Tender For Construction Of Tin Shed & Platform At Vikas Khand Airaya Gram Panchayat Khargupur Bargalaa Khaki Baba Ki Kuti, Fatehpur
Tender Value
7.93 Lakhs
Estimated cost
Bid Submission
29 Oct 2026
2 days left
EMD
8000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kanpur Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Tin Shed & Platform At Vikas Khand Airaya Gram Panchayat Khargupur Bargalaa Khaki Baba Ki Kuti, Fatehpur
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechnical means (Hydraulic excavator)/manual means in foundation trenches or drains, excavated soil and disposal of surplus excavated soil as directed by Engr. Incharge within a lead of 50 m including dressing of sides and ramming of bottoms, lift upto 1.5 m DSR 2.8.1 |
| 2 | Excating supply & filling of earth compacting….DSR 2.25A |
| 3 | Supply and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete DSR 2.27 |
| 4 | Providing and laying cement concrete 8:4:1 [Stone ballast 8 (40mm normal size) : 4 sand : 1 cement] and curing etc all complete. As per DSR 4.1.8 |
| 5 | RCC with 1:1.5:3 with cement, coarse sand and 20mm stone grit in foundation & footing including all materials, labours, T&P etc all complete. DSR 5.1.2 |
| 6 | Centering and shuttering including strutting, propping etc. and removal for foundation , footing ….etc DSR 5.9.1 |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting. bending, placing in position and binding all complete upto plinth level.. DSR 5.22.1 |
| 8 | Brick work with common burnt clay modular bricks of class designation 7.5 in Cement mortar 1:4 (1 cement: 4 coarse san foundation and plinth in: DSR 6.2.1 |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:4 (1 cement: 4 coarse san DSR 6.4.1 |
| 10 | 12 mm plaster of mix 1:4 (coarse 12 mm cement plaster of mix: 1:4 (1 cement: 4 coarse sand. DSR 13.4.1 |
| 11 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand): |
| 12 | Providing and applying white cement based putty of average thickness of 1 mm of approved brand and manufacturer over the wall surface to prepare the surface even and smooth including cost of materials, labours T&P etc all complete. DSR 13.26 |
| 13 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR13.48.1 |
| 14 | S/f of MS anchor bolt with nut 20 mm dia 60cm long with hold fast . |
| 15 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.DSR 10.16.1 |
| 16 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.D.S.R.10.2 |
| 17 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. D.S.R 12.50 |
| 18 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :DSR 12.51.1 |
| 19 | Gutter (600 mm over all girth) |
| 20 | Painging and varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & one coat of approved superiod quality ready mixed paint of clear synthetic varnish including supply of all materials labour and T & P etc. required for proper completion of the work paint to be used should confirm to the DSR 13.53.1 |
| 21 | P/L of information road signboard at site including all mateirla labour etc complete |
| 22 | Less 1% Labour Cess |
| 23 | Less 5% Department Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 29, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender