Tender For Repair & Renovation Of Tourism Development Office In Keonjhar District.
Tender Value
40.80 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
4 days left
EMD
40800
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kendujhar → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & Renovation Of Tourism Development Office In Keonjhar District.
BOQ
| Sl. No. | Item Description |
| 1 | Civil Works |
| 2 | Providing scraping old paints with scrapers, sand papering and washing with soap water or soda including scaffolding, materials labour etc complete as per direction of Engineer-in-charge. |
| 3 | Ground Floor |
| 4 | First Floor |
| 5 | Engagement of labour for reclamation of the garden area, including complete cleaning of the area, removal and uprooting of unwanted shrubs, stumps, roots, vegetation, grass, wood, twigs and other unwanted materials, breaking of clods, tilling of the area, collection and dumping of the removed materials at designated locations, and lifting, loading, transportation and unloading of such materials from the garden area to outside the premises by mechanical means, including all labour, machinery, tools and tackles, loading/unloading charges and incidental works, complete as per the instructions of the Officer-in-Charge. |
| 6 | Finishing wall surface with acrylic wall putty (water based) of approved make and finished smooth on even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes with labour etc. complete as per direction of Engineer-in-charge. |
| 7 | Ground Floor |
| 8 | First Floor |
| 9 | Providing and applying 2 coats of plastic emulsion paint of approved quality and shade over a coat of wall primer of approved quality to surfaces (interior) including throughly brushing the surface free for foreign materials, sand papering smooth the intermediate coats, providing necessary putty & primer including of all materials, labour, conveyance, taxes, royalties, csaffolding, charge, (colour & shade to be approved before procurment & use) |
| 10 | Ground Floor |
| 11 | First Floor |
| 12 | Wall painting two coats with Weather coat paint exterior grade of approved make & approved shade over a coat of primer to make an even finished surface of walls of approved make and finished smooth and even surface to receive painting of approved shade and quality after cleaning the plastred surface perfectly by watering and brushing including cost of material, putty, paint, brushes, all labour, taxes, loading, unloading, scaffolding, T & P etc as required for the work as per the direction of Engineer-in-charge. (colour & shade to be approved before procurment & use) |
| 13 | Ground Floor |
| 14 | First Floor |
| 15 | Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 16 | Ground Floor |
| 17 | First Floor |
| 18 | Pathway & Parking |
| 19 | Earth work in excavation in all kinds of soil (Ordinary, hard soil & stoney earth soil ) for foundation trenches within 50m. Initial lead and 1.5m initial lift including rough dressing and beaking clods to maximum 5 cm to 7 cm and laying in layers not exceeding 0.3 m in depth and as per specification approved by the department. |
| 20 | Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers including watering and ramming with cost, conveyance, royalties and taxes of sand with labour and T&P required for the work etc. complete (Measurement will be taken on finished compacted section only). |
| 21 | Providing & laying Plain Cement concrete (PCC ) of proportion (1:3:6) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 22 | Providing & laying Plain Cement concrete of proportion (1:2:4) in foundation and floors using 4cm (1½”) size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6”) thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties and taxes of all materials with all labour, cess and T&P required for the work etc. complete in all respect. |
| 23 | Providing Brick work with Fly ash bricks 25cm x 12cm x 8cm size having crushing strength not less than 75 kg/cm2 with dimensional tolerance +/ - 2 percent in cement mortar ( 1 cement: 6 sand), for foundation & plinth with all necessary projection, splay cutting, circular moulding, corbelling, etc., including cost of all materials, labour, conveyance, loading ,and unloadining, taxes, royalties, scaffolding, watering, curing, sundries, tools and plants, etc., as per the direction of the Engineer-in-charge. |
| 24 | Providing 12mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 25 | Providing 16mm thick cement plaster in all floors at all height with cement mortar of mix (1:6) with Portland slag cement (PSC) and with screened and washed sharp sand for mortar and finished smooth to the rough surface of brick masonry walls after racking out joints including watering and curing rounding of corners etc. complete with cost, conveyance, loading, unloading, royalties and , cost of all labour, T&P, sundries and scaffolding required for the work etc. with providing grooves as directed by the Engineer-in-Charge. |
| 26 | Supplying and laying of hydraulically pressed and mechanically compacted free cast interlocking UNI PAVER pavers of 80MM thick of different colour , coral shaped preparation of sub base with 50mm sand and leveling,laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete as per direction of Engineer-in-chrge. |
| 27 | Furniture |
| 28 | Supplying and placing in position Main Table & ERU of the following specifications. Its size shall be 1500 Width mm x 750 Depth mm x 740 Height mm .Table top shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick backing laminate (bdl) .Flat edge Duly sealed with 2 mm thick PVC beading.The modesty shall be 18 mm thick plain particle board ( ) PPB Clad with 1.0 mm thick decorative laminate (DL) on both sides. Edge Sealed with 2 mm thick PVC beading. ERU size shall be 1050 Width x 450 Depth x 705 Height. The top of Finesse ERU -3616 LHS shall be 25 mm thick plain particle board (PPB) Clad with 0.6 mm thick post formed laminate and 1 mm thick Backing Laminate ( BDL).Flat Edge duly sealed with 2 mm thick PVC beading. The Modesty shall be 18 mm thick plain particle board (PPB) Clad with 1.0 mm thick Decorative Laminate (DL) on both sides. Edge sealed with 2 mm thick PVC Beading.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 29 | Supplying and placing in position Conference table of the following specifications with overall size shall be 3000 X 1150 X 740.Work top--Made of 25mm thick MDFone side prelaminate board conforming to IS14587:1998 with 0.4mm PVC membrane pressed on to top and having chamfered edge. Access panels provided with soft closing hinges Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction.Wire Raiser-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. Cutout provision below Access flap at two locations for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables (eg.HDMI, VGA-A,etc).This product should be certified by GREENGUARD, Indoor Advantage GOLD, GRIHA & SVAGRIHA & GREEN PRO.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 30 | Office Table1200 x 600 x 750Supplying and placing in position office Table of the following specifications. Its size shall be 1200 x 600 x 750.TABLE MATERIAL - The Table Panels are made from 18 ±0.5mm thk Pre- LaminatedExterior grade PLT ( Grade I,Type-II )(IS 12823) with PVC edgebanding on all sides.Drawer bottom panels are made up of 9mm thick (±1mm)Pre- laminated Particle Board.Locking has been provided on top drawer only.CONSTRUCTION - Table has provision of CPU monitor, Drawer and Sliding KBPT.The Table has a knock-down construction.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 31 | Providing, supplying and placing for Conference Full Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA methoddescribed in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H)*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression.· Armrest top is mounted on Armrest structure made of glass filled Nylon.· Armrest Top is PU moulded over glass filled Nylon insert.ARMRESTS (THRILL Executive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustmentPNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment strok of 9.5 ± 0.3 cmPEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.WIDTH (W): 77.0 CM. WIDTH (W): 76.1 CM.DEPTH (D): 76.1 CM.HEIGHT (H): 101.5-111.5 CM.SEAT HEIGHT (SH): 46.0-56.0 CM.( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 32 | Providing, supplying and placing of Mid Back Chair. SEAT ASSEMBLY: The seat is made up of 1.5±0.1 cm thick hot-pressed plywood upholstered with fabric and moulded polyurethane foam.SEAT SIZE: 51.8cm (W) x 49.7cm (D) BACK ASSEMBLY: The Back is injection moulded in glass filled Polypropylene which is 2 upholstered with Mesh fabric. The back consist of adjustable Lumbar support made of injection moulded Polypropylene having an adjustment of 5.0 10.1 cm.BACK SIZE: 47.9 cm(W) x 66.9 cm (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam is moulded with density 45+/-2 kg/m and hardness 14 ± 2 kgf as per IS:7888 for 25% compression.ARMRESTS (ADJUSTABLE):The height adjustable armrest is made of Polypropylene and can be adjusted to 6.010.1cm height it also has swivel and To and Fro adjustment with moulded PU armtopACTIVE BIO-SYNCHRO MECHANISM: The adjustable tilting mechanism is designed with the following features360° revolving type Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfortTill tension adjustment can be operated in seating position5 position Tilt limiter giving option of variable sit angle to the chairSeat/back tilting ratio of 1:2 The mechanism housing is made up of HPDC Aluminium & black powder coated (DFT 40 to 60 micron)PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with an adjustment stroke of 10.0±0.3cm.PEDESTAL ASSEMBLY: The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal pitch-center dia is 166.1±0.5 cm.(76.1 ± 1.0 cm. with castors).TWIN WHEEL CASTORS: The twin wheel castors are Injection moulded in black Polyamide having 6.01 0.1cm wheel Diameter.WIDTH (W) - 76.0cmDEPTH (D) - 76.0cmHEIGHT (H) - 95.5 cm- 105.5cmSEAT HEIGHT - 43.5 - 54.0cm( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 33 | Providing, supplying and placing for Conference High Chair. SEAT/BACK ASSEMBLY: The back is made up of 1.2 ±0.1cm. thick hot-pressed plywood & seat is made up of 1.5 ±0.1cm. thick hot-pressed plywood measured as per QA methoddescribed in OCP-QLTA-P14-18 and upholstered with fabric upholstery covers and moulded Polyurethane foam. The back foam is designed with contoured foam lumbar support. The seat has extra thick foam on front edge to give comfort to popliteal area.*HIGH BACK SIZE 51.5 cm. (W) x 82.0 cm. (H)*FULL BACK SIZE 51.5 cm. (W) x 69.0 cm. (H)*SEAT SIZE 53.5 cm. (W) x 51.0 cm. (D)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 14 ± 2 kgf as per IS:7888 for 25% compression.· Armrest top is mounted on Armrest structure made of glass filled Nylon.· Armrest Top is PU moulded over glass filled Nylon insert.ARMRESTS (THRILL Exaecutive CHAIR) : The 3-way adjustable armrest is is made of die-cast aluminium with buffing finish designed with the following features :· Up-Down adjustment–7 steps (7.0 ± 0.5cm range)· It has to & fro movement along with Swivel adjustment.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:· 360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustmentPNEUMATIC HEIGHT ADJUSTMENT : The pneumatic height adjustment has an adjustment strok of 9.5 ± 0.3 cmPEDESTAL ASSEMBLY (THRILL EXECUTIVE) : The pedestal is made of die-cast aluminium with buffing finish. It is fitted with 5nos. twin wheel castor. The pedestal is 67.0 ± 0.5cm pitch-center dia. (77.0 ± 1.0cm with castors).TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon.WIDTH (W): 77.0 CM. WIDTH (W): 76.1 CM.DEPTH (D): 76.1 CM.HEIGHT (H): 113.5-123.5 CM.SEAT HEIGHT (SH): 46.0-56.0 CM.( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 34 | Providing, supplying and placing of Visitor Chair. SEAT ASSEMBLY: The seat assembly should be made up of 1.2 ±0.1cm. thick hot-pressed plywood , upholstered with fabric upholstery covers and moulded Polyurethane foam.SEAT SIZE: 47.0 cm. (W) x 48.0 cm. (D)BACK ASSEMBLY: The back asembly. should be made of powder coated (OFT 40-60 microns) tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. MS ERW tube designed with contoured lumbar support for extra comfort. The back should be upholstered using double layer spacer mesh fabric with high tenacity yarn.BACK SIZE : 46.5 cm. (W) x 60.5cm. (H)HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam should be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.ARMRESTS: The one-piece armrests should be injection moulded from black Co-polymer Polypropylene. .TUBULAR FRAME: The powder coated (DFT 40-60.microns) tubular frame should be cantilever type & made of Ø2.54 ±0.03cm. x 0.2 ±0.016cm thick M.S.E.R.W. Tube. Overall Dimensions of ChairSeat Height - 46.5cm.Height - 93.5cm.Width & Depth of Chair as measured from pedestal - Width-61.0 cm and Depth-64.5 cm. ( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 35 | PARTO Single Seater Sofa Leather Overall Size : Width : 92cm Depth : 87cm Height : 76cm Seating Height : 39.5cmSTITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 ( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 36 | PARTO Three Seater Sofa Leather Overall Size : Width : 134cm Depth : 87cm Height : 76cm Seating Height : 39.5cmSTITCHING: THREAD : Poly Proplin. LEATHER/PVC/FABRIC: PVC. Thickness (mm) : 0.9 Weight (GSM) : 575 ( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 37 | Supplying Coffee Table 25mmX50mm CRC pipe (Powder Coated) 600mm/1200mm Height 450mm. 12mm toughened glass top colour- As per approval |
| 38 | Providing Godrej make Storwel plain shall have an overall size of 916mm(W)x486mm(D)x1981mm(H) with welded construction. It should have the shelf thickness of 0.7 mm, Back thickness of 0.8mm, Door thickness of 0.8mm (high yield strength) and all other components shall have a thickness of 0.9mm. These components shall be made of CRCA ‘D’ grade high yield strength as per IS:513. The Storwel Plain should have a Mazak handle and Three way locking mechanism with Shooting Bolts. It should have a height wise adjustable shelf mounting which shall have a Uniformly Distributed Load Capacity of max 40 Kg. It should also have a M10 Screw type Leveller with Hex plastic base. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). Plenty of colour options and shelving options shall be available. |
| 39 | Providing, supplying and placing of Waiting chair.SEAT/BACK SHELL: It is powder-coated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness with circular perforations.The Side Bar is made of cold rolled M.S.sheet 0.12 ± 0.013 cm thickness. The Shell is assembled on the Cross Beam with help of M8 Bolts.SEAT SIZE : 50.0 cm (W) x 45.5 cm (D)BACK SIZE : 50.0 cm (W) x 56.0 cm (H)CROSS BEAM: It is made up of cold rolled steel with 0.2 ± 0.02 cm thickness. The crossbeam is powder coated. It is covered with plastic end capsLEG: It is made up of cold rolled steel with 0.12 ± 0.013 cm thickness. It is powder coated. The legs are fitted with leveller cups covered with SS304 sheet.ARMREST: It is made of SS304 round tube of Ø 3.175 ± 0.03cm x 0.12 ± 0.013 cm thick formed to make an oblong shape.WIDTH (W): 173.5 CM. DEPTH (D): 74.0 CM.HEIGHT (H): 91.0 CMSEAT HEIGHT (SH): 44.0 CM.( Make - Godrej/Durian/Neeman/ Neelkamal/ Geeken etc) |
| 40 | Providing Boucher Stand OR Literature Display.PLPB board to be provided as per approved design Required sizes: H-900mmX W-600 mmX500 mm.( Make - Godrej/ Durian/ Wakefit/ Geeken etc) |
| 41 | Electrical Gadgets |
| 42 | Supply,installation, testing and commissioning of Air Cooled HI Wall split type Air conditioners complete with Indoor unit (IDU), Out door unit (ODU), i/c R-32/R-410/ R-407 Green Refrigerant, wireless Remote control, suitable for working between 180-260V with low & high voltage cut off and50 hz ,1 phase AC Supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll /rotary compressor. The system shall be able to deliver 100% of the rated capacity upto 42 Degree Celsius. Min 5 year Original Equipment Manufacturer (OEM) warranty both compressor and Printed Circuit Board (PCB). Must comply : Electrical cable IS694 or IS 9968 temperature sensing control IS/ International Electro technical Commission (IEC) 60730, hermetic compressor IS 10617, heat exchanger IS 11329, capacitor IS 2993 and motor IS 12615. Complete as per IS :1391 Part II 2023. The system shall be able to operate up to 50 Degree C (out door ambient temperature). The indoor outdoor must be Blue Fin coated. The unit price included with 3mtr Copper piping with insulation, drain Pipe and copper Power cable. The indoor should have 4 way swing . |
| 43 | 1.5 TR with 5 Star BEE Rating (LG-AS-Q20JWZE/ O General-ASGG18CGWA-B/ Daikin-FTKU50XV16) |
| 44 | 2.0 TR with 5 Star BEE Rating (O General-ASGG24CGWA-B/ Daikin-FTKM60XV16) |
| 45 | REFRIGRANT PIPING |
| 46 | Supply,installation of hard/soft ISI marked copper refrigerant piping of size 5/8 inch and 1/4 inch for suction and liquid line with 3 corex4 sqmm FRLS Copper control cable alongwith 25 mm weather proof closed cell nitrile insulation ,complete with fitting of bends and other nesessary material to complete the job. |
| 47 | 1 TR to 3 TR high wall split A.C |
| 48 | Supply & Installation of interconnecting following sizes of refrigerant copper pipe work of following outer diameter, insulated with 25mm thick closed cell electrometric Nitrile rubber tubular insulation between each set of indoor & outdoor units . The pipe dia upto 25 shall be soft seamless & above 25mm dia shall be hard seamless . All piping inside the room shall be properly fixed/supported with suitable size of clamp/ M.S. hanger and all external piping shall run in GI. cable tray etc. as reqd. Make of insulation-K Flex/Armacell/Vidoflex/Eurobatex/Isoline Make of pipe-Rajco/Mandev/Maxflow (for 4 TR CASSETTE ac) |
| 49 | 9.5 mm with 0.8 mm thick |
| 50 | 15.9 mm with 1.00 mm thick |
| 51 | FRAME WORK |
| 52 | Supply,installation & fabrication of MS base frame for outdoor unit and other nesessary material to complete the job. |
| 53 | 1 TR to 3 TR high wall split A.C |
| 54 | DRAIN PIPING |
| 55 | Supply,installation & fabrication of Insulated drain water piping from indoor to nearestdrain point separate to all and other nesessary material to complete the job. |
| 56 | 25mm nom. Dia pipe |
| 57 | Supply and fixing of 4kVA Voltage stabilizer (Make-V-Guard/Microtek |
| 58 | Supply and fixing of 5kVA Voltage stabilizer (Make-V-Guard/Microtek |
| 59 | Supplying, Installation, Testing & Commissioning of 2 Ton Tower AC machine,, 2star, inverter of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge.(Godrej-AC 2.0T TR TIC 24M2TG GA 4/ LG/Voltas/Bluestar/ Carrier /Daikin) |
| 60 | Suppy, installation, testing & commissioning of Smart LED TV having screen size- 55 inch, resolution 4K Ultra HD (3840 x 2160), Smart TV Features: Google TV | Watchlist | Google Assistant |Google Cast | Game Menu | ALLM/eARC (HDMI 2.1 Compatible) | Additional Features: Apple Airplay 2 | Apple Homekit | Alexa with Standard Accessories of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. Make - LG, SAMSUNG, SONY. |
| 61 | Suppy, installation, testing & commissioning of geyser 15 ltr should be BEE 5 Star Rating for superior energy efficiency. with CFC-free PUF insulation for maximising heat retention with all materials & labour as required as per the direction of Engineer-in-Charge. Make- Vguard, Havells, Bajaj/equivalent |
| 62 | Supply and Installation of All In One Desktop-14th Gen, Intel Core i-5 Processor, Windows-11, Ms Office, 16GB Ram, 512 SSD, 23.8'' Display (3 Year Onsite Warranty) etc complete with all materials & labour as required as per the direction of Engineer-in Charge. HP (440G9) /equivalent |
| 63 | Supply and Installation of Luminous 600VA UPS etc complete with all materials & labour as required as per the direction of Engineer-in Charge. |
| 64 | Supply and Installation of colour Printer with print, scan, copy facility. Print speed(A4,ISO) upto 18/13 images per minute(mono/colour).in built wifi, airprint, mopia, direct wireless etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-CANON MAXIFY GX3072/Equivalent |
| 65 | Supply and Installation of water purifier with RO+UV+UF COPPER etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-AQUAGUARD ENRICH GLORY/Equivalent |
| 66 | Supply and Installation of invertere having VA Rating 2000VA/24VPure Sine Wave Inverter,Support two battery,Running Appliances - LED bulb, Ceiling Fan,Television,Set Top Box & Room Cooler,Compatible with Tubular battery(80Ah - 250Ah)etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-LUMINOUS EVO S 2300/Equivalent |
| 67 | Supply and Installation of inverter tabular battery 200AH with 60 month warranty etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-LUMINOUS ILTT 25060/Equivalent |
| 68 | Supply and Installation of trolley for inverter and battery etc complete with all materials & labour as required as per the direction of Engineer-in Charge. Make-LUMINOUS TX100L/Equivalent |
| 69 | Supply of 4 MP IP Indoor AUDIO Dome Camera Specification : Image Sensor: 1/2.7 CMOS Image SensorEffective Pixels : 2688 (H) × 1520 (V) resolution at 25/30 fps.Smart Illumination & Starlight Sensor: Sharp and balanced footage even in ultra-low light.Angle Adjustment : Pan: 0°–360°, Tilt: 0°–78°, Rotation: 0°–360° Image Rotation : 0°/90°/180°/270° Video Compression : InstaStream, H.265, H.264 variants, MJPEGStream Capability : Support Triple StreamBuilt-in Audio — Integrated microphone for audio-enabled surveillance.Audio Compression: G.711a, G.711Mu, PCM, G.726, AACRAM :128 MBIR : Smart IR Secure Connectivity : PoE support and multi-layered cybersecurity.Certification : ISO 9001: 2015, ISO 20000-1 : 2018, ISO 14001 : 2015, ISO 45001 : 2018, ISO 50001:2018, CE, FCC, RoHS and BIS, STQC approvedMake- CP PLUS, PRAMA, HONEYWELL/EQUIVALENT |
| 70 | Supply of 4 MP IP AUDIO Outdoor Bullet Specification : Image Sensor: 1/2.9 CMOS Image SensorEffective Pixels : 2688 (H) × 1520 (V)Angle Adjustment : Pan: 0°–360°, Tilt: 0°–90°, Rotation: 0°–360°Image Rotation : 0°/90°/180°/270° Video Compression : Supports Instastream, H.265, H.264+, H.264, H.264H, H.264B, and MJPEG (sub-stream only)Back Light Compensation : WDR (120 dB), Day/Night (ICR), 3D‑NR, ROI, AWB, AGC, HLC, BLC, digital watermarkingStream Capability : Support Triple StreamDORI Distance: 85.4 m (Detect), 34.2 m (Observe), 17.1 m (Recognize), 8.5 m (Identify)Audio : Support Built-in MicAudio Compression: G.711a, G.711Mu, PCM, G.726, AACRAM : 128 MBROM : 128 MBIR : Smart IR Robust cybersecurity: AES‑256 encryption, configuration encryption, trusted boot/execution, HTTPS, IP/MAC filtering, account lockout, WSSE, syslogCertification : ISO 9001: 2015, ISO 20000-1 : 2018, ISO 14001 : 2015, ISO 45001 : 2018, ISO 50001:2018, CE, FCC, RoHS and BIS, STQC approvedCP PLUS, PRAMA, HONEYWELL/EQUIVALENT. |
| 71 | Supply of 8 Channel NVR Specification : Processor : Industrial-grade embedded micro-processorVideo Resolution : HDMI: 3840×2160, 1920×1080, 1280×1024, 1280×720 VGA: 1920×1080, 1280×1024, 1280×720Video Recording: Max 80 Mbps, 8MP/6MP/5MP/4MP/3MP/1080P/ 720P/ D1&etc.Decoding Capability: AI disabled: 1-channel 12MP@30 fps; 1-channel 8MP@30 fps; 2-channel 5MP@30 fps; 3- channel 4MP@30 fps; 6- channel 1080p@30 fps AI enabled: 1-channel 8MP@30 fps; 1-channel 5MP@30 fps; 2-channel 4MP@30 fps; 4- channel 1080p@30 fps Hard Disk: 2 SATA III ports, up to 10TB Each.Record Interval : 1~120 min (default: 60 min), Pre-record: 1~30 sec, Post-record: 10~300 sec Backup Mode : USB Device / Network Protocols: HTTP/HTTPS, TCP/IP, IPv4/IPv6, RTSP, UDP, NTP, DHCP, DNS, IP Filter, DDNS, RTSP, IP Search, P2P, ONVIF 2.4, SDK, CGIMake-CP PLUS, PRAMA, HONEYWELL/EQUIVALENT |
| 72 | Supply of 2TB Surveillance Hard Disk Specification : Interface : SATA 6Gb/sCache : 64MBBytes per Sector : 4096Operating (ambient, min) : 0°COperating (drive case, max) : 70°CMax Sustainable Transfer Rate : 180MB/sVoltage Tolerance, Inc. Noise (5V) : ±5%Load/Unload Cycles : 300,000Nonrecoverable Read Errors per Bits Read, Max : 1 per 10E14 Seagate / WD |
| 73 | Supply of 8 Port GIGABIT PoE SwitchSpecification : Network Standard: IEEE 802.3i 10BASE-T/IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3x Flow Control, IEEE 802.3af/at/bt Power over Ethernet Bandwidth: 20 GbpsTransmission Rate : 2000Mbps Full Duplex; 10 or 100 or 1000 Mbps Half DuplexNetwork Latency : (10 to 1000Mbps): ≥16μs (use the 64byte package size). Make. CP PLUS, D LINK, HI-FOCUS/EQUIVALENT |
| 74 | Supply of Cat-6 Cable (With PVC Pipe & Casing)Specification : Conductor: Solid Bare lectrolytic Grade CopperNominal Conductor Diameter : 23 AWGInsulation : Polyethylene (LDPE)Outer Sheath : PVC Sheath/ LSZHConductor Resistance of solid cable : 93.5Ω/1000 Mtr@20°C Max. Make- D Link/Equivalent |
| 75 | Supply of RJ45 Connector.D Link/Equivalent |
| 76 | Supply of Cat-6 Patch Cord. D LINK/Equivalent |
| 77 | Supply of IP Camera PVC Box. |
| 78 | 4U NVR RackDescription: Front Glass Door (tinted, Toughened) with Lock & Key 2 pairs of 19\\" Mounting Rails with Welded Side WallsAccessories : 1U Cable Manager (1), Hardware Packet (1 Pkt) 3Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit / 90 CFM /230V AC (1 No). Make-CP PLUS, PRAMA, HONEYWELL/EQUIVALENT |
| 79 | Installation & Service Charge (Lying of Cable, Installation and configuration of CCTV Camera, DVR) |
| 80 | Supplying, storing, laying, testing and commissioning of 3.5c x 35 Sq. mm armoured Aluminium Cable direct in ground including excavation, sand cushining protective covering and refilling the trench of approved make complete with all materials & labour as required as per the direction of Engineer-in-Charge. |
| 81 | Supply and Installation of Multi functioning Printer- Make-HP Laser Jet Pro Mfp 410 DW/ equivalent Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender