Tender For Comprehensive Maintenance To Offrs Md Accn At Leimakhong Mil Stn (Phase-Ii) Under Ge 869 Ews.
Tender Value
10 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
18 days left
EMD
20000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leimakhong → Manipur
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Comprehensive Maintenance To Offrs Md Accn At Leimakhong Mil Stn (Phase-Ii) Under Ge 869 Ews.
BOQ
| Sl. No. | Item Description |
| 1 | Schedule 'A' |
| 2 | Material and labour for complete removal of existing treatment on wall surface and applying primer/ chalk whiting or with wall putty and applying two coat of oil emulsion distemper complete all as specified and directed. |
| 3 | Material and labour for preparation of surface wall for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Deopt Tinted) with silicon additives @ 1.43 litre/ 10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sqm over new surfaces complete all as specified and directed. NOTE: - Rates deemed to be inclusive of scaffolding up to the height of 12 mtr at required places. |
| 4 | Preparation of old plastered surfaces of walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying one coats of cement base paint including necessary scaffolding complete all as specified and directed. |
| 5 | Preparation of old decorated surfaces of walls including brooming, down scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of white wash on wall on old decorated surfaces complete all as specified and directed. |
| 6 | Preparation of old decorated surfaces of ceiling including brooming, down scraping down smoke soot, moulds, masss and efflorscent salts and trading oil and greasy spots & removing of nails mark & applying one coat of white wash on ceiling on old decorated surfaces complete all as specified and directed. |
| 7 | Mateirial & labour for Preparation of old decorated surfaces of wall including washing, rubbing down and stopping of distempered and painted surfaces ,brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and applying one coat of oil emulsion distemper complete all as specified and directed. |
| 8 | M&L for preparation of old painted surefaces of wood based material exc 10 cm width or girth & applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and directed. |
| 9 | M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 10 | Taking down cement plaster of any thickness on brick or stone walls etc including raking out joints, hacking for key and scrubbing down with water built in cement mortar complete all as specified and directed. |
| 11 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.( Source of sand-Dimapur sand)Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account |
| 12 | Supply only Integral WaterProofing Compound ISI Marked complete all as specified and directed. |
| 13 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces of wall finished even and fair without using extra cement complete all as specified and directed.( Source of sand-Dimapur sand) |
| 14 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 15 | M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper paint over a coat of primer and 1mm thick wall care putty complete all as specified and as directed. |
| 16 | M&L for rendering 5mm thick on fair face of brick work or concrete surface of ceiling in CM 1:3 finishing even and smooth without using extra cement complete all as specified and as directed. |
| 17 | M&L for preparation of surfaces plastered or unplastered new surface on ceiling and applying three coats of white washing complete all as specified and as directed. |
| 18 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed. |
| 19 | S&F in replacement stainless steel plate rack of size 24\\" x 36\\" x 10\\" complete all as specidfied and directed. |
| 20 | Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position, Capacity exc 250 litrs n exc 500 litrs, cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc complete all as specified and directed. |
| 21 | S&F in repair rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed. |
| 22 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specidfied and directed. |
| 23 | S&F floor door stopper of aluminium alloy body and tongue with hard drawn steel spring with 140mm overall length of cover plate complete all as specidfied and directed. |
| 24 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 25 | S&F 12mm thick Medium density fibre board, exterior grade, fixed to timber framework with screws complete all as specified and directed |
| 26 | S&F 30m wide continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specidfied and directed. |
| 27 | S&F 40mm dia cupboard knobs fixed with nuts, screw and washer of mild steel bright finish complete all as specidfied and directed. |
| 28 | S&F in repairs magnetic door catches of standard size for cup board door approved complete all as specified and as directed. |
| 29 | S&F in repair vitreous china squatting pan \\"Orissa\\" pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) with 'P' or 'S\\" trap from or back inlet etc including connection to trap and flushing pipe and provision of lime concrete bedding complete all as specified and as directed. |
| 30 | S&F in repair Vitreous china wash basin, white flat back shape, including pedestal type of size 550 x 400 mm excl taps, waste chain and plug and porcelain stopper but incl brackets, waste pipe & CP waste coupling complete all as specified and as directed. |
| 31 | S&F in repair Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 32 | S&F in repair 15 mm CP brass central hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe, complete all as specified and directed |
| 33 | S&F in repair 10 ltrs capacity high or low level flushing cistern PVC of selected white valveless syphonoic action type inlet ball valve float and handle 10 ltrs discharge capacity complete including PVC connection and brackets complete all as specified and as directed. |
| 34 | S&F in repair PVC (SWR) floor trap with grating with incl jointing to waste pipe fixed in cement concerete (1:2:4) Type B1 diameter of outlet pipe 75mm complete all as specidfied and directed. |
| 35 | S&F in repair PVC connection 15x600mm long with PTMT nuts & bolts complete all as specidfied and directed. |
| 36 | S&F in repair fancy type 15mm bore bib taps, cast copper alloy, chromium plated long shank with capastain head screwed down for iron pipe or for brass ferule complete all as specified and directed. |
| 37 | S&F in repair stop valves, ISI marked, 15 mm dia cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type) screwed down high pressure, screwed both ends for iron pipe or unions complete all as specified and directed. |
| 38 | S&F in repair brass chromium plated shower roses 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union any colour for fixing with 15mm pipe complete all as specified and directed. |
| 39 | S&F in repair brass chromium plated, 600mm long between flanges tubular towel rail , 20mm dia, D type. fixed with and including chromium plated brass screws and wooden plastic cleats, complete all as specified and directed. |
| 40 | Taking up or down 15mm dia of steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed. |
| 41 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 42 | S&F in repair PVC soil, waste and rainwater (SWR) drainage pipes 110mm bore single socketd in any length with rubber rings joints fixed to wall and laid in floors weight of pipe not less than 0.70 Kg/Rm complete all as specidfied and directed. |
| 43 | S&F in repair PVC soil, waste and rainwater (SWR) drainage pipes 75mm bore single socked in any length with rubber ring joints fixed to wall and laid in floors weight of pipe not less than 0.70 Kg/Rm complete all as specidfied and directed. |
| 44 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store & rubish of the permises complete all as specidfied and directed. |
| 45 | M&L for non skid coloured ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by engr-in-Charge |
| 46 | M&L for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) 75mm thick as in sub base complete all as specidfied and directed. |
| 47 | M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in levelled course finish even and fair for tile finishes specified and directed. |
| 48 | M & L for Glazed Coloured Ceramic tiles in vertical surface 350x250x7mm / 450x350x7mm thick set and joint in neat cement slury and pointed in white or colour cement to match over and including 10mm thick plaster in CM 1:4 as backing coat to receive tiles complete all as specified and directed. |
| 49 | S&F in repairs fancy type Harrison rails, andodised aluminium alloy with fixing brackets, stops, rollers etc, of 20mm dia for window and doors with curtain rings and decorative doom holders fixed to wall with screw complete all as specidfied and directed. |
| 50 | Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
| 51 | Taking down copper/ aluminium point wiring ie. light, fan, socket or power/points complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 19 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender