Tender For Execution Of Reinforcement Work Of Barpali-I Package (Bhatigaon-I, Sujia-Ii & Retamunda-Iii) River Lift Project Under Barpali Block In Baragada District.
Tender Value
19.49 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
5 days left
EMD
19496
Bank guarantee accepted
Document Fee
7080
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bargarh → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Execution Of Reinforcement Work Of Barpali-I Package (Bhatigaon-I, Sujia-Ii & Retamunda-Iii) River Lift Project Under Barpali Block In Baragada District.
BOQ
| Sl. No. | Item Description |
| 1 | Part-A |
| 2 | Earthwork in excavation of foundation in hard soil including dressing & levelling of bed within initial lead of 50mt. & lift of 1.5mtr etc complete as per the direction of the Engineer-incharge. |
| 3 | Earth work on excavation of foundation in hard soil within 50m initial lead & 1.5 m initial lift including dressing and leveling the bed & depositing the excavated materials within above lead & lift for cutting of field bonds. |
| 4 | Filling in foundation & plinth with sand including watering & ramming etc complete as per the direction of the Engineer-incharge. |
| 5 | Labour for sinking wells in all kinds of soil other than rock, to lines, levels and plumbs by scooping out from inside and bellow the staining including cost of necessary tools and plants, supplying and working of pumps bailing out of water or dredging, removal of all materials and obstacles from inside the well by divers, hire and labour for cantiledge jetting, if necessary and sinking to a depth of 10M taking precaution against shifting and tilting disposal of the spoil with all lead and lift etc. complete for 3mtr. dia outside circular single well upto 10mtr. depth as per the direction of the Engineer-incharge. |
| 6 | Cement concrete (1:4:8) with 4cm size h.g.b. crusher broken metal of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc. complete as per the direction of the Engineer-incharge. |
| 7 | Brick work with Fly Ash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75kg / cm2 with dimensional tolerrance + 8% in cement mortar (1:6) in foundation & plinth etc. complete as per the Engineer-incharge.a) In foundation and plinth |
| 8 | b) Brick work with Fly ash bricks of size (25cm x 12 cm x 8 cm ) having crushing strength not less than 75kg./cm2 with dimensional tolerance + 8% in cement mortar (1:6) in Superstructure with curing etc.complete as per direction of Engineer-in-charge. |
| 9 | RRHG Stone Masonary in C.M. (1:6) |
| 10 | Cement concrete (1:2:4) with 12mm size black h.g.b. crusher broken chips of approved quality from approved quarry with ramming watering and curring etc. complete including cost, taxes, royalty convence charge of all material to worksite, supply of cement T&P required etc complete as per the direction of the Engineer-incharge. |
| 11 | Rigid smooth centering & shuttering for R.C.C. works including false work & dismateling then after including cost of materials in ground floor complete an directed by the Engineer-incharge.a) Plinth Bend |
| 12 | b) Lintel |
| 13 | c) Chajah |
| 14 | d) Roof Slab |
| 15 | R.C.C. work in C.C. (1:2:4) including hoisting & laying & curring for 28days using 12mm. Size clean black hard granite crusher broken chips of approve quality and from approve quarry including cost taxes conveyance charges of all materials to the worksite with supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 16 | 2.5mm thick A.S. flooring with C.C. (1:2:4) using 12mm size black hard granite crusher broken chips of approve quality for approve quorry including water and curring with cost taxes royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 17 | 20mm cement plaster in cement mortar (1:6) finished smooth to stone work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 18 | 12mm cement plaster in cement mortar (1:6) finished smooth to brick work after racking out joints including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 19 | Providing & supplying of M.S.Rod for for M.S. Reinforcement for R.C.C work including cutting, bending, binding & tying the grills & placing in position including cost of binding wire etc.complete as per direction of Engineer-in-charge |
| 20 | Writing charges of required data on the wall of pump chamber/Transporency Pillar including supplying of approved paints and required material for writing etc. complete as per the direction of the Engineer-incharge. |
| 21 | Cement punning over plastering including waterring and curring with cost, taxes, royalty and conveyance charges of all material to the worksite and supply of all labour and T&P required for the work etc complete as directed by the Engineer-incharge. |
| 22 | White washing 3 coat with approve good stone lime including cost conveyance charges of materials including supply of labour, gum, indigo etc. required for the work complete as directed by the Engineer-incharge. |
| 23 | Supply fitting and fixing of Iron Door with Choukat |
| 24 | Supply fitting and fixing of Iron Window with Choukat |
| 25 | Painting 2 coats with approved shade of paint after a coat of primer including all cost |
| 26 | Distempering two coats to walls with distemper of approved shade on new work to give an even shade after 1 coat of white washing |
| 27 | 20mm thick cement plaster (1:4) for grading plaster |
| 28 | Supply, fitting and fixing of skylight |
| 29 | Supply of No.8 G.I. Wire of approved quality including cost, tax, conveyance etc. complete as per the direction of the Engineer-incharge. |
| 30 | Carriage of R.C.C. ring from casting site to work site including all labour charges and T&P required for the work etc. complete as per the direction of the Engineer-incharge. |
| 31 | Sinking of R.C.C. ring in to the intake well to lime levells and plumbs including all labour charges T&P required for the work etc. complete as per the direction of the Engineer-incharge. |
| 32 | Filling the gape portion between the intake well and outside of the ring with approved pabbles and coarse sand for smooth perculation of water into the intake well including supplying labour T&P required for the work etc. complete as per the direction of the Engineer-incharge. |
| 33 | Placing the cover slab over the intake well including carriage of cover slab from place of casting including supplying all labour T&P required for the work etc. complete as per the direction of the Engineer-incharge. |
| 34 | Fitting of un plasticised all dia PVC Pipe for all classes including jointing the pipe with solvent cement by non-head application method including fitting and fixing of required no. of PVC Tee for outlet and PVC Shaddle and PVC Riser nipple for fitting air valve, equal Tee etc. including cost of PVC Pipe, cost of Solvent Cement, Transportation of Pipe complete including conveyance pipe from village to worksite and testing of pipe line etc. complete as per the direction of the Engineer-incharge.a) 200 mm Ø PVC pipe (Cl-II) 4kgf/cm2 |
| 35 | b) 250 mm Ø PVC pipe (Cl-II) 4kgf/cm2 |
| 36 | c) 200 mm Ø PVC pipe (Cl-I) 2.5kgf/cm2 |
| 37 | Filling the foundation and plinth with excavated material as directed by the Engineer-incharge.a) Hard soil |
| 38 | 12.5 HP/9.375 KW Energy efficiency Monoblock pump set of total head 20 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete but excluding cost of GST |
| 39 | 15 HP/11.25 KW Energy efficiency Monoblock pump set of total head 24 mtrs having discharge 1700 LPM with squirrel cage induction motor fitted with bronze impeller TB-2 of IS 318/1981, companion flanges & Class \\"F\\"insulation suitable for operation 415 volt +6%-15% 3 phase, 50Hz AC poweer supply suction/deliveery= 100mmx100mm with BEE 3 Star rated energy efficiency Pump & as per IS-9079/2002 with overall efficiency 62 to 65% of reputed brand having wide dealership net work for easy availability of spares confirming to IS specification (a) Casing: FC 200 as per IS 210/1978 (b) Impeller: Bronze grade LTB-2 of IS 318/1981 including all cost, conveyance, cess etc complete but excluding cost of GST |
| 40 | Control Pannel with Automatic Star delta Starter, sheet steel enclosure suitable for operation of Squirrel cage induction motor up to 15 HP with 20 Amp (AC -3) duty contractor at 415 Volt+6%-15%, 3 phase, 50 Hz AC supply with over load relay range 8.9 to 13.5 Amp & no volt coil with electronic timer suitable for operation at voltage range of 300 to 440 V. The Starter should provide dependable protection against over load and single phasing fitted with Volt Meter, Ameter, MCB in complete shape including Indicator Lamp reputed brand of ISI specification including all cost, conveyance, cess etc complete but excluding cost of GST |
| 41 | Motor base plate made with M.S angle with one coat of red axide primer and two coats of powder coated paint suitable to cover centrifugal monoblock Pump Set from 10 HP to 15 HP and having provision for hole for fixing nut & bolt of approved brand including all cost, conveyance, cess etc complete as per the direction of the Engineer-In-Charge but excluding cost of GST |
| 42 | 3x16 sqmm PVC insulated (HD) tropoder armoured Electric Cable with alluminum conductor for use in 3 phase power system of working voltage upto & including 1100 volts at 50Hz confirming to IS 7098 (Pt-II) of approved brand of ISI marked including all cost, conveyance, cess etc complete but excluding cost of GST |
| 43 | Cost of 4.0mm2 PVC Single Core Copper Wire |
| 44 | Electrical Earthing |
| 45 | 100mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark. |
| 46 | 100mm dia G.I.Bend ( Medium Duty) conforming to IS No-1239 (part II/1992) with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 47 | 100mm dia C.I. Screw boss Foot Valve of swing type friction less with single disc conforming to IS-4038/1979 of reputed brand with ISI mark of reputed company having wide dealership network including all cost, conveyance, cess etc complete but excluding cost of GST |
| 48 | 100mm dia G.I.Flange (Medium Duty) conforming to IS No-6392/1971 with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 49 | 150mm dia nominal bore G.I.pipe having wall thickness 4.5mm electrical resistance welded of medium class confirming to IS- 1239(part-1/2004) with latest ammendments, screwed at both ends as per IS-554 with socketed at one end and the other end protected with plastic threaded protector including its transportation and unloading at L.I.P. site. The socket confirming to ISI 1239(part II/1992) with latest ammendments in random length of 4 to 7 mtr.Each pipe should bear IS certification and manufacturers name/trade mark |
| 50 | 219mm dia M.S.Pipe (6.30mm thickness) IS 3589:2001 with ISI mark of reputed company including all cost, conveyance, cess etc complete but excluding cost of GST |
| 51 | 100mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 52 | 200mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 53 | 250mm dia C.I.Double Flanged Non Return Valve swing type PN-1.0 (IS-5312(Part-I-2004) with bypass arrangement with ISI mark of reputed brand including all cost, conveyance, cess etc complete but excluding cost of GST |
| 54 | Cost, supplying of 50mm dia C.I double Air Release Valve with saddle and Raiser pipe conforming to IS 14845 (SI) with ISI mark |
| 55 | Cost of 200 mm Ø MS Flange |
| 56 | Cost of 200 mm x 200 mm x 200 mm Ø PVC Equal Tee |
| 57 | Cost of 250 mm x 250 mm x 250 mm Ø PVC Equal Tee |
| 58 | Cost of 200 mm Ø PVC End Cap |
| 59 | Cost of 250 mm Ø PVC End Cap |
| 60 | Cost of 200 mm Ø PVC Coupler (4 kg/cm2) |
| 61 | Cost of 250 mm Ø PVC Coupler (4 kg/cm2) |
| 62 | 100X100X25mm dia G.I.Tee with ISI mark of reputed brand having priming arrangement by locking system including all cost, conveyance, cess etc complete but excluding cost of GST |
| 63 | Cost of 200mm x 160mm Ø MS Reducer |
| 64 | Cost of 160mm x 110mm Ø MS Reducer |
| 65 | Cost of Welding Laying and Fitting of 219mm Ø MS Pipe |
| 66 | Cost, supplying of 200 mm x 200 mm x 110 mm Ø weldless G.I. Tee (3.6mm thickness) with bend, closing and opening arrangement of reputed brand including all cost, conveyance, cess etc. complete |
| 67 | Cost of Misc. Welding charges for \\"Z\\" joint, \\"S\\" bend, \\"Y\\" Joint etc. |
| 68 | Cost of Nut Bolt |
| 69 | Cost of Rubber Insertion |
| 70 | Cost of Outlet |
| 71 | Labour charges for delivery and fitting including fitting of priming Tee, sluice Valve, NR Valve, air release valve and riser Tee etc and installation |
| 72 | Cost for Electrical installation and energisation in complete shape |
| 73 | Supply of small T&P kit comprising of hand gloves-1 pair,tester-1 no, 8 inch cutting plier -1 no, 12 inch sly wrench-1 no, 12 inch Screw driver-1 no. , 24/27 & 21/23 De spanner-2 nos., 24/27 & 21/23 Ring spanner- 2 Nos. (Taparia) |
| 74 | Cost of digitiliation of pre / post photo, display board in ACP sheets with informatary information as per guide line including fixing all. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender