Tender For special Repair Of 25 X Fol Sheds For Flame Proof & Spark Proof Electric Wiring Alongwith Accessories Of 202 Pet Pl Asc (Fol Depot) Under Ge Hisar At Hisar Mil Stn
Tender Value
34.15 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
68300
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hisar → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair Of 25 X Fol Sheds For Flame Proof & Spark Proof Electric Wiring Alongwith Accessories Of 202 Pet Pl Asc (Fol Depot) Under Ge Hisar At Hisar Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including taking out existing unserviceable terminal boxes & conduit with switches/ sockets/ fan regulators and fittings such as ceiling rose, pendants, tube light fittings, lamp holders, brackets light fittings, rectangular blocks, DB, MCB etc. and making good disturbed surface of walls, floors etc. to match with the existing surface etc complete all as specified and directed. |
| 2 | M&L for point wiring for one light point, controlled by one, one way switch with 1.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade including 1.5 Sqmm single core PVC insulated and unsheathed multistranded copper conductor FRLS cable 1100 Volt grade as continuous earth wire in green colour to common earth and connected to earth dolly laid/drawn into and including cutting chases in walls and including concealed steel conduit 20mm dia medium grade (ISI marked) with all fittings such as tees, bends etc including sunk type pressed modular steel box covered with white modular cover plate and frame for housing switches, sockets, fan regulators etc complete, all as specified & directed. |
| 3 | All as per item No 2 above but for one exhaust fan/ wall fan controlled by one oneway switch. |
| 4 | All as above item No 2 above but using 2.5 Sqmm copper conductor FRLS cable for 15 Amps sockets on independent board and using 2.5 Sqmm PVC insulated unsheathed single core multi strandard copper conductor FRLS cable 1100 volts as earth wire. |
| 5 | Supply and fixing flameproof switch rotary type with termination box in LM6, 6/16A, single pole 250V complete all as specified and directed. |
| 6 | Supply and fixing Flameproof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and directed. |
| 7 | Supply and fixing Flameproof ceiling rose 3 terminal PVC polycorbonate isolated body complete all as specified and directed. |
| 8 | Supply and fixing 100 Watt flameproof LED highway Light, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and directed. |
| 9 | S&F Flameproof enclosure distribution board 4 way, incl with one incoming and six outgoing MCBs suitable for mounting on wall confirming to IP66 size 760x560x300mm with min 200 Amp rating copper bus bar, complete all as specified & directed. |
| 10 | S&F submain wiring with two runs of single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 1.5 sqmm, 1100 votls grade drawing through and including concealed steel conduit 20mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 1.5 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge. |
| 11 | S&F wiring with two single core cable PVC insulated unsheathed of copper multi stranded conductor FRLS cable of size 2.5 sqmm, 1100 votls grade drawing through and including concealed steel conduit 20mm dia medium duty including acessories such as Tee, bend, Elbow etc, ISI marked with and including PVC insulated 2.5 sqmm unsheathed multistranded FRLS copper conductor cable for earth continuity and connected to common earth dolly including cutting chasing of wall, if required and making good disturbed surface in CM (1:3) and finishig the surface to match with existing surface, etc complete all as specified and directed by Engineer-in-charge . |
| 12 | M&L for earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m deep below normal ground level and connected to and including galvanized iron earth wire 4 mm dia by means of GI nuts, bolts, check nuts, washers thimbles, etc as shown in electrical plate No 3 of SSR Part-I and connection to main switch board/Test point/panel/equipment and testing on completion including excavation and earth work in any type of soil, returning filling in, and removal of surplus spoil to a distance not exc 50 metre, charcoal and salt in alternate layer 15 cm thick all around the earth plate electrode, MS funnel with wire mesh, GI pipe medium grade 20 mm bore for watering and 15 mm bore upto 7.50 metre long GI pipe light grade for earth wire protection fixed with poles/wall with two clamps, made from MS flat 25 mmx3mm, bolts, nuts and washers, PCC chamber (1:3:6) type C1, 40mm thick precast RCC cover 1:2:4 type B1 shall be provided on CI frame etc complete including taking down old earthing all as specified & as directed.Note :- PCC chamber shall be constructed at least 1.5m away from the earth electrode and pipe for watering shall be provided in planting manners. |
| 13 | Supply & fixing Aluminum Flameproof wall mounted fans 230 volts single phase oscillating 600 mm sweep suitable for wall mountingcomplete all as specified and directed. |
| 14 | Supply & fixing Aluminum Flameproof Exhaust Fan 450 mm, 230 volts single phase oscillating 450 mm suitable for wall mounting complete all as specified and directed. |
| 15 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4 core complete all as specified and directed. |
| 16 | Supply and laying double wall corrugated pipe (DWC) confirming to IS 19430 Part -I of size 50mm outer dia and 38mm inner dia complete all as specified and as directed. |
| 17 | Excavation in trenches in soft/loose/hard/dense soil n exc 1.50 meter wide and n exc 1.50 meter in depth for foundation of pole, laying cable etc and getting out etc complete all as specified and directed. |
| 18 | Returning, filling in including spreading, leveling, watering and well ramming in layers n exc 25 cm thick etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender