Tender For Construction Of 04 Additional Class Rooms, Kitchen Cum Store Room, Boundary Wall And Other Miscellaneous Work In High School Buchai. Tuiyo, Block- Barkatha, District- Hazariabg
Tender Value
2.21 Crore
Estimated cost
Bid Submission
07 Nov 2026
12 days left
EMD
4.42 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Hazaribagh → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of 04 Additional Class Rooms, Kitchen Cum Store Room, Boundary Wall And Other Miscellaneous Work In High School Buchai. Tuiyo, Block- Barkatha, District- Hazariabg
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item - A) and disposal of excavated earth to a distance up to 50m. Including all lifts with levelling ramming the foundation trenches removing roots of trees shurbs all complete as per approved design & building specification and direction of E / I .(5.1.1. BCD ) |
| 2 | Extra for earth work in hard soil as per specification and direction of E/I (vide classification of soil item) - ( 5.1.2 BCD) |
| 3 | Providing coarse clean sand filling in foundation trenches and plinth including ramming and watering in layers not exceeding 150mm thick with all leads & lifts including the cost of all materials, labour, royality, & taxes all complete as per building specification and direction of E/I (5.1.10 BCD) |
| 4 | Providing designation 75B one brick flat soling joints filled with local sand including the cost of watering taxes royality all complete as per building specification and direction of E/I..(5.6.3 BCD) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level:1:2:4(1Cement :2 coarse sand (zone-III):graded stone aggregate 20 mm nominal size). (5.3.1.2 BCD) |
| 6 | Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l. (5.2.6.BCD |
| 7 | Providing R.C.C. M-200 with nominal mix (1:1.5:3) in foundation with approved quality of stane chips 20mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 Excluding screeing, shuttering, mixing cement concrete in mixer and placing in position, vibrating, striking, curing, taxes and royalty all complete as per building specification and direction of E/I. ( 5.3.9.1 BCD) |
| 8 | Centering and shuttering including strutting, propping etc and removal of form for Columns(5.3.17.1 BCD) |
| 9 | Centering and shuttering including strutting, propping etc and removal of form for Foundations, footings, bases of caloumns etc., for mass concrete.(5.3.17.6 BCD) |
| 10 | Providing and laying in position specified grade of reinforced cement concrete in columns ,excluding the cost of centering ,shuttering , finishing and reinforcement -All work above plinth level up to floor five level)1:1.5:3(1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size). (5.3.10 BCD) |
| 11 | Providing designation 75 B brick work in C.M.(1 :6) in superstructure with approved quality of clean coarse sand of F.M. 2 to2.5 including providing 10 mm thick mortar joints cost of screening materials , scafolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l..(5.2.14 BCD ) |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarsesand(zone-III) : 3 graded stone aggregate 20 mm nominal size). ( 5.3.11 BCD) |
| 13 | Centering and shuttering including strutting, propping etc. and removal of form for Lintels, Beams, Plinth beams, girder, bressumers and cantilevers. (5.3.17.5 BCD) |
| 14 | Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors Roof, landing, balcony and access platfirm..(5 .3.17.3 BCD) |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for Weather shade, chajjas , corbels etc, including edges). (5.3.17.1 BCD) |
| 16 | Supplying, fitting and fixing 20 guage G.C.I sheet gate fitted on M.S. Angle frame of size 60x60x6 mm including cost of fabrication, providing necessary locking arragement with haskal and domny duly fixed in P.C.C (1:2:4) blocks of required size, applying a priming red lead paint over steel work, taxes all complete as per drawing specification and direction of E/I. . (5.5.29.BCD |
| 17 | Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I. . 8mm (5.5.4 BCD) |
| 18 | Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I. . 10mm (5.5.5 (a) BCD) |
| 19 | Providing TMT steel reinforcement 8mm dia. rod 12mm dia as per approved design & drawing excluding the carriage of M.S. rods (straight or in coils) to work site, cutting, bending, and binding with anneled wire with the cost of wire removel of rust placing the rods in position all complete as per building specification and direction of E/I. . 8MM (5.5.4 BCD) |
| 20 | S/F/F MS grill with ms grills made of 20x6 mm ms flat or 16 mm ms square bar do-do all (5.5.12 BCD) |
| 21 | Providing and fixing fan hook of 16 mm dia M.S. bar 1 Meter long bent to required size and shape , placed in position and fixed in R.C.C. slab / beam at the time of casting all complete as per building specification and direction of E/I (5.5.13 BCD ) |
| 22 | Providing and laying 25 mm, thickness stone slab flooring of approved size ,texture and colour over 19mm thick base of lime motar (1:1:1) (lime putty:surki: coare sand ) laid over and jionted with grey cement slurry mixed with pigment match the shade of slab including rubbing and polising to granolitic finish with approved quality of carbonadum stone including cost of curring ,taxes and rayolity all complete as per E/I. Size of tiles 600X600mm( 5.6.19 BCD ) |
| 23 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. (5.7.6 BCD) |
| 24 | Provinding 12 mm thick water proof cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. (5.7.3 BCD) |
| 25 | Providing two coat of oil bond distemper of approved shade and make over acoat of cement primer over new coat do - do all complete job (5.8.18 BCD) |
| 26 | Supplying fitting and fixing M.S. gate with M.S. grill made of 20x6 mm M.S. flats or 16 mm M.S square bars filled on 25x5x6 mm M.S. angle fram of size 60x60x6 mm ---do--do--- all complete job as per specification and direction of E/I. (5.5.30 BCD ) |
| 27 | Providing primer one coat of red lead paint painting with ready mixed paint of approved shade and make new steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.41 BCD) |
| 28 | Providing and applying while cement based putty of average thickness 1 mm of approved brand and manufacture over the plastered wall surface to prepare the surface even and smooth complete. (DSR 13.80 ) |
| 29 | Finishing walls with premium acrylic Smooth exterior paint...Applied @1.43 Ltr./ 10 Sqm over and including priming coat exterior primer applied @ 2.20 kg/10 sqm.( DSR 13.47.1 ) |
| 30 | Providing two coats of painting with ready mixed paint of approved shade and make over steel surface including cleaning the surface thoroughly cost of scaffolding and taxes all comple as per building specification and direction of E/I. (5.8.43 BCD ) |
| 31 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (5.3.8 ) |
| 32 | Provinding 19 mm thick water proof cement plaster (1:3) in roof with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. (5.7.15 BCD) |
| 33 | Providing two coats of snowcem of approved shade and make over a coat of cement primer on new surface including preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direcition of E/l. (5.8.24 BCD ) |
| 34 | Providing angle as per I.S. 226 65 x 65 x 6 / 8 / 10 mm (Gr. A) ( M-195 (b (ii)BCD)) |
| 35 | Providing barbed wire for fencing - 4 Point, 2 Ply, 12 SWG, 150mm (M-215 BCD ) |
| 36 | Labour for fitting and fixing barbed wire fencing in four rowshorizontal up to a height of 1.85 M and two diagonals includingfixing of post in cement concrete at 2.5 M centers including cost ofstaples (but excluding the cost of cement concrete angle iron post its cutting and making holes, nuts and bolts) all complete as perbuilding specification and direction of E/I. (5.5.22 BCD ) |
| 37 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore (18.51.1 DSR) |
| 38 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).D.S.R. Item No. 13.46.1 |
| 39 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointing with white cement including rubbing, polishing and cost of curring taxes and royalty all complete as per specification and direction and E/I.B.C.D. S.O.R. Item No. 5.6.23 |
| 40 | Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineerin-Charge.80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. (DS.R.16.91.2 ) |
| 41 | Providing 1.5mm cement punning including curing, carriage of water with all leads and lift as per building specification and direction of E/I. (5.7.11 BCD) |
| 42 | Labour of hoisting, placing and fixing in position R.S. Joist or tee including cutting to required shape and size straightening all complete job (but excluding the cost of joist or Tee) as per direction of E/I. (5.5.26 BCD ) |
| 43 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes (D.S.R 10.16.1 ) |
| 44 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (DSR 12.50) |
| 45 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface -do- -do- all complete job as per specification and direction of E/I. (5.8.45 BCD |
| 46 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l (5.7.1 BCD ) |
| 47 | Providing 12mm water proof cement plaster (1:3) with clean coarse sand of F.M 1.5 with 5% cico or any other approved water proofing compound including cost of screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I (5.7.14 ) |
| 48 | Providing 12 mm thick cement plaster (1:4) with clean coarse sand of F.M. 1.5 with 1.5 mm cement punning including screening, curing with all leads and lifts of water, scaffolding, taxes and royalty all complete as per specification and direcition of E/l (5.7.2 BCD ) |
| 49 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. (DSR 11.39 ) |
| 50 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR 8.31 ) |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Single tee with door - 110 x 110 x 110mm (12.42.3.2 DSR) |
| 52 | Supplying and fixing 100mm (4\\") steel jali (M-960 (v) ) |
| 53 | Supplying, fining and fixing viterous white glazed earthen ware I.W.C of Parry Hindustan or any other I.S.S approved make with 100mm H.C.I \\"p\\" trap 15 liters C.I. or C. pull and let go flushing cistern of names or other I.S.S equivalent make, complete with all fittings. C.I or C.C brackets 32mm alkathene/P.V.C telescopic flush, pipe about 2M long with one brass coupling and clamps G.I chain and pull including supplying and fixing a pair of viterous white glazed earthenware where footrest to be fixed in floor 15 mm C.I body brass spindle stope cock of weight not less than 50 grins. 15 mm P.V.C connection pipe 450mm long and the exposed pipe and cistern with two coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/I.580mm long with 10 litre low level P.V.C. cistern (DWSD 3.2.1 |
| 54 | Supplying, fining and fixing viterous white glazed earthen ware Indian squatting type 600x350mm urinal plate of Parry Hindustan or any other I.S.S approved make with internal flushing rim, 100mm white glazed earthen ware channel about 1 M long 5 liters capacity C.I. automatic flushing cistern of Reliance or any other approved make with fittings R.S. or C.I brackets 15mm and 45 cm long alkathene/P.V.C pipe, standard G.I. flush pipe for back and front with spreader fittings and brass coupling etc. 15 mm C.I body brass spindle stop cock of weight not less than 450 grams. all complete including painting of exposed parts with two coats of approved paint over a coat of red oxide primer and cutting the wall and floor and making good the same as per specification and direction of E/I.450mm x 350mm Size (Small) (DWSD 3.2.4 ) |
| 55 | Supplying, fitting and fitting vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other I.S.S. approved make supported on pointed C.I. or M.S. brackets 32m C.I. brass waste, 15mm dia C.I. body brass spindle stop cock of approved quality of weight not less than 350 grams, 32mm P.V.C. waste pipe 750mm long with brass coupling at one end and making plumber joints etc. all complete as per specification and direction of E/I. (DWSD 3.2.5 ) |
| 56 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge (DSR 18.8.2 ) 20 mm |
| 57 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge (DSR 18.9.4 ) 32mm |
| 58 | Providing and fixing male ended 15mm dia brass bib cock of approved quality (weight not less than 350 gms.) with extra socket all complete as per specification and direction of E/l. (DWSD 3.1.5.1) |
| 59 | Providing and fixing brass/C.I. stop cock of approved quality all complete as per specification and direction of E/l.15mm dia Brass Stop Cock (DWSD 3.1.6) |
| 60 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes (D.S.R 12.41.2 ) |
| 61 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Bend 87.5° - 110mm (DSR 12.42.5.2 ) |
| 62 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain) - 110mm (DSR 12.42.6.2 ) |
| 63 | Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250 mm apron including cost of EW involved, with 75mm cement concrete (1:4:8) over one brick designation 75A flat soling in proper grade and slope at the base, the drain duly plastered in C.M (1:3) with punning over exposed surface all complete as per specification and direction of E/I.(BCD 5.10.33 ) |
| 64 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR 18.48) |
| 65 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)B.C.D. S.O.R. Item No. 5.3.1.1 |
| 66 | Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts fasteners etc) (10.28 DSR) |
| 67 | Providing and fixing concentina coil fencening with punched tape concentina coil 600mm dia 10m openable length ( total length 90m) having 50 nos. rounds per six metre length upto 3m height of wall with existing angle iron Y shaped placed 2.4 m or 3m appart and with 9m horizontal R.B.T reinforced barbed wire stud tied with GI staples and clips to retain horizontal, including necessary bolts or GI barbed wire tied to angle iron, all complete as per direction of Eengineer in charge with reinforced barbed tape(R.B.T )/spring core(2.5mm thick) wire of high tensile strength of 165kg/sqmm with tape(0.52 mm thick) and weight 43.478gm/m(cost of MS angle, C.C blocks shall be paid saperatly) (DSR 16.53 ) |
| 68 | Supplying labour for fitting and fixing deep well cylinder jointing materials, chrome leather bucket all tools and plan etc. required for the job for low water level all complete job as per specification and direction of E/I.(M1052 : DW&S) |
| 69 | Providing and laying Doublecharge vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 / ISO 13006 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mmB.C.D. S.O.R. Item No. 5.6.28 |
| 70 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.Flexible pipe - 32mm diaD.S.R. Item No. 17.28.2.1 |
| 71 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.D.S.R. Item No. 18.8.1 15 mm nominal dia Pipes |
| 72 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc.D.S.R. Item No. 18.7.4 32mm nominal dia Pipes |
| 73 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red, Area of slab above 0.50 sqmD.S.R. Item No. 8.2.2.2 |
| 74 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45cm length (DSR 18.74.2 ) |
| 75 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour.15 mm nominal bore, weighing not less than 32 gms (18.75.1 DSR) |
| 76 | Providing 150mm wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 125mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I.S.O.R. Item No. 5.10.34 |
| 77 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board.D.S.R. Item No. 17.10.2.1 |
| 78 | Earth filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted with earth obtained from excavation of foundation trenches with a lead of 50m and lift of 1.5m all complete as per building specification and direction of E/l. B.C.D. S.O.R. Item No. 5.1.7 |
| 79 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Dark shade pigment using ordinary cement (DSR 11.20.3 ) |
| 80 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. DSR 18.12 .8 Vertical : 80 mm dia nominal bore |
| 81 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. DSR 18.12 .6 Vertical : 50 mm dia nominal bore |
| 82 | Suppling labour and equipment for digging well (vide classification of soil item-C) with chisel and hammer icluding disposal of excavated materials and stacking the sopils to safe distance at 50 meter all complete as per specification and direction of E/I (D.W.S.D 3.1.65 ) |
| 83 | DT: Basic rate for 115/125 mm dia drilled tube-well for drilling in all kinds of soil and rock for installation of hand pump with DI rings all complete including supplying all materials, labours, tools, drilling,rigs,air compressor and equipment as well as fuel lubricant for making 115/125 mm dia boring etc, and cost of transporting rig machine and other vehicle up to the site of work including contractor profit & O H charges as per specification and specification and direction of E/I. Drilling upto 30Mdepth below G.L.in Rural area M-1037 DWSD |
| 84 | DT: Basic rate for 115/125 mm dia drilled tube-well for drilling in all kinds of soil and rock for installation of hand pump with DI rings all complete including supplying all materials, labours, tools, drilling,rigs,air compressor and equipment as well as fuel lubricant for making 115/125 mm dia boring etc, and cost of transporting rig machine and other vehicle up to the site of work including contractor profit & O H charges as per specification and specification and direction of E/I. Drilling upto 50M depth beyond 30 m below G.L.in Rural area M-1037 DWSD |
| 85 | Suppling and laying boulder in rock toe, heel, trenches of the dem as per design and drawing inclulding the cost of material all complete as per building specification and direction of E/I (WRD 5.6.4 ) |
| 86 | Suppling and laying good quality of stone metal filter (20 mmto 63 mm size ) in the rock toe , heel trenches tee drain as per design and drawing inclding the cost of material all royalty all taxes etc but excluding the cost of of carriage all complete job as per building specification and direction of E/l. (WRD 5.6.3) |
| 87 | Suppling and laying sand filter blanketing in horizontal portion of the dam as per design and drawing with watering compaction inclulding the cost of material all royalty all taxes etc but excluding the cost of carriage all complete job as per building specifcation and direction of E/I. 5.6.1 WRD |
| 88 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size) (BCD 5.3.1.5) |
| 89 | Providing randam rubble stone masonry in CM (1:4) in superstructure including cost of screening of materials scaffolding raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. (5.2.34 BCD ) |
| 90 | Providing cement tuck pointing (1;3) on stone masonry with approved quality of sand of requisite (f.m.2.5 to3.0) washed and screened including curing , scaffolding wherever required and its removal royalty & all taxes etc . All complete job as per building specification and direction of E/l.(BCD 5.7.10) |
| 91 | supplying materials and labour for constrution inspection chamber of 75Bclass bricks size 750 mm deep 600x450 mm internal dia mention having 250 mm cement motar (1;6) including 12mm cement plaster (1;4) with punning on inside and cement plaster (1;6) with 600x475mm c.l cover with fame (weight not less than 36 kg ) along with p.c.c.(1;3;6) in foundation and refilling all complete as per approved design drawing building & PHED specification and direction of E/l (DWSD 3.3.8) |
| 92 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. (DSR 10.29.1) |
| 93 | Supply and Labour for fitting and fixing NP2 hume pipe with collors in line level and grade as well providing approved jointing materialand joints property filled to make tham water proof all complete job as per builning specification and direction of E/l. 7.6.1.2 WRD |
| 94 | Supply NP2 hume pipe with collors in line level and grade as well providing approved jointing materialand joints property filled to make tham water proof all complete job as per builning specification and direction of E/l. 250mm dia hume pipe - M-300 (iv) WRD PAGE NO 84 |
| 95 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia(DSR 23.3.1) |
| 96 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm DSR 12.43.2 |
| 97 | Supplying U.P.V.C. fittings Coupler-110mm DSR 12.42.1.2 |
| 98 | Supplying U.P.V.C. fittings Tee-110mm DSR 12.42.4.2 |
| 99 | Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq mm FR PVC copper conductor single core cable in surface …..do…etc as requied.. Group -B (1.1.2 ELEC) |
| 100 | Wiring for ckt /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable …..do…. As requied.2 x 6 sq mm + 1 x 6 sq mm earth wire )1.7.3 |
| 101 | Wiring for ckt /submain wiring along with earth wire with the following size of FR PVC insulated copper conductor single core cable …..do…. As requied.2x 2.5sq mm + 2.5 sq mm earth wire 1.7.2 |
| 102 | Supplying and fixing of following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required1 or 2 module (78x78x45).(1.27.1) |
| 103 | Supplying and fixing of following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required 6 module (78mm x 205mmx50mm) (1.27.3 ) |
| 104 | Supplying and fixing of following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required 8/9 module (78mm x 205mmx50mm) (1.27.4 ) |
| 105 | Supplying and fixing of following size /modules,G.I. box along with modular base & cover plate for modular switches in reccess etc required 12 module (135mm x 205mmx60mm) (1.27.5 ) |
| 106 | Supplying and fixing following modular switch/socket on the existing modulear plate & Switch box including connections but excluding modular plate etc as required. 5/6 amps one way switch 1.24.1 |
| 107 | Supplying and fixing following modular switch/socket on the existing modulear plate & Switch box including connections but excluding modular plate etc as required. 5/6 amp 3 pin socket outlet 1.24.4 |
| 108 | 5/6 amp 3 pin socket outlet 1.25 |
| 109 | Supplying and fixing brass batten/ angle holder including etc as required. 1.34 |
| 110 | supplying and fixing of following size of PVC conduict along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit are required. ( 25mm ). 1.21.2 |
| 111 | Supplying and fixing 3 pin , 5 amp ceiling rose on the existing junction box/ wooden block….do ..as required. 1.33 |
| 112 | Supplying and fixing following rating , double pole,240 voltss, isolate in the existing MCB DB complete ……..do….etc as required. 2.14.2 |
| 113 | Supplying and fixing following 240 voltss, 'C' Series miniature circuit breaker suitable for including load of following poles in MCB DB complete ……..do….etc as required. Sngle pole 2.12.2 |
| 114 | Supplying and fixing single pole blanking plate in the existing 2.13 |
| 115 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside…… do ….etc as required. 63 amp Double pole. 2.1.3 |
| 116 | Earthing with G.I. pipe 4.5 metre long 40 mm dia including accessories….do..….. Etc with charcoal/ coke and salt as required 3.2 |
| 117 | Supplying and laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc. as required. 3.7 |
| 118 | Supplying and fixing of ceiling fan - 48\\" dia(1200mm)BLDC 5star IS 374:2019 M-779 |
| 119 | Supplying and fixing of - 12\\" dia(300mm)EXHAUST FAN M-775 |
| 120 | Supplying and fixing of holder type LED 9/10 wat t M-855 |
| 121 | Cost of drilling 200mm x 165mm x 100m deep bore well in all kinds of soil and rock in rural area for installation of pump set with D.T.H. rig all complete! including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making boring and cost of transporting/charges of rig machine & other vehicles up to site of the work as per specification and direction of E/l.(M1035 : DW&S) 0.00 m to 50.0m |
| 122 | Cost of drilling 200mm x 165mm x 100m deep bore well in all kinds of soil and rock in rural area for installation of pump set with D.T.H. rig all complete! including supplying all materials, labours, tools, drilling rig, air compressor and equipment as well as fuel, lubricants for making boring and cost of transporting/charges of rig machine & other vehicles up to site of the work as per specification and direction of E/l.(M1035 : DW&S)from 51 m to 120 m |
| 123 | Supplying all materials, labours, equipments for lowering 200mm dia M.S. ERS pipes as casing of well thickness 6mm for protecting the sites from falling during the process of drilling ail complete including carriage to work site.(M1036 : DW&S |
| 124 | Supplying labour and equipments including 200mm dia. M.S. Cap and fitting and fixing over the tube well properly and taking it out as per direction of E/I.(M1036 : DW&S) |
| 125 | Supplying U.P.V.C. fittings Drainage -110mm (DSR 7189 PAGE NO 46 |
| 126 | Development of tube well in accordance with IS : 2800 (part I) and IS:11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, all as per requirement and direction of Engineer-in-charge.(M1042 : DW&S) |
| 127 | Supplying fitting and fixing of KSB/KIRLOSKER/CRI make 1.50 HP Submersible pump set having head of 135 metre including all taxes, royalty, etc.all complete job as per direction of E/I. (M1055 : DW&S) |
| 128 | Supplying fitting and fixing of 5 H.P. standard make starter panel board with arrangement of all necessary protection including all taxes,royalty etc all comlete job as per direction of E/I.(M1065 : DW&S) |
| 129 | Supplying fitting and fixing 3 core 4mm2 flat copper submersible cable FINOLEX/HAVELS make including all taxes,royalty etc all complete job as per direction of E/I.(M1906 : Energy) |
| 130 | Providing all labour for fitting and fixing of India Mark-II hand pump including supplying all tools and plats etc. as required for the job all complete job as per direction of E/I.(M1053 : DW&S) |
| 131 | Supplying all materials, labour & equipments for constructing P.C.C. (1:2:4) circular platform around each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning over exposed surface as per UNICEF design etc. all complete.(M1045 : DW&S) |
| 132 | Supplying all materials, labour & equipments for constructing P.C.C. (1:2:4) drain as per UNICEF design etc. all complete.(M1046 : DW&S) |
| 133 | Supplying extra Deep Well Hand Pump complete set with Cylinder Assembly & Connecting Rod (12 Pcs.) as per IS : 15500 Part-2/2004(M1047 : DW&S) |
| 134 | Cost of 32mm dia G.I. pipe 3 M long screwed at both ends with seamless Socket as per IS. 1239 (Part-II)/1990.(M1025 : DW&S) |
| 135 | CARRIAGE OF MATERIAL CEMENT |
| 136 | STONE CHIPS |
| 137 | STONE METALS |
| 138 | BOULDER |
| 139 | STEEL |
| 140 | BRICKS |
| 141 | Goods & Services Tax (G.S.T.) - 18% |
| 142 | Labour Cess - 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 07, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 15 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender