Tender For Construction Of 4X5.00 Mtr. Span Minor Bridge On Panga Nala At Remaining Portion Of Atheha Jariyari Kumbhi Aima Umrar To Pinjari Sentha Link Road With Approach Road In Distt. Pratapgarh
Tender Value
1.27 Crore
Estimated cost
Bid Submission
31 Oct 2026
7 days left
EMD
8.40 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Pratapgarh → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 4X5.00 Mtr. Span Minor Bridge On Panga Nala At Remaining Portion Of Atheha Jariyari Kumbhi Aima Umrar To Pinjari Sentha Link Road With Approach Road In Distt. Pratapgarh
BOQ
| Sl. No. | Item Description |
| 1 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m. transporting to site, spreading, grading to required slope and compacting to meet requirement of table No. 300.1 & 300.2 with lead upto 1000 m as per Technical Specification Clause 301.5 The compacted thickness of each layer shall not be more then 200 mm. including Labour Cess but excluding GST. Approach Road. |
| 2 | Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at O.M.C.and compacting with vibratory roller to achieve the desired density for Grading 1 as per MORD Specification complete as per clause 401 including Labour cess and Royalty but excluding GST. |
| 3 | Providing, laying, spreading and compacting stone aggregates of 63-45 mm sizes to water bound macadam G-2 specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 2 as per Technical Specification clause -405 (2)A including Labour cess and Royalty but excluding GST. |
| 4 | Providing, laying, spreading and compacting stone aggregates of 53-22.4 mm sizes to water bound macadam G-3 specification including spreading in uniform thickness, hand packing, rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 3 as perTechnical Specification clause -405(3)A including Labour cess and Royalty but excluding GST. |
| 5 | Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means as per Technical specification clause - 502(I) including Labour cess and Royalty but excluding GST. |
| 6 | Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Technical specification clause - 503 including Labour cess and Royalty but excluding GST. |
| 7 | Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity, finished to required level and grades to followed by seal coat as per Technical specification clause - 508 including Labour cess and Royalty but excluding GST. |
| 8 | Providing and laying seal coat Type C by manual means with 80/100 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall as per Technical specification clause - 510(III)(I) including Labour cess and Royalty but excluding GST. |
| 9 | Construction of Subgrade and Earthen Shoulders with approved material obtained from borrow pits with all lift and leads transporting to site, spreading, grading to required slope and compacting to meet requirement of table No. 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1 The compacted thickness of each layer shall not be more then 200 mm. including Labour Cess but excluding GST. |
| 10 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. including Labour Cess but excluding GST. (For RCC culvert) |
| 11 | Plain Cement OPC-43 grade Concrete in Open Foundation complete as per Drawing and Technical PCC Grade M-15 Cement OPC grade 43 including Labour cess and Royalty but excluding GST., as per MORTH Specification No.-1500, 1700 & 2100 |
| 12 | R.C.C. grade M 25 Providing and laying reinforced cement OPC-43 grade concrete in sub structure using batching plant transit mixer & Concrete pump as per drawing including Labour cess and Royalty but excluding GST., as per MORTH Specification No.-1500, 1700 & 2100 |
| 13 | Supplying, Fitting and Placing un-coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specification No. 1600 including Labour cess and Royalty but excluding GST. |
| 14 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications. Ref. to MoRTH Specification No 2706 & 2200 including Labour cess and Royalty but excluding GST. |
| 15 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. Ref. to MoRTH Specification No 710.1.4.of IRC:78 and 2200. including Labour cess and Royalty but excluding GST. |
| 16 | Providing and laying Pitching on APRON laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per MORTH Specification No. 2504 including Labour cess and Royalty but excluding GST. |
| 17 | Providing and laying OPC-43 grade Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications including Labour cess and Royalty but excluding GST. as per MORTH Specification No.-1500, 1700 & 2100 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 31, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 7 daysOct 31, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender