Tender For Providing E-Sewa Kendra In Counter Arrangements First Floor Of Combined Court Building At Tirupathur, Tirupathur District
Tender Value
2.94 Lakhs
Estimated cost
Bid Submission
11 Nov 2026
17 days left
EMD
3000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tirupathur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing E-Sewa Kendra In Counter Arrangements First Floor Of Combined Court Building At Tirupathur, Tirupathur District
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and Fixing Vertical Blinds Premium including cost, conveyance and all other matericals and labours involved etc., complete and as directed by the departmental officers. |
| 2 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m, Centre mullions: 63.50x38x3mm@ 1.55 kg/m, Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column, masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 3 | Fabricting Supplying and fixing in position Aluminium door Poweder Coated of size 1.00mx2.10m having Single leaf openable shutter 1/3 panelled & 2/3 glazed with 10 mm thick aluminium grill of approved pattern and design and 12mm thick best quality both sides prelaminated particle board and 5.5mm thick plain glass shall be used for panelling withAluminium section of Outer Frame:101.60x44.45x3.18mm @ 2.319kg/m and Shutter frame of bottom rail: 100x44.45x2.50mm @ 1.974 kg/m, Top & Vertical rail: 50x44.45x2.50mm @ 1.292kg/m, Lock rail: 50x44.45x2.50mm @ 1.292kg/m, Aluminium clips: 17.15x17.27x1.50mm @ 0.176kg/m and with required aluminum hinges, door stopper, rubber beading, PVC felt, handle for a length of shutter (both sides) of section: 100x30mm @0.988kg/m, locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm aluminium tower bolt 200x12mm 1No., aluminium door stopper with rubber bush 2Nos., lock-1No., Floor Spring Each.,as per BIS standards including cost of all materials |
| 4 | , labour charges and power consumption charges required for fabrication including chipping dismantling and making holes to the required extent in RCC in column/beam/masonry with power drill wherever neccessary and redoing the damaged portion to the original condition after fixing etc. complete complying with standard specification and as directed by the deparmental officers. All Aluminium section shall be used in electrically controlled condition in accordance with IS 1868/1962 for an average anodic film thickness of 15 microns etc., complete. |
| 5 | Supplying and fixing Computer table size 3' x 2' Premium Quality including cost of fixing in position of transportation loading unloading conveyance charges etc complete complying with standard specification. |
| 6 | Supplying and fixing Computer table size 4' x 2' Premium Quality including cost of fixing in position of transportation loading unloading conveyance charges etc complete complying with standard specification |
| 7 | Supplying and placing in position Premium Quality Rolling Chair including cost of fixing in position transportation, loading unloading conveyance charges etc complete complying with standard specification |
| 8 | GST 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 11, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender