Tender For Repair /Maint To All Type Of Hosp Furniture Under Ge (West) Lucknow
Tender Value
49 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
15 days left
EMD
98000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair /Maint To All Type Of Hosp Furniture Under Ge (West) Lucknow
BOQ
| Sl. No. | Item Description |
| 1 | TABLE DINING OR'S : DRG NO FD- 165 M (ITEM NO 1 to 6) : S&F in replacement of old u/s new top made of 18/19mm thick EDHMR board with 22 gauge aluminium sheet all around the top shall be provided complete all as specified on drg and dircted. |
| 2 | S&F in replacement of old u/s new legs of size 720mm, 25mm bore made of 16 gauge MS conduit pipe throughout with shape and size as per existing complete all as specified and as shown on drg. |
| 3 | All as per item No 1 above but centre stiffner of size 1600x25x25mm complete all as specified and dircted. |
| 4 | All as per item No 1 above but side stiffener of size 480x25x1.6mm complete all as specified and dircted. |
| 5 | S&F in replacement of old u/s new shoe PVC to legs as per existing complete all as specified and directed as shown on drg . |
| 6 | M&L of welding of cracked joints at steel frame, derusting, cleaning of old surface of frame with & including parts/ item repaired under item No 1 to 5 above and applying two coats of white systhetic enamel paint over a coat red oxide primer complete all as specified and as shown on drg . |
| 7 | ALMIRAH MED STEEL WITH SHELVES : DRG NO FD-1032 (Item No 7 to 16) : S&F in replacement of old u/s new chromium plate handle 100 mm long complete all as specified and directed as shown on drg . |
| 8 | S&F in replacement of old u/s new 6 lever of brass lock complete all as specified and as shown on drg. |
| 9 | S&F in replacement of old u/s new lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg . |
| 10 | S&F in replacement of old u/s new MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg . |
| 11 | S&F in replacement of old u/s new cleats complete all as specified and as shown on drg . |
| 12 | S&F in replacement of old u/s new hinges of size 75mm (ISI Marked) for the shutters of almirah large steel complete all as specified and directed. |
| 13 | S&F in replacement of old u/s new legs made of 18 gauge of MS sheet complete all as specified and as shown on drg . |
| 14 | S&F in replacement of old u/s new shelves made of MS plain sheet 1mm thick complete all as specified and as shown on drg . |
| 15 | S&F in replacement of old u/s new door shutter made of MS plain sheet 1mm thick shape and size complete all as specified and as shown on drg . |
| 16 | M&L for removal of denting of deshaped portion and scraping of complete removal of old paint by paint remover and sand paper of Almirah Med with Steel shelf, cleaning of rusted surface with including parts/item repaired under items No 7 to 15 above including preparation of surface by applying two coats of paint AD Gray /olive green synthetic enamel on internal surfaces over a coat of putty and hammer tex/olive green synthetic enamel on external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 17 | RACK STEEL 3/4/6 TIER : DRG NO FD- 106M & 1038 (a) (Item No 17 to 19) : S&F in replacement of old u/s new shelves made of 20 gauge MS sheet and applying two coats of syntetic enamel paint white over a coat of red oxide primer with size and shape as per existing complete all as specified and as shown on drgs. |
| 18 | S&F in replacement of old u/s new leg made of angle iron with size and shape as per existing complete all as specified and as shown on drgs. |
| 19 | M&L for removal of denting at the deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Steel, cleaning of rusted surface with including parts/item repaired under items No 17 to 18 as above including preparation of surface by applying two coats of paint AD Gray /olive green synthetic enamel on internal surfaces over a coat of putty and hammer tex/olive green synthetic enamel on external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 20 | TABLE OFFICE OFFR'S STEEL/TABLE OFFICE CLK STEEL : DRG NO FD- 1003 & FD-1004 (Item No 20 to 27) : S&F in replacement of old u/s new top of size 1680mm (L)x870mm (W) made of 18/19 thick pre laminated EDHMR board with 2mm plastic beading all round covered with the reqd gloss steel screw to frame complete all as specified and as shown on drgs. |
| 21 | All as per item No 20 above but size 1220 (L) x610mm (W) complete all as specified and directed. |
| 22 | S&F in replacement of old u/s new brass lock 6 lever, after removing the dents of drawers and cup board to make it functional complete all as specified and directed and as shown on drgs. |
| 23 | S&F in replacement of old u/s new leg made of 1.5mm thick MS square pipe with size & shape as exists complete all as specified and directed as shown on drgs. |
| 24 | S&F in replacement of old u/s new centre stiffner made of 1.5mm thick MS square tube with size & shape as exists complete all as specified and directed as shown on drgs. |
| 25 | All as per item No 24 above but side stiffner complete all as specified and directed shown on drg. |
| 26 | S&F in replacement of old u/s new hard rubber shoe with size & shape as exists complete all as specified and as shown on drgs. |
| 27 | M&L for removal at denting at the deshaped portion and scraping of complete old paint by paint remover and sand paper of Table office offrs/clk steel . Table, cleaning of rusted surface with repaired items No 20 to 26 above including preparation of surface by applying two coats of AD Gray /olive green synthetic enamel paint on internal surfaces over a coat of putty and hammer tex/olive green synthetic enamel on external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 28 | ALMIRAH STEEL LARGE , 1/2 HANGING 1/2 SHELVES/ALMIRAH GLAZED STEEL AND ALMIRAH FOR MAP STEEL: DRG NO FD-1031, 1033, 1034, FD-104(M) & FD-106M (Item No 28 to 37) : S&F in replacement of old u/s new chromium plated handle 100mm long complete all as specified and as shown on drg . |
| 29 | S&F in replacement of old u/s new lock of 6 lever of maruti brass lock complete all as specified and as shown on drg. |
| 30 | S&F in replacement of old u/s new lock cover made of 16 gauge MS sheet complete all as specified and as shown on drg . |
| 31 | S&F in replacement of old u/s new MS Round bar 8mm fixing with lock cover upper and lower complete all as specified and as shown on drg . |
| 32 | S&F in replacement of old u/s new legs made of 18 gauge of MS sheet complete all as specified and as shown on drg . |
| 33 | S&F in replacement of old u/s new hanging rod of 20 mm bore mild steel chromium plated made of 1 mm thick conduit pipe , 915 mm long with both side steel socket complete all as specified and as shown on drg . |
| 34 | S&F in replacement of old u/s new shelves with cleat made of MS plain sheet 1mm thick complete all as specified and as shown on drg. . |
| 35 | S&F in replacement of old u/s new door shutter made of MS plain sheet 1mm thick shape and size as per existing complete all as specified and as shown on drg. |
| 36 | S&F in replacement of old u/s new hinges of size 75mm (ISI Marked) for shutters of almirah large steel with shelves/ Glazed Almirah double shutter complete all as specified and as shown on drg. |
| 37 | M&L for removal of denting at deshaped portion and scraping of complete removal of old paint by paint remover and sand paper of Almirah, cleaning of rusted surface with including parts/item repaired under items No 28 to 36 above including preparation of surface by applying two coats of paint AD Gray /olive green synthetic enamel on internal surfaces over a coat of putty and hammer tex/olive green synthetic enamel on external surface by spray gun machine over a coat of red oxide primer complete all as specified and shown on drg. |
| 38 | LOCKER BED SIDE STEEL : DRG NO FD-257 & FD-1029 (Item No 38 to 44) : S&F in replacement of old u/s new chromium plated handle 100mm long complete all as specified and as shown on drg . |
| 39 | S&F in replacement of old u/s new lock of 6 lever of maruti brass lock complete all as specified and as shown on drg. |
| 40 | S&F in replacement of old u/s new MS hasp and staple of100mm size complete all as specified and as shown on drg . |
| 41 | S&F in replacement of old u/s new legs of 16 gauge MS sheet with size & shape as per existing complete all as specified and as shown on drg . |
| 42 | S&F in replacement of old u/s new shelves made of MS plain sheet 1mm thick as per existing shape and size complete all as specified and as shown on drg . |
| 43 | S&F in replacement of old u/s new door shutter made of MS plain sheet 1mm thick as per existing shape and size complete all as specified and as shown on drg. |
| 44 | M&L for removal of denting at deshaped portion and scraping of complete old paint by paint remover and sand paper of Locker bed side steel, cleaning of rusted surface repaired under items No 38 to 43 above including preparation of surface by applying two coats of AD Gray /olive green synthetic enamel paint on internal surfaces over a coat of putty and hammer tex/olive green synthetic enamel on external surface by spray gun machine over a coat of red oxide primer complete all as specified and directed as shown on drg. |
| 45 | RACK TOWEL STEEL : DRG NO FD-106M & 1038 (For Item No 45 to 47) : S&F in replacement of old u/s new leg made out of 25mm bore MS tube having 1.5mm wall thickness, 2.08 Mtr long complete as specified and as shown on drg. |
| 46 | S&F in replacement of old u/s new hard rubber shoe with size & shape as per existing complete all as specified and as shown on drg. |
| 47 | M&L for removal of denting at deshaped portion and scraping of complete old paint by paint remover and sand paper of Rack Towel Steel, cleaning of rusted surface repaired under items No 45 to 46 above including preparation of surface by applying two coats of AD Gray /olive green synthetic enamel paint on internal surfaces over a coat of putty and hammer tex/olive green synthetic enamel on external surface by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drg. |
| 48 | TEAPOY VARANDAH : Drg No FD-288, 383 (For Item No 48-52) : S&F in replacement of old u/s new top of table made of18/19mm thick pre-laminated EDHMR board exterior grade of size 900x450mm, one side teak colour and another side white with 2mm plastic beading fancy type edging all around the table complete all as specified and as shown on drgs |
| 49 | S&F in replacement of old u/s new leg made out of 20mm dia MS conduit pipe having 1.5mm wall thickness with shape and size as per existing and welded with frame complete all as specified and as shown on drgs. |
| 50 | S&F in replacement of old u/s new stiffner made out of 10mm MS round bar bent to shape and size welded with frame complete all as specified and as shown on drgs. |
| 51 | S&F in replacement of old u/s new hard rubber shoe shape and size welded with frame all as shown on drg complete all as specified and as shown on drgs. |
| 52 | M& L for preparation of old/new steel surface and applying two coats of synthetic enamel (white) paint on all internal and external surface of steel over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 53 | Tubular steel chair with arms and without arms : Drg No FD-75M (Item No 53 to 57) : S&F in replacement of old u/s new seat made out of 1st class teak wood duly canned complete all as specified and as shown on drgs. |
| 54 | S&F in replacement of old u/s new back seat made out of seasoned shesham wood duly canned complete all as specified and as shown on drgs. |
| 55 | S&F in replacement of old u/s new arms made out of seasoned shesham wood complete all as specified and as shown on drgs. |
| 56 | S&F in replacement of old u/s new flat iron of size 475mm x25mm x 3mm thick welded for support to seat of Chair CB Steel complete all as specified and as shown on drgs. |
| 57 | M&L for painting to steel surfaces of chair steel tubular with OG Paint by applying two coats of synthetic enamel paint over a coat of red oxide primer after preparing of surface complete all as specified and as shown on drgs. |
| 58 | Chair Verandah : Drg No FD/MAP/12 & FD-256 (Item No 58 to 62) : Welding (Gas /Elect) of broken frame with 10 mm round bar, legs where as required to make its actual shape and size complete all as specified and as shown on drgs. |
| 59 | M&L for preparation of old steel surfaces with sand paper and painting with one coat of synthetic enamel paint by spary gun machine complete all as specified and as shown on drgs. |
| 60 | S&F in replacement of old u/s newhard rubber shoe size of 20 mm dia complete all as specified and as shown on drgs. |
| 61 | Taking/cutting out old unserviceable cane from chair Verandah and supplying & recanning of chair with white plastic cane (Oval shape) 4 mm wide and canning seat and back with 4mm wide cane as per the Matt pattern complete all as specified and as shown on drg. |
| 62 | Taking out old unserviceable PVC Seat with stiffner provided in centre and back & S&F new PVC Seat & back 4mm thick with weight not less than 1.85 kg and grooves 90x10 Nos on seat & back complete all as specified and as shown on drgs. |
| 63 | Rack Shoe Steel : DRG NO FD/E6/MAP/02(R) (Item No 63 to 67) : Replacement of old u/s new main frame (legs) of Rack shoe steel made of 25mm dia MS pipe (18 gauge) old u/s Top and bottom outer frame work as per existing complete all as specified and as shown on drgs. |
| 64 | S&F in replacement of old u/s new jali shelves (05 Nos) made with 3mm dia MS rods as per existing complete all as specified and as shown on drgs. |
| 65 | M&L of welding of joints/fixing shall be done in accordance with standard workmanship complete all as specified and as shown on drgs. |
| 66 | S&F in replacement of old u/s new hard rubber/PVC shoe shall be provided to the bottom of each leg complete all as specified and as shown on drgs. |
| 67 | M&L for preparation of old steel surfaces with sand paper and applying one coat of synthetic enamel paint with spray gun machine (White) complete all as specified and as shown on drgs. |
| 68 | COUCH EXAMINATION ALL TYPE : DRG NO FD-122 (Item No 68 to 76 ) : Taking out old unserviceable Rexene cloth, Hessian cloth, Dunlop foam, coir fibre/cotton layers of side and lower planks and Supply and fixing new Rexene cloth, Hessian cloth, coir fibre, 12 mm thick cotton layer, 25 mm thick cushion of 32 density and covered with UPHOLSTRY (Leatherite) cloth complete. and replacement of damaged spring and damaged planks of 1st class teak wood where ever required complete all as specified and as shown on drgs.Note : Wooden plank and spring shall be measured and paid separetely. |
| 69 | Supply only new planks of 1st class teak wood 12 mm thick as per existing complete all as specified and as shown on drgs. |
| 70 | Supply only new spring required for Couch Examination as per existing complete all as specified and as shown on drgs. |
| 71 | S&F in replacement of old u/s new leg of MS Square pipe 25 mm having 1.6mm wall thick including necessary welding to stiffners complete all as specified and as shown on drgs. |
| 72 | Ditto all as per item No 68 but centre stiffner, size-25mm square tube steel including welding to leg complete all as specified and as per drg. |
| 73 | Ditto all as per item No 68 but side stiffner, size-25mm square tube steel including welding to leg complete all as specified and as shown on drgs. |
| 74 | S&F in replacement of old u/s new hard rubber shoe of approved quality as per existing complete all as specified and as shown on drgs. |
| 75 | S&F in replacement of old u/s new drawers complete with knob as per existing size and shape as shown on drg. |
| 76 | M&L for removal of denting at deshaped portion couch examination and applying one coat of synthetic enamel OG paint on steel surface and one coat of polishing on wooden surfaces complete all as specified and as shown drg. |
| 77 | DESK SCHOOL TYPE 'A' DESK ADULT & DESK 4X6 : DRG NO FD-107& 124: (Item No 77 to 86) : S&F in replacement of old u/s new 19mm Plank made of 1st class hard wood teak (MP teak) free from cracks etc. with permissible moisture contents as per existing shape and size complete all as specified and as shown drg. |
| 78 | Ditto all as per items No 77 but side plank, size-19mm thick 370 x 140mm complete all as specified and as shown on drg . |
| 79 | Ditto all as per items No 77 but Top/Bottom plank. 19mm thick 365 x 800 mm complete all as specified and as shown on drg . |
| 80 | S&F in replacement of old u/s new legs of size 25mm tube legs size as per existing complete all as specified and as shown drg. |
| 81 | Ditto all as per items No 77 but foot rest of size 25mm square tube steel complete all as specified and as shown on drg . |
| 82 | S&F in replacement of old u/s new hard rubber shoe with shape and size as per existing complete all as specified and as on shown on drg. |
| 83 | S&F in replacement of old u/s new EDHMR board of size 800x455x19 mm thick and screw to fix with 2 mm plastic beading provide all around the items complete all as specified and dircted and as shown on drg. |
| 84 | S&F in replacement of old u/s new sides of EDHMR board of size 380x140x19mm thick with 2mm thick plastic beading all around the item complete all as specified and dircted and as shown on drg. |
| 85 | S&F in replacement of old u/s new partition made of EDHMR board of size 370x120x19mm thick with 2mm thick plastic beading all around the item complete all as specified and dircted. |
| 86 | M&L for removal of denting at deshaped portion at desk frame and applying one coat of synthetic enamel OG paint with spray gun machine complete all as specified and as shown on drgs. |
| 87 | RACK PIGEON HOLES (STEEL)/ALMIRAH PIGEON HOLES: DRG NO FD-1037 (Item No 87 to 92) : S&F in replacement of old u/s new MS sheet shape and size as per existing for LHS and RHS of Pigeon hole steel and applying two coats of synathic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 88 | S&F in replacement of old u/s new 1mm thick MS sheet complete all as specified and as shown on drgs. |
| 89 | S&F in replacement of old u/s new brass lock of 6 lever complete all as specified and as shown on drg . |
| 90 | S&F in replacement of old u/s new 1mm thick MS sheet complete all as specified and as shown on drg |
| 91 | S&F in replacement of old u/s new leg made of angle iron 40X40X4mm thick, Angle iron welded to 1mm thick MS sheet complete all as specified and as shown on drg. |
| 92 | M&L for removal of dents at deshaped portion of rack pigen holes (steel) cleaning of rusted surface with repaired parts under item 87 to 91 above including preparation of patched by applying two coats of grey/olive green systhetic enamel paint on internal surfaces over a coat of putty and hammertone/olive green synthetic enamel paint on external surfaces by spray gun machine complete all as specified and as shown on drg. |
| 93 | SCREEN MOVEABLE TUBLER STEEL WITH CLOTH: FD-83 (Item No 93 to 98) : S&F in replacement of old u/s new caster wheel of 50mm dia complete all as specified and as shown on drgs. |
| 94 | S&F in replacement of old u/s new legs of 25 mm dia MS tube (approx length 0.25 meter welded with 25 mm dia MS tube pipe) complete all as specified and as shown on drgs. |
| 95 | S&F in replacement of old u/s new bottom rail of 25 mm tube complete all as specified and as shown on drgs. |
| 96 | S&F in replacement of old u/s new GI Hook as per existing complete all as specified and as shown on drgs. |
| 97 | S&F in replacement of old u/s new curtain cloth green colour of approved quality with stitched at both rails and comprising 03 Nos in a set of size 136x111cm one number and 136x54cm two Nos with cloth hanging spring complete all as specified and as shown on drgs. |
| 98 | M&L for removal of dents at deshaped portion, derusting and cleaning of rusted surfaces by preparation of patches by applying putty and applying two coats of synthetic enamel paint white over a coat of red exide primer as required shed by spray gun complete all as specified and as shown on drgs. |
| 99 | STOOL STEEL 305X305X510 MM (Item No 99 to 102) : S&F in replacement of old u/s new legs made of 16 gauge MS sheet complete all as specified and as shown on drgs. |
| 100 | S&F in replacement of old u/s new stiffeners made of 16 gauge MS sheet complete all as specified and as shown on drgs. |
| 101 | S&F in replacement of old u/s new top 16 gauge of MS sheet size and shape as per existing complete all as specified and as shown on drgs. |
| 102 | M&L for removal of dents at deshaped portion and scraping off complete old paint by paint remover and sand paper, derusting, cleaning off rusted surfaces including preparation of patches by applying putty and applying two coats of olive green synthetic enamel paint over a coat of red oxide primer by spray gun on internal & external surfaces complete all as specified and shown on drg. |
| 103 | TABLE BED SIDE STEEL : HFD-2005/FD-133(M) & TP Godrej (Item No 103 to 112) : M&L for removal of dents at deshaped portion and scraping off complete old paint by paint remover and sand paper , derusting and cleaning off rusted surface and sand paper inside and outside including preparation of patches by applying putty and applying two coats of synthetic enamel paint (white) over a coat of red oxide primer with spray gun complete all as specified and as shown on drgs. |
| 104 | S&F in replacement of old u/s new legs made of 25 mm dia 1.6mm thick MS tube150 mm long as exists complete all as specified and as shown on drgs. |
| 105 | S&F in replacement of old u/s new long rail made of 20 mm dia and 1.6 mm thick MS tube 500 mm long complete all as specified and as shown on drg. |
| 106 | S&F in replacement of old u/s new short rail made of 20 mm dia and 1.6 mm thick MS tube 300 mm long complete all as specified and as shown on drg. |
| 107 | S&F in replacement of old u/s new mild steel chromium plated handle as per existing shape & size complete all as specified and as shown on drgs. |
| 108 | S&F in replacement of old u/s new hinges as per existing table bed side steel complete all as specified and as shown on drgs. |
| 109 | S&F in replacement of old u/s new top of size 600x380 made of premlaminated EDHMR board 18/19mm thick exterior grade both side laminated one side teak face other side white balancing bonded with BWP type phenol formaldehyde synthetic resin with 2mm thick plastic decorative beading all around top and fitted with steel screw to frame of steel table complete all as specified and as shown on drgs. |
| 110 | S&F in replacement of old u/s new steel top made of 20 gauge thick plain MS sheet and applying two coats white synthetic enamel paint over a coat of red oxide primer to match with existing surface complete all as specified and as shown on drgs. |
| 111 | S&F in replacement of old u/s new shutter made of 20 gauge thick plain MS sheet complete all as specified and as shown on drgs. |
| 112 | S&F in replacement of old u/s new hard rubber shoe as per existing complete all as specified and as shown on drgs. |
| 113 | STEP STEEL (2&3 TIERS) : FD-13 (Item No 113 to 117) : S&F in replacement of old u/s new sheet made out of 18 gauge MS sheet of size 460x230mm and welded with frame complete all as specified and as shown on drg. |
| 114 | S&F in replacement of old u/s new back side legs of 18 gauge tube shape as existing complete all as specified and as shown on drg. |
| 115 | All as per item No 113 above but front side leg of height not more than 150mm complete all as specified and dircted. |
| 116 | S&F in replacement of old u/s new caster wheel without rubber for front legs complete all as specified and as shown on drg. |
| 117 | M&L for removal of dents at deshaped portion and scraping off completely old paint by paint remover and sand paper , derusting and cleaning of rusted surface inside and outside including preparation of patches by applying putty and two coats of synthetic enamel paint (white) with spray gun over a coat of red oxide primer complete all as specified and shown on drg. |
| 118 | TABLE INVALID : FD-131 (Item No 118 to 121) : S&F in replacement of old u/s new stainless steel 18 gauge of size 1070x460x1mm thick complete all as specified and as shown on drgs. |
| 119 | S&F in replacement of old u/s new legs made of 25mm dia with 20 gauge steel tube shape and size as per existing complete all as specified and as shown on drgs. |
| 120 | S&F in replacement of old u/s new 50mm dia ball bearing rubbers caster finish complete all as specified and as shown on drgs. |
| 121 | M&L removal of dents at deshaped portion and scraping of completely old paint by paint remover and sand paper, de-rusting and cleaning of rusted surfaces including preparation of patches by applying putty and two coats of synthetic enamel paint (white) over a coat of red oxide primer with spray gun machine complete all as specified and shown on drg. |
| 122 | TROLLEY HOT FOOD: FD-133 (Item No 122 to 126) : S&F in replacement of old u/s new tubular Element Voltage 1250 volts 230/AC DC complete all as specified and as shown on drgs. |
| 123 | S&F in replacement of old u/s new multistage rotary switch as per existing for heat control complete all as specified and as shown on drgs. |
| 124 | S&F in replacement of old u/s new glass wool on heating chamber as per existing shape complete all as specified and as shown on drgs. |
| 125 | S&F in replacement of old u/s new stanless steel food vessel of 200mm dia & 200mm depth with lead as per existing complete all as specified and as shown on drgs. |
| 126 | S&F in replacement of old u/s new heavy duty ball bearing type 200mm dia rubber wheel collapseable counter 390x500mm complete all as specified and as shown on drgs. |
| 127 | TROLLY SOILED LINEN SINGLE AND DOUBLE UNIT : FD-132 (Item No 127 to 132) : S&F in replacement of old u/s new canvas bag as per size and shape as per existing complete all as specified and as shown on drgs. |
| 128 | S&F in replacement of old u/s new bottom frame made of 19mm dia circular tube bottom frame and applying two coat sof synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 129 | S&F in replacement of old u/s new legs made of 19mm dia circular tube legs and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 130 | S&F in replacement of old u/s new stiffner made of 19mm dia tube stiffner and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 131 | S&F in replacement of old u/s new 50mm dia caster wheel complete all as specified and as shown on drgs. |
| 132 | M&L for removal of dents at deshaped portion and scraping of complete old paint by paint remover and sand paper, de-rusting and cleaning of rusted surfaces including preparation of patches by applying putty and two coats of synthetic enamel paint (white) by spray gun machine over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 133 | PATIENT TROLLY STRUCTURE :TP (Item No 133 to 135) : S&F in replacement of old u/s new 1mm thick stainless steel top design as per existing complete all as specifed and as shown on drg. |
| 134 | S&F in replacement of old u/s new heavy duty brass bearing 75mm dia rubber wheel collapseable complete all as specified and as shown on drgs. |
| 135 | M&L for removal of dents at deshaped portion, de-rusting and cleaning of rusted surfaces and scraping off complete old paint by paint remover and sand paper including preparation of patches by applying putty wherever required and applying two coats of synthetic enamel paint (white) with spray gun over a coat of red oxide primer on all steel surfaces complete all as specified and as shown on drgs. |
| 136 | TABLE LABORATORY: FD-140 (Item No 136 to 144) : S&F in replacement of old u/s new stainless steel sheet of size 3'x12'x1mm thick and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 137 | S&F in replacement of old u/s new 19mm thick block board of size 3'x4'x12' BWR grade( ISI:303-1885) with shape and size complete all as specified and as shown on drgs. |
| 138 | S&F in replacement of old u/s new front drawer and drawer made of block board with teak veneer block board required size of drawer 2x370x260mm complete all as specified and as shown on drgs. |
| 139 | S&F in replacement of old u/s new shutter with size and shape as per existing complete all as specified and shown on drg. |
| 140 | S&F in replacement of old u/s new top rail of size 660x50x25mm made of 1st class hard wood teak (MP) free from knots cracks etc with permissible moisture contents complete all as specified and shown on drg. |
| 141 | All as above item No 136 but stiffner of size 800x50x25mm complete all as specified and as shown on drgs. |
| 142 | All as above item No 136 but legs size of 100x50x50mm complete all as specified and as shown on drgs. |
| 143 | All as above item No 136 but side stiffner size of 760x50x25mm complete all as specified and as shown on drgs. |
| 144 | M& L for preparation of surface with sand paper after scrubbing and applying two coats of french polish to table laboratory including to the parts repaired under item No. 136 to 143 to the required gloss to match as per existing complete all as specified and as shown on drgs. |
| 145 | TABLE PREPARATORY SS TOP DRG NO :TP (Items No 145 to 148) : S&F in replacement of old u/s new 1mm thick stainless steel top of table preparatory with size and shape as per existing complete all as specified and as shown on drgs. |
| 146 | S&F in replacement of old u/s new 25mm tube legs with shape & size as per existing and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 147 | S&F in replacement of old u/s new 25mm tube frame with shape and size as per existing and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 148 | M&L for removal of dents for the deshaped portion and scraping off completely old paint by paint remover and sand paper of table preparatory cleaning off rusted surface with repaired/replaced under item No 145 to 147 above including preparation of patches by applying putty and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 149 | THREE SEATED STEEL CHAIR POWDER COATED(TP) (Item No 149 to 150) : S&F in replacement of old u/s new sheet of steel chair made out of MS Sheet shape and size as per existing & applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 150 | S&F in replacement of old u/s new legs for three seater steel chair made of powder coated MS sheet and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as shown on drgs. |
| 151 | ICU Bed (Item No 151 to 159) : S&F in replacement of old u/s new 125mm twin wheel casters with diagonal (Set of 04 Nos) complete all as specified and as shown on drg. |
| 152 | Taking down /out old unserviceable hydraulic jack of Side Rails, Head and Foot Panel and fixing new hydraulic jack for Compliant Polymer Molded Side Rails and Head and Foot Panel (02 x Nos = 1 Set) complete all as specified and as shown on drg. |
| 153 | S&F in replacement of old u/s new buffers on all four corners and Foot Panel complete all as specified and as shown on drg. |
| 154 | S&F in replacement of old u/s new 10cm Four Section Mattress for Fowler & ICU Beds complete all as specified and as shown on drg. |
| 155 | S&F in replacement of old u/s new urine bag hook complete all as specified and as shown on drgs. |
| 156 | S&F in replacement of old u/s new ACP (Nurse Control Panel) as per existing complete all as specified and as shown on drg. |
| 157 | S&F in replacement of old u/s new oxygen bottle arrangement as per existing complete all as specified and as shown on drg. |
| 158 | S&F in replacement of old u/s new Under Bed Light as per existing complete all as specified and as shown on drg. |
| 159 | S&F in replacement of old u/s new hydraulic lifting pole as per existing complete all as specified and as shown on drg. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender