Tender For Construction Work Of Building Expansion In Primary Health Center Premises In Gram Panchayat Akhalaspur Development Block Ramnagar.
Tender Value
35.62 Lakhs
Estimated cost
Bid Submission
30 Oct 2026
0 days left
EMD
3.57 Lakhs
Bank guarantee accepted
Document Fee
2714
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ambedkar Nagar → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Work Of Building Expansion In Primary Health Center Premises In Gram Panchayat Akhalaspur Development Block Ramnagar.
BOQ
| Sl. No. | Item Description |
| 1 | (A) BUILDING WORK Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.DSR 2.6.1 |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating eachdepositedlayerbyramming and watering, lead up to 50 and for all lift. DSR 2.25 |
| 3 | Supplying and filling in plinth with sand under floors,including watering, ramming, consolidating and dressing complete.DSR 2.27 |
| 4 | Providing and laying in position cement concrete of specified grade - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from naturalsources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4.1.8 |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mmnominal size derived from natural sources) DSR 5.1.2 |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).DSR 5.3 |
| 7 | Centering and shuttering including strutting, proppingetc. and removal of form forFoundations, footings, bases of columns, etc. for mass concrete DSR 5.9.1 |
| 8 | Centering and shuttering including strutting, proppingetc. and removal of form forspended floors, roofs, landings, balconies and access platformDSR 5.9.3 |
| 9 | Centering and shuttering including strutting, proppingetc. and removal of form forLintels, beams, plinth beams, girders, bressumers and cantilevers DSR 5.9.5 |
| 10 | Brick work with common burnt day (non modular)bricks of dass designation 150 in foundation and plinthin:Cement mortar 1:6 (1 cemtmt: 6 coarse sand)DSR 6.1.2 |
| 11 | Brick work with common burnt clay (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 ( 1 cement: 6coarsesand)GROUND FLOOR DSR 6.4.2 |
| 12 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level DSR 6.13.2 |
| 13 | Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-In) derived from natural sources : 4 graded stoneaggregate 12.5 mm nominal size derived from natural sources) DSR 4.1 |
| 14 | Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. DSR 4.13 |
| 15 | Providing and injecting chemical emulsion for precocotructional antitermite treatment and creating a chenucal barrier under and alround the coloumn pitswall tench basement excavation top surface if plinthfilliing junction of wall and floor along the external prinmer of binding expansion joints,surroundingofpipesandconduitsetc.complete(plinth area of the building at ground floor only shall be measured as per I.S.6313(Part 111981) aldrine emulsifiable concrete or any other approved material such as hepthachlor or chlordance will be used. as per MR |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more DSR 5.22.6 |
| 17 | Providing and fixing bright /matt finished Stainless Steel Door Bolt of approved quality & make with necessarv screws etc all comolete.MR |
| 18 | Providing and fixing bright /matt finished Stainless Steel Tower Bolt of approved quality & make with necessarv screws etc all comolete.250x10mm MR |
| 19 | Providing and fixing bright /matt finished Stainless Steel Tower Bolt of approved quality & make with necessarv screws etc all comolete.150x10mm MR |
| 20 | Providing and fixing bright /matt finished Stainless Steel handle of approved quality & make with necessarv screws etc all comolete.with 125 mm DSR 9.165.1 |
| 21 | Providing and fixing 150mm bright finished floor brass door stopper with rubber cushion ,necessary brass screws etc .to suit shutter thickness complete DSR 14.34. |
| 22 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. DSR 9.84 |
| 23 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1 |
| 24 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).DSR 9.26 |
| 25 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer .Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)DOOR FRAME DSR 10.15.1 |
| 26 | Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)window DSR 10.11.1 |
| 27 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes DSR 10.30.1 |
| 28 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete DSR 10.25.2 |
| 29 | Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.with 12 mm mild steel u beading DSR 10.29 |
| 30 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete20 mm dia DSR 9.46.2 |
| 31 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 10.28 |
| 32 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”: DSR 22.7 |
| 33 | 12 mm cement plaster of mix DSR 13.4.2 |
| 34 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand) DSR 13.5.2 |
| 35 | 6 mm cement plaster of mix :DSR 13.16.1 |
| 36 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)DSR 13.5.1 |
| 37 | Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections DSR 5.3 |
| 38 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 39 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR 8.31 |
| 40 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete11.41.2 Size of Tile 600x600 mm |
| 41 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.1 Polished Granite stone slab of colour Black, Cherry/RubyRed or equivalent |
| 42 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red 8.2.2 |
| 43 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand)11.20.2 Medium shade pigment using 50% white cement 50% Grey cement |
| 44 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour13.41.1 New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 45 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: 13.47.1 New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm |
| 46 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.dsr 13.80 |
| 47 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : .1 Two or more coats applied on walls @0.90 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR 13.48.3 |
| 48 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : .1 Two or more coats applied on walls @0.90 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR 13.48.2 |
| 49 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete DSR 12.22 |
| 50 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.12.41.2 |
| 51 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion12.42Coupler 110 mm |
| 52 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion12.42110 mm bend |
| 53 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion12.42110 mm Shoe |
| 54 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete dsr 12.43.2 |
| 55 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.DSR 12.44 |
| 56 | Construction of Apron Drain(analysis) |
| 57 | Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.DSR 4.17 |
| 58 | Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).DSR 6.44 |
| 59 | (B)PLUMNING & SANITRY WORKS Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :DSR 19.15.1 |
| 60 | Provoding and fixing CI tee at the inlet and outlet of the septic tank |
| 61 | Provoding and fixing 75 mm dia vent pipe DSR 17.35.2 |
| 62 | Provoding and fixing of 75 mm dia Sand cast iron S&S asper IS -3989 DSR 17.56.2.2 |
| 63 | Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality.Circular shape 500 mm internal diameter DSR 19.19.2.2 |
| 64 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.DSR 19.32.1 |
| 65 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:DSR 17.2.1 |
| 66 | Providing and fixing wash basin with brackets,with CI brackets, 15 mm C.P. brass pillar taps,32 mm C brass waste of standard pattern, including paintngi of fittings and brackets, cutting and making gc the walls wherever require. White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap DSR 17.7.4 |
| 67 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.DSR 8.5 |
| 68 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32 mm dia17.28.2.1 |
| 69 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Circular shape 450 mm diaDSRB17.32.1 |
| 70 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.DSR17.33 |
| 71 | Provoding and fixing toilet paper holder .CP Brass dsr 17.34.1 |
| 72 | Supply and fixing of UPVC S.W.R. pipe type -B confirming to 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T& .Required for proper completion of the work 90 mm OD |
| 73 | Supply and fixing of UPVC S.W.R. pipe type -B confirming to 13592 including jointing the pipes with rubber ring, lubricant and UPVC SWR cuplar confirming to IS - 14735. Also including excavation of trenches cutting of walls and holes and repairing the walls floors and refilling the trenches as before but excluding supply and cost of other fittings such as elbow, bead, tee and Y-tee including supply of all material labour and T& .Required for proper completion of the work 110 mm OD |
| 74 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete110 mm dia .DSR 12.43.2 |
| 75 | Supply and fixing of UPVC S.W.Rdoor bend confirming to IS -14735MR 90 mm size |
| 76 | Supply and fixing of UPVC S.W.Rdoor bend confirming to IS -14735110 mm sizeMR |
| 77 | Supply and fixing of UPVC S.W.Rplain Tee confirming to IS -14735 90 x90x90 mm size |
| 78 | Supply and fixing of UPVC S.W.Rplain Tee confirming to IS -14735 110x110x110 mm size |
| 79 | Supply and fixing of UPVC S.W.Rplain bend confirming to IS -1473590 mm size |
| 80 | Supply and fixing of UPVC S.W.Rplain bend confirming to IS -14735110 mm size |
| 81 | Supply and fixing of UPVC S.W.R Door Y confirming to IS -1473590 mm size |
| 82 | Supply and fixing of UPVC S.W.R Door Y confirming to IS -14735110 mm size |
| 83 | Supply and fixing of UPVC S.W.R Cowel confirming to IS -14735. 110 mm size |
| 84 | Supply and fixin g of UPVC S.W.R. Nahni trap size 100/75 , 100/90 mm confirming to IS - 14735 self cleannig design fixed in PCC 1:2:4 and supply Eat and fixing of 125mm dia heavy duty CP brass jali as per MR |
| 85 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms DSR 17.71 |
| 86 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gmsDSR 17.72 |
| 87 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms DSR 17.73.2 |
| 88 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. DSR 18.1020 mm dia nominal outer dia pipee |
| 89 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. DSR 18.1025 mm dia nominal bore |
| 90 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall. DSR 18.1032 mm dia nominal bore |
| 91 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge25 mm dia nominal bore |
| 92 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge32 mm dia nominal bore |
| 93 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.15 mm dia nominal bore |
| 94 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.20 mm dia nominal bore |
| 95 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. 40 mm dia nominal bore DSR 18.12.5 |
| 96 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :25 mm dia nominal bore |
| 97 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm dia nominal bore |
| 98 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :25 to 40 mm nominal bore DSR 18.13.1 |
| 99 | Providing and fixing uplasticised PVC connection pipe with brass unions :15 mm nominal bor DSR 18.21.2.1 |
| 100 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlelet 100 mm diameter DSR 18.22.1 |
| 101 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia |
| 102 | Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.DSR 18.53 A |
| 103 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work20 mm dia nominal outer dia pipee |
| 104 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work25 mm dia nominal outer dia pipee |
| 105 | Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work32 mm dia nominal outer dia pipee |
| 106 | Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :40 mm dia nominal bore DSR 18.40.5 |
| 107 | Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work40 mm dia nominal bore DSR 18.41.5 |
| 108 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complet20 mm dia nominal outer dia pipee |
| 109 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 . 15 mm nominal boreDSR 18.49.1 |
| 110 | Providing and fixing C.P. brass long body of approved quality conforming to IS:8931 . 15 mm nominal boreDSR 18.51.1 |
| 111 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal boreDSR 18.53 |
| 112 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge DSR 17.16A |
| 113 | Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m DSR 2.10.1.2 |
| 114 | Supply and fixing of UPVC S.W.R. pipo type -I) mnfirtning to IS. 13592 including lointinp, the pipen with (libber ting, tubtieant and UPVC $WR cuplnt «mfirntinp, to IS - t'i7X5. Also including excavation of ttvncltes cutting of walls and and tVlMifiti8 the (loot* and tefilling the trenches as lx•totv but excluding supply and cost of othot fittings such as elbow, bead, lee and Y-tee including sttppty of nuttetiol labour nnd T&t' .Required for proper cotupletion of the work 160 mm OD |
| 115 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design. 150 mm diameter pipe .DSR 19.2.2 |
| 116 | Supply and fixing of UPVC S.W. R. Gully trap confirming to IS - 14735 size 150x110 mm dia of self cleaning design including fixed brick Masonary chamber 250x250x250mm Size i/ c supply and fixing of CI cover with frame weight not less then 4.50Kg. & CI grating 150x150mm complete all respect. |
| 117 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 900x800 mm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :DSR 19.7.1.1 |
| 118 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 1200x1200 mm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :DSR 19.7.2.1 |
| 119 | Extra for depth for manholes :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. size 900x 800 mm DSR 19.8.1.1 |
| 120 | Extra for depth for manholes :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5. size1200x900 mm dsr 19.8.2.1 |
| 121 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 18.48 |
| 122 | (C) ELECTRIC WORK Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable etc. as required.DSR 1.10 |
| 123 | Wiring for light/ power plug with 2X4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 124 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 125 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 126 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 127 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch |
| 128 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 A socket outlet |
| 129 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 130 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 131 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 132 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 133 | Installation, Testing and Commissioning of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as requiredUpto 450 mm sweep |
| 134 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 135 | Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing |
| 136 | Installation, Testing and Commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS/HFFR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. |
| 137 | Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\" curve including connections, painting etc. as required.DSR 2025 1.57 |
| 138 | Supplying and fixing PVC batten/ angle holder including connections etc. as required. |
| 139 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)2.4.3 8 way (4 + 24), Double door. |
| 140 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C curve, miniature circuit bmakcr suitable for inductive load of following poles in thc existing MCB DB complete with connections, testing and commissionin etc. as required. |
| 141 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 142 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.2.15.2 40 A |
| 143 | Supply and fixing of 40 Amp .FP MCB (10 KA)C Curve .CAT A MR |
| 144 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides, and with inscription in single red colour on front side as required |
| 145 | Supply and burying of Safe Earthing Electrod T-39 Zn-Zinc Coated, Length 3000mm, outer 76.3 mmx3.2mm. inner 42.4mm x 2.6 mm, terminal Dia 12mm, coating 80-I(X) micron filled with crystalline conductive mixture (CCm) having anti corrosive & conductive prtFty NIR with KF activated soil OFC) capable of reducing the soil resistivity Each with good mixture of retaining capacity along with N) cm square Cl. frame with hinged cover & masonary housing. (From electrode terminal to switch of 25x3 G.I. Strip will extra) Make : As approved in U.P.P.W.D. & CP-R.I. Certified AS PER MR |
| 146 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)DSR 5.9 |
| 147 | Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factornotlessthan0.9,ServiceValue(CM/M/W)minimum as below, 350 RPM (tolerance as per IS : 3742019),THD(TotalHarmonicDistortion)less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) DSR 9.2.3 |
| 148 | LED BULB 18 WATT |
| 149 | LED BULB30 WATT |
| 150 | Supplying and laying of aluminium conductor PVC insulated armoured sheathed cable volts served sheathed grade at thc depth of 750 mm ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on side and on top .On surface the cable run shall fixed on MS clamps etc-of suitable size or as directed by th Engineer-Incharge ,complete in all repect.llie armouring of the cabl shall properly connæted with the earth conductor by clamps etc. Followin size 10 mmsqm x4core Dsr 20a1.8 |
| 151 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 10 sq. mm (25mm)DSR 11.1.32 |
| 152 | Fire Extinguishers.Non -Schedule Items Supply and fixing Of fire extinguisher, 6M kg. capacity (ISI Marked IS : & TAC approved) complete with initial charge andwall bracket, along with supply of all materials and Iatxjur for proper comp etion of workAS Per MR |
| 153 | Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion Of work .AS Per MR |
| 154 | Supply & fixing of 12 watt LED Bulb - B22 / E27 (Colour Temp.6500 K- / Lumens - 1m) day light. Input Volts (AC 3- rating suitable for Batten/ Angle holder including making conn«tion.Com lete in all respect .AS Per MR |
| 155 | Supply & fixing of225/300 mm sweep ventilating (Light Duty) exhaust fan complete with Metallic Blade (Steel bird guard protecto/copper motor for high air suction performance /Capacitor etc.), Noise level : (45 50) dB, rower consumption : 45 W, Rated voltage : 230 V, Ratedf uency : 50 Hz, Motor type Normal S . Complele in all respect. |
| 156 | Supply & fixing of400 mm sweep wall mounted (Light Duty) fan complete with Plastic Blade & Pull Cord (Adjustable upward and MR downward tilt / motor /capacitor etc.) Oscillation degree -90 ,power consumption 60 W ,Rated voltage :230 V ,Rated Frequency 50 Hz ,Speed : 1350 RPM Complele in all respect. |
| 157 | EXTERNAL WATER SUPPLY Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc .40 mm nominal bore DSR 18.12.5 |
| 158 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end). 40 mm nominal bore DSR 18.17.3 |
| 159 | Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :DSR 18.33.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 23, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedOct 30, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayOct 30, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender