Tender For Installation & Energisation Of 80 Nos. Community Lift Irrigation Projects (Bkvy-Ridf-2025-26 And 2026-27) And 7 Nos. Revival Defunct Lips And Reinforcement 43 Nos. Old Operable Lips(State Plan 2026-27) In Bisra, Kuarmunda, Lathikata, Nuagaon,
Tender Value
16.38 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
1 days left
EMD
16384
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Sundargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Installation & Energisation Of 80 Nos. Community Lift Irrigation Projects (Bkvy-Ridf-2025-26 And 2026-27) And 7 Nos. Revival Defunct Lips And Reinforcement 43 Nos. Old Operable Lips(State Plan 2026-27) In Bisra, Kuarmunda, Lathikata, Nuagaon, Rajgangpur, B Onai, Gurundia, Koida And Lahunipada Block Under Sundaragada District - Gumlei - Iii
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 2 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 3 | Cement concrete (1:4:8) with 4cm size h.g.b. hand broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 4 | Cement concrete (1:2:4) with 12mm size black h.g.b. hand broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 5 | Fly Ash Brick work with C.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge. |
| 6 | Fly Ash Brick work with C.B. Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in Super Structure. complete as per the Engineer-incharge. |
| 7 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 8 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge. |
| 9 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28 days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 10 | Supply fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification. |
| 11 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 12 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge. |
| 13 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 14 | Painting of two coat enamel paint of approved quality and colour for painting over iron work including cost taxes etc. complete as per the direction of the Engineer-incharge. |
| 15 | Writing charge of required information and data on both side of the transperancy pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 16 | Supply of solvent cement of approve quality for joiniting of PVC Pipe with all cost and all tax etc. complete as per the direction of the Engineer-incharge. |
| 17 | Cost of outlet |
| 18 | Labour charges for Installation and delivery fitting including fitting of Sluice Valve, NR Valve, Air Release Valve, PVC Tee and lowering of pump and transportation etc complete. fixing suction and delivery pipe to motor, NR Valve, Foot Valve, Sluice Va |
| 19 | Cost of Sign Board / Digitilation of Pre Post Photo / Display Board in ACP Sheet with Informatory Information including fixing etc all. |
| 20 | Labour charges for Fitting of un plasticised 200mm dia PVC Pipe for following inside dia mtr. for all classes of pipe including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge. |
| 21 | Electrical Earthing |
| 22 | Electrical installation and energisation |
| 23 | 100 mm Ø G.I. Pipe |
| 24 | 100 mm Ø G.I. Bend |
| 25 | 100 mm Ø C.I. Foot Valve |
| 26 | 100 mm Ø G.I. Flange |
| 27 | 12.5 HP monoblock pumpset having 0.028 cusec discharge and 24 Mtr. Head |
| 28 | 200 mm Ø PVC. pipe (Cl-I) 2.5 kg/cm2 |
| 29 | 200 mm Ø PVC. pipe (Cl-II) 4 kg/cm2 |
| 30 | 100 mm Ø C.I.Reflux Valve (NR) |
| 31 | 50 mm Ø Air release valve with saddle & Raiser pipe |
| 32 | 200 mm Ø PVC Bend |
| 33 | 200 mm Ø PVC End Cap |
| 34 | 200 mm Ø M.S. Coupler |
| 35 | 200 mm dia PVC coupler (4kgf/cm2) |
| 36 | Cost of Rubber Insertion, Nut Bolt etc. |
| 37 | 160mm x 110 mm fabricated M.S.reducer |
| 38 | 100 mm x 100 mm x 25 mm G.I. Priming Tee |
| 39 | Cost of 4.0mm2 PVC Single Core Copper Wire |
| 40 | 200 mm x 200 mm x 110 mm Ø weld less G.I. Tee |
| 41 | 200x200x200 mm dia PVC equal Tee |
| 42 | Control Panel star delta starter upto 15HP |
| 43 | 63 Amp main switch |
| 44 | Motor hood |
| 45 | Motor Base Plate including pannel base plate |
| 46 | 6 KVAR Capacitor |
| 47 | 3/16 mm2 T.D. cable |
| 48 | Construction of 3 phase 11 KV HT line as per REC standard confirming to IE Rules 1956 with 400 kg 10 M long PSC Pole with 55 Sqmm AAA Conductor average span 50mtr , 11 KV \\"V\\" Cross arm required No.of 11 KV T C Disc. polymer Insulators in tension point with spike provision |
| 49 | Construction and erection of 11 /0.4 KV , 25 KVA (Level-II,Star-II)Double Pole mounted Substation with 5mtrx3mtrx1.5mtr height mesonary toe wall /G.I. Flat fencing boundary wall with Flat with Polymer insulator ,L.T Dist Box with MCCB , Aluminim bus bar of single bay including tapping pole with material and spike provision |
| 50 | Construction of 3 Phase L.T line as per REC standard confirming to RE rule 1956 with 300Kg 9 Mtr long PSC pole support in 30M span length with 3x35mm² +1x25 mm ² LT, AB cable with coil earthing device, LT dead end clam, Suspension clamp with spike provision Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 2 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender