Tender For Provn Of Vehicle Parking Shed And 3 X Septic Tanks For Married Accn At Jalapahar Cantt Under Age (I) Darjeeling
Tender Value
9.63 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
15 days left
EMD
19260
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Darjeeling → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Vehicle Parking Shed And 3 X Septic Tanks For Married Accn At Jalapahar Cantt Under Age (I) Darjeeling
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as per specified and as directed by Engineer-in-charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as per specified and as directed by Engineer-in-charge. |
| 3 | Removing excavated material not exc. 50 m & depositing where directed at a level not exc. 1.5 m above starting point complete all as per specified and as directed by Engineer-in-charge. |
| 4 | Surface dressing not exc. 15 cm deep in soft/loose soil, complete all as per specified and as directed by Engineer-in-charge. |
| 5 | M&L for hardcore of guage not exc. 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface of broken stone or boulders, complete all as per specified and as directed by Engineer-in-charge. |
| 6 | M&L for PCC (1:4:8) type D2 ( using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as per specified and as directed by Engineer-in-charge. |
| 7 | M&L for PCC (1:2:4) type B-1 (using 20 mm grade crushed stone aggregate) as in coping roof kerbs or mud stops, rounded or chamfered on edges with necessary form work as required complete all as specified and as directed by Engineer-in-charge. |
| 8 | M&L for providing 75mm thick PCC 1:3:6 type C2 (40mm graded aggregate) as in plinth protection and paving finishing the surface even and smooth without using extra cement, complete all as specified and as directed by Engineer-in-charge. |
| 9 | M&L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:6, complete all as specified and as directed by Engineer-in-charge. |
| 10 | M&L for rendering 15 mm thick in CM 1:6 on fair faces of bricks work or concrete surface (internally) including finished, even and smooth without using extra cementcomplete all as specified and as directed by Engineer-in-charge. |
| 11 | M&L for rendering 15 mm thick in CM 1:4 on fair faces of bricks work or concrete surface (externally) mix with WPC @ 3% per weight of cement finished, even and smooth, complete all as specified and as directed by Engineer-in-charge.Note: WPC shall be measured and paid seperately. |
| 12 | Supply only water proofing compound (WPC) of approved make, complete all as specified and as directed by Engineer-in-charge. |
| 13 | M&L for prepartion of new plastered surfaces of wall applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and as directed by Engineer-in-charge. |
| 14 | M&L for preparing newly plastered surfaces of finishing walls with acrylic smooth exterior paint (weather coat) of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 Kg/10 sqm, complete all as specified and as directed by Engineer-in-charge. |
| 15 | M&L for roof trusses (Framed), trussed, purlin, crane gantries, rails and fastening and heavy bracket framing (Beam, Tee, Angle, Channel or Flat section) including distance pices, cleat etc. FE-290 (Gde E-165), complete all as specified and as directed by Engineer-in-charge. |
| 16 | M&L for applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome on newly steel surface including preparation of new previously untreated surfaces of any description, over 10cm width or grith, complete all as specified and as directed by Engineer-in-charge. |
| 17 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 mpa in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-charge. |
| 18 | S&F PVC (SWR) half round gutter drain pipe 180mm bore, complete all as specified and as directed by Engineer-in-charge. |
| 19 | S&F 180mm PVC (SWR) joint socket as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge. |
| 20 | S&F 180mm PVC (SWR) joint tee with end cap as in gutter drain pipe, complete all as specified and as directed by Engineer-in-charge. |
| 21 | S&F 180mm PVC (SWR) pipe clamp, complete all as specified and as directed by Engineer-in-charge. |
| 22 | M&L for machine pressed precast conctete interlocking paver block of any shape and any size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment, complete all as specified and as directed by Engineer-in-charge. |
| 23 | M&L 40 mm thick cement concrete type B1, 1:2:4 (using 20 mm graded stone aggregate) as in floors, finished even and smooth without using extra cement, complete all as per specified and as directed by Engineer-in-charge. |
| 24 | M&L for brick work with sub class 'B' bricks, straight or curved on plan exc. 6m mean radius in cement mortar 1:6, complete all as per specified and as directed by Engineer-in-charge. |
| 25 | M&L for concrete bed to 150mm dia SWG/RCC drain pipe including packing under & haunching against the sides of pipes with concrete after they are laid & tested in PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate), complete all as specified and as directed by Engineer-in-charge. |
| 26 | M&L for 150mm dia (internal) salt glazed stone ware drain pipes (Grade A) ISI Marked as in sewage lines laid in trenches and jointed, complete all as specified and as directed by Engineer-in-charge. |
| 27 | M&L for mild steel TMT bars 6 to 8 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge. |
| 28 | M&L for mild steel TMT bars 10 mm dia. and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips, complete all as per specified and as directed by Engineer-in-charge. |
| 29 | M&L for precast cement concrete (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 30 | M&L for RCC (nominal mix) type B-1, 1:2:4 (20 mm graded Agg) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as per specified and as directed by Engineer-in-charge. |
| 31 | S&F Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, fix on wall, 75 mm bore sand cast pipe, complete all as per specified and as directed by Engineer-in-charge. |
| 32 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as per specified and as directed by Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 17 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender