Tender For New Street Light Work In Shrimadhopur Board Area Sikar
Tender Value
10.50 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
1 days left
EMD
21000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sikar → Rajasthan
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for New Street Light Work In Shrimadhopur Board Area Sikar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Oct-2026 | date Corrigendum | Date | 02-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and drawing of XLPE insulated LT Aerial bunched Aluminium conductor cableconfirming to IS 14255/1995 and IS 398 (Pt-4)/ 1994 and as per Discom Specs. on existingcross arms through I hook with all necessary T&P required including binding and twistingetc. complete in all respect as required. All as per pre approved by Engineer in-charge. Foradditional technical parameters of products/ work , refer Annexure \\"A\\" attached with thisBSR |
| 2 | 1 X 25 sq. mm. + 1X25 sq. mm. (insulated) |
| 3 | Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made outas per standard Discom's specifications with two coats of Red oxide and two coats ofAluminium paint etc. as required. All as per pre approved by Engineer in-charge.Foradditional technical parameters of product / work refer Annexure 'A' attached with thisBSR |
| 4 | Suspension clamp with eye hook & Pole clamp |
| 5 | Dead end clamp with eye hook & Pole clamp |
| 6 | P & Fixing Powder coated CRCA sheet enclosures on existing angle iron frame by means of nuts and bolts and making holes , Din rail etc. as required.For technicalparameters of product / work refer Annexure 'A' attached with this BSR |
| 7 | 2.0 mm thick |
| 8 | Providing & Fixing of AC operated heavy duty 230 /440 Volt power contactor as per PWDspecification for electrical Works, ISI marked IS/IEC 60947-4-1 : 2000 having provision ofmechanical interlocking, auxilary contacts, Din rail mounting type including makingconnections, testing etc. as required. All as per pre approved by Engineer in-charge. Foradditional technical parameters of products/ work , refer Annexure \\"A\\" attached with thisBSR . |
| 9 | 4 pole Power contactors with following AC 1 Rating 25/32 Amp.Amp |
| 10 | Providing & Fixing of mechanical / digital time switch having following day / weekprogramme and minimum 100 hours reserve and AC1 rating of 16-20 amperes includingmaking connection, programming conforming to IEC 60730-1 and 60730-2-7 etc. asrequired. All as per pre approved by Engineer in-charge. For additional technicalparameters of products/ work , refer Annexure \\"A\\" attached with this BSR |
| 11 | One day & week reserve (Analog type ) |
| 12 | Pipe Earthing as per IS:3043- 1987 with 3.0 Mtr. Long, 40 mm dia. ' B ' class G.I. Pipe IS:1239 (Part-1) 2004, Equivalent to BS : 1387 with perforated holes of 12 mm dia ,includingall accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy dutyweather proof poly-propylene earth pit chamber with lockable Jam free lid suitable forsafe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layerssalt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required& must record by engineer in-charge during site visit and ensure to enter in measurmentbook.All as per pre approved by Engineer in-charge. For additional technical parameters ofproducts/ work , refer Annexure \\"A\\" attached with this BSR |
| 13 | Supply & Laying following size earth wire in horizontal or vertical run inground/surface/recess including riveting, soldering, saddles, making connection withGI/Cu purity purity >95% thimble etc. as required. All as per pre approved by Engineer incharge.For additional technical parameters of products/ work , refer Annexure \\"A\\"attached with this BSR |
| 14 | 8 SWG G.I. ( Hot Dipped ) Wire |
| 15 | Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity(B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulsewithstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimumphase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contactprotection and fitted in existing distribution board/sheets, minimum electrical operation20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating includingmaking connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDAaccrediated lab type test reports & All as per pre approved by Engineer in charge. Foradditional technical parameters of product / work refer Annexure 'A' attached with thisBSR |
| 16 | Single pole MCB 6 A to 32 A rating |
| 17 | Four pole MCB (With B/C curve tripping Characteristics)40 A rating |
| 18 | P & F in position frame made out of M.S. angle (riveted or welded) finished with two coatsof red oxide and two coats enamel paint including cutting, welding, holes etc.of followingsizes as required.For additional technical parameters of product / work refer Annexure 'A'attached with this BSR |
| 19 | 25mm x 25mm x 5mm |
| 20 | P & F paper phenolic resin bonded laminates confirming to IS : 2036 - 1995 for boxes/frames including making holes for switches etc, with brass screws, washers/ zinc platednut and bolts as required. For additional technical parameters of product / work referAnnexure 'A' attached with this BSR |
| 21 | 6.4 mm thick |
| 22 | Supply and fixing of following LT Supporting accessories with nut bolt & Clamps made outas per standard Discom's specifications with two coats of Red oxide and two coats ofAluminium paint etc. as required. All as per pre approved by Engineer in-charge.Foradditional technical parameters of product / work refer Annexure 'A' attached with thisBSR |
| 23 | LT cross arm 600 mm long with clamp |
| 24 | Supply and fixing of LT porcelain shackle insulator as per IS:1443 1979 and as per Discom'sstandard specifications, suitable for working voltage 1100 volts including all accessorieslike GI Hardware fittings confirming to IS:7935/1975 (latest amended) Nut, Bolt etc. asrequired. All as per pre approved by Engineer in charge.For additional technicalparameters of product / work refer Annexure 'A' attached with this BSR |
| 25 | 75mm x 90mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 02, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 1 dayNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender