Tender For Special Repair To Bldg No T-78 (Sig) & Toilet Of Bldg No T-120 (Adm Block) Under Ge Dehradun..
Tender Value
38.73 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
3 days left
EMD
77460
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Dehradun → Uttarakhand
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No T-78 (Sig) & Toilet Of Bldg No T-120 (Adm Block) Under Ge Dehradun..
BOQ
| Sl. No. | Item Description |
| 1 | DESCRIPTION OF ITEMS |
| 2 | Demolition brick or stone masonary built in cement mortar including all quoins arches pillars etc but excluding ashlars facing dressed stone work and precast concrete block, complete all as specified and as directed by Engr-in-Charge. |
| 3 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level). |
| 4 | Material and Labour brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified |
| 5 | Ditto as item No. 03 above, but except brick complete all as specified. |
| 6 | Taking down cement plastering of any description on brick/stone/concrete wall surfaces of any description incl racking out joints hacking for key,scrubbing down with water etc. complete all as specified and as directed. |
| 7 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished surfaces even and smooth complete all as specified and as directed by Engr-in-Charge. |
| 9 | Material and Labour for preparation of newly plastered surface of wall and applying two coat of cement base paint over a coat of primer complete all as specified |
| 10 | Material and Labour for preparation of newly plastered surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified |
| 11 | Material and Labour for preparation of old decorated surface of wall and applying two coats of oil bound distemper complete all as specified |
| 12 | Taking down wooden chowkhats or frames with shutters area n. exc 1.5 sqm each (without taking off shutter from the frame) complete. |
| 13 | Taking down wooden chowkhats or frames with shutters area exc. 1.5 Sqm but not exceeding 4 Sqm each complete. |
| 14 | Supply and Fixing Pressed steel frames of size 105x65 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified (Note: framed filled in cement concrete1:2:4 type B0 using 12.5 mm graded stone aggregate) |
| 15 | Material and Labour mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, ball bearing and other similar works etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding complete all as specified |
| 16 | Material and Labour 35mm thick 2nd class hard wood factory made plain framed panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed. |
| 17 | Supply and Fixing mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 including necessary welding, drilling hole complete. |
| 18 | Supply and Fixing factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed by Engr-in-Charge.Make : ECHON/ Kumar Tech/ TVL Engineers Ltd (Floresta)/ Rajshree |
| 19 | Supply and Fixing 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity by Engr-in-Charge.Make : ECHON/ Kumar Tech/ TVL Engineers Ltd (Floresta)/ Rajshree |
| 20 | Supply and Fixing of steel ventilators, fixed/ hinge type, with glazing bars complete all as specified and directed. |
| 21 | Supply and Fixing factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay,tower bolt etc. complete with glazing bars, dovetailed or welded complete all as specified. |
| 22 | Supply and Fixing factory made steel window with side hung shutters including box type hinges with steel handle, steel peg stay, tower bolt etc.complete without glazing bars, dovetailed or welded complete all as specified. |
| 23 | Supply and Fixing stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified |
| 24 | Supply and Fixing 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in square area n. exc. 0.5 Sqm in each pane complete all as specified. |
| 25 | Supply and Fixing stainless steel barrel tower bolts 150 mm long one piece and fixed complete all as specified |
| 26 | Supply and Fixing mild steel butt hinges, medium weight 100 mm long one piece and fixed with screws/welded to frame ,complete |
| 27 | Supply and Fixing stainless steel handles 125 mm long one piece and fixed with screws/welded to frame ,complete |
| 28 | Supply and Fixing 300 mm long stainless steel sliding door bolt (bolt not less than 12 mm dia) with hasp & staple and fixing clips of SS sheet, and SS fixing bolts and fixed complete. |
| 29 | Material and Labour floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete. |
| 30 | Taking down/ dismantling asbestos (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified. |
| 31 | Dismantling of framed or unframed timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 33 | Supply and Fixing for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed. (Note: Hollow steel sections will not be used against this item). |
| 34 | Supply and Fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 35 | Supply and Fixing Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and profile should match with galvalume sheet complete all as specified and as directed. |
| 36 | Material and Labour applying two coats of synthetic enamel paint on new or previously untreated steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete. |
| 37 | Material and Labour applying one coat of synthetic enamel paint on old painted steel surfaces of any description including preparation of steel surfaces complete. |
| 38 | Material and Labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel Paint complete all as specified |
| 39 | Material and Labour preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of creosote oil Paint complete all as specified |
| 40 | Material and Labour for 25 mm thick cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregate) as in floor finished complete all as specified and as directed. |
| 41 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified nad directed. |
| 42 | Supply and Fixing non-skid coloured ceramic tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the existing surfaces including 15 mm thick screed bed in cement mortar 1:6 complete. |
| 43 | M &L Glazed Ceramic tiles coloured, of size 300 mm x 450 mm x 7 mm thick approved 1st quality as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. |
| 44 | Material and Labour double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished,area of each tiles exceeding 0.36 sqm and not exceeding .42 Sqm , in floor etc. Set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 and dismantling of existing floor tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified. |
| 45 | All as per itme No 37 here in above but as in skirting and including 10 mm thick rendering in cement mortar 1:4, complete all as specified. |
| 46 | Material and Labour for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. |
| 47 | Material and Labour 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement in ground floor and paving below or above ground level complete all as specified and directed. |
| 48 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing. |
| 49 | Taking up or down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing. |
| 50 | Material and Labour cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth. |
| 51 | Supply and Fixing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing. |
| 52 | Supply and Fixing medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 20 mm bore GI tubing. |
| 53 | Supply and Fixing in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm all as specified and directed. |
| 54 | Supply and Fixing in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete. |
| 55 | Supply and Fixing in repair of Vitreous china wash down water closet pan (pedestal pattern) dual flush single piece EWC fancy type, white including flushing cistern, Plastic water closet seat, white, closed pattern with flat bottom, and cover etc complete all as specified and directed by Engineer in Charge. |
| 56 | Supply and Fixing in repair 10 litre capacity PVC low level cistern ‘ white’ with inlet, float valve including brackets with 32 mm dia PVC pipe/bend 600 mm long complete. |
| 57 | Supply and Fixing in repair75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall / laid in trenches complete all as specified |
| 58 | Supply and Fixing in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring, fixed on wall/ laid in trenches complete all as specified |
| 59 | Supply and Fixing in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete |
| 60 | Supply and Fixing in repair 110 mm bore UPVC (SWR) bend with oval acess door ,'T'socket reducer etc complete |
| 61 | Supply and Fixing in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fitting etc complete. |
| 62 | Supply and Fixing in repair pillar taps, brass, with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 63 | Supply and Fixing in repair CP brass 3 in 1 hot & cold 15 mm dia wall mixer for mixing hot and cold water with telephonic shower provn with connecting legs &flanges complete all as specified and directed. |
| 64 | Supply and Fixing in repair 15mm dia brass chromium plated centre hole wash basin/ sink mixer with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. |
| 65 | Supply and Fixing in repair brass chromium plated ovehead shower with shower arm complete all as specified and directed. |
| 66 | Supply and Fixing in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed. |
| 67 | Supply and Fixing in repair 15mm bore Bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 68 | Supply and Fixing in repair CP Health Faucet with 1.20 mtr metalic expandable tube & hook complete. |
| 69 | Supply and fix in repair CP grating 100mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed. |
| 70 | Supply and Fixing in repair looking mirror mounted on decorative type PVC frame fixed to wooden plug with CP brackets screw fixed, complete all as specified . |
| 71 | Supply and Fixing in repair 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed. |
| 72 | Supply and Fixing in repairs brass chromium plated towel ring complete all as specified. |
| 73 | . Supply and Fixing in repairs chromium plated Toilet paper holder complete. |
| 74 | Supply and Fixing in repair 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified |
| 75 | Supply and Fixing in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete. |
| 76 | Supply and Fixing as in repair rotational moulded polyethylene water storage tanks Capacity of tank 500 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete |
| 77 | Supply and Fixing as in repair rotational moulded polyethylene water storage tanks Capacity of tank 1000 litres tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete |
| 78 | Material and Labour in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete. |
| 79 | Supply and Fixing ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore size (Minimum weight 210 gms) complete. |
| 80 | Providing & fixing false ceiling of Designer tile Ivory painted (High Pressure Steam cured) of 4mm thickness (as per IS : 14862) of size 595x595mm and any one of the design (Cascade or electra) in true horizental level, suspended on inter locking metal grid of hot dipped galvanised steel section (Galvanised @120 grms, both side inclusive and black painted groove on all T webs) consisting of main T runner with suitably spaced joints to get required length and 15x32mm made from 0.30mm thick sheet spaced at 1200mm c/c and croos 'T' of size 15x32mm made of 0.30mm sheet 1200mm long spaced between main \\"T\\" at 600 mm c/c to form a grid of 1200x600mm and secondary cross \\"T\\" of length 600mm and size 15x32 mm made of 0.30mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable wire of 4mm dia with galvanised butterfly level clips, spaced at 1200mm c/c along main 'T', bottom exposed width of 15mm of all 'T'' sections of 4mm dia GI wire shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5mm width, including taking down existing ceiling of any type all complete at all heights as per direction of Engineer-in-Charge. |
| 81 | Material and Labour cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required. |
| 82 | Material and Labour for PCC 1:3:6 type C-1 using 20 mm graded stone agg as in plinth protection finished surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 83 | Material and Labour PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in benching to drain, holdfast, padding to roof/chhajja, coping, bed block etc. and the like edge slightly rounded or chamfered including necessary use and waste of form work and demolition of existing old cement concrete (un-reinforced) not exc 15 cm thick in ground floor and paving below or above ground level complete. |
| 84 | Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in soft/loose soil complete all as specified and directed by Engr-in-charge. |
| 85 | Material and Labour PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete, sub base or leveling course of floor etc complete all as specified. |
| 86 | Material and Labour PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channel and drain including necessary use and waste of form work complete all as specified |
| 87 | Returning, filling in including spreading, leveling watering and well ramming in layers not exceeding 25 centimetre in soft/loose soil complete all as specified and directed by Engr-in-charge. |
| 88 | Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engr-in-charge. |
| 89 | Material and Labour Hardcore of broken bricks or boulder gauge exc 63 mm but n. exc 100mm, deposited , spread and levelled in layers n.exec 15 cm thick, watered and rolled/rammed to a tue surface complete all as specified. |
| 90 | Material and Labour 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone agg as in sub base complete all as specified and as directed. |
| 91 | Material and Labour for sand filling under floors or in foundations including spreading & levelling complete all as specified directed. |
| 92 | Material and Labour for pre-painted coloured (Red/Yellow) machine pressed precast concrete interlocking paver blocks of any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment complete all as specified and directed. |
| 93 | Taking down carefully copper /aluminium point wiring (light, fan , socket or power ) any type including unscrewing from board,fitting and fixture such as switches, ceiling roses, holders, regulators sockets ,light fittings etc removing materials from site and making good disturbed with the existing surfaces complete all as directed. |
| 94 | Dismantling and taking down carefully sub-main wiring/service wire of any size including wooden batten etc and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified |
| 95 | Dismantling and taking down carefully existing DB’s any type and making good the disturbed surfaces of wall/floor to match with the existing wall/floor etc. complete all as specified |
| 96 | Material and labour for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLSH) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed / Surface conduit as per existing and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface,provision of CI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-(a) One light/fan/bell/exhaust fan point controlled by one, one-way P/ type switch 5/6 Amp. |
| 97 | All as per item No-4 here in before but One 3pin 5 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed. |
| 98 | All as per item No-4 here in before butOne 3pin 5 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed . |
| 99 | Material and Labour Point wiring with 2.5 Sqmm (Nominal area) FRLSH PVC insulated and unsheathed single core cable 1100 volts grade with stranded copper conductor in and including concealed rigid PVC conduit(ISI marked) medium grade of size not less than 20 mm dia including accessories incl cutting chases and making surface good etc along with contineous earth wire 2.5Sqmm FRLSH PVC insulated , unsheathed stranded copper conductor cable and connected to common earth dolly, including metal flush box with white cover plate & frame for modular switch & socket complete with all accessories for (a) one three pin 15 Amps Switch Socket outlet on independent board |
| 100 | Supply and fixing switch Piano flush type single pole one way 230 Volts 6 Amps ,Complete all as specified and directed by Engr- in charge. |
| 101 | Supply and fixing switch Piano flush type single pole one way 230 Volts 15 Amps ,Complete all as specified and directed by Engr- in charge. |
| 102 | Supply and Fixing Socket outlet 3 pin , 230 Volts 5/6 Amps multipurpose 5 pin complete all as specified and directed. |
| 103 | SSupply and Fixing Socket outlet multipurpose having provision for 3 pin, 230 Volts 15/16 Amp and 3 pin, 5/6 Amp, piano flush type complete all as specified. |
| 104 | Supply and Fixing ceiling rose 3 terminal / PVC/ polycarbonate, isolated body ISI marked all as specified and directed. |
| 105 | Supply and fixing batton holder ISI Marked mounted on wall including 09 Watt LED Bulb all as specified and directed. |
| 106 | Supply and fixing step type electronic fan regulator flush type 120/280 V all as specified. |
| 107 | Supply and Fixing in replacement energy efficient LED tube light fitting 20 watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling complete all as specified and directed.. |
| 108 | Supply and fixing LED luminaire 600mm X 600mm, 35/36 watt, 220V AC recessed type with high efficiency PMMA diffuser soft glair free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed. |
| 109 | Supply and Fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with IP 65/66 protection complete including bracket made out of 32 mm bore medium grade GI pipe made to shape with bolts, buts & washers of min 1.2 Mtr incl grouting of nuts or fasteners clamps and conductor to fitting with 3 core 1.5 sqmm PVC insulated cable complete all as specified . |
| 110 | Supply and fixing sub main wiring two single core 4 sq mm PVC insulated unsheathed stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface on wall along with 4 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed |
| 111 | Supply and fixing sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated busbar all as specified and directed .Make- legrand/ Hair/ Schnider |
| 112 | Supply and fixing in repairMCB SP 6 to 32 Amp 'C' series 10 KA repturing capacity complete all as specified. |
| 113 | Supply and fixing in repair MCB isolator SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified. |
| 114 | Supply and Fixing in repair MCB TPN 63 Amps rating 240V, 10KA 'C' curve complete all as specified and directed. |
| 115 | Supply and fixing sheet metal enclosure double door type for MCBs DB TPN 415V AC 4 way with 200 Amps rated bus bar. all as specified and directed . |
| 116 | Supply and fixing in Replacement ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFMwith service value 6.00, BEE Five star rated with brushless direct current motor (BLDC) including provision of cable flexible 3 core of suitable size wire from ceiling rose to Ceiling Fan complete all as specified and directed. |
| 117 | Material and labour for fixing or passing through pipe, laid in trenches, fixed on wall, LT panel board, XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sqmm 3.5 core with required aluminium cable lugs, lugs should properly crimmping with crimpping tools, heat shrink joints, Colour code heat shrink sleeves at both cable ends , cable gland for cable safety when passing through panel holes, including laying cable route indicators of suitable size RCC or steel type as per site requirement all as specified and directed. by Engr-in-charge. |
| 118 | Excavation in trenches soft/loose soil not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth and getting out excavated soil/sand/unsv LT Cable for laying of cable and getting out. |
| 119 | Sand cushioning and covering of UG cable using crushed metal sand in trenches for cable protection all as specified and directed. |
| 120 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard /loose soil complete all as specified and directed by Engr-In-Charge. |
| 121 | Removing excavated material n. exc 50 mtr and depositing where directed at a level n. exc 1.5 mtr above the starting point complete all as specified. |
| 122 | Material and Labour for brick well burnt Class ‘B’ as cover to U/G cable laid dry flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over under ground cable for cable protection in trenches all as specified and directed |
| 123 | Material and Labour for GI Tubing Light grade 40 mm dia(ISI marked) with all fitting/acessories complete all as specifid and as directed. |
| 124 | Material & labour for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. ( earth pit not less than 2.25 mtr depth below ground level at any type of strata ) with top edge of the earth plate not less than 1.5mtr below normal ground level connected by 4 mm GI wire as earth lead by means of brass nuts and bolt,thimbles check nuts, washers including concrete chamber of PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish, internal surface of concrete chamber shall be given internal dia 300mm x300mm, 15mm thick plaster in CM 1:4 funnel with wire mesh, RCC pit cover of 320x320x80mm size (1:2:4) Type B1 using 20mm graded stone aggregate rainforced with XPM and charcoal, dust and common salt all as shown in electrical plate No 3 of MES SSR Part-1(2009) and specified including and provision of GI wire upto 7.5 mtrs long with 15 mm dia light grade Gi pipe protection and watering pipe of GI 20 mm bore, medium grade, including all exavation and earth work and connecting the earthing strip to panel, including testing on completion complete all as specified and directed by Engr-in-charge. Note:- (i) RCC pit cover shall be precast of RCC(1:2:4) type B1, 80mm thick rainforced with XPM weighting not less than 4kg/sqm in lieu of CI cover.(ii) Cost of additional GI wire more than 7.5 mtrs will be measured and paid seperately under relevant items. |
| 125 | Note : Tenderers may note that amount of credit Rs 52940.00 will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 22, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender