Tender For Tirupathur District Mlacds 2026-27 Construction Of New 30000 Liter Oht(12M Stagging) At Nayanacheruvu In Nayanacheruvu Panchayat Natr Alli Block Packageno.02
Tender Value
Ref. Documents
Estimated cost
Bid Submission
10 Nov 2026
14 days left
EMD
36000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tirupathur District Mlacds 2026-27 Construction Of New 30000 Liter Oht(12M Stagging) At Nayanacheruvu In Nayanacheruvu Panchayat Natr Alli Block Packageno.02
BOQ
| Sl. No. | Item Description |
| 1 | Construction of New 30000 Liter OHT(12m stagging) at Nayanacheruvu in Nayanacheruvu Panchayat |
| 2 | Earth work excavation below G.L. and depositing on bank within an initial lead of 10.00 m and an initial lift of 2.00 for the following classification of soil |
| 3 | Sand filling for foundation with M sand including cost of sand,watering,ramming and consolidation etc complete as directed by Departmental officers |
| 4 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 5 | Cement Concrete 1:1-1/2:3 (One Cement, One and a half crushed stone M.Sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three M.Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 6 | (A). Below 1.5m from GL |
| 7 | (B). 0m to 1.50m below GL |
| 8 | (C). 0m to 1.00m above GL |
| 9 | (D). 1.00m to 4.50m above GL |
| 10 | (E). 4.50 m to 7.32 m above GL |
| 11 | (F). 7.32 m to 10.98 m above GL |
| 12 | (G). 10.98 m to 14.64 m above GL |
| 13 | (H). 14.64 m to 18.30 m above GL |
| 14 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 15 | I. Plane Surface |
| 16 | (A). Below GL |
| 17 | (B). From GL to 3.30m |
| 18 | (C). From 3.31m to 4.30m |
| 19 | (D). From 5.31m to 6.30m |
| 20 | (E). From 6.31m to 7.30m |
| 21 | (F). From 8.31m to 9.30m |
| 22 | (G). From 9.31m to 10.30m |
| 23 | (H).From 11.31m to 12.30m |
| 24 | II. Square Column |
| 25 | (A). Below GL and upto 3.30m above GL |
| 26 | (B). From 3.31m to 4.30m ht |
| 27 | (C). From 4.31m to 5.30m |
| 28 | (D). From 5.31m to 6.30m |
| 29 | (E). From 6.31m to 7.30m |
| 30 | (F). From 7.31m to 8.30m |
| 31 | (G). From 8.31m to 9.30m |
| 32 | (H). From 9.31m to 10.30m |
| 33 | (I).From 10.31m to 11.30m |
| 34 | (J).From 11.31m to 12.30m |
| 35 | III. Curved Surface - upto 3.30m ht. |
| 36 | (A). upto 3.30m ht. |
| 37 | (B). From 3.30m to 4.30m ht |
| 38 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire) |
| 39 | Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 40 | Providing outside M.S Ladder of 45cm wide made out of 50x50x6mm MS angle for sides and steps fixed at 30 cm centre to centre etc.and providing of Landing slabs with hand rails using 32mm GI pipe and 40mmx6mm MS flat etc. as per approved design |
| 41 | Providing Hand rails over the Roof slab by using 32 mm GI Pipe with 40mm x 6mm MS Flat and fixed with 12mm dia Fastner Bolt 75mm long and as directed by Departmental officers |
| 42 | Providing and fixing of RCC inner access ladder in RCC 1:1.5:3 (One cement, one and half sand and three aggregates) using 20mm HBG stone for OHT including cost of reinforcement, placing grill in position, centering shuttering charges, mixing concrete curing etc., |
| 43 | Providing GI Ventilation arrangement 2 nos mosquito proof nylon net with 65 mm GI pipe and spls as directed by the Departmental officers 1 m 65 mm Gi pipe, 4 nos 65 mm Gi elbow , 4nos cutting and 8 nos threading and 2 nos 65 mm GI tee |
| 44 | Providing cut stone slab in CM 1:3 of size 0.3 m x 0.3 m x 0.15 m and as directed by Departmental officers |
| 45 | Providing manhole cover of size 0.60 x 0.60M in RCC 1:1.5:3 with suitable reinforcement and 50x50x6mm MS angle fixed along edges and as directed by Departmental officers (Page no.172 Sl. No:229) |
| 46 | Provision for pipe connection arrangements for inlet, outlet scour and overflow etc. including cost of pipes, specials, valve, labour charge for lifting, aligning, cutting, threading, fixing and painting of GI pipes with two coats of approved quality enamel paint |
| 47 | 65mm dia GI pipes |
| 48 | 75mm dia PVC Threaded coupler |
| 49 | 65mm dia GI Tee |
| 50 | 65mm dia GI Elbow |
| 51 | 65mm dia GM Gate valve |
| 52 | 65mm dia GI Flangeset |
| 53 | 65mm dia GI Coupling |
| 54 | 65mm GI Dummy |
| 55 | 63 mm PVC 4Ksc Pipe |
| 56 | 63 mm PVC Bend |
| 57 | 75mm X 90mm PVC Reducer |
| 58 | 90mm dia PVC Threaded coupler |
| 59 | Refilling the foundation with excavated earth including consolidation as directed by the Departmental officers |
| 60 | Provision for Name Board Charges etc |
| 61 | Provision for Photo charges |
| 62 | GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \\"BB\\" for all works in this package} Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 14 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender