Tender For Shifting Of Electrical Assets (Poles With Lines And Transformers) Coming Between The Canal Covering From Call Tax To Saurab Hotel, Haldwani Under Edd (Town) Haldwani
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Nov 2026
2 days left
EMD
75000
Bank guarantee accepted
Document Fee
2360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nainital → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Shifting Of Electrical Assets (Poles With Lines And Transformers) Coming Between The Canal Covering From Call Tax To Saurab Hotel, Haldwani Under Edd (Town) Haldwani
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Oct-2026 | Date Extenson 1 | Date | 12-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Total amount of the \\"Rate Schedule\\" sheet Schedule of Quantity and Rate for Work of Shifting of Electrical assets (poles with lines and transformers) coming between the canal covering from Call Tax to Saurab Hotel, Haldwani under EDD (Town) Haldwanii. Against E-Tender Specification No. 59/EDC(H)/2026-27 Name of The Bidder's Firm: 0.0 Sl. No. Description of Work Unit Qty Rate Amount Part [A] (Supply Portion) |
| 2 | Holding Clamp for SP-55 with N/B |
| 3 | LT CLAMP WITH N&B ST POLE SP-55 |
| 4 | Stay Clamp for SP-55 With Nut & Bolt |
| 5 | MS CLAMP WITH N&B FOR DISTRIBUTION BOX |
| 6 | SHACKLE INSULATOR 75X90 mm WITH NUT BOLT |
| 7 | STAY INSULATOR |
| 8 | BRACING CLAMP FOR ST POLE WITH N&B |
| 9 | ACSR DOG (INSULATED/COVERED) |
| 10 | LT DISTRUBITON BOX 3 PHASE |
| 11 | Al. Lug Long Barrel 120 sq. mm. |
| 12 | Al. Lug Long Barrel 240 sq. mm. |
| 13 | Al. Lug Long Barrel 400 sq. mm. Total - Part [A] 0.0 Part [B] (Labour Portion) |
| 14 | Chemical Earthing:Earthing of distribution transformer including digging of pit of size 2.5 Mtr depth and make hole of size 150 mm. Placing of earthing electrode (to be supplied by contractor as per drawing No. A) as drawing B, connecting the same with G.I. Strip (to be supplied by contractor ) of size 35x6 mm as per drawing C for a minimum lenght 6 m. treatment of soil with highly condctive substance as per IS 30343 complete in all respect, result of earthing resistance to be recroded in M.B. before and after installation of earthing. The earth resistance after earthing should be less than 1 Ohm. |
| 15 | Erection & Earthing of support with M.S. Earth rod of 2.5 meter long by hammaring of M.S. Rod to proper depth and conecting the earth electrode with the helpof G.I. Wire as per construction mannual |
| 16 | Fabrication of M.S. Channel Angle iron after cutting in required sizes with drilling of holes upto good finish for top channel, bracing and special type bracket etc. as per RESSPO sehedule and local approved drawing. |
| 17 | RE-ALIGNMENT OF TPMO |
| 18 | EXCAVATION OF PIT FOR STAY SET |
| 19 | Grouting of stay in size 0.6x0.6x0.3 in CC ratio 1:4:8 (1 cement : 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of cement, sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESPO Manuel . |
| 20 | Excavation of earth for pole pit of size 0.9x0.6x1/6 of full length of pole for erection of pole in all type of soil including proper dressing of sides and ramming of bottom including getting out the excavated soil and disposal of surplus excavated soil as directed complete work |
| 21 | Erection of following Single support pole in proper level and alignment alongwith fixing of all accessories, like top channel & clamps as per RESSPO construction Manual. i ERECTION OF SINGLE SP-55 POLE NOS 52.0 ii ERECTION OF SINGLE SP-72 POLE NOS 1.0 |
| 22 | Erection of SP-55 Double support pole in proper level and alignment alongwith fixing rjf dil accessories, like top channel, X-bracing & clamps as per RESSPO construction Manual. |
| 23 | ERECTION OF SP-55(11KV/33 KV) FOUR POLE |
| 24 | Grouting of pole in size 0.45x0.45x1/5 of the support in CC ratio 1:4:8 (1 cement: 4 graded stone 20mm nominal size : 8 coarse sand ) block including cost of Cement,sand and stone ballast back filling of soil and boulders in pit and ramming and proper alignment, leveling as per RESSPO construction Manual. |
| 25 | Muffing of poles size 0.45 cm x 0.60 cm radious with cc 1:3:6 (1 cement: 3 coarse sand : 6 graded stone 10mm nominal size) block size 45cm height from ground level including cost of cement, stone and sand etc. |
| 26 | DISMANTLING OF SP-55 SINGLE POLE |
| 27 | DISMANTLING OF SP-55 DOUBLE POLE |
| 28 | DISMANTLING OF SP-55 FOUR POLE |
| 29 | DISMANTLING OF 11 KV LINE(RABBIT) |
| 30 | DISMANTLING OF LT LINE 3 P 5 W(WEASEL) |
| 31 | DISMANTLING OF 25 KVA DTR |
| 32 | DISMANTLING OF 63 KVA DTR |
| 33 | DISMANTLING OF 100 KVA DTR |
| 34 | DISMANTLING OF 250 KVA DTR |
| 35 | DISMANTLING OF 400 KVA DTR |
| 36 | DISMANTLING OF GUARDING IN 11 KV LINE |
| 37 | INSTALLATION OF LT PRMC |
| 38 | EXCAVATION OF EARTH FOR DTR PLINTH |
| 39 | CEMENT CONCRETING WORK DTR PLINTH |
| 40 | BRICK WORK IN 1:4 RATIO DTR PLINTH |
| 41 | RR MASSONARY WORK FOR DTR PLINTH |
| 42 | RCC WORK OF DTR PLINTH. |
| 43 | CEMENT PLASTER ON DTR PLINTH |
| 44 | Providing and fixing of 50x35 wire mesh around the plinth duly welded with frame of MS Angle Iron 35x35x5 mm and strip in size 35x5mm in the middle of each side along with the wire mesh (width of wire mesh 1.1 mtr) with the height of 1.0 mtr above the plinth with one number gate and locking arrangement complete duly painted with two coats of Al. paint. (All material will be arranged by the contractor) |
| 45 | INST. OF 400/500 KVA DTR ON POLE |
| 46 | INST. OF 250 KVA DTR ON POLE STRUCTURE |
| 47 | INST. OF 100 KVA DTR ON POLE STRUCTURE |
| 48 | INST. OF 63 KVA DTR ON POLE STRUCTURE |
| 49 | INST. OF 25 KVA DTR ON POLE STRUCTURE |
| 50 | Mounting & Fixing of TPMO on double pole structures including making of connections complete work |
| 51 | Mounting & Fixing of Fuse sets on double pole structures including making of connections complete work |
| 52 | Mounting & Fixing of TPMO on double pole structures including making of connections complete work |
| 53 | LAYING OF DOG CONDUCTOR IN HT LINE |
| 54 | LAYING OF 3P 5W LT LINE (RABBIT) |
| 55 | Guarding of Line over (Telephone / Road / L.T. line crossing as per drawing with 6/8 SWG G.I. wire including fixing of guarding channel/ angle as per RESSPO manual. LT./11KV /33KV |
| 56 | CARTAGE SP-55 POLE, 0-20 KM |
| 57 | CARTAGE OF PETTY MATERIAL,0-20 KM |
| 58 | DISCONNECTION & RECONNECTION OF CONsumer |
| 59 | DISMANTLING OF AB CABLE |
| 60 | SERVICE OF HYDRA MACHINE |
| 61 | TIGHTENING OF STAY SET |
| 62 | DIGGING OF PIT THROUGH HAMMER AT CC, DAM |
| 63 | BACK CARTAGE OF PETTY MATERIAL,0-20 KM |
| 64 | LAYING & FIXING LT XLPE CABLE |
| 65 | LAYING, SAGGING OF COVERED COND FOR 11KV |
| 66 | LAYING OF 11 KV CABLE |
| 67 | LOOPING AND CHOPPING OF TREE BRANCHES Total - Part [B] 0.0 TOTAL [Part-(A) + Part (B)] 0.0 GST: Extra Place Date Superintending Engineer Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 31, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 12, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender