Tender For Renovation Of electrical installation & Fans For 128 Nos (Type Iii - 112 Nos & Type Iv - 16 Nos) Parcel-B Staff Qtrs At Baishnabghata Staff Qtr. Complex Under Ctd.
Tender Value
61.46 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
11 days left
EMD
1.22 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of electrical installation & Fans For 128 Nos (Type Iii - 112 Nos & Type Iv - 16 Nos) Parcel-B Staff Qtrs At Baishnabghata Staff Qtr. Complex Under Ctd.
BOQ
| Sl. No. | Item Description |
| 1 | SUB-HEAD-I: EI & Fans |
| 2 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. (Group A) |
| 3 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 4 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
| 5 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required |
| 6 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 7 | 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire |
| 8 | 6 X 1.5 sq. mm + 3 X 1.5 sq. mm earth wire |
| 9 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 10 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 11 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 12 | 3 x 1.5 sq. mm |
| 13 | 6 x 1.5 sq. mm |
| 14 | 3 x 6 sq. mm |
| 15 | 6 x 6 sq. mm |
| 16 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 17 | 20 mm |
| 18 | 25 mm |
| 19 | Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. |
| 20 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 21 | 8 Way, Double door |
| 22 | 12 Way, Double door |
| 23 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 24 | Single pole |
| 25 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 26 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 27 | 40A amps |
| 28 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts \\"C\\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 29 | Supplying and fixing 100w stepped type electronic fan regulator on the existing switch box including connections but excluding modular plate etc. as required. |
| 30 | Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required. |
| 31 | Supplying and fixing of 20 watt LED tube light fitting in replacement of old faulty tube light fixture i/c all its accessories complete as reqd.(Make: Philips, Model: Astraline or S. S. Make) |
| 32 | Supply of ceiling fan of 1200 mm sweep, 230V, 50Hz rating etc. complete as reqd. (Crompton Greaves, Model : Sea Bliss/S.S make) |
| 33 | Supply of exhaust fan of 300mm sweep, 230V, 50Hz and 1350 rpm rating on existing hole on wall etc. complete as reqd. (Crompton Greaves, Model: Drift Air 12\\"/S.S make) |
| 34 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, etc as required. |
| 35 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. a) Upto 450 mm sweep |
| 36 | Supplying & laying 1100 Volts grade PVC insulated PVC sheathed Copper conductor single core 2x 6 sq. mm. flexible cable in PVC flexible conduit on existing surface/cable tray, including proper fixing, making connection, providing cable lug, crimping, complete as reqd. (ISI marked). ( Meter to main Switch) |
| 37 | Supplying and fixing suitable size MS framework by 25x5 mm MS Flat and Angle, for fixing of DP MCB with sheet steel enclosure at the ground floor i/c cutting and grouting on wall, making good the damages etc complete as required |
| 38 | Dismantling of existing wiring for one quarter of following type i/c safe handling, lifting / loading / unloading etc and storing at desired place, as instructed by Site in-charge, within that Qtr complex etc complete as required. |
| 39 | Type-III Qtrs |
| 40 | Type-IV Qtrs |
| 41 | Sub Head-II (Earthing) |
| 42 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 43 | Providing and fixing 6 SWG dia G.I. wire on surface or in recessfor loop earthing as required. |
| 44 | Providing and laying earth connection from earth electrode with 6 SWG dia G.l. Wire in 15 mm dia G.l. pipe from earth electrode including connection with G.l. thimble excavation and re-filling as required. |
| 45 | Providing and fixing earth bus of 50 mm X 5 mm copper strip on surface for connections etc. as required. |
| 46 | Sub Head-III (Compound Light) |
| 47 | SITC of 75 Watt LED Compound light on the outside wall with suitable bracket to fix the same on the wall complete as required (Make: M/s Philips, Type: BRP032PLED 75CW SLR PSU GR SPD) or similar superior make. (For illumination of compound). |
| 48 | SITC of 30 Watt LED Compound light on the outside wall with suitable bracket to fix the same on the wall complete as required (Make: M/s Philips, Type: BRP330 LED 30CW R5NPC PSU S1 V1) or similar superior make. (For illumination of front side of each quarter block). |
| 49 | SMC weather proof loop-in loop-out boxes (GSJB 2014) (Syntex make) of inside dimensions- 195x135x90 mm with 1 No. 16A porcelain kit-kat fuse & 1 No. stud terminal |
| 50 | Supplying of 2 x 6 Sq. mm., aluminium conductor, PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade, ISI make. |
| 51 | Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. |
| 52 | a) Upto 35 sq. mm (clamped with 1mm thick saddle) |
| 53 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
| 54 | a) 2 X 6 sq. mm (19mm) |
| 55 | Painting MS compound light poles with one coat of metal primer and two coats of aluminium paint of reputed brand, including thorough cleaning/scrapping of rust, scale, and dirt from the surface, scaffolding, and all finishing works etc. complete as required. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender