Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58167445

Tender For Special Repair To Bldg No. 98 Of Single Offrs Accn Under Ge (W) Colaba

Issued by Statutory Bodies & Commissions/Committees · Mumbai, Maharashtra
Tender Value
2.70 Crore
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
3.45 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No. 98 Of Single Offrs Accn Under Ge (W) Colaba

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-Nov-2026

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO. 98 OF SINGLE OFFRS ACCN UNDER GE (W) COLABA
Sl. No. Item Description
1M&L for carefully chipping and removing existing external plaster, up to 25 mm thick for all heights of building, using a low-impact, high-frequency hammer/chipper, without damaging the original sound brickwork or concrete, including raking out of joints, daily cleaning and stacking of debris, removal and disposal of debris from the site of work, complete in all respects, as specified and as directed. Note: For all the Height of Bldg.
2M&L for carefully chipping and removing existing internal plaster, up to 12 to 15 mm thick, using a low-impact, high-frequency hammer/chipper, without damaging the original sound brickwork or concrete, including removal of POP/Gypsum plaster, if any, from walls of any thickness, raking out of joints, daily cleaning and stacking of debris at the prescribed location in polypropylene/paper bags, and disposal of the debris so generated on a weekly basis outside the premises of MD Land, complete in all respects and as directed.Note: For all the Height of Bldg.
3M&L for Providing and applying average 25 mm thick plaster on external surfaces of wall, in two coats (15mm + 10mm) using ready-mix, pre-packed and proportioned dry-mix mortar, blended with polypropylene (PP) fibers and mixed with liquid waterproofing compound, on external surfaces of non-fair-faced brick masonry or concrete surfaces, including surface preparation, transportation of materials, mixing, application, finishing, curing, scaffolding, tools and equipment, and all incidental works, complete in all respects as per the specifications and directions of the Engineer-in-Charge.Note :- (i) Liquid water proofing compound will be measured and paid seperately as supply only(ii) For all the Height of Bldg
4Supply only liquid waterproofing compound in Cement Mortar while plastering the external and internal faces of the Building.
5M&L for providing and applying average 15 mm thick plaster on internal surfaces of wall, using ready-mix, pre-packed and proportioned dry-mix mortar, blended with polypropylene (PP) fibers and waterproofing additives, on external surfaces, including surface preparation, transportation and handling of materials, mixing, application, finishing, curing, scaffolding, tools and equipment, and all incidental works, complete as per the specifications and directions of the Engineer-in-Charge.
6M&L for providing and applying average 5 mm thick plaster in two coats on ceiling surfaces using ready-mix, pre-packed and proportioned dry-mix mortar, blended with polypropylene (PP) fibers and waterproofing additives, including surface preparation, transportation and handling of materials, mixing, application, finishing, curing, tools and equipment, and all incidental works, complete as per the specifications and directions of the Engineer-in-Charge.
7Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces complete all as specified and directed.
8M & L for preparing old plastered surfaces of external walls by scrapping / rubbing and applying two coats of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including use of scaffoldings complete all as specified and directed
9M&L for applying two coats of oil bound distemper over a coat of primer for the new plastered sufrace of wall and plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
10M&L for complete removal of existing treatment of internal surfaces of wall and applying two coats of oil bound distemper over a coat of primer and plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.
11M&L for applying two coats of oil bound distemper over a coat of primer for the new plastered of ceiling surface prepare the surface even and smooth complete all as specified and directed.
12M&L for chipping and removing unsound, loose or weak concrete of any thickness from slabs, beams, columns and other RCC members, using manual chisels and/or standard power-driven percussion tools of approved make, including tapering of all edges, forming square shoulders to the cavities, thoroughly cleaning the exposed concrete surfaces and reinforcement using wire brushes and/or suitable approved methods, collecting and disposing of all chipped concrete and debris for all leads and lifts, including all labour, tools, equipment and incidental works, complete in all respects as specified and directed by the Engineer-in-Charge.
13M&L for providing and applying DuraClean-WR for cleaning TMT reinforcement bars, steel structures and other exposed structural steel surfaces, including removal of existing rust and corrosion, loose concrete, laitance, scale and other loose/unsound particles by water-jet cleaning, grinding with grinder machines, wire brushing and/or other approved mechanical or manual means, including preparation of the metal surface, application of DuraClean-WR as per the manufacturer’s recommendations, tools, equipment, labour, transportation, and all incidental works, complete in all respects as specified and directed by the Engineer-in-Charge
14M&L for Providing and applying corrosion-preventive protective coating on prepared TMT reinforcement bars, structural steel and other exposed metal surfaces, including surface preparation by approved manual and/or mechanical methods, removal of rust, scale, loose particles and contaminants, and application of the corrosion-preventive coating in the specified number of coats and thickness as per the manufacturer’s recommendations. The item shall include the cost of all materials, machinery, tools, equipment, labour, transportation, handling, insurance charges and all incidental works, complete in all respects as per the specifications and directions of the Engineer-in-Charge
15M&L for providing and applying one coat of structural-grade cementitious bonding coat to the prepared concrete surface to be repaired and strengthened, prior to the application of polymer-modified repair mortar, to ensure proper adhesion and monolithic action between the existing concrete substrate and the new repair material. The item shall include surface preparation, mixing, application, tools, equipment, labour and all incidental works, complete in all respects as per the manufacturer’s specifications, project specifications and directions of the Engineer-in-Charge.
16M&L for repair of deteriorated/damaged RCC elements using powder-based Polymer Modified Repair Mortar (PMM), including cleaning and preparation of concrete surfaces, application of approved epoxy bonding coat and placement of PMM while the coat is tacky, in layers of maximum 25 mm average thickness. For subsequent layers, apply one coat of Polymer Modified Cement Slurry bonding coat over the preceding layer before applying the next mortar layer. Mixing, application, finishing and curing shall be strictly as per the manufacturer’s recommendations and approved technical specifications, including all materials, labour, tools, equipment, scaffolding, transportation, handling and incidental works, complete as directed by the Engineer-in-Charge.
17M&L for providing, mixing and placing micro-concrete for repair and strengthening of RCC structural elements, including substrate preparation, mixing, pumping/placing, compaction, finishing and curing; providing, erecting, sealing and dismantling leak-proof formwork/shuttering with all necessary supports, joints and sealing arrangements to prevent leakage; and all required manpower, tools, machinery, equipment, transportation, handling and incidental works, complete as per approved technical specifications and directions of the Engineer-in-Charge
18M&L for drilling 10/12 mm diameter holes, approximately 75 mm deep, in RCC members using heavy-duty electrically operated hammer drills, at 500 mm c/c or suitable spacing/grid in staggered/zig-zag arrangement as directed, including thorough cleaning of holes with compressed-air jet or other approved methods; providing and fixing prefabricated L-shaped 8 mm diameter TMT/reinforcement bar shear connectors of approximately 100 × 50 mm, coated with approved anti-corrosive protective coating, with 75 mm length inserted into the holes and the remaining portion projecting outside the concrete with a 50 mm bend, for tying and securing additional reinforcement bars to existing RCC members. The item includes drilling, hole cleaning, fabrication, anti-corrosion coating, fixing/anchoring, all materials, labour, tools, equipment, consumables and incidental works, complete as per technical specifications and directions of the Engineer-in-Charge.
19S & F for CRS TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height complete all as specified and as directed.
20M&L for providing and fixing 12 mm diameter injection nozzles at the identified crack locations at 500 mm c/c spacing, including drilling/preparation of holes, fixing and sealing of nozzles, all necessary materials, labour, tools, equipment and consumables, complete in all respects as per the technical specifications and directions of the Engineer-in-Charge.
21M&L for providing and grouting drilled holes/identified voids in concrete and/or masonry structures using Poly-Ceramic Cementitious Grout comprising NicGrout G-06 and 53-grade cement in the required proportion and quantity, to reduce porosity/permeability and enhance structural strength and integrity. The item includes preparation and cleaning of holes; providing, fixing and connecting grouting pipes/nozzles; grout mixing and preparation; pumping and pressure grouting using suitable machines, mixers, hoses, fittings and equipment; sealing of grout holes after completion; and all materials, machinery, manpower, tools, tackles, consumables, safety arrangements, transportation, all leads and lifts, and incidental works, complete as per approved technical specifications and directions of the Engineer-in-Charge.
22M&L for pressure injection grouting of approved Polyurethane (PU) Foam Grout of S.P. Concare make into identified cracks, voids and/or cavities using suitable pressure epoxy injection equipment/injector with all necessary accessories, hoses, fittings and connections. Injection shall be carried out under controlled pressure through the installed injection nozzles until the respective nozzle refuses to accept further grout, indicating satisfactory filling of the cracks/voids. After completion of injection and refusal, the injection nozzles shall be sealed/cut off and finished with approved thixotropic epoxy putty. The item shall include all materials, grout, machinery, equipment, tools, accessories, labour, consumables, safety arrangements and incidental works, complete in all respects as per the manufacturer’s recommendations, technical specifications and directions of the Engineer-in-Charge.
23M&L for providing and installing sustained-release corrosion-inhibiting caplets (Powerthrow Capsules) to arrest and control the corrosion process of embedded reinforcement bars in RCC structural members such as columns, beams and slabs. The work shall include drilling 20 mm diameter holes to an approximate depth of 30 mm at suitable locations in the RCC members, cleaning the drilled holes, inserting the approved sustained-release corrosion-inhibiting caplets into the holes, and sealing the holes completely with approved epoxy putty to prevent ingress of moisture and contaminants. The item shall include all materials, caplets, epoxy putty, drilling equipment, tools, machinery, labour, consumables, safety arrangements and incidental works, complete in all respects as per the manufacturer’s recommendations, approved technical specifications and directions of the Engineer-in-Charge.
24M&L for breaking and removing existing waterproofing layers comprising I.P.S. (Indian Patent Stone) flooring with bituminous joints, brick bat concrete, cement vat and associated waterproofing treatment over existing terrace floors, chajjas, headroom slab tops and canopies, including careful dismantling and removal up to the top surface of the RCC slab so as to fully expose the RCC slab without causing damage to the existing structural concrete. The item shall include breaking, dismantling, removal, collection, loading, transportation and disposal of all dismantled materials and debris for all leads and lifts, including all necessary labour, tools, machinery, equipment, safety arrangements and incidental works, complete in all respects as specified and as directed by the Engineer-in-Charge.
25M&L for PCC (1:2:4) B-0 (using 12.5 mm graded stone aggregate) as in levelling course/ padding course over RCC roof surface including rounded or chamferred on edges etc., with approved water proofing compound all as per manufacturer's instructuions on the roof surface to achieve requisite slope all as specified and directed. (Note :- Water proofing compound shall be measured & paid separately under relevent item of this schedule).
26M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) and on primed surface by forced application complete all as specified as under :- (a) Cleaning existing surface properly. (b) Apply oil bound bitumen primer @ 0.40 lit/Sqm manufactured by the same agency as that of APP with a density of 0.87 -0.89 Kg/Lit at 25 Degree Centigrade on the prepared dry roof surface. (c) Providing and Laying APP modified water proofing membrane reinforced with non wooven polyster matt with physical propertities as under :-(i) Membrane weight >3.6 Kg/Sqm .(ii) Net wooven polyster weight >160 gm/Sqm(iii) Softening point of membrane > 150o C(iv) Joint Tensile strength Longitudiual > 650 Sq Cm at 230o C & Transverse > 450/ Sq cm (v) Tear strength - Longitudual > 300 N & Transverse > 250 N Direction(vi) Elongation > 30 %(vii) Impermeability under water pressure > 3 Kg/Sq cm (d) Over the membrance provide a finishing with solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane Note:- APP membrane shall be laid using butane torch by Torch application with minimum 10 cm side overlap and 15 cm end lap. The laying of membrane shall be got done through authorised applicator of manufacturer of membrane.
27Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and removing from site complete all as specified and directed.
28M & L for brick work with flyash modular size bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed.
29Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the primises complete all as specified and directed.
30M&L for non skid ceramic digital coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and directed. Please Enable Macros to View BoQ information
31M&L for non skid ceramic digital coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry over and including 15 mm thick screed bed in cement mortar 1:6 and pointed in white or coloured cement to match complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58167445
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 2.70 Crore
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No. 98 Of Single Offrs Accn Under Ge (W) Colaba
Basic Detail
Tender No 84701
Bidding Type Tender
Location
City Mumbai
State Maharashtra
Key Dates
Publish Date 19 Nov 2026
Submission Date 26 Nov 2026
Open Date 03 Dec 2026
Finance
Tender Value 2.70 Crore
Tender Fee 2000
EMD 3.45 Lakhs
Exemption Available
Document List
21388d33-2c73-4e6a-9ba8-09ef5f160fc2.html
BOQ_891832.xls
Tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 19, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 4 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Dec 03, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 11 days

Tender Documents

Download All (ZIP) ↓
html

21388d33-2c73-4e6a-9ba8-09ef5f160fc2.html

xls

BOQ_891832.xls

pdf

Tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender