Tender For providing Of Installation Of 40 X Water Heater, Alluminium Partion And Other Amenities In Single Living Accn And Partion Of Single Man Barrack At Otm Accn, Sewage Line At Offrs Mess, 02 X Urinal Block, Ladies Toilet Near Bldg No T-5, Overh
Tender Value
49.55 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
16 days left
EMD
99108
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kamrup Metro → Assam
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for providing Of Installation Of 40 X Water Heater, Alluminium Partion And Other Amenities In Single Living Accn And Partion Of Single Man Barrack At Otm Accn, Sewage Line At Offrs Mess, 02 X Urinal Block, Ladies Toilet Near Bldg No T-5, Overhead Shelter At Open Bathing Place (Cherry) And Chain Link Fence Alongwith Bdy Wall Under Ge Narangi
BOQ
| Sl. No. | Item Description |
| 1 | Surface Excn not exc (not Exceeding) 30 cm deep and averging 15 cm deep and getting out in soft / Loose soil etc complete all as specified and as directed. |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Soft / Loose etc complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and as directed. |
| 4 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out in soft / loose soil etc complete al as specified and as directed. |
| 5 | Spreading and levelling in layers n exc. 25 cm thick incl well ramming including watering as required etc complete all as specified and as directed. [Notes : Earth reqd for filling under floor obtained from Item no 1] |
| 6 | Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point etc complete all as specified and as directed. |
| 7 | M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed. |
| 8 | M&L for plain cement concrete (1:4:8) type D-2, with using 40 mm graded stone aggregates as in foundations and mass concrete etc complete all as specified and as directed. |
| 9 | M&L for cement concrete (1:3:6) type C-1 (using 20mm graded aggregate) as in hold fast of chowkat etc complete all as specified and as directed. |
| 10 | M&L for providing plain cement concrete (1:2:4) type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed. |
| 11 | M&L for plain cement concrete (1:2:4) type C-1, with using 20 mm grades stone aggregates as in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and base) etcc complete all as specified and as directed. |
| 12 | M&L for cement concrete (1:2:4) type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary form work, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 13 | M&L for Pre-cast cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes / drain cover etc) and similar work including necessary form work and set in CM 1:6 etc complete all as specified and directed. |
| 14 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. |
| 15 | M&L Reinforced cement concrete (nominal mix) type B-1 with using 20 mm graded stone aggregates as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 16 | M&L Reinforced cement concrete (nominal mix) type B-1 with using 20 mm graded stone aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed. |
| 17 | Supply only Liquid water proofing compound. |
| 18 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) etc complete all as specified and as directed. |
| 19 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) etc complete all as specified and as directed. |
| 20 | M&L Brickwork (Old size Brick) with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) etc complete all as specified and as directed. |
| 21 | M&L for Damp proof course 40 mm thick in cement concrete (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork and applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m etc complete all as specified and as directed. |
| 22 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding the edges half round incl polishing etc complete all as specified and as directed. |
| 23 | M&L for Sand filling under floors or in foundations including watering and consolidation all as specified and directed. |
| 24 | M&L for Rubber Moulded glossy finished pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed. |
| 25 | Reinforced cement concrete M-20 (20mm graded aggragates) (design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified. |
| 26 | M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to etc complete all as specified and as directed. |
| 27 | M&L for formwork to sides and soffits of floor or roof beam, beam and haunching, girders, bressummers, lintels cantilevers, shelves including supports, overhangs etc also splays between floor and beam with rough finished etc complete all as specified and as directed. |
| 28 | M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter, flat with fair finished surface of wall etc complete all as specified and as directed. |
| 29 | S&F Steel windows with side hung shuters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded completed all as specified and as directed. |
| 30 | S&F for solid PVC frame (Single Rebated) of size 50X47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integrar skin with suitable metal stiftner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed.(Note: Door frame shall be water proof, Termite proof, elegant and should have excellent screws holding strength to fix hinges and holds the doors property for a long life) |
| 31 | S&F factory made solid PVC moulded door shutter with wood tree EPS, 28 to 30mm thick (tiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc complete all as specified and as directed. |
| 32 | S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed. |
| 33 | S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed. |
| 34 | S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 35 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed. |
| 36 | M&L for framed work as in grills, grating etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters walks ways, railing framed work of water tanks and similar work etc complete all as specified and as directed. |
| 37 | M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-W (Gde E- 250) quality A etc complete all as specified and as directed. |
| 38 | S&F Steel work as in tubular trusses as in col, rafters, purlins etc. complete using ERW or induction butt welded tubes etc complete all as specified and as directed. |
| 39 | M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 40 | All as per item No 39 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed. |
| 41 | M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed. |
| 42 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 43 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed. |
| 44 | S&F 7 to 8 mm hollow profile thickness thick PVC Coloured Sheet (any Shape, coloured, pattern as approved ) suitably placed in false ceiling/Walls incl making sunken side corner, design as directed etc incl grid work made of G.I./M.S. as per Mfd Instruction etc complete all as specified and as directed. (Make - Rajashree/ Magama /Syntax or any other equivalent make as approved by GE) |
| 45 | M&L for 75 mm thick PCC (1:3:6), type C-1, using 20 mm graded aggregates as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 46 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed. |
| 47 | M&L for cement concrete type B-0 (1:2:4) (12.5mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed. |
| 48 | M&L for Rendering 10 mm thick in CM (1:3) for backing coat of tiles / dado etc complete all as specified and as directed. |
| 49 | M&L for Screed bed or bedding layer of mortar 15 mm thick in CM (1:6) for laying floor finishes etc complete all as specified and as directed. |
| 50 | M&L Glazed ceramic tiles (Coloured) as in vertical surface 600X1200mmX7 to 9 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and as directed. |
| 51 | M & L for Non - skid joint free matt finished ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed. |
| 52 | All as per item No 51 above but as in vertical surface etc complete all as specified and as directed. |
| 53 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premise etc complete all as specified and as directed. |
| 54 | Taking down cement plaster of any description hacking for key or raking out joint on old brick work/ stone /concrete surface etc complete all as specified and as directed. |
| 55 | M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished and smooth without using extra cement etc complete all as specified and as directed. |
| 56 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 57 | M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete surface mixed with water proofing compound where ever is reqd as per manufacture instruction finished even and smooth without using extra cement etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately |
| 58 | M&L for rendering 15 mm thick in CM (1:6) on other than fair faces of brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 59 | M&L for Preparing new plastered suface of walls and applying two coats distemper over and including clearcolle on plastered surfaces, preparatory to distempering complete all as specified and as directed. |
| 60 | M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed. |
| 61 | M&L for Preparing new plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 62 | M&L for preparation Newly plastered surface of wall and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance (Apex Ultima), dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. etc complete all as specified and as directed. |
| 63 | S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in not. exc 0.5 sq.m in each pane etc omplete all as specified and as directed. |
| 64 | S&F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed. |
| 65 | S&F 8mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required incl fixing arrangements, etc complete all as specified and as directed. |
| 66 | Complete removal exising treatment (External/Internal wall) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed. |
| 67 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed. |
| 68 | M&L for Preparing Old plastered suface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed. |
| 69 | S&F stainless steel decorative curtain rod of 25 mm bore (weight not less 400 gms per running meter) incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed. |
| 70 | S&F Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed. |
| 71 | Demoltion of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed. |
| 72 | S&F vitreous china wash down water closet pan (Pedestal Pan) including fixing bolts, flush pipe anti syphonage pipe, plastic water closet seat , black closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device etc, coloured closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 73 | S&F Oval shpaped vitreous china wash basin white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but including brackets and including, 32 mm bore waste CP coupling and 32mm bore LDPE pipe 600 mm long and 15 mm bore 450 mm long PVC connection etc complete all as specified and directed. |
| 74 | S&F PVC deo flushing cisrern valveless with flushing out valve low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc 15 mm dai bore PVC connection 450 mm long complete all as specified and as directed. |
| 75 | S&F Viterous China urinals, Full Stall stall type, complete including providing and fixing plugs, beddings urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing with brackets, flush pipe, incl urinal spreader 15 mm bore, suitable size of 15 mm bore PVC connection 450 mm long and 40 mm dia bore 600 mm long LDPE incl 40 mm dia bore waste coupling etc complete all as specified and as directed. |
| 76 | S&F in repairs 15 mm dia bore Brass Brass CP mixer (Wall, Sink and Basin mixer) for mixing hot & cold water screwed down for iron pipe and fixed etc complete all as specified and as directed. |
| 77 | S&F 15 mm dia bore Bib Cock long body with wall falnges of Cat Part No - P-6808 of Marco series of Prayag incl fixing etc complete all as specified and as directed. |
| 78 | S&F 15 mm dia bore CP fancy type long body Angular stoop cock cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed of Cat Part No - P-6808 of Marco series of Prayag etc complete all as specified and as directed. |
| 79 | S&F Bib Cock 2 way double handle with CP flange fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed etc of Cat Part No - P-6812 of Marco series of Prayag etc complete all as specified and as directed. |
| 80 | S&F in bevelled edge looking mirror 7 to 8 mm thick area exc 1.0 sqm but not exc 1.50 sqm mirror of selected quality glass fixed with 4 nos of Studs incl polishing the edges etc complete all as specified and as directed. |
| 81 | S&F 15 mm dia bore Brass health faucet with 1.00 mtr tube & hookd incl fixing etc of Cat Part No -CPHF-6 of Prayag etc complete all as specified and as directed. |
| 82 | S&F Jet Spreay SS-20 (Butterfly) with 1.0 mtr tube incl fittings of Cat Part No -CPJ-5 of Prayag etc complete all as specified and as directed. |
| 83 | S&F ABS soap dish with brass stand of Cat Part No -CAP-4 of Parayag series incl fixing etc complete all as specified and as directed. |
| 84 | S&F Stainless Steel Towel Rail Cubix of Cat Part No - CPA-46 of Prayag series incl fixing etc complete all as specified and as directed. |
| 85 | S&F Brass Towel ring with Round Flange of Cat Part No - CPA-2 of Prayag Jaquar series incl fixing etc complete all as specified and as directed. |
| 86 | S&F GI Tubes, 15 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 87 | S&F GI Tubes, 20 mm dia bore of pies 'medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. |
| 88 | S&F rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed. |
| 89 | S & F 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and as directed. |
| 90 | S&F 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed. |
| 91 | S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed. |
| 92 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed. |
| 93 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed. |
| 94 | S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed. |
| 95 | S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed. |
| 96 | S&F 110 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 97 | S&F 75 mm dia bore PVC (SWR) junction single, (Single T) equal or unequal with access door etc complete all as specified and as directed. |
| 98 | S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed. |
| 99 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 100 | M&L for laying of PVC (SWR) 150 mm dia bore of pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors etc etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed. |
| 101 | M&L Polyethylene Septic Tank of 50 user, Black Colour, Diameter of pipe 1600mm, length 3200, wall thickness 16mm, no of chamber 03 nos , no of maholes 0-2 nos, size of manhole 550mm dia with 160mm dia int let and out let pipe with Provn of Air Vent pipe incl fixing arrangement etc complete all as specified and as directed. Notes : Excn, PCC RFR and Removal shall be measured and paid sepaterly under relevant items |
| 102 | M&L Polyethylene Septic Tank of 15 user, Black Colour, Diameter of pipe 1000mm, length 2800, wall thickness 10mm, no of chamber 03 nos , no of maholes 0-2 nos, size of manhole 550mm dia with 110mm dia int let and out let pipe with Provn of Air Vent pipe incl fixing arrangement etc complete all as specified and as directed. Notes : Excn, PCC RFR and Removal shall be measured and paid sepaterly under relevant items |
| 103 | M&L Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.2x1.50 mtr dia etc complete all as specified and as directed. |
| 104 | M&L Soakage wells excavation, in any type of soil, foundation in PCC (1:3:6), walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80x3.00 mtr dia etc complete all as specified and as directed. |
| 105 | S & F posts and struts as in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 etc complete all as specified and as directed. |
| 106 | S&F mild steel screw bolts (machine made) with hexagonal or spuare heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square not n.exc 5 cm long and diameter of shank 5 to 10 mm complete all as directed. |
| 107 | Fixing only galvanised chain link fencing of mesh size (100mmX100mmX4.00mm /75mmX75mmX3.15mm)) size and any type of standards, rails, straining bolts, etc. including provission of binding wire etc complete all as specified and as directed. |
| 108 | S&F galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and orovising of galvanised mild steel wire, staples or steel pins, etc. complete all as directed. (Note :Each line wire measured) |
| 109 | S&F barbed razor type concertina coil of 610 mm dia (when unstretched) fixed between the existing ‘V’ angle post and barbed wire over security wall /PCC /ground as per requirment with coil of coverage 6.00 running metre per coil, weight of each coil 9.50 to 10.00 Kg hot dip galvanized and binding with and including MS annealed wire of 0.90 mm , complete all as specified and directed. |
| 110 | Supply only Mild Steel TMT round bars 10mm dia and over, cut to length, bent to shape required, includingcranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed. |
| 111 | Supply only galvanised chain link fencing of mesh size (100mmX100mmX3.15mm / 75mmX75mmX3.15mm) etc complete all as specified and as dicected. |
| 112 | M&L for Preparation of new plastered surface of wall and applying two coat of cement base paint etc complete all as specified and as directed. |
| 113 | S&F door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with alumnium die cost body etc complete all as specified and as directed. |
| 114 | S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators/Partition etc with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed. |
| 115 | S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminiam door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. [Note : Particle Board & Glass shall be measured and pard separately under respective items] |
| 116 | S&F Aluminium Powder Coating (minimum thickness of powder coating 50 micron frame in aluminium partions having horizontal & vertical distance between two frames not exc 1.00 m & section of size 50 mm x 44.5mm of 2 mm thickness of such type arrangement for fixing glass/pre-laminated board on both/one side complete with fixed in brick masonary/conc work by necessary drilling & rawl plug arrangement in (floor/glass/etc.) [Note : Glass / particle board shall be measured and paid separately under respective items] |
| 117 | S&F 8 mm Aluminium composite panel, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc omplete all as specified and as directed. |
| 118 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 1.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Conceled Conduit with all accessories including fabricated MS/PVC terminal boxes fixed flush box and cover plate ( for modular Switch socket ) with wall surface for mounting switches, sockets, regulator etc including 1.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly all as specified for One light or fan point controlled by one 5 Amps switch one way complete all as directed.. |
| 119 | All as per item serial No 118 here-in-before but One 3 pin socket outlet 6 amps on the same board with other switches. |
| 120 | S&F switch modular type 6 Amp 240 Volts single one way (ISI marked). |
| 121 | S&F modular socket, 6 Amp 2/3 pin combined, 2 module complete all as specified and as directed. |
| 122 | S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body complete all as directed. |
| 123 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative batten type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 124 | Supply and fixing in repair LED light fitting with high out put diffuser 2 feet, 10 watt 220 V AC with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 125 | S & F in repair LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 126 | Supply & fix MCB DB of sheet metal enclosure double door SPN 4 way with 200 A rated bus bar and grouted in wall with PCC(1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 127 | S&F MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 128 | S&F in repair/replacement MCBs, SPN 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) complete all as specified and directed. |
| 129 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 130 | S&F in repair/replacement LED 60 W building secruity light made up of pressure die cast housing with high efficient LED as lighting source and PC cover having TOP Opening separate driver compartment with IP66 protection and impact resistance of IK07 and suitable for dia upto 43 mm complete all as specified and directed. |
| 131 | M&L for building secruity light bracket made out of 40 mm bore medium grade GI Pipe with two sets clamps, with nuts and bolts, bend to shape for fixing street light luminaries all as directed, length of GI Pipe shall not be less than 2.0 mtrs complete all as specified and directed. |
| 132 | Earthing complete with GI earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level sorrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt fliing in alternate layers etc and connected to and including galvanised earth lead wire 4 mm upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected by light grade 20 mm dia GI pipe connected to main control board and GI pipe medium grade 40 mm bore for watering and including funnel, wire mesh, charcoal salt etc RCC pit cover flush to earth pit 50mm thick reinforced with 8mm TMT bar 100mmC/C and PCC chamber pit with PCC (1:3:6) type C1 (using 20mm graded aggregate) including excavation and earthwork disposal of surplus soil to distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009. |
| 133 | S& F steel tubes medium grade galvanised 20 mm bore with all fittings and fixed complete to walls and ceilings and laid in floors complete all as directed. |
| 134 | S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed 20mm bore complete all as specified and directed. |
| 135 | Cutting existing steel tubing of 40mm for alterations or additions complete all as directed by engineer-in-charge. |
| 136 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete all as specified and directed. |
| 137 | Supply and spreading fine dry river sand for cushing to UG cable including spreading levelling and hand punning etc complete all as specified and directed. |
| 138 | M&L for bricks sub class ‘B’ brick old size for cable protection laid in flat in trenches over the cable perpendicular to the direction of cable complete all as specified. |
| 139 | M&L Point wiring with PVC insulated and unsheathed cable single core multistranded copper conductor 2.5 sqmm size, 1100 volts, FRLS grade cable conforming to IS-694 1990 drawn in and including PVC Casing and Caping with all accessories including fabricated MS/PVC terminal boxes fixed flush with wall surface with 3mm thick masonite laminated sheet top cover fixed with brass screw for mounting switches, sockets, regulator etc including 2.5 sqmm single core PVC insulated and unsheathed copper conductor earth continuity conductor to common earth and connecting to earth dolly for 6 pin 15 Amps switch socket combination outlet on independent board all as specified and directed . |
| 140 | S&F switch socket combination 5-in-1 , 3 pin , 5 and 15 Amp PVC type universal complete all as specified and as directed. |
| 141 | Supply, fixing and testing of Storage type electric water heater of capacity 25 ltrs with BEE 5 star rated, 230 V, maximum power consumption 2 KW, Drypowder Fero Glass coating Technology for inner container and Heavy Duty seamless Incoloy /Monocloy 800 Glass lined heating element, vertical wall mounting complete with all accesories and PVC connecting pipe with whirl technology 15 mm bore 450mm long 2 Nos for hot and cold water supply with two years warranty on product, 7 years warranty on inner container & 4 years warranty on heating element. |
| 142 | M&L for laying GI tubing 15mm bore galvanised with all fittings and fixed complete to wall and ceilings or laid in floors all as specified and as directed. |
| 143 | Cutting existing steel tubing 15 mm for additions/insertion new tees/elbows by screwing exsiting pipe complete all as specified and as directed. |
| 144 | S&F for Bib tap fancy type made up of cast copper alloy with Chromium plated 15mm bore with crutch or butterfly handle, screwed down, screwed for iron pipe high pressure fixed on wall all as specified and directed. |
| 145 | M&L for stop valves 15mm bore, fancy type chromium plated cast copper alloy, screwed down, high pressure with crutch of butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 146 | M&L for Sub main wiring with 2 runs of 6.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 6 Sqmm cable and 1 run of 6 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 147 | M&L for Sub main wiring with 2 runs of 4.0 sqmm, single core,FR-LSH PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20mm dian non metallic PVC grey conduit with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4.0 sqmm single core FR-LSH PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and type of conduit complete all as specified and directed. Note: 2 run of 4 Sqmm cable and 1 run of 4 Sqmm cable along with conduit altogether shall be measured as one unit. |
| 148 | S&F in factory made, sheet steel distribution boards, TPN, 4 Way, double door,with provision for FP MCB as incomer and SP MCBs as outgoing complete and grouted in wall with PCC (1:2:4) type B-1 using 20 mm graded stone aggregate all as directed. |
| 149 | S&F in MCB Tripple pole & neutral 40 to 100 Amps in accordance with IS/IEC 60898-1, 415 V, 50 Hz,10 kA,C-series rupturing capacity providing in DB complete all as specified. Make :- Legrand / Siemens/Schnider. |
| 150 | S&F in MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) Make :- Legrand/ Siemens/Schnider/L&T Please Enable Macros to View BoQ information |
| 151 | S&F in MCBs, SP 6 to 32 Amps In accordance with IS/IEC 60898-1, 240 V, 50 Hz, 10 kA ,C-series marked fixing in DBs (DBs catered separately in this Schedule) Make :- Legrand/ Siemens/Schnider/L&T Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender