bowens Fresnel With Barndoors: Fresnel Lens With Barndoors, Adjustable Beam Angle 10-45°, Bowens S-Type Mount, Part Ln139222 | Focussing Lens Converts A Bowens-Mount Cob Head Into A Controllable Hard Spot For Key And Pattern Work | For Bowens S-Mount Heads Such As The Godox M600r 720 W Cob (Bowens Mount, Ip54, Cri ≥96, Tlci ≥96, Cct 1800-10,000 K, 136,000 Lux @1 M With Br45 Reflector, Dmx512/Rdm, Crmx, Art-Net And Sacn, Bluetooth App, 100-240 V~ 50/60 Hz, 317×501×347 Mm, 10 Kg) | Godox Alternative: Bf10 Bowens-Mount Fresnel For M Series And Pl Series Heads , Godox Mg Series - Power & Modifiers , Godox Pc01 Controller Mounting Device (Mg1200bi / Mg1200r / Mg2400bi / M600r / F800r): Pc01 Controller Mounting Device, The Clamp Supplied With The Separate Controller Of The Godox Mg And M Series Heads | Included In The Mg1200bi K1 And K2 Kit Listings Together With The Controller, Antenna, Steel Rope And Power Cable | Clamps The Controller To Stands So The Head Can Be Flown Separately | For The Mg1200bi 1200 W G-Mount Ip65 Head: Cct 2800-6500 K, Cqs ≥94, Cri ≥96, Tlci ≥96, Dmx And Rdm, Lumenradio Crmx, Ethernet Sacn And Art-Net, 86,100 Lux @3 M With Fresnel, 8 M Power And Connecting Cord | Also Used With Mg1200r, Mg2400bi, M600r And F800r Controllers , Godox Dc Extension Cable Coupler (Mg1200bi) Or Nanlux Equivalent: Dc Extension Cable Coupler For The Godox Mg1200bi, One Of Four Model-Specific Couplers Catalogued As Mg4k, Mg4kr/Mg6k, Mg1200bi And Mg1200r | Joins The Dc Connecting Cable Between The Light Head And Its Remote Controller To Extend Reach On Set | For The Mg1200bi 1200 W G-Mount Ip65 Head Supplied With An 8 M Power And Connecting Cord: Cct 2800-6500 K, Cqs ≥94, Cri ≥96, Tlci ≥96, Dmx And Rdm, Lumenradio Crmx, Ethernet Sacn And Art-Net, 86,100 Lux @3 M With Fresnel , Godox Dc Extension Cable Coupler (Mg4k) Or Nanlux Equivalent: Power Extension Coupler For The Controller-To-Fixture Run Of The Godox Knowled Mg4k | Lets The Power Controller Be Placed Off The Stand While The Head Stays Rigged | Mg4k Fixture Draw 2000 W | Proprietary Ac Power Input 100-240 Vac, 50/60 Hz | Keyed Proprietary Connector At Both Ends | Inline Single-Coupler Extension | Ip65-Rated Fixture Housing Class | Use With The Mg4k Power Controller And Mg-Series Controllers , Godox Mgr15 / Mgr20 / Mgr30 Reflectors (G-Mount) Or Nanlux Nl-Mount Reflectors: G-Mount Spot Reflectors For Knowled G-Mount Cob Heads | Beam Angles 15 Deg (Mgr15), 20 Deg (Mgr20), 30 Deg (Mgr30) | High-Reflectivity Silver-Coated Interior For Maximum Output And Contrast | Twist-Lock G-Mount Attachment, Tool-Free Changeover | Aluminium Body With Rolled Front Edge | Constrains Spill And Throws A Tighter, Harder Beam Than Bare Fixture | 1-Year Godox Warranty | Mg1200bi-Family 15/30/45/60 Deg Reflectors Also Catalogued , Godox Gs33 / Gs34 / Gs44 Rectangular Softbox (G-Mount) Or Nanlux Nl-Mount Rectangular Softbox: G-Mount Rectangular Softboxes For Knowled G-Mount Cob Heads | Sizes 90 X 90 Cm (Gs33) And 120 X 120 Cm / 4 X 4 Ft (Gs44) | Silver-Coated High-Reflectance Interior | Removable Inner Baffle Plus Front Diffuser For Even, Soft Directional Output | 4-Rod Collapsible Frame With Quick G-Mount Twist Lock | G-Mount Is A Larger, More Durable Interface Than Bowens S | Folds Flat, Carry Bag Included | 1-Year Godox Warranty , Godox Go4 / Go5 Octa Softbox (G-Mount) Or Nanlux Nl-Mount Octa Softbox: G-Mount Octagonal Softboxes For Knowled G-Mount Cob Heads | Go4 120 Cm (47 In) Octa, Go5 150 Cm (59 In, 5 Ft) Octa | Deep 8-Sided Profile Gives A Soft Wraparound Source With Controlled Spill | Highly Reflective Silver Interior For Even, Flattering Output | 4-Rod Collapsible Frame With Quick G-Mount Twist Lock | Removable Front Diffuser, Inner Baffle Supplied | Folds Flat Into The Supplied Carry Bag | 1-Year Godox Warranty , Godox Gl3 / Gl4 / Gl7 Lantern Softbox (G-Mount) Or Nanlux Nl-Mount Lantern Softbox: G-Mount Lantern (Balloon) Softboxes For Knowled G-Mount Cob Heads | Gl3 90 Cm, Gl4 120 Cm Oblate-Spheroid Lantern, Gl7 7 Ft (Approx 2.1 M) Diameter | Omnidirectional Approx 270 Deg Soft Output For Room Fill And Group Lighting | White Translucent Diffusion Body With Reflective Top Section | Collapses On A 4-Rod Frame With G-Mount Twist Lock | Hangs Or Stands On The Fixture Yoke | Carry Bag Supplied | 1-Year Godox Warranty , Nanlux Evoke 5000B Modifiers , Nanlux Fl-45E Motorized Fresnel (For Evoke 5000B) Or Godox G-Mount Motorized Fresnel: Motorized Fresnel Lens For The Nanlux Evoke 5000B, Nl Mount With Electronic Contacts | 45 Cm Lens With Motorized Zoom 16 Deg To 50 Deg, Drive Powered From The Fixture Through The Contacts | 79,500 Lux At 5 M At 5600 K In The 16 Deg Position | Ip66 Protection | 563 X 578 X 342 Mm, 13.75 Kg | Kit Includes Matching Barndoor (3.04 Kg) And Wheeled Trolley Case (16 Kg) Plus User Manual | Trolley Case 775 X 690 X 540 Mm , Nanlux Nl Mount Barndoor (For Evoke 5000B) Or Godox G-Mount Barndoor: Nanlux Nl-Mount Barndoor For Evoke-Series Fixtures Including Evoke 5000B | Eight Independently Adjustable Leaves On Moderate-Resistance Hinges For Precise Spill And Beam-Edge Control | Aluminium Construction, Matte Black | 453.4 X 351.8 X 50 Mm, 2 Kg | Nl Mount With Electronic Contacts, Recognised By The Fixture | Compatible With Evoke 900C / 1200 / 1200B / 2400B / 5000B | Four-Leaf Bd-Nlm Also Catalogued For Earlier Evoke Heads , Nanlux Nl Mount Reflector (For Evoke 5000B) Or Godox G-Mount Reflector: Nanlux Nl-Mount Reflector For The Evoke 5000B | 45 Deg Beam Angle Standard (Rf-Nl-L-45 Class); 30 Deg And 45+60 Deg Kit Also Catalogued | Nl Mount With Electronic Contacts For Fixture Recognition | Aluminium Body, Matte Finish | 375.4 X 359.9 X 173 Mm, 2 Kg | Does Not Accept A Grid | Raises Intensity And Constrains Spill Versus The Bare Fixture | Pairs With The Nl-Mount Barndoor For Edge Control , Tube Light Accessories , Nanlite Pavotube Ii 30Xr Clip-On Barndoors (4Ft T12): Clip-On Fabric Barndoors With Honeycomb Grid For Pavotube Ii 30Xr 4 Ft T12 Led Pixel Tubes | Ripstop Nylon Construction, Folds Flat And Travels Light | Continuously Adjusts Beam From 180 Deg Down To Under 5 Deg | Detachable 45 Deg Fabric Grid Included For Spill Control | Mounts Via T12-Diameter Clips; Also Fits Other Approx 4 Ft T12 Tubes | Passages Provided For Clamp Mounting Or Handheld Use | 1080 X 75 X 122 Mm, 0.154 Kg , Nanlite T12 Mounting Clip (Pavotube): Nanlite Transparent Polycarbonate T12 Mounting Clip For Pavotube Led Tubes | Grips 4 Ft T12-Diameter Tubes, Holding Them Vertically Or Horizontally | Two 1/4 In-20 Receivers For Mounting To A Light Stand, Tripod Or Accessory | Rubber-Lined Jaws Grip The Tube Without Marking It | Magnetic Variant Hd-T12-1-Mc And Double / Quad Clip Plates Hd-T12-4 Also Catalogued | Compact And Light, Leaves The Tubes Diffusion Face Unobstructed , Godox Tp-Fs60 Floor Stand (Extra Set) Or Nanlite Pavotube Floor Stand Equivalent: Floor Stand For Godox Knowled Tp-Series Led Pixel Tube Lights (Tp2r / Tp4r / Tp8r) | Lets The Tube Stand Free On Its End Without A Tripod Or Light Stand | Metal Floor Base With Collapsible Nested Legs That Fold For Storage And Transport | Quick Attachment To The Standing Tube | Compact Footprint For Tight Sets And Small Rooms | Supplied As One Floor Stand Per Set | Godox Knowled Accessory , Godox Liteflow Rigging , Godox Liteflow Multi-Reflector Array Grip Kit (Gk25 / Gk50): Multi-Reflector Array Grip Kit For The Knowled Liteflow Cine Reflector System | Rigs Multiple Liteflow Reflector Boards On One Stand With Independent Angle Adjustment | Gk50 Contents: 1 X 100 Cm (39.3 In) Rod, 2 X 75 Cm (29.5 In) Rods, 4 X 25 Cm (9.8 In) Rods, 4 X Ball-Joint Arms (Ab10rs), 4 X Single-Knob Gags, 2 X Dual-Knob Gags, 4 X Clamps | Maker Rates The Array For Up To 50 Liteflow Panels | 1-Year Godox Warranty , Godox Liteflow Rail Mounts (Wmr / Wms) - Soft Cases Supplied With The Reflector Kits: Rail Mounts For The Knowled Liteflow Reflector System | Slide Into The Guide-Slot Rail On The Back Of Any Liteflow Reflector Board | Wmr Rail-Mount Receiver: 5/8 In (16 Mm) Female Receiver To Accept A Light Stand Spigot | Wms Rail-Mount Stud: 5/8 In (16 Mm) Male Stud To Fit A Standard Grip Head Or Compatible Accessory | Supplied As A Rail-Mount Set | Speeds Rigging And Protects The Reflector Board | 1-Year Godox Warranty , Wireless Talkback / Intercom , Hollyland Solidcom Se-6S 6-Person Wireless Headset Intercom System: Six-Person Full-Duplex Single-Ear Wireless Headset Intercom | 1.9 Ghz (Dect) Version: 400 M Los; 2.4 Ghz Gfsk Global Version: 350 M Los | Dual-Mic Environmental Noise Cancellation Better Than 20 Db From All Directions | Detachable 770 Mah (2.926 Wh) Li-Ion, Under 3 H Charge, Master Headset 10 H And Remote Headset 12 H Runtime | 150 Hz To 7 Khz Plus/Minus 10 Db, Snr 71 Plus/Minus 2 Db | Approx 185.2 G Headset With Battery | Kit: 1 Master Plus 5 Remote Headsets, 6-Slot Charging Base, Usb-A To Usb-C Cable, Number Stickers , Photography Background , Digitek Dbsk-009Ft Studio Background Stand Kit (9X9ft): Studio Background Support Kit: Two Adjustable Support Stands Plus Crossbar For Fabric Or Paper Backdrops | Maximum Height 250 Cm | Folded Height 3.2 Ft (38.5 In) | Kit Weight 5.5 Kg | Spring-Loaded Sections Absorb Shock And Non-Slip Locks Hold The Risers | Lightweight And Sturdy, Folds Down And Packs Into The Supplied Carry Bag | Marketed For 9 Ft X 9 Ft Backdrop Support | Sku Dbsk-009 Ft , Hanumex 8X12ft Pro Muslin Backdrop Cloth (With Rod Pocket): 8 X 12 Ft Fabric Backdrop Cloth With Sewn Rod Pocket | 96 X 144 In (2.44 X 3.66 M) Single Panel, 96 Sq Ft Face | Wrinkle-Free, Ultra-Matte Fabric | Opaque Cloth With No See-Through And No Light Leak For Clean Keying And Background Work | Top Rod Pocket Slips Over The Background Stand Crossbar | Single Rectangular Panel, Hemmed Edges | Supplied In The 8 X 12 Ft Range As Green Screen, White And Black Variants , Heavy-Duty Stands For Godox Fleet , Avenger Combo Stand / Junior Spigot (Heavy-Duty): Heavy-Duty Combo (Junior) Light Stand In Chrome-Plated Steel | 3 Sections And 2 Risers With Built-In Levelling Leg For Uneven Ground | Combo/Universal Head: 28 Mm (1-1/8 In) Junior Receiver Plus Built-In Retractable 16 Mm (5/8 In) Non-Threaded Baby Pin | A1035cs: 168-350 Cm, Payload 40 Kg, 11.5 Kg, Leg Section 25 X 25 Mm | Captive Locking Handles, Fold-Flat Legs | Optional Wheel Set A9000n | A1020cs 200 Cm/35 Kg And A1045cs 450 Cm/40 Kg Complete The Range , Wind-Up Stand (Junior Spigot, Heavy-Duty): Heavy-Duty Wind-Up Stand, Chrome Steel Column, Legs And Geared Risers | 3 Sections, 2 Risers, Column Dia 55/45/38 Mm, Legs Dia 30 Mm | 181-370 Cm; Payload 30 Kg; 25 Kg | Built-In Fold-Away Crank Handle With Column Step For Raising And Lowering Under Load | 1 Levelling Leg And Braked Wheels | Combo Head With 28 Mm (1-1/8 In) Junior Receiver And 16 Mm (5/8 In) Retractable Baby Spigot | Designed And Made In Italy , Heavy Sandbag (30Kg) For Large Fixtures: Heavy-Duty Saddle Sandbag For Ballasting Large Fixtures, Stands And Booms | Fill Capacity 75 Lb (34 Kg) Of Sand Or Gravel - Empty Shell Shipped Unfilled | Black Nylon Saddle Construction With Twin Wings That Drape Over Stand Legs Or Booms | Hook-And-Loop (Touch Fastener) Closure At Both Ends Keeps The Fill Contained When Inverted | Empties Flat For Transport And Storage | Rugged Outer Fabric With Inner Liner , Junior Spigot Cheese Plate (Heavy-Duty Mounting): Heavy-Duty Cheese Plate With 28 Mm Junior Spigot | Cnc-Machined Aluminium Plate With 3/8 In Accessory Holes; Corner Holes Counter-Sunk 82 Deg | Kupo Kg024212: 6.0 X 11.5 In (293 X 153 X 10.5 Mm), 1.09 Kg; 12 X 12 In Square Variant Also Catalogued | 28 Mm Aluminium Receiver Spigot Fits A Junior Receiver Or Spans Two Combo Stands As A Goal Post | Mounts Heads, Arms, Clamps And Small Fixtures | Matte Finish , Lighting Control , Enttec Usb Pro Dmx Interface (Or Equivalent): Professional Usb-To-Dmx512 Interface With Onboard Processor And Rdm | 1 Universe, 512 Channels, Maximum Output Refresh Rate 40 Fps | Connectors: 1 X Female Xlr5 Dmx Output, 1 X Male Xlr5 Dmx Input, 1 X Usb 2.0 Type-B | Protocols Usitt Dmx512-A And Ansi E1.20 Rdm | 1500 V Full Isolation On Both Data And Power Lines | 5 V Dc Via Usb, 300 Ma, 1.5 W | Enttec Emu Configuration And Firmware Updates; Led Status Indicator | Abs Body, Ip20, 0-50 Deg C | 80 X 58 X 40 Mm, 80 G | 3-Year Return-To-Base Warranty , C-Stand Double Height With Turtle Base: Chrome-Plated Steel C-Stand (Century Stand) With Turtle Base, Double-Height 3.3 M Class | Avenger A2033f: 3 Sections, 2 Risers, Column Dia 35/30/25 Mm, Leg Dia 25 Mm | 134-328 Cm (10.8 Ft) | Payload 10 Kg | 5.5 Kg | Fixed 40 In Turtle Base With Individually Adjustable Legs That Fold Flat | 16 Mm (5/8 In) Baby Pin Top Attachment | Captive Locking Handles That Cannot Be Lost | For Flags, Cutters, Scrims And Heads Via Grip Head And Arm , Par Stand Double Height: Double-Height Heavy-Duty Par / Reflector Stand | Black Steel Column With Folding Braced Base | 1-1/8 In (28 Mm) Junior Receiver Top | Load Capacity 30 Kg | Height Range 5.6 Ft To 9.10 Ft (1.71-2.77 M) | Carries Par Cans, Reflectors, Skimmer/Butterfly Frames, Boom Rods And Heavy Fixtures | Junior Receiver Accepts 28 Mm Spigots And Combo Heads | Locking Collars On Each Riser , Par Stand Triple Height: Triple-Height Heavy-Duty Par / Reflector Stand | Steel Column With Folding Base And Locking Braces, Silver Finish | 1-1/8 In (28 Mm) Junior Receiver Top | Load Capacity 30 Kg | Height Range 5.9 Ft To 12.7 Ft (1.80-3.87 M) | Carries Par Cans, Reflector Frames, Skimmer/Butterfly Frames, Boom Rods And Heavy Lights | Junior Receiver Accepts 28 Mm Spigots And Combo Heads | Locking Collars On Each Riser , Low Base Stands: Low-Base Junior Roller Stand For Heavy Fixtures | Avenger A5036cs: Chrome Steel, 3 Sections, 2 Risers, 13.6 Kg | 156-300 Cm | Payload 40 Kg | 28 Mm (1-1/8 In) Female Attachment With 16 Mm (5/8 In) Retractable Baby Pin | Low-Profile Wide Base With Braked Wheels For Stability Under Heavy Heads | Built For Large Fixtures, Booms And Frame Support | Geared Risers With Locking Collars , Cutter Stands: Cutter Stand For Flags, Cutters And Light Modifiers | Removable Low Base Allows The Stand To Be Dropped To Floor Level For Low-Angle Cutting Of Light | Stainless Steel Column And Legs | Folding Base For Transport | Top Receiver Takes Grip Heads, Arms And Clamps Carrying 4 X 4 And 2 X 1 Flags | Heavy-Duty Build With Light Weight For Location Portability | Locking Collar On The Riser , Flags, Frames & Skimmers , 4X4 Black Flags: 4 X 4 Ft (122 X 122 Cm) Solid Black Flag For Cutting And Shaping Light | Matte Black Duvetyne / Commando Cloth On A Collapsible Two-Piece Frame | Black Fabric On Both Faces, Non-Reflective Nap Texture To Kill Bounce | Flame-Retardant Fabric Per The Duvetyne/Commando Cloth Standard | Lightweight Steel Or Aluminium Frame With Corner Ears And 5/8 In (16 Mm) Pin For A Grip Head | Folds For Transport | Used On C-Stands, Combo Stands And Grip Arms , 2X1 Black Flags: 2 X 1 Ft (24 X 12 In / 61 X 30 Cm) Solid Black Flag For Close Light Cutting | Matte Black Duvetyne / Commando Cloth, Non-Reflective Nap-Faced On Both Sides, Flame-Retardant | Collapsible Frame Folds For Transport | Corner Ear With 5/8 In (16 Mm) Pin For A Grip Head Or Clamp | Used For Finger Cutting, Edge Control And Camera-Side Spill Control | Matches The Finish And Frame System Of The 4 X 4 Flags , 4X4 Empty Frames: 4 X 4 Ft (122 X 122 Cm) Empty Flag / Butterfly Frame To Carry Light-Modification Material | 1 In (25.4 Mm) Square Aluminium Tubing With Welded Corner Ears | Mounts On 5/8 In (16 Mm) Pins Through Grip Heads, Or On Stands And Booms | Empty Frame Accepts Diffusion, Gel, Duvetyne, Nets, Scrims Or Silk | Knocks Down / Folds For Transport | 4 X 4 Ft Is The Smallest Size In The Square-Tube Frame Ladder That Continues At 6 X 6, 8 X 8 And 12 X 12 Ft | Silver Anodised Finish , 6X6 Skimmer/Butterfly Frames: 6 X 6 Ft (183 X 183 Cm) Skimmer / Butterfly Overhead Frame | 1 In (2.54 Cm) Square Aluminium Tubing, Welded Square Frame | Matthews 409106: 183 X 183 Cm, 6.4 Kg (14 Lb) | Accepts Diffusion, Silk, Scrim, Duvetyne, Net And Honeycomb Grid Fabrics | Mounts On Two Heavy Stands Or Booms Via Grip Heads And 5/8 In Pins | The 8 X 8 Ft And Larger Frames In The Same Family Add The Quick Reverse Ear For 180 Deg Re-Positioning , 10X10 Skimmer/Butterfly Frames: 10 X 10 Ft (305 X 305 Cm) Skimmer / Butterfly Overhead Frame | 1 In (2.54 Cm) Square Aluminium Tubing, Welded Square Frame | Carries Diffusion, Silk, Scrim, Duvetyne, Net And Honeycomb Grid Fabrics | Quick Reverse Ear On The Familys 8 X 8 Ft And Larger Square Frames For 180 Deg Re-Positioning | Mounts On Two Heavy Stands Or Booms Through Grip Heads And 5/8 In Pins | Flat, Rigid Frame For Overhead And Butterfly Rigs , 12X12 Skimmer/Butterfly Frames: 12 X 12 Ft (366 X 366 Cm) Skimmer / Butterfly Overhead Frame | 1 In (2.54 Cm) Square Aluminium Tubing | Matthews 409112: 366 X 366 Cm, 10.4 Kg (23 Lb) | Quick Reverse Ear Allows The Frame To Be Removed And Reversed For 180 Deg Re-Positioning | Carries Diffusion, Silk, Scrim, Duvetyne, Net And 40 Deg Honeycomb Grid Fabrics | Mounts On Two Heavy Stands Or Booms Via Grip Heads And 5/8 In Pins , Honeycomb Grids , Honeycomb Grid 6X6: 6 X 6 Ft Honeycomb (Grid) Cloth For Butterfly / Skimmer Frames | Fabric Fold-Up Grid At The Standard 40 Deg Cell Angle; 20, 30 And 50 Deg Also Available In The Family | Black Fabric Cells With Bungee-Cable Fastening That Grips 30 Mm Square Or 42 / 48 Mm Round Frame Tubing Without Sagging | Includes Carry Bag | Directly Controls Light Spread And Spill In Front Of A Frame Or Softbox | Folds Flat And Travels Light , Honeycomb Grid 10X10: 10 X 10 Ft Honeycomb (Grid) Cloth For Butterfly / Skimmer Frames | Fabric Fold-Up Grid At The Standard 40 Deg Cell Angle; 20, 30 And 50 Deg Also Available In The Family | Black Fabric Cells With Bungee-Cable Fastening That Grips 30 Mm Square Or 42 / 48 Mm Round Frame Tubing Without Sagging | Includes Carry Bag | Directly Controls Light Spread And Spill In Front Of A Frame Or Softbox | Folds Flat And Travels Light , Honeycomb Grid 12X12: 12 X 12 Ft Honeycomb (Grid) Cloth For Butterfly / Skimmer Frames | 40 Deg Cell Angle; 20, 30 And 50 Deg Also Available In The Same Family | Installed Size 354 X 354 X 12 Cm, Grid Face 366 X 366 Cm, Installed Weight 10 Kg | Packed 50 X 50 X 14 Cm, 10.5 Kg | Bungee-Cable Fastening Grips 30 Mm Square Or 42 / 48 Mm Round Frame Tubing Without Sagging | Carry Bag Included | Fts Every 12 X 12 Ft Butterfly Frame , Cloths - Diffusion, Negative Fill, Chroma Key , 6X6 Skimmer Cloth (Diffusion): Diffusion Skimmer Cloth For A 6 X 6 Ft Butterfly Frame | Full Or Half Grid Diffusion Fabric, Approximately 1/4 Or 1/2 Stop Density, 6 X 6 Ft (1.83 X 1.83 M) Cut | Double-Stitched Reinforced Perimeter With Tie Cords At Every Corner And Colour-Coded Binding To Identify Density At A Glance | Flame-Retardant Treated To A Recognised Film And Theatre Standard | Folds Into A Labelled Storage Bag That Also Carries The Density Marking , 6X6 Black Cloth: 6 X 6 Ft Black Cloth For Butterfly Frames | Opaque Matte Black Cotton Or Polyester Duck Fabric, Minimum 10 Oz Per Square Yard (Approximately 340 Gsm) | 6 X 6 Ft (1.83 X 1.83 M) Cut With Double-Stitched Hems, Corner Ties And Colour-Coded Binding | Deep Matte Finish With No Sheen Or Reflectivity, Flame-Retardant Treated | Blocks All Light For Full Blackout And Negative Fill When Tensioned On A 6 X 6 Frame , 6X6 Green Cloth: 6 X 6 Ft Green Cloth For Butterfly Frames | Chroma-Key Green Fabric, 6 X 6 Ft (1.83 X 1.83 M), Double-Stitched With Corner Ties And Colour-Coded Binding | Colour Matched For Consistent Keying In Post Production With A Matte Surface That Suppresses Specular Spill | Medium Weight Cotton Or Polyester Weave That Resists Sagging Under Tension And Is Washable | Flame-Retardant Treated; Portable Green Screen Coverage On A Butterfly Or Overhead Frame , 10X10 Skimmer Cloth (Diffusion): Diffusion Skimmer Cloth For A 10 X 10 Ft Butterfly Frame | Full Or Half Grid Diffusion Fabric Of Approximately 1/4 Or 1/2 Stop Density, 10 X 10 Ft (3.05 X 3.05 M) Cut | Reinforced Double-Stitched Perimeter With Corner Ties And Colour-Coded Binding Showing The Density | Flame-Retardant Treated To A Recognised Film And Theatre Standard | Softens Daylight And Large Sources Across A Wide Area; Folds Into A Labelled Storage Bag , 12X12 Skimmer Cloth (Diffusion): Diffusion Skimmer Cloth For A 12 X 12 Ft Butterfly Frame | Full Or Half Grid Diffusion Of Approximately 1/4 Or 1/2 Stop Density, 12 X 12 Ft (3.66 X 3.66 M) Cut | Double-Stitched Reinforced Perimeter With Corner Ties And Colour-Coded Density Binding | Flame-Retardant Treated To A Recognised Film And Theatre Standard | Covers A Full 12 X 12 Frame For Broad Softening Of Daylight Or Large Artificial Sources; Supplied Folded In A Labelled Bag , 10X10 Black Cloth: 10 X 10 Ft Black Cloth | Opaque Matte Black Cotton Or Polyester Duck, Minimum 10 Oz Per Square Yard (Approximately 340 Gsm) | 10 X 10 Ft (3.05 X 3.05 M) With Double-Stitched Hems, Corner Ties And Colour-Coded Binding | Light Absorbing With No Sheen, Flame-Retardant Treated, Tear Resistant | Used For Negative Fill, Blackout And Set Masking On Standard 10 X 10 Grip Frames , 12X12 Black Cloth: 12 X 12 Ft Black Cloth | Opaque Matte Black Duck Fabric, Minimum 10 Oz Per Square Yard (Approximately 340 Gsm) | 12 X 12 Ft (3.66 X 3.66 M) With Reinforced Double-Stitched Hems, Corner Ties And Colour-Coded Binding | Non-Reflective Matte Surface, Flame-Retardant Treated To Film And Theatre Standards | Full Blackout And Negative Fill On A 12 X 12 Butterfly Frame; Supplied Folded And Bagged With A Size Label , 10X10 Green Cloth: 10 X 10 Ft Green Cloth | Chroma-Key Green Fabric, 10 X 10 Ft (3.05 X 3.05 M), Double-Stitched Hems With Corner Ties And Colour-Coded Binding | Matte, Colour Neutral Surface For Consistent Chroma Keying With Reduced Spill | Washable Medium Weight Weave That Holds Flat Under Tension, Flame-Retardant Treated | Portable Green Screen Coverage On A 10 X 10 Frame For Studio And Location Work , 12X12 Green Cloth: 12 X 12 Ft Green Cloth | Chroma-Key Green Fabric, 12 X 12 Ft (3.66 X 3.66 M), Reinforced Hems With Corner Ties And Colour-Coded Binding | Matte Surface Engineered For Keying, Colour Stable Under Studio Lighting, Flame-Retardant Treated | Washable, Tear Resistant Weave That Resists Sagging | Large Format Green Screen Coverage For Full Body, Group And Vehicle Keys On Location Or In Studio , Rods, Arms & Grip Hardware , Boom Rods (6Ft-12Ft): Boom Rods, 6 Ft To 12 Ft Extendable | Telescopic Aluminium Tube Set With A 5/8 In Baby Pin And A Junior Receiver End, Positive Locking Collar At Every Section | Rated Working Load 5 Kg Or More When Fully Extended, Unit Weight 2 Kg Or Less | Black Anodised Or Matte Black Finish To Prevent Reflections Reaching The Lens | Used For Booms, Overheads And Extension Arms On Grip Stands; Supplied With A Storage Sleeve , Arm Rods (Various Sizes): Arm Rods, Assorted Sizes | Steel Or Aluminium Rods In Lengths From 20 In To 48 In, Terminating In 5/8 In Baby Pins Or Junior Receivers At Each End | Rated Load 10 Kg Or More Per Rod With Chamfered, Deburred Ends | Matte Black Finish, Corrosion Resistant Plating On Steel Variants | Assorted Set Supplied In A Canvas Roll Sized For A Grip Cart , L-Rods (Various Sizes): L Rods, Assorted Sizes | 90 Degree Aluminium L Section Rods In Assorted Lengths For Offsetting Fixtures Sideways Off Stands And Walls | Terminating 5/8 In Baby Pin Or Junior Receiver, Rated Load 10 Kg Or More Per Rod | Deburred Edges, Matte Black Finish, 25 Mm Or Heavier Section | Supplied As An Assorted Set In A Canvas Roll Or Cart Pouch , Grip Heads (Professional Grade): Professional Grip Heads | Four-Hole Aluminium Grip Head, 2.5 In Or 4.5 In Disc Diameter As Ordered, With A Spring-Loaded Lock-Off Knob On A 5/8 In Baby Pin Shaft | Accepts 5/8 In Baby Pin, 3/8 In And 1/4 In Studs; Rated Load 15 Kg Or More | Knurled Aluminium Discs With Replaceable Locking Washers To Prevent Slip Under Load | Matte Black Finish; Standard Fitting For C-Stands, Boom Arms, Flags And Frames , Clamps & Adapters , Light Clamps (Mafer/Super Type): Mafer And Super Clamps | Aluminium Clamp Body With A 5/8 In Baby Receiver, Jaw Opening Up To 50 Mm | Spring-Loaded Or Screw-Actuated Jaws With Protective Rubber Pads, Rated Load 15 Kg Or More | Accepts Baby Pins, Magic Arms And Small Fixtures; Matte Black Or Bright Anodised Finish | Used For Clamping Lights, Small Frames And Accessories To Stands, Pipes And Truss , Cardellini Clamps (Jaw Clamp): Cardellini Clamps (Jaw Clamp) | Aluminium Jaw Clamp With A 50 Mm Or 75 Mm Jaw Opening As Ordered | Supplied With 1/4 In-20 And 3/8 In Threaded Holes Plus A Baby Pin Adapter, Rated Load 11 Kg Or More | Protective Jaw Pads To Avoid Marking Tubes And Truss, Matte Black Finish | Used To Mount Lights, Monitors And Small Accessories Directly Onto Tubes And Pipe , Scissor Clamps (5/8 Baby Pin): Scissor Clamps, 5/8 In Baby Pin | Spring-Loaded Scissor Clamp For Tube And Pipe Mounting With A Jaw Opening Of 25 To 50 Mm | Integral 5/8 In Baby Pin, Rated Load 10 Kg Or More | Rubber-Padded Jaws That Grip Without Marking, Matte Black Finish | Used For Small Fixtures In Studios And On Location , Baby Pin / Junior Pin Adapters: Baby Pin And Junior Pin Adapters | Set Of Adapters Converting Between The 5/8 In Baby Pin And The 1.125 In Junior Receiver In Both Directions | Machined Aluminium Or Steel Construction, Rated Load 15 Kg Or More | Includes 3/8 In And 1/4 In Threaded Stud Variants And Knurled Lock Rings | Matte Or Anodised Finish, Supplied As A Set In A Labelled Pouch , Safety & Stability , Sandbags (Professional Grade, 15Kg): Professional Sandbags, 15 Kg Capacity | Heavy Duty Woven Polypropylene Or Cordura Bag With A 15 Kg Fill Capacity | Double-Stitched Seams With Hook-And-Loop Or Zip Closure, Empty Weight Under 400 G | Reinforced Carry Handle Plus A Hanging Loop That Drapes Over Stand Legs And Spreaders | Colour: Black; Supplied Empty Or Pre-Filled As Specified , Shot Bags (7Kg): Shot Bags, 7 Kg Capacity | Woven Bag With 7 Kg Fill Capacity, Double-Stitched Seams And A Zip Or Hook-And-Loop Closure | Empty Weight Under 250 G With An Integral Carry Handle | Used To Counterweight Boom Arms, Small Stands And Camera Carts | Colour: Black; Supplied Empty Or Pre-Filled As Specified , Bounce, Reflectors & Support , Loop Boards (Various Sizes): Loop Boards, Assorted Sizes | Rigid Plywood Board With A Routed Hand Loop, Assorted Sizes From 12 X 12 In To 24 X 24 In | 18 Mm Plywood Construction, Rated Load 100 Kg Or More When Laid Flat | Used As Levelling Boards, Small Platforms And Weight Distribution Pads | Edges Sanded And Sealed, Matte Black Paint Finish , Reflector Board 4X4: Reflector Board, 4 X 4 Ft | 4 X 4 Ft (1.22 X 1.22 M) Plywood Board With Hand Loops And A Hardboard Facing | 18 Mm Thickness, Weight Under 12 Kg, Rated Load 100 Kg Or More | White Or Silver Reflective Facing On One Side For Bounce Work | Edges Sealed, Matte Black Backing Finish , Low Board: Low Board | Plywood Low Board With Hand Loops, Approximately 8 In (200 Mm) High | 18 Mm Plywood Construction, Rated Load 150 Kg Or More When Laid Flat | Suitable For Standing A Camera, Operator Or Small Fixture On | Matte Black Paint Finish With Sanded, Sealed Edges , Apple Box Setup (Full, Half, Quarter, Pancake): Apple Box Set, Full, Half, Quarter And Pancake | Standard Wooden Apple Boxes: Full 20 X 12 X 8 In, Half 20 X 12 X 4 In, Quarter 20 X 12 X 2 In, Pancake 20 X 12 X 1 In | Solid Hardwood Or 18 Mm Plywood With Routed Hand Grips And A Full Length Centre Support In Each Box | Rated Load 160 Kg Or More Per Box | Supplied As A Set Of Four Gauges, Matte Black Or Natural Finish , Stool Setup (1/2Ft, 1Ft, 1.5Ft, 2Ft):Stool Set, 1/2 Ft, 1 Ft, 1.5 Ft And 2 Ft | Four Piece Stool Set At 152 Mm, 305 Mm, 457 Mm And 610 Mm Heights | Wooden Or Steel Construction With A Hand Grip Cut Into The Top And An Anti-Slip Surface | Rated Load 150 Kg Or More Per Stool | Used For Seating Operators And Holding Small Fixtures , Overhead & Specialty Rigging , King Pole (6Ft To 12Ft Extendable): King Pole, 6 Ft To 12 Ft Extendable | Aluminium Extension Pole Extending From 6 Ft To 12 Ft With A Spring Or Ratchet Locking Mechanism | Non-Marking Rubber Pads At Both Ends, Rated Vertical Load 30 Kg Or More When Compressed Between Floor And Ceiling | Matte Black Finish, Positive Lock At Each Section, No Slippage Under Load | Used With Butterfly Frames And Overheads , Nets & Scrims , Nets/Scrims Set - 18X24 (Single, Double, Triple): Net And Scrim Set, 18 X 24 In | Three Piece Set At Single (Approximately 0.3 Stop), Double (Approximately 0.6 Stop) And Triple (Approximately 0.9 Stop) Densities | Aluminium Or Wire Frame With Mesh Held Taut, 3/8 In Pin Or Clamp Fitting To The Stand | Colour Neutral Mesh That Reduces Light Output Without Shifting Colour Temperature | Supplied As A Set Of Three In A Labelled Bag , Nets/Scrims Set - 24X36 (Single, Double, Triple): Net And Scrim Set, 24 X 36 In | Three Piece Set At Single, Double And Triple Densities In 24 X 36 In Frames | Rigid Aluminium Or Wire Frame With Taut Mesh, 3/8 In Pin Or Clamp Fitting | Used To Grade Light Output In Stops With No Colour Shift | Supplied As A Set Of Three In A Labelled Bag , Fabrics & Special Materials , Duvetyne / Commando Cloth (Roll, 60X50yds): Duvetyne And Commando Cloth Roll, 60 In X 50 Yd | Matte Black Cotton Duvetyne At Minimum 16 Oz Per Square Yard (Approximately 540 Gsm) | 60 In (1.52 M) Wide By 50 Yd (45.7 M) Long Roll | Flame-Retardant Treated, Light Absorbing With No Sheen, Tear Resistant | Used For Blackout, Light Control And Set Masking; Supplied On A Core Wound Roll , Cucoloris (Wooden Cookies) - Set Of 4: Cucoloris Wooden Cookies, Set Of Four | Four 24 X 36 In (610 X 914 Mm) Plywood Cookies, Each With A Different Randomly Cut Hole Pattern | 12 To 18 Mm Thickness With Hand Hold Cut-Outs | Matte Black Painted Both Faces, No Light Leak Through The Edges | Placed In Front Of A Light Source To Break It Into Shadow Patterns Such As Foliage And Window Blinds , Beadboard/Foamcore Bounce (4X8ft Sheets): Beadboard And Foamcore Bounce Sheets, 4 X 8 Ft | Expanded Polystyrene Foam Board, 4 X 8 Ft (1.22 X 2.44 M) Sheets | 12 To 25 Mm Thickness With Smooth, Non-Reflective White Faces On Both Sides | Lightweight And Warp Resistant Horizontal And Vertical | Used As Large Bounce Reflectors And As Light Set Walls; Supplied Flat In Quantities To Cover A 4 X 8 Ft Run Each , Power Distribution , Stingers (25Ft/7.5M Heavy-Duty): Heavy Duty Stingers, 25 Ft (7.5 M) | Three Core 12 Awg Extension Cable, 25 Ft (7.5 M) Long | Rated 15 A At 250 V Ac With Earth Continuity Throughout | Heavy Duty Moulded 3-Pin Plug And Socket, Oil And Abrasion Resistant Outer Sheath | Colour Coded For Studio Identification, Supplied Coiled And Tied , Cube Taps / 3-Way Splitters (Edison): Cube Taps And 3-Way Splitters, Edison | 3-Way Outlet Splitter Accepting Standard 3-Pin Plugs | Rated 15 A At 250 V Ac With Earth Continuity And Insulated Pins | Robust Moulded Body Resistant To Impact And Heat | Used To Distribute Mains Power On Set And On The Studio Floor; Supplied As A Set , Bates / Power Distribution Boxes (60A-100A): Bates And Power Distribution Boxes, 60 A To 100 A | Portable Power Distribution Box Rated 60 A To 100 A With Multiple 15 A Or 16 A Outlets | Individual Circuit Breakers Per Outlet Plus A Main Isolator And Earth Leakage Protection | Metal Enclosure With Insulated Carry Handles, Phase And Circuit Status Indicators | Input Via Camlock Or Heavy Duty Socket, Weather Resistant Finish; Socket Configuration And Protection Rating To Be Confirmed Against The Studio Supply , Aerial Work Platform , Jlg Electric Scissor Lift (Studio Use): Jlg Electric Scissor Lift For Studio Use | All-Electric Scissor Lift At A 19 Ft (5.8 M) Class Working Platform Height With A Rated Platform Capacity Of 227 Kg Or More | Battery Powered Electric Drive With Non-Marking Tyres Suitable For Studio Floors And Onboard Charger | Platform Extension Deck, Guard Rails And Fall Protection Gate | Compact Stowed Dimensions To Pass Studio Doorways; Class Specification To Be Met With Current Jlg, Genie Or Equivalent Documentation , Sub Total , Gst 18%