Tender For Construction Of P.H.C Buliding (Health Institution Level Ii) At Salihar, Tehsil Khundian, Distt. Kangra (H.P). (Sh:- Construction Of Main Building Including Water Supply & Sanitary Installation, Septic Tank And Rain Water Harvesting System
Tender Value
1.10 Crore
Estimated cost
Bid Submission
29 Oct 2026
5 days left
EMD
2.21 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kangra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of P.H.C Buliding (Health Institution Level Ii) At Salihar, Tehsil Khundian, Distt. Kangra (H.P). (Sh:- Construction Of Main Building Including Water Supply & Sanitary Installation, Septic Tank And Rain Water Harvesting System & Site Development ).
BOQ
| Sl. No. | Item Description |
| 1 | Earth work/cutting in excavation work by mechanical means (Hydraulic excavator)/ manual means in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, blasting work (soft & hard) and conglomerated rocks including chiseling or wedging out rocks where blasting is prohibited or other mix variety of soil including removal of bushes etcetera including dewatering pumping or bailing out water upto any height depths complete filling depression where required including getting out the excavated soil and disposal of surplus excavated soils complete.( Recovery of stone to the tune of 239.034 cum ( Rupees two hundred thirty nine paise zero thirty four per cubic metre ) quantity at the rate of 300 ( Three hundred )/- per cubic metre be effected from the contrctor's running bills on prorata basis as per actual quantity executed) including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 2 | Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of intermediate soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimeter) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming and watering and then disposing of all surplus excavation earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 3 | Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification. The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 4 | Providing and laying cement concrete 1:4:8 (One cement isto four sand isto eight aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, including cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 5 | Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, including cost of form work in foundation and plinth, retaining walls/protection works as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 6 | Providing and laying Damp Proof Course 50mm (Fifty millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetre nominal size) mechanically mixed including cost of form work and curing complete, as required at site as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of materials within all leads lifts and other incidential. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 7 | Applying a coat of hot bitumen (mexphalt) 80/100 (Eighty by hundred) or VG-10 using 1.70 kg (one decimal seven) kilogram per square meter on damp proof course after cleaning the surface with a piece of cloth lightly socked with kerosene as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 8 | Providing Plinth protection with 60 mm (Sixty millimetres) thick Pre-Polished interlocking paver blocks of NTC/Unistone/ PRIME Crete / NITCO/GICO make with 23cm (Twenty three centimetres) diametre Half round reinforced cement concrete pipe for drainage purpose fixed over 10cm (Ten centimetres) thick cement concrete 1:5:10 (One cement isto five sand isto ten graded) stone aggregate bedding complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 9 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 400 kg/cum (at the rate Four hundered kilogram per cubic metre) or as per approved design mix for foundation and footing all works upto plinth level to give a smooth machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 10 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty five newton per square millimetre) with cement contents not less than @ 400 kg/cum (at the rate Four hundered kilogram per cubic metre) or as per approved design mix for columns, pillars, piers, abutments, posts and struts etc all works upto floor five level to give a smooth machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 11 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-25 (M-Twenty five) design mix to obtain the minimum compressive strength of 25N/mm2 (Twenty newton per square millimetre) for reinforced cement concrete work with cement contents not less than @ 400 kg/cum (at the rate Four hundered kilogram per cubic metre) or as per approved design mix in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, corbelling, staircases and spiral stair cases above plinth level up to floor five level to give a smooth mechanically mixed and vibrated inclusing curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 12 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, Footings bases of columns and mass concrete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 13 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in walls in any thickness upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 14 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like floor etcetra including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 15 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Shelves (in cast situ) etcetra upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 16 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams haunchings, cantilevers bressumers and lintels upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 17 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular, polygonal in plain in all floor level. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 18 | Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Stair cases (except spiral stair cases) with slopping or stepped soffits excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 19 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in small lintels not exceeding 1.50 mtr clear span, moudings, windows, cills etcetra upto all depths in all floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 20 | Providing form work with steel plates of 3.15mm (three decimal one five milimeter) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimeter) so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 21 | Providing, hoisting and fixing above plinth level up to floor five level precast required centering, shuttering but , including cost of reinforcement, with 1:1.5:3 (One cement isto one decimal five isto three course sand) graded stone aggregate 20 mm (Twenty millimetre) nominal size for RCC bracket(75x75 cm.) in Balcony including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 22 | Providing, laying, straightening and fabrication in position Tor steel reinforcement of TISCO/SAIL/JINDAL-PANTHER/ RINL steel for reinforcement thermo mechanically coated bars of grade Fe 500D for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor levels as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 23 | Second class brick work using common burnt clay building F.P.S. (non modular) bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor levels as per PWD specification, drawing and design and curing complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 24 | Second class half brick work using common burnt clay building F.P.S. (non modular) bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure as per PWD specification, drawing and design and curing complete including scaffolding. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 25 | Providing and fixing 18 mm (Eighteen millimetre) thick (area of slab over 0.50 sqm (zezo decimal five zero square metre) Baroda Green marble gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete including scaffolding and cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 26 | Providing and fixing 25mm dia (Twenty five millimetre diametre)stainless steel (SS-302) curtain rod having wall thickness of 1.25mm (One decimal two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 27 | Providing and fixing angle iron cupboard frames manufactured from M.S.Angle iron section 25X25X5mm (Twenty five into twenty five into twenty five millimetre) thickness including hinges jamb,lock jamb,beed and if required angle thrashold of mild steel angle 25X25 mm (Twenty five into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel Butt Hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after preteatment of the surface. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 28 | Providing and fixing 19mm (Nineteen millimetre) thick HDHMR/BWP board ( Green Ply/Action Tessa/Century Ply, Green Ply)) water proof shutter for cup boards including fixing with nickle plated piano hinges with screw etc. complete in all respect and specification as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 29 | Providing and fixing 19mm (Nineteen millimetre) thick BWP/HDHMR commercial (Green ply /Century Ply -710) board in shelve/ box for cupboard with butt joints and fixing with nails and screw etcetera complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 30 | Providing and fixing 6mm (Six millimetre) thick water proof plywood (BWP) (Green Ply/Century ply) in lining with butt jointing including mitring at junctions and nails etcetera complete (framework for ways to be measured and paid for separately) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 31 | Providing and fixing 1 mm (One millimetre) thick coloured or plain lamination sheet (Green Ply/Century ply) on boards/ply wood sheets with approved adhesive and nails etc complete. The all cut portion of shelves shall be finished with 6mm (Six millimetre) hard wood edging as per the direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidental.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 32 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding including carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 33 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 34 | Providing and fixing 50 mm (Fifty millimetre) size special quality chromium plated brass cupboard locks with four levers of approved quality including necessary screws etc. complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 35 | Providing and fixing 50 mm (Fifty millimetre) chromium plated brass cupboard or wardrobe knobs with nuts complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 36 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer ISI Marked with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 37 | Providing and fixing 300x16mm (Three hundred into Sixteen millimetres) aluminium sliding door bolts, ISI marked Powder coated/ anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 38 | Providing and fixing 250x16mm (Two hundred fifty into Sixteen millimetres) aluminium sliding door bolts, ISI marked Powder coated/ anodised (anodic coatingnot less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 39 | Providing and fixing aluminium 250x10mm (Two hundered fifty into Ten millimetres) nominal size Tower bolts, ISI marked Powder coated required colour or shade, with nuts and screws etcetera. complete, including carriage of material wi/of thin all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 40 | Providing and fixing aluminium200x10mm (Onw hundred fifty into ten millimetre) nominal size Tower bolts, ISI marked Powder coated required colour or shade, with nuts and screws etcetera. complete, including carriage of material wi/of thin all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 41 | Providing and fixing single rubber stopper aluminium hanging floor door stopper,ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etcetera complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 42 | Providing and fixing magnetic catcher Triple strip vertical type of approved premium quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 43 | Providing and fixing factory made M.S. Single Rebate Frame (Chaukhat) size 100mm x 50mm of 2mm thickness sheet of APOLLO/ TATA make for doors, windows and ventilators complete, joints mitred and flush butt welded and including providing and fixing of Stainless steel butt hinges of size 100 mm and 2.5 mm thickness with welding and necessary secrews complete all as per approved design and fixing frame with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 44 | Providing and fixing anodised/powder coated aluminium work for frame of doors, windows, ventilators and glazed partitions of Jindal/Hindalco/Balco/ Nalco aluminium with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS:1285 anodised transparent or dyed to required shade according to IS : 1868. (Minimum anodic coating of grade AC-15) fixed with rawl plugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera (Section No. 14081 of Jindal / Hindalco etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleat angle, aluminium, snap beading for glazing/panelling C.P. brass/stainless steel screws all complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 45 | Providing and fixing powder coated/ anodised (Minimum anodic coating of grade AC-15) aluminium work for shutters of doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of Jindal /Hindalco/BALCO/ NALCO approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 46 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer in-charge . (Cost of aluminium snap beading shall be paid in basic item With glass panes of Modi Gaurd 5 .5 mm thickness (weight not less than 12.50 kg/ sqm) complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 47 | Providing and fixing Fly proof stainless steel wire gauge to doors, windows and clerestory windows with M.S. flat 15x3mm (Fifteen into three millimetre) and nut and bolts complete stainless steel (Grade-304) wire gauge of 0.5mm (Zero point five millimetre) dia wire and 1.4mm (One point four millimetre) wide aperture with matching wood beading on both side complete including entire carriage of material within all leads, lifts and other incidentals,as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 48 | 30 mm ( thirty millimetre )thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30mm (sixty into thirty millimetre) and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The stylesand rails mitred and joint at the corners by means of M.S. galvanised/ plasticbrackets of size 75x220 mm having wall thickness 1.0 mm and stainless steelscrews. The styles of the shutter reinforced by inserting galvanised M.S. tubeof size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm)wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S.'U' cleats. Theshutter frame filled with a uPVC multi- chambered single panelof size not less than 620 mm, having over all thickness of 20 mm and 1 mm (±0.1 mm) wall thickness . The panels filled vertically and tie bar at two places bynserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per architectural drawings specifications, design and as per the directions of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 49 | Providing and fixing 35 mm (Thirty five millimetres) thick ISI marked flush door shutters of Green ply/Kit Ply/Century ply conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges 2.5 mm thick with necessary screws as per approved architectural drawing, design and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 50 | Providing and fixing 100mm (hundred millimetre) diametre M.S. pipe in Steel work in single sections including cutting,hoisting,fixing in position and applying a priming coat of red lead paint in Flats including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 51 | Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in trusses and trussed purlin, Rafters, Purlin in main truss and dormer etcetra with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 52 | Providing and fixing M.S. fan clamp type-1 of 16mm dia (sixteen millimetre diametre) M.S. bar bent to shape with hooked ends in R.C.C. slab during laying including painting the exposed portion of loop, all as per standard design complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 53 | Steel work welded in built up sections trusses and frame work including cutting hoisting and fixing in position and applying a primer coat of red lead paint in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 54 | Providing and fixing moulded hand rail of M.S hollow pipe 50mm (Fifty Milimetre) dia welded in straight length over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be measured & paid separately) . The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 55 | Providing and laying 25mm (Twenty five millimetre) thick Mirror polished Kota stone slab 55x55cm (fifty five into fifty five centimetre) in flooring laid over 20mm (twenty millimetre) thick base of cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing nosing and moulding complete where ever required upto all floor levels as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 56 | Providing and laying Kota stone Single Slab 20mm (Twenty millimetre) thick in risers of steps, skirting, dado and pillars laid on 12mm (Twelve millimetre) (average) thick cement mortar 1:3 (One cement isto Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 57 | Providing and laying 20mm (Twenty millimeter) thick Kota stone Single slab including Moulding and double round nosing / edging in treads of steps complete laid on 20mm (twenty millimeter average thick cement mortar 1:4 (one cement isto four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etcetera up to all floor level, complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 58 | Providing and laying 600x1200 (Six hundred into Twelve hundred millimeter) size Full body vertified tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make in Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany /Orient Bell /Johnson &Johnson in floors, treads and landing in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) in desired pattern with 3mm Groove, Grouting of joints with epoxy grout of approved make in required shade/colour complete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 59 | Providing and laying 600x1200 (Six hundred into Twelve hundred millimeter) size Full body vertified tiles (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make in Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany /Orient Bell /Johnson &Johnson all colours and shades, and pattern in skirting, riser of steps laid over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) in desired pattern with 3mm groove and including grouting joints with epoxy grout of matching/required shade/Colour of approved make complete in all respect and specification as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 60 | Providing and laying Anti skid /Matt finish Vitrified floor tiles of size 600x600/ 450x450 mm (thickness to be specified by the manufacturer)(Six hundred into Six hundred millimeter and Four fifty hundred into Four fifty hundred millimeter ) of 1st quality conforming of Premium Quality of ORIENT BELL/NITCO/KAJARIA/ JOHNSON/SIMPOLO /SOMANY IS : 15622 of approved make in colours in floors laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with in desired pattern with 3mm groove and including grouting joints with epoxy grout of matching/required shade/Colour of approved make complete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 61 | Providing and laying 300x600 mm (Three hundered into six hundered fifty millimetres) vitrfied HD Glazed tiles of Nitco/AGL / RAK / SIMPOLO / Kajaria / Somany / Orient Bell /Johnson&JOhnson in skirting, risers of steps and dados with 12 mm cement mortar 1:3 (One cement isto three sand) laid over and jointed in desired pattern with 3mm groove and including grouting joints with epoxy grout of matching/required shade/Colour of approved make complete as per approved drawing, design, specifications and as per directions and entire satisfaction of the Engineer-In-Charge, including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 62 | Providing and laying 40 mm (Forty millimetre) red sand stone thick fine dressed stone flooring over 20mm (average) thick base of cement mortar 1:5 (One cement isto five coarse sand) with joints finished flush complete as per approved specification, drawing and design and entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In- Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 63 | Providing and fixing 110mm dia (One hundred ten millimetre diametre) single socketed pipe on wall face unplasticised Rigid PVC rain water pipes (Finolex/Supreme/Astral/ Vectus make) conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 64 | Providing and fixing Coupler 110mm dia. (One hundred ten millimeter) on wall face unplasticised - PVC moulded fittings/ accessories (Finolex/Supreme/Astral/ Vectus make) for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.complete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 65 | Single pushfit Coupler 110mm (One hundred ten millimetre)Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories (Finolex/Supreme/Astral/ Vectus make) for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 66 | Providing and fixing Bend 110mm (One hundred ten millimeter) on wall face unplasticised - PVC moulded fittings/ accessories ( Finolex/Supreme/Astral/ Vectus make) for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.complete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 67 | Providing and fixing 0.60mm (zero point sixty millimeter) thick prepainted steel sheet of TATA-DURASHINE in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete with all accesoriees as required as per the direction of Engineer-in-charge. complete in all respect and specification as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 68 | Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets of TATA-DURASHINE in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete with all accessories as required as per the direction of Engineer in Charges. complete in all respect and specification as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 69 | Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet TATA-DURASHINE in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. complete in all respect and specification as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 70 | Providing and fixing 15cm (Fifteen centimetre) wide, semi circular uPVC gutter with all finishes of approved such as with iron brackets 40x3mm (Forty into three millimetre) siz, bolts, nuts and washers etcetra including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 71 | Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL/JSW for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 72 | Applying a plaster drip course/ groove in plastered surface or moulding to R.C.C. projections as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 73 | Providing 15mm (fifteen millimeters) thick cement plaster on rough side with cement mortar 1:4(one cement isto four sand) in single coat on rough side of brick/concrete/ stone walls for exterior/interior plastering up to all floor level including curing, arrise, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 74 | Providing 15mm (fifteen millimeters) thick cement plaster on fair side with cement mortar 1:6 (one cement isto six sand) in single coat on rough side of brick/concrete/ stone walls for exterior/interior plastering up to all floor level including curing, arrise, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth as per approved drawing, design and specifications and as per directions and entire satisfaction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 75 | 6mm (six millimeter) cement plaster 1:3 (one cement isto three sand) in ceiling complete including curing complete as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 76 | Providing and applying white cement based putty ( Birla white/JK) of average thickness 1 mm,of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 77 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre of approved manufacturer ( Asian /Nerolac/ Berger/Dulex) and of required shade and colour all complete to achieve even shade and colour on New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre omplete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 78 | Finishing walls with Luxury Professional Premium Weather Guard Exterior Emulsion (two or more coats) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Tinted Glass Range) with silicon additives.: New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge..The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 79 | Wall painting (two or more coats) with Premium acrylic emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 80 | Providing and fixing 150mm (One hundred fifty millimetre) oxidized aluminium single acting spring hinges with necessary screws etc.complete. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 81 | Providing and laying Dr. fixit torch shield (P-3160-3m) four courses water proofing treatment with bitumen felt over roofs consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 kg per sq .m (One decimal four five kilogram per square metre) of area for each course second course of roofing felt type 3 grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm (Six millimetre) and down size or pea sized gravel spread at 0.006 cum per sq.m. (zero decimal zero zero six cubic metre) including preperation of surface excluding grading complete including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 82 | Providing and fixing MS railing for stair case having balluster of 19mm x19mm (nineteen into nineteen millimetre) square bar with a clear height of 85cm (Eigthy five centimetre) embedded in cement concrete steps and jointed with electrical/gas welding at top along with MS flat of 40mmx6mm (Forty millimetre into sixteen millimetre) size complete with a applying priming coat of red lead paint as per drawing specification and as per direction of Engineer-in-charge. complete with a priming coat of read paint as per specification and direction of the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 83 | Excavating trenches for Pipes, cables etc. exceeding 80 mm dia (Eighty millimetre diametre) but not exceeding 300 mm dia (Three hundred millimetre diametre) of rincluding excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m (One decimal five metre), including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (Twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc.and disposing of surplus excavated soil as directed, within a lead of 50 m : as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 84 | Providing and fixing White Vitreous china water closet squatting pan (HINDWARE) Cat No 20090 of size 530x 410mm (five hundred thirty into four hundred ten millimetre ) (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern of similar make, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect and specification as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 85 | Providing and fixing white viterous china water closet (EWC) of Hindware (Edge single piece, Cat No 92562) of size 63.5x37.5x75.5 cm ( sity three into thirty seven point five into seventy five point five)with Jet pressure and of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required complete in all respect and specification as directed by the Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 86 | Providing and fixing White Vitreous China wash basin with full padestal of size 550x400x800 mm (HINDWARE-10098) with single hole for pillar tap including 15mm (Fifteen millimetre) diametre Pillar Tap of long body of Continental series of Jaquar, 32mm C.P. brass waste coupling (ALD-CHR-705 of Jaquar) with C.I. or M.S. brackets painted white including cutting holes and making good the same including neccessary fitting complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 87 | Providing and Fixing wall mixer 15 mm F-330019 of HINDWARE/ Jaquar of approved quality (superior or heavy type) and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 88 | Providing and fixing 40mm (Forty millimetre) diametre C.P. brass waste (Heavy duty make) ISI marked NO-8931 & 8934) of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 89 | Providing and fixing 600x450mm (Six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) Exotica make complete with 6 mm (Six milimeter) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 90 | Providing and fixing 600mm (Six hundred into one hundred twenty into five millimetre) long glass-shelf or chrome (ACN-CHR-1171N) complete fixed with 40mm (Forty millimetre) long screws, rawl plugs etcetera, complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 91 | Providing and fixing C.P. brass toilet paper holder of preferred make (ACN-CHR-1151N) complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 92 | Providing and fixing 110 mm (One hundred ten millimetre) diameter high pressure PVC FINOLEX/SUPREME/ VECTUS/ ASTRALType high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 93 | Providing and fixing 90 mm (Ninty) diameter high pressure PVC FINOLEX/SUPREME/ VECTUS/ ASTRALType high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 94 | Providing and fixing fittings Clamp of high pressure PVC FINOLEX/SUPREME/VECTUS/ASTRAL 110mm (One hundred ten millimetre) diameter ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 95 | Providing and fixing fittings Clamp of high pressure PVC FINOLEX/SUPREME/VECTUS/ASTRAL 90 mm (Ninty) diameter ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 96 | Providing and fixing PVC single equal branch with oval access door FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked insertion rubber washer 3 mm tick bolts and nuts complete 110mm (One hundred ten millimetre) diametre ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 97 | Providing and fixing PVC single equal branch with oval access door FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked insertion rubber washer 3 mm thick bolts and nuts complete 75mm (Seventy five millimetre) diametre ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 98 | Provdng and fixing PVC double equal branch FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked complete including fixing with approved adhesive etc. complete 110mm (One hundred ten millimetre) diametre ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 99 | Provdng and fixing PVC double equal branch FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked complete including fixing with approved adhesive etc. complete 90 mm (Ninty) diametre ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 100 | P/F PVC door bend with ovalaccess door, insertion rubber washer 3 mm thick bolts and nuts 110mm (One hundred ten millimetre) diametre FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 101 | Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts complete 90 mm (Ninty) diametre FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 102 | Providing and fixing PVC collar 110mm (One hundred ten millimetre) diametre FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 103 | Providing and fixing PVC collar 90 mm (Ninty) diametre FINOLEX/SUPREME/VECTUS/ASTRAL ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 104 | Providing and fixing PVC floor trap of self cleaning design FINOLEX/SUPREME/VECTUS/ASTRAL including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110 mm X 75 mm (One hundred ten into seventy five millimetre) ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 105 | Cutting chases110 mm ( One hundred ten millimetre) in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( One cement isto threee course sand isto six graded stone aggregate 12.5 mm (Twelve decimal five millimetre) nominal size), including necessary plaster and pointing in cement mortar 1:4 (one cement isto four course sand) complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 106 | Cutting chases 90 mm (Ninty) in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( One cement isto threee course sand isto six graded stone aggregate 12.5 mm (Twelve decimal five millimetre) nominal size), including necessary plaster and pointing in cement mortar 1:4 (one cement isto four course sand) complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 107 | Providing and fixing 600mm (Six hundred millimetres) long single Towel Rail (ACN-CHR-1111SM) with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 108 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & Concealed work, including cutting chases and making good the wall etc.1216 (16 mm OD) pipe ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 109 | Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & Concealed work, including cutting chases and making good the wall etc.1620 (20mm OD) pipe ISI marked including fixing with approved adhesive etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 110 | Providing and fixing polythene aluminium polythene ( PE-AL-PE)2532- (32mm OD) pipe composite pressure pipe U.V. stabilized with carbon of KITEC confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etcetra but excluding the cost of fitting internal work pipe exposed on wall complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 111 | Providing and fixing 15mm (Fifteen millimetre) dia nominal bore G.I. pipes of TATA/JINDAL(HISAR) complete with G.I. fittings and clamps, including cutting and making good the walls etcetera Internal work-Exposed on wall complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 112 | Providing and fixing 20mm (Twenty millimetre) dia nominal bore G.I. pipes TATA/JINDAL(HISAR) complete with G.I. fittings and clamps, including cutting and making good the walls etcetera Internal work-Exposed on wall complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 113 | Providing and fixing 32mm (Thirty two millimetre) over flow pipes dia nominal bore G.I. pipes TATA/JINDAL(HISAR) complete with G.I. fittings and clamps, including cutting and making good the walls etcetera Internal work-Exposed on wall complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 114 | Making connection of G.I distribution branch with G.I main 25mm to 40mm (Twenty five millimetre to forty millimetre) nominal bore by providing and fixing tees including cutting and threading the pipe complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 115 | Fixing water meter and stop cock in G.I. pipe line including cutting and threading the pipe and making long screws etcetera complete (cost of water meter and stop cock to be paid separately) complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 116 | Providing and fixing 25mm (Twenty five millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete including carraige of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 117 | Providing and fixing 32mm (Thirty two millimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) complete including carraige of material within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 118 | Providing and fixing ball valve (brass) of approved quality, High or low pressure,with plastic floats complete 15 mm (Fifteen millimetre) nominal bore : with plastic floats complete 20 mm (Twenty millimetre) nominal bore of preferred make including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 119 | Providing and fixing unplasticised PVC connection pipe brass union 300 mm length 15mm dia ISI marked of fitting including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 120 | Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement isto five sand) cover with frame (light duty) 355mmx6mm internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 455x610x450mm deep single pipe line. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 121 | Providing and fixing 15mm (Fifteen millimetre) nominal bore G.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 122 | Providing and fixing 20mm (Twenty millimetre) nominal bore G.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 123 | Providing and fixing 32mm (Thirty two millimetre) nominal bore G.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 124 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank (SINTEX-TITUS) Tripple Layer White ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 125 | Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass bib cock of Continental series of Jaquar (CQT-CHR-23037) conforming to ISI standards including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 126 | Providing and fixing 15mm (Fifteen millimetre) nominal bore, C.P. brass Long Bib Cock of Continental series of Jaquar (SPJ-CHR-35429 PM) conforming to ISI standards including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 127 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass stop cock (concealed) of standard design and of approved make Continental series of Jaquar (COP-CHR-057PM) conforming to IS:8931 including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 128 | Providing and fixing Soap Disk Holder Dish (ACN-CHR-1131N) with concealed fitting arrangements including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 129 | Providing and laying cement concrete 1:5:10 (One Cement isto five Sand isto ten) graded stone aggregate 40mm (Forty millimetre) nominal size for haunching of pipes of the 150 mm ( One hundred fifty millimetre) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 130 | Construction of manhole with R.C.C. top slab in 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres nominal size), foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed stone aggregate 40mm (Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand istoFour graded crushed stone aggregate 20mm (Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 900x800mm (Nine hundred into Eight hundred milimetre) 1000mm (One thousand milimetre) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kg (twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 131 | Providing and laying 450 mm dia (Four hundred millimetre diametre) RCC pipes Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (One cement isto two fine sand) including testing of joints etc. complete s per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 132 | Excavation in drains and channels etc; in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etc. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts of materials and other incidentals.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 133 | Providing and laying cement concrete work of grade M20 mix design to obtain the minimum compressive strength 20N/mm2 (twenty newton per square millimetre) with cement contents not less than 330 kg/ cum with mechanically mixed and vibrated curing complete including the cost of centering, shuttering, finishing and reinforcement for reinforced concrete work in all type of structure upto plinth level and the like mass concrete as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 134 | Random rubble masonry with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto Twelve graded stone aggregate) 20 mm (Twenty millimetre nominal size) at plinth level in cement mortar 1:6 (one cement isto six sand ) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 135 | Providing and fixing 90 mm (Ninty) diameter single socketed pipe on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 136 | Providing and fixing 110 mm dia (One hundred ten millimetre diametre) single socketed pipe on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 137 | Providing and fixing 110x110x110 mm dia (One hundred ten into One hundred ten into One hundred ten millimetre diametre) single socketed tee with door on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (Ten millimetre) gap for thermal expansion complete in all respect as per specifications approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 138 | Constructing brick masonry chamber for under ground CI inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement : five sand) cover with frame (light duty) 355mmx6mm internal dimensions total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg) RCC top slab with 1:2:4 (one cement : two sand : four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10 (one cement : five sand : ten graded stone aggregate 40mm nominal size) in side plaster 15mm thick with cement mortar 1:3 (one cement : three sand) finished smooth with floating coat of neat cement on wall and bed concrete etc. complete. Inside dimension 600x600x750mm (Six hundred inti six hundred into seven hundred fifty millimetre) deep single pipe line. The rates are including cost and carriage within all leads and lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 139 | Constructing soak pit 1.20x1.20x1.20 m (One decimal two zero into one decimal two zero into one decimal two zero) filled with brickbats including S.W. drain pipe 100 mm (One hundred millimetre) diameter and 1.20 m (One decimal two zero metre) long complete as per approved specification and drawing including entire carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 140 | Providing and fixing 90 mm (Ninty) diametre PVC cowl ISI marked including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 141 | Stone filling tightly hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidental. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 142 | Providing and laying cement concrete 1:3:6 (One cement isto three sand isto six aggregate) graded crushed stone aggregate 20mm (Twenty milimetre) nominal size mechanically mixed and curing complete, including cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 143 | Providing and fixing 450mm (four hundred fifty millimetre) circular light duty rectangular C.I. manhole with frame cover weight 38KG (thirty eight kilogram) (single seat) including entire carriage of material within all leads, lifts and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 144 | Providing and fixing 110 mm (One hundred ten millimetre) diametre PVC cowl ISI marked including fitting within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. |
| 145 | Providing and laying 100mm (one Hundred millimeter) dia ISI marked VECTUS /FINOLAX P.V.C. pipe ( working pressure not less then 4 Kg per square cm) Weep Holes in brick masonry/stone masonry plain/ reinforcement concrete abutments, wing wall/ return wall, retaining walls and breast walls, extending through the full width of the structure with slope of 1(V): 20H (One vertical isto twenty Horizontal) towards drawing face complete as per drawing and MORD technical specification clause 614,709,1204.3.7 and as per the direction and entire satisfaction of Engineer-in-Charge complete, including carriage of materials with in all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax or any other taxes imposed by the Government but excluding GST. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysOct 29, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender